How to send HTML emails with embedded graphics?

I've discovered Mail is great for sending HTML if you open it in Safari and select "Mail Contents of this Page" - - My problem is, I need to include the graphic elements as embedded images rather than hosted images.
Is there any way to do this with Mail.app?
Can I somehow modify my HTML image references to make this happen?
Is there another Mac application recommended to do this?

The best thing I've tried is Max Bulk Mailer. Do a search for it on VersionTracker. It's about $50. or so.
If you're just looking to send one offs, you can do it with a hotmail account - just make sure you pull out the doctype tag (you should do this for any html email).

Similar Messages

  • When I forward an HTML email with embedded graphics to someone, it forwards it as plain text.. this is driving me batty.. how do I forward such mails INTACT??

    I have the latest Thunderbird installed on a new 64-bit Winblows Eight netbook.. fantastic program, but one problem is driving me absolutely batty, and after using the latest Thunderbird for weeks, I simply can't figure out how to fix it..
    I'm on a lot of mfr. and other kinds of mailing lists, like eBay watch list alerts, and so on.. these are not s p a m (although I get plenty of that.. who doesn't).. but lists I WANT to be on..
    Many such emails from those mailing lists are in HTML format with embedded graphics.. I'm not talking about graphic file attachments, but embedded graphics which are coming from the senders' servers, and appear AS a graphic in the email.. sometimes such emails are one huge graphic with hardly any text.. all well and good..
    However, here's the problem.. when I want to forward such an email to a friend, Thunderbird ALWAYS formats it as plain ASCII text.. I know this because I look in the "sent mail" folder, and can see that it has turned an HTML email with embedded graphics into plain ASCII text..
    I absolutely can't figure out how to get it to forward an HTML email with embedded graphics INTACT, so the sender receives it looking the way it looks when I receive it from a mailing list, or an advertiser, or eBay, or whoever..
    Is Thunderbird capable of forwarding an HTML email with embedded graphics INTACT?.. If so, how / where do I turn on that capability?..
    If the capability to do this isn't built into the program, is there an add-on I can install that will give it that ability?..
    I am not new to computers.. but this really has me stumped.. I want to put Thunderbird on my 32-bit Vista laptop and stop using its horrible "Windoze Mail" program, which I've been using for years, and is slower than snot, and has all kinds of other problems..
    So, assuming whoever reads this FULLY understands my question, PLEASE tell me how to get Thunderbird to have the ability to forward an HTML email with embedded graphics AS-IS, so the receiver(s) I forward it to see it exactly the way I see it when I receive it.. if that ability is built in, please tell me how to turn it on.. if that ability is not built-in, please tell me what add-on I need to install to give Thunderbird this capability.. if Thunderbird absolutely can't forward an HTML email with embedded graphics at all, please also tell me that..
    A virtual box of candy and a dozen long-stemmed roses to anyone who can give me a solution that works..
    Thanks..

    Dear Mr. Toad (my all-time favorite ride at Disneyland ;-) ..
    Thanks so much for your detailed reply.. my netbook is in the bedroom, turned off.. I (so far) only use it in the evening, in the bedroom.. I've saved your response, and will try your suggestions, and let you know if they solve the problem I described. I really appreciate you taking the time to post such a detailed reply..
    I can't answer your Thunderbird "configuration" questions, because I'm in the living room, using the crap Vista laptop, on which I plan to install Thunderbird, and then take Windoze Mail out in the street and drive over it a few times.. I'll get back to you one way or the other, and let you know if your instructions solved the problem, or not..
    I don't understand why Thunderbird "out of the box", so to speak, simply doesn't forward HTML emails with embedded graphics, (like Outlook Excess, and Winblows Mail do).. without having to go through those steps. I personally HATE HTML email, but over the years, it's become more and more prevelant.. so it's a problem I must fix..
    Thanks again..
    Harv..

  • UTL_SMTP send HTML email with embedded image?

