WB change with digital IR RAW file upon import, no presets applied
Hi all,
I was doing some digital IR work with my Nikon D50 and a wratten 89b filter. I had set the WB to green grass through the filter. I shot in RAW. Viewing on the LCD, which is, I think, using the embedded JPG in the RAW file, things looked good, with green foliage coming out as it should with the custom WB.
However, upon import, with no develop settings at all, the images basically "lost" their WB and went back to the magenta-looking images that you'd normally get with a daylight WB through the filter. The WB was set in LR as "as-shot."
Any idea what happened? I'll shoot some in JPEG today which will obviously lock the WB in-camera, but it was weird.
thanks,
allan
If the JPEG locks the WB for you, you could then, maybe, set the RAW to the same WB setting?
Then maybe a preset for WB might work?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/
Similar Messages
-
Does iPhoto change a RAW file upon import or export?
Hi! New Mac user here. Trying to get my workflows and backups going.
I created an iPhoto library from multiple sources: migration from PC, folders from backup HD, new photos from iPhone and camera memory card.
So I have one consolidated library that is almost 300Gb but I want to go through and remove and archive many of these, leaving only a much smaller working library with the archive copies of some originals stored somewhere else. These archive copies will not be referenced files, my plan is to export them from iPhoto, back them up to an external HD, and then delete them from the iPhoto library. If I ever decided to look at them again, I would import them from the archive HD.
Ideally, I should have imported all the files to my iMac desktop and then imported only what I wanted into iPhoto, but because everything is now consolidated (and the photos from the iPhone and camera memory card are erased), I don't want to wipe out my iPhoto library and start over. So I'm starting with this huge managed library and want to export a good part of it to what I will call "the archive" to cull it down.
My questions: Upon import, did iPhoto change the RAW master files, or will those be the same when I export them (assuming I made no edits)? Did iPhoto change the JPEGs or will those also be the same when I export them?
How do I export the files I want to save to the archive before deleting them from the iPhoto library?
Alternatively, I think I will use Aperture going forward for editing. Should I use that instead for trying to export these files?
Thank you for any assistance you can provide.
LCA
iMac 4 GB, 2.7 GHz, Intel Core i5
OS X 10.7.4
iPhoto 9.3.1
Aperture 3.3.1File -> Export and in the resulting dialogue set the Kind to Original
That will export a byte by byte copy of the file you imported, unchanged in any way.
Can I suggest another way of working. Why not have two Libraries? An archive and a working one?
The principle advantage is that you won't have to import pics to review them again later, just open the other library.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager -
Lightroom 5 is auto-developing raw files upon import on the canon 7d but not on the canon 5d mark3. I would prefer to do individual file developing in the develop module.
Go into preferences, select the Presets tab. Hit "Reset all Default Develop Settings". You probably by accident set a default Develop for the 7D. Also check that you don't have a preset selected in the import dialog.
-
Lightroom changes colour in my RAW files captured with NIKON D300
Dear All! Lightroom changes colour in my RAW files captured with NIKON D300. Some of the images are completely ruined. I am sure Adobe must be aware of this problem. What could be done? Is there a solution? Many thanks for your help. Regards, Stanislav
You want "something different" but this "something different" is quite hard to define.
I want a result which reflects the result on the camera. Have the feeling the display
of the D800 is not the greatest, at least (not only the color issue which is often discussed)
but also the exposure. Often I think I would need to compensate it, but then afterwards
on the computer the non corrected version looks most of the time better.
I think its interesting to see how allergic people react when the word jpeg comes up.
This is also just a rendered result, just by the camera. There are many options in my cam.
I like the vivid setting with some modifications. And that gives me a result I like.
And if I like the result, why shall I spend way more time to replicate it?
I do not talk about that I would want the jpeg, I only say that what I get color wise out of the
box is how I would like to look at it. I still want the capability to fix for example exposure in image,
but I want the base the version I got from the jpeg view (or how the Nikon raw software could do).
On Lightroom I did not manage to have a profile that looked as appealing to me.
It also consumes way more time in my workflow to fix all pictures manually and results might differ.
To work on an image you need a starting point, I do not say the jpeg look is always perfect and
what I want all the time, but most of the time it is.
You say yourself you use profiles. So why should there not be a profile which automatically adjusts to the camera settings.
Its so frustrating to see a look which you like (the preview image when the pic is first accessed) and
then Lightroom switches to its own rendering which is flat and which I do not like.
For me its clearly something Adobe and/or Nikon should fix, like the mentioned "auto correct to preview look",
Nikon profiles/settings/raw-details in Lightroom or for example a Nikon import module. -
Looking for answers on XMP files - where should they be stored as sidecar files? With the original raw file or in a separate folder?