    Hi, I can use UTL_SMTP to send an HTML email ok, but does anyone have an example of how to include an inline embedded image in the email? Thanks!

    If you want to send the html page and have it
    reference the images and css files on your web
    site, that's pretty easy. Just create a message
    with text/html content that is your html page.
    If you want to include all the images and css files
    in your message along with the html page, you'll
    need to create a multipart/related message and
    you'll need to change all the html to reference the
    images and css files using "cid:" references.

  • How to send HTML email with variable substitution in the email body section?

    Does anyone have some scripting examples that create a HTML formatted e-mail with the ability to have some fields be variables?
    I'm familiar with updating a XML document using a template file and the "keyword transform" function in the script.
    (Like setting an emergency close for a queue for example)
    I've also successfully written a script that sends an e-mail with a .wav file attachment.  I think I have the basics down on the e-mail part.
    Using the keyword transform gives me an xml document that shows the tags as well as the desired variable.  Functional but not very attractive
    The issue I'm really struggling with is the formatting of the e-mail body.
    Is there a way to have a "prettier" document with some basic HTML tags that allow the same function?
    For example I'd like a sentence in the body of the e-mail to say
    "Call received from number <VariableOfCallingNumber>  at <TimeVariable>
    I can do this in the subject easily enough but adding together some strings and variables. 
    I could do the same thing in the e-mail body DOC[], but as I understand it, I could only get 1 line so it would be pretty limited
    Can anyone point me in the correct direction?
    Thanks !!

    sorry, not possible
    http://stackoverflow.com/questions/5620324/mailto-with-html-body
    https://www.google.com/search?rlz=1C1CHFX_enUS566US566&{google:acceptedSuggestion}oq=mailto+with+mime+type&sourceid=chro…

  • Send HTML Email with Embedded Images and CSS

    Hi All,
    I have a html page. I want to send that html page(not with attachment) with all images and css. i search and try but I cant find a good solution. can any one help... plz..........
    Thank You.....

    If you want to send the html page and have it
    reference the images and css files on your web
    site, that's pretty easy. Just create a message
    with text/html content that is your html page.
    If you want to include all the images and css files
    in your message along with the html page, you'll
    need to create a multipart/related message and
    you'll need to change all the html to reference the
    images and css files using "cid:" references.

  • How to send html email made in dreamweaver

    how to send html email made in dreamweaver

    Make sure you upload all of the images used in your email to a server you control. Then, change your image paths to point to those uploaded images with absolute links.
    You will get marked as spam if you attempt to send images as attachments to a large list of recipients and most email clients won't download images to begin with, so make sure your html email makes sense with broken pictures.
    CSS support is spotty across email clients, if you use css, make sure it's inline, not embedded in the <head> or externally linked in the <head>. Some email clients strip out the <head> section entirely.
    Basically, you need to design your html email as if you haven't moved out of the 90's yet, as far as web design is concerned, in order to get maximum cross client compatibility.
    Then, when you're ready, I would suggest using a service like www.icontact.com or www.constantcontact.com if your subscriber list is anywhere over 100 or so recipients.

  • How to send html email notification in bpel

    hi gurus,
    i want to send html email notification from bpel.
    before, i already successful send html email with attachment, but when i send an email without attachment, then the body message will turn into a plain text.
    as i check from the email accepted, email with attachment will have a mime type "text/html" but if no attachment then it will be "text/plain"
    from the bpel configuration, by default the mime type already set to "text/html; charset=UTF-8", below is the sample configuration in my bpel process
    [quote]
    <copy>
                                    <from>string('text/html; charset=UTF-8')</from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content/ns10:MimeType</query>
                                    </to>
                                </copy>
    [/quote]
    i think this suppose to be a easy configuration, but i'm not sure whether i miss something in configuration the email process or this is a bugs in bpel.
    environment:
    linux
    jdev 11.1.1.6
    do u guys ever facing a same problem or have a solution to this ? please throw some light.
    thanks
    ===
    update, i found a temporary solutions.
    so i add a attachment from the process design, and then i change it from the source.
    [quote]
    <copy>
                                    <from>
                                        <literal>
                                            <Content xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">multipart/alternative</MimeType>
                                                <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                    <MultiPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                        <BodyPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                            <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                            <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                            <BodyPartName xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                        </BodyPart>                                            
                                                    </MultiPart>
                                                </ContentBody>
                                            </Content>
                                        </literal>
                                    </from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content</query>
                                    </to>
                                </copy>
    <copy>
                                    <from>string('text/html; charset=UTF-8')</from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:MimeType</query>
                                    </to>
                                </copy>
                                <copy>
                                    <from>string('your message')</from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:ContentBody</query>
                                    </to>
                                </copy>
    [/quote]
    make sure you put the mime type multipart/alternative into the email payload content. by default, when you add attachment, it will generate mime type multipart mixed automatically.
    if you don't change it to multipart/alternative, your email will show a attachment, but actually your email doesn't contain any attachment.
    and then for the message and mimetype make sure you have that ns10:bodypart, because this email already been set as a multipart email.
    when you add attachment, by default it will generate 2 body part, first one is for the body message and the second one is for the attachment. since i only want to use the body message only, then i have to erase the second bodypart
    with this workaround, i can send a html email without attachment perfectly.
    but i have to take note, when i updating the email process from process design, then the source will be generated again automatically, and the edited one will be replaced.
    thanks.

    Make sure you upload all of the images used in your email to a server you control. Then, change your image paths to point to those uploaded images with absolute links.
    You will get marked as spam if you attempt to send images as attachments to a large list of recipients and most email clients won't download images to begin with, so make sure your html email makes sense with broken pictures.
    CSS support is spotty across email clients, if you use css, make sure it's inline, not embedded in the <head> or externally linked in the <head>. Some email clients strip out the <head> section entirely.
    Basically, you need to design your html email as if you haven't moved out of the 90's yet, as far as web design is concerned, in order to get maximum cross client compatibility.
    Then, when you're ready, I would suggest using a service like www.icontact.com or www.constantcontact.com if your subscriber list is anywhere over 100 or so recipients.

  • Sending HTML email with SO_DOCUMENT_SEND_API1

    Hi all,
    I have implemented a function module to send HTML emails with SO_DOCUMENT_SEND_API1.
    It works fine, but in every email I have at the end a CRLF which looks not very nice in MS Outlook.
    It seems that this will be added to every email in addition to my HTML text.
    Has anyone an idea how I can prevent this?
    Thanks in advance for your help.
    Best Regards,
    Marcel

    Hi Marcel,
    not only you can, you should use CL_BCS for sending of email. Although I expect it to be not too different from the old functions, it points to the object oriented future of SAP/ABAP. At least it should run more stable and SAP recommends to use it as a replacement for old functions.
    I came across one blog
    [Sending HTML Email from SAP CRM/ERP|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/2273]
    You may be careful with this one: Probably it's not exactly what you need.
    The one I love most for its simplicity is this one
    [Unknown thus unloved?|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/3443]
    although it does not mention HTML - I think easy for you to adapt. Compared  to functional SO_DOCUMENT.. approach the program will shrink.
    If you want to understand the concepts behind, nobody explains it better than
    [Thomas Jung: Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/789]
    or - if you still feel unsafe in oo environment -
    [Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/15408]
    Happy coding!
    Regards,
    Clemens

  • HOW TO SEND PERSONALIZED EMAILS (WITH SAME MESSAGE) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR NAME BUT NOT WHO ELSE IS GETTING IT

    HOW TO SEND PERSONALIZED EMAILS WITH THE SAME MESSAGE, BUT WITH THE INDIVIDUAL RECIPIENT'S NAME... (OR NAME AND THE EMAIL ADDRESS) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR OWN NAME WITHIN THE BODY OF THE MESSAGE TO THEM ?
    ALSO, HOW TO ELIMINATE ALL THE OTHER NAMES FROM THE LIST - SO THEY CAN NOT SEE WHO ELSE IS ON THE MAILING LIST, AND WHO ELSE IS GETTING THE SAME MESSAGE?