Relatively new user of Adobe LR5 and PS CC, about a year old.
If they should be stored somewhere beside the folder that contains the originals, where and how to change the settings?
If I choose to write metadata to the original files, is that sidecar files or does the XMP file show separately?
To be honest, I usually find a video and I cannot figure this out. I have never received an answer on any of my questions by the way.Hi there,
You answered a prior question from me so I wanted to reach out to you about this. I just need a step by step on how, if possible, to View LRCC on my MacBookPro when the main interface is on my iMac -
Camera Raw 4.4.1 has bug with Canon 40D raw files
I shoot with the Canon 20D, 30D, 40D, 1DMII, and the Rebel XTI. The Raw processor is showing an anomaly only with the 40D files. When I load raw images, and when the image is displayed, it is shown at one setting. Then in 3 seconds, its updated again at about 1/2 stop brighter. Each time I click on another image on the left column, same thing. The new image is displayed, then 3 seconds later, updated at about 1/2 stop brighter. THe histogram reflects the changes showing the data moving to the right. This only happens with the 40D raw files.
Whats up?
It happens regardless if "Auto" or "Default" is selected. I use "default" as a norm, never letting PS do an auto correction.
How do I stop Camera Raw from doing the second update? This has to stop.
...DougThanks John,
Now moved to ACR -
http://www.adobeforums.com/webx/.3bb6a85c.59b53a49 -
IPhoto compatibility with Nikon Compressed RAW files?
Hi,
Has anyone tried using iPhoto with the compressed RAW files generated by a Nikon D300s? Are they supported?
The 300s can create types of RAW files: 12- vs 14-bit and uncompressed vs lossless compressed. Which of these 4 types is/are supported by iPhoto?
Thanks,
MikeHi,
I looked into it a bit further, and apparently Apple does not support ANY TYPE of RAW file from the D300s! This is the camera that Nikon (who is not exactly a minor player in the digital camera market) describes as their "flagship" DSLR!
(Even more frustratingly, the D300s has the same sensor and image processor as the currently-supported D300, so the RAW file formats should be very similar and Apple shouldn't have to do too much work to add D300s support!)
On the other hand, Photoshop already supports it:
http://www.adobe.com/products/photoshop/cameraraw.html
EDIT: yes I know I should "submit feedback"... already done...
-Mike
Message was edited by: Mike G. -
Big Colour and detail changes between Original Nikon RAW files and the images created on the Preview page! Yes there are distinct visual changes when I preview my Nikon NEF RAW Files.Please note I do not use iPhoto at all.
If you view it as a contact sheet straight from the original folder there are no alterations but the moment you double click and want to 'Preview' it, this new preview page introduces very noticeable distortions : lighter shading goes missing and colour goes darker e.g orange turns red and mid blue goes deep blue! Alarmingly the little column on the left of the preview page showing the collection shows the original file colours and then after a few seconds show the new distorted image...you can see this visible change and it takes place after a few seconds once you double click! Also if you use Apple's 'Cover Flow' to preview, this function will replace your original RAW file with the new 'altered preview' image!
I have raised this with Apple but they have yet to reply...has anyone ever experienced this? I have used my Mac book for 18months only noticed it about 5 days ago!
I went to Apple store and we tried it in other laptops and Macs and it happened to all of them so we think this is a software issue and not down to the laptop.
Any help is much appreciated!Big Colour and detail changes between Original Nikon RAW files and the images created on the Preview page! Yes there are distinct visual changes when I preview my Nikon NEF RAW Files.Please note I do not use iPhoto at all.
If you view it as a contact sheet straight from the original folder there are no alterations but the moment you double click and want to 'Preview' it, this new preview page introduces very noticeable distortions : lighter shading goes missing and colour goes darker e.g orange turns red and mid blue goes deep blue! Alarmingly the little column on the left of the preview page showing the collection shows the original file colours and then after a few seconds show the new distorted image...you can see this visible change and it takes place after a few seconds once you double click! Also if you use Apple's 'Cover Flow' to preview, this function will replace your original RAW file with the new 'altered preview' image!
I have raised this with Apple but they have yet to reply...has anyone ever experienced this? I have used my Mac book for 18months only noticed it about 5 days ago!
I went to Apple store and we tried it in other laptops and Macs and it happened to all of them so we think this is a software issue and not down to the laptop.