    In the csv file, the column headers must match the the special references in curly brackets.
    So you either change the column header in .csv file or the bit in the curly brackets in the Template email.
    To change the column header:
    In the example shown below, I wanted to use the first two columns
    'First Name', 'Last Name' note the exact spelling.
    I also wanted the email address which was in a column called 'Primary Email'.
    To make it easier for me, I copied the Primary Email column and inserted it into the third column position and then changed the column header name from 'Primary Email' to 'Email'. (This meant I still had the original column header just in case). see image below.
    But you could just change the column header name from 'Primary Email' to 'Email' without moving column about - up to you.
    At this point check that all the contacts do have a valid email address.
    then save the file.
    If you do not want to edit the .csv file, then you need to edit the template email.
    eg: {{First Name}} {{Last Name}} <{{Email}}>
    change to : {{First Name}} {{Last Name}} <{{Primary Email}}>
    If still having an issue, please post two images.
    One image needs to show the row of column headers used in .csv file.
    The other image needs to show the Template email, so I can see how you have used the curly brackets.

  • How to send a email with a link

    Hi All,
                I have a scenario where I have to send an email to a person informing him about the workitem
                Now this user is not a SAP user so i have to send a link to him of a web page where he will execute
                the work item.Please advice about how to send the email with a link.
    Thanks in Advance,
    Saket.

    Hi,
    If you are using a Workflow, in the send mail step type, simply write the e-mail link and press enter.
    when the user sees the same in the outlook, he will get them as a link but this does not happens when the mail is seen in the SAp INBOX.
    if you are using the FM, give the document type as 'HTM', to send mail.
    This will work for you.
    Let me know if u face any issues
    Regards,
    Kanika

  • How to send HTML mail with images multipart/related message

    Hi,
    Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful.
    Thanks

    Hi,
    Could any body tell me how to send HTML mail with
    ith images in "multipart/related" message,if any body
    can give the code ,it would be helpful.
    ThanksHi!
    Refer to
    http://developer.java.sun.com/developer/onlineTraining/JavaMail/index.html
    I've found it very helpful.
    Look at the last part for a code showing how to send HTML mail!
    Regards

  • How to send an email with an attachment to the customers email address.

    Hi friends,
    How to send an email with an attachment to the customers email address.
    the attachment will be in doc format.
    Having an Header
    the data which i am sending must be in a TABLE format
    with 5 columns.
    and each column must have a column heading
    Please guide me.
    Thanks in Advance,
    Ganesh.

    *& Report  ZEMAIL_ATTACH                                               *
    *& Example of sending external email via SAPCONNECT                    *
    REPORT  ZEMAIL_ATTACH                   .
    TABLES: ekko.
    PARAMETERS: p_email   TYPE somlreci1-receiver .
    *Here get the values of mail from the table adn6 for the customer address.
    TYPES: BEGIN OF t_ekpo,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
    END OF t_ekpo.
    DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
          wa_ekpo TYPE t_ekpo.
    TYPES: BEGIN OF t_charekpo,
      ebeln(10) TYPE c,
      ebelp(5)  TYPE c,
      aedat(8)  TYPE c,
      matnr(18) TYPE c,
    END OF t_charekpo.
    DATA: wa_charekpo TYPE t_charekpo.
    DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            w_cnt TYPE i,
            w_sent_all(1) TYPE c,
            w_doc_data LIKE sodocchgi1,
            gd_error    TYPE sy-subrc,
            gd_reciever TYPE sy-subrc.
    *START_OF_SELECTION
    START-OF-SELECTION.
      Retrieve sample data from table ekpo
      PERFORM data_retrieval.
      Populate table with detaisl to be entered into .xls file
      PERFORM build_xls_data_table.
    *END-OF-SELECTION
    END-OF-SELECTION.
    Populate message body text
      perform populate_email_message_body.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_message
                                          it_attach
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'DOC'
                                          'filename'
                                 changing gd_error
                                          gd_reciever.
      Instructs mail send program for SAPCONNECT to send email(rsconn01)
      PERFORM initiate_mail_execute_program.
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp aedat matnr
       UP TO 10 ROWS
        FROM ekpo
        INTO TABLE it_ekpo.
    ENDFORM.                    " DATA_RETRIEVAL
    *&      Form  BUILD_XLS_DATA_TABLE
          Build data table for .xls document
    FORM build_xls_data_table.
      CONSTANTS: con_cret TYPE x VALUE '0D',  "OK for non Unicode
                 con_tab TYPE x VALUE '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
       con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
       con_cret type c value cl_abap_char_utilities=>CR_LF.
      CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
             INTO it_attach SEPARATED BY con_tab.
      CONCATENATE con_cret it_attach  INTO it_attach.
      APPEND  it_attach.
      LOOP AT it_ekpo INTO wa_charekpo.
        CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                    wa_charekpo-aedat wa_charekpo-matnr
               INTO it_attach SEPARATED BY con_tab.
        CONCATENATE con_cret it_attach  INTO it_attach.
        APPEND  it_attach.
      ENDLOOP.
    ENDFORM.                    " BUILD_XLS_DATA_TABLE
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = pit_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    FORM initiate_mail_execute_program.
      WAIT UP TO 2 SECONDS.
      SUBMIT rsconn01 WITH mode = 'INT'
                    WITH output = 'X'
                    AND RETURN.
    ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    *&      Form  POPULATE_EMAIL_MESSAGE_BODY
           Populate message body text
    form populate_email_message_body.
      REFRESH it_message.
      it_message = 'Please find attached a list test ekpo records'.
      APPEND it_message.
    endform.                    " POPULATE_EMAIL_MESSAGE_BODY
    regards,
    venkat.

  • How can I forward email with embedded photos?

    How can I forward email with embedded photos so that the recipient gets them that way instead of all the text followed by all the photos?

    Hello,
    Thanks (or merci beaucoup).  I am using Mail version 5.2 (1278) that came with the iMac (Mac OS X 10.7.4).  When I forward the email to myself at my "me.com" email address from my "cox.net" email address, the photos come out as attachments even though they were embedded when I received the email on my cox.net email.   What setting(s) can I make to have it get to me.com the way it was in cox.net, i.e. embedded instead of as attachments?
    Lou Edwards

  • Send HTML emails with ODI

    Hi,
    I wish to send HTML emails with ODI but it seems not possible with the tool ODISendMail. Do you know a procedure to do it ?
    Thank you very much for your answers.
    Regards.

    Hello,
    Thanks but this article decribes an other tool that I don't have in my version. Maybe is it possible to send me the procedure XML to import it ?
    There is also a procedure available on the Oracle support (TRT_Send_Jython_HTML_Email.xml) but I don't know where I can download it... Do you ?
    Thank you very much

  • Mail: how to send out emails with graphics embedded?

    I'm just wondering if the protocol has changed ...
    I'm wanting to send out multiple emails with a graphic, that will open in diverse Browsers, Apple and PC.  Is there a way to do it without having to embed the graphic somewhere up on the web and write a bunch of html?
    Or, what IS the protocol these days?  A direct to a tutorial would be most appreciated,
    Ben

    If the graphics files are not uploaded to a web server, i.e., if you want them included in the email message, then they must be sent as attachments. That is the only way to send non-text via email. Different email programs have different ways of displaying attachments. Some will show only icons, some will only show a list of attachments. Some like Mail will show the contents of the graphic file within the message. If your recipient is using a program that cannot show embedded graphics, then nothing you do on your end will change that.
    Email simply not a medium in which you have precise control over what the recipient will see.

Maybe you are looking for