Any help is much appreciated! -
OS X 10.7 (Lion) iPhoto incompatible with Canon G16 RAW files
Can anyone help me with this issue? I recently decided to shoot RAW on my Canon cameras EOS 40D & Power Shot G16. No issues in importing EOS 40D RAW files, but not the same with the G16 RAW files. After the importing phase is finished I would receive an error message indicating that *.CR2 (G16 RAW) is not supported. I checked the support threads and it shows that G16 should be supported. Any suggestions? Thanks in Advance.
Here is the download link for the RAW update:
Digital Camera RAW Compatibility 5.01
The bad news is that the system requirements state Mountain lion or later is required. -
when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?
Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos. -
How to Delete imported JPEGS after matching RAW files are imported as masters
Using a 5D Mark III and shoot JPEG (SD) and RAW (CF).
Aperture 3.5.1, using a managed library
Perviously, using a 7D so new to shooting JPEG and RAWs from an aperture Aperture workflow standpoint.
I know that i can import the JPEGs > delete images that do not make the cut > then import the matching RAW files in the import dialogue that correspond to the JPEGs in the Aperture Library.
I use the RAW files as my Camera Master images and once the RAW files are imported, the smaller resolution JPEGs are no longer needed or viewed in my normal edit workflow. I only need the JPEGs to quickly go through the images to find out which RAW files i need to import at a later time to increase the speed of import > edit > deliver.
My Assumptions:
1. Logic would lead me to believe that after import the user should see a stack like image representation with whatever file type is considered Master to be on top and the viewable secondary file type on the bottom. clicking on the image stack should allow you to see both file types as you would normally see with image stacks with the same files types. This is not the case... What am i missing here?
2. Logic again would lead me to believe that when i have the ability to delete one of the 2 image types as i do not need both in the end. After the import process is complete and RAWs are backed up, I want to delete the JPEG files as they are just taking up more space on my DAS drive array... There is no need to keep a duplicate of every file in both JPEG and RAW format. This is not the case as when i delete the JPEG or RAW, both files formats are deleted simultaneously. What am i missing here?
Problems: (correspond to Assumptions above)
1. I do not seem to have access to both images (JPEG & RAW) in a stack where i can expand and close the stack to see both? It seems like i only have access to the image type i have selected as Master? This seems counter intuitive to what the workflow should be as why would aperture 'lock the secondary file types away' so you can't easily view both file types as the same time for comparison?
2a. Reality seems to be that i do not have access to the JPEG and RAW image files. I can only see one at a time by selecting the images and choosing 'make JPEG master’ and then respectively... 'make RAW master', but you can't see both at the same time for file comparison.
2b. Also, I can't find a way to delete the JPEG images after the RAW files have been imported. I would presume most professional photographers shoot RAW and do not shoot JPEG as their camera master or editing master images. I do not understand why aperture has captured both as a pair in the library that does not allow me to delete the JPEG (in this case) as i have selected the RAW as my master.
If someone can please help... The function seems like either i am missing something obvious or that the implemented function of using RAW + JPEGs files for import is broken from a real world workflow standpoint.leonie...
thank you for clearing that up for me.
I think that at this point it is silly to use the JPEG+RAW import functionality as it seems that it takes longer to do the above steps than to just import only the RAW files and press on from there.
I seems what i have done in the past of only importing the RAW files and then using the quick preview functionality to reduce image load times is the best thing in can come up with without keeping 'duplicates' in the database.
That really baffels me that there is no built in functionality to remove the JPEG from a RAW+JPEG pair and i wonder how the real world photographers who help Apple test and implement software to solve real world workflow problems thought the JPEG+RAW import was going to be used.
I do understand that i can use a smaller JPEG file size to reduce the bloat of the database, but used over hundreds of thousands of images is certainly going to make a dent in my total aperture database size and therefore storage needs down the road.
If you have any other workflow thoughts, or know of a 3rd party plugin/ etc... to fix this obvious shortcoming then i am all ears..
thank you again Leonie and have a great week -
Lightroom 4 corrupting Nikon D800 RAW files on import
Has anyone experienced Lightroom 4 corrupting Nikon D800 RAW files on import?
How do you know they aren’t corrupted before you import, or the old one wasn’t already corrupted and you just regenerated the preview and could then see the corruption where what you saw, before was from the preview cache and not the current image?
Is the corruption a problem with the Previews or does LR actually choke on the file and say it is unreadable or show you a gray thumbnail or pixilation starts halfway down the photo.
Can you prove the files were intact coming off the card and only are corrupted after importing into LR? Can you get to the originals on the card, still? -
CS3: HDR Merge Problem with Canon 50d RAW files
I recently upgraded from a 20D to a 50D. I'm running CS3 under WinXPpro with 3GB of RAM. HDR merge of 3 CR2 files is causing CS3 to generate a program error and crash. This never happened with my older (smaller) files from the 20D. Anybody know how to fix this?
TIA,The suggestion was to try an HDR with smaller 50D sRAWs as an *experiment* to see if the size matters more than the camera model. Another benefit of a 50D would be the 14-bits per pixel instead of 12-bits and an sRAW would have less noise per pixel than a full-size RAW so using smaller sRAW images might work better than a 20D's.
The "size" being referred to is the dimensions in pixels, not the on-disk size, becasue the in-memory size of an image should be similar whether it comes from a 16-bit TIFF or an 16-bit RAW conversion.
Merging RAWs will involve ACR during the HDR process, whereas merging TIFFs won't unless you have the setting to prefer ACR for TIFFs, too, which you don't indicate.
There can be data in the highlights and especially shadows from a RAW that gets thrown away when it's converted to TIFF, so merging RAWs is better than merging from TIFFs.
I currently have CS4 only on my machine so I forget, but with CS3, does it matter what output size you have set in ACR, when you do an HDR conversion from RAW? In other words, does HDR using ACR ignore the output size or not? If not, then perhaps setting a smaller size in ACR (the same area where you set the bit depth and conversion colorspace) would make things work or setting a larger size with 20D images would make them fail. This is being suggested as a experiment as well, to try to isolate the issue, not necessarily a permanent solution.
I don't think there is anything inherently wrong with a 50D RAW that would make it not work, but the larger size would use more memory and maybe your machine is getting close to some sort of limit.
Other suggestions would be to reset your preferences and check your disk(s) with scandisk and/or change your scratch-disk to somewhere else to make sure there's no some corruption keeping the HDR process from working with the larger 50D images, and along those lines, also try purging your ACR cache or moving it to another drive. You might also try changing the amount of memory available to Photoshop (ram vs scratch-disk) in the Preferences.
What module does the crash occur in, if the error says? Is it related to display or something else? -
Problem with Canon G12 RAW file
I'm very disappointed because I can't use Lightroom with my new camera! I have this issue since LR 3.3. and CR 6.3 started to support Canon G12's raw file. Any raw file is decoded incorrectly, picture is grained, it has a lot of noise at any ISO (even 80 or 100). The defect is noticeable only at 100% zoom, not at 50% or other sizes.
I tried to do also a clean installation of LR 3.4.1 and CR 6.4.1 but the problem persists. (I use LR 64 bit on Windows 7 64 bit; with PS 12.1 64 bit I have the same problem)
Yes, the camera is ok, and with Canon Digital Photo Professional 3.10 all is perfect, the same picture is amazing.
Is there any solution please?
Thank you!
DavideIt may be that DPP knows how much default noise reduction to apply to your G12's raw images and Lightroom doesn't.
Can you adjust LR's noise reduction sliders to get a better image? If so, you could make that amount of reduction a default.
If that doesn't work for you, could you post a sample raw image somewhere that we could bring it into Lightroom and see what you are writing about?
Hal -
Help with Canon G9 RAW file in CS2
I have CS2, and I recently purchased a Canon G9. I noticed that there is an update for Camera RAW that listed the G9 in it. But the update for CS2 doesn't. Can someone point me to how I can read G9 RAW file in CS2?
Thanks.Use the most recent DNG Converter (version 4.3.1 part of the Camera Raw 4.3.1 download) and convert the G9 files to DNG. Course, with this nice new camera, it would be a real shame to be stuck on Camera Raw 3.x cause Camera Raw 4.x (and Photoshop CS3) is a powerful and worthwhile update.
Maybe you are looking for
-
How can I display my bookmarks in a persistent column on the left of the display?
I like to have a permanent display of bookmarks i a column on the left of the display. Having restarted FF, this is no longer shown. I see a View option to display the bookmarks toolbar - but I don't want a toolbar - I want to go back to having the l
-
I got a new AppleID for my wife today: [email protected] When I wanted to get her a [email protected] e-mail it didn't let me. Somehow my wife's e-mail [email protected] got associated with my AppleID [email protected] and now I don't seem to be able
-
How can I pass in continuous value from labview to teststand?
Hello I want to run a vi using teststand. I want this vi to send values to teststand. My problem is that the value is only updated at the end of the vi execution and I want to get the value before the end of the vi execution. If somebody can help me
-
Count number of rows from oracle and sql database and generate a report
Hi All, Can someone help me in writing a java program for the following scenario? 1. Read the number of rows available from oracle table and print the total row count in a Report.txt text file. 2. Read the number of rows inserted in a sql database (a
-
With out source system creation we have transported all the flow
Hi all, With out source system creation in Quality we have transported all the data flow now is there any option to map the source system to transported flow. Regards Kiran Kumar