WBS Dates not updated from confirmed activities below

Dear All,
Require your help on this.
I have a Project Definition where we have Multiple WBS (upto level 2) and we are using single network.
Activities are distributed in various WBS levels (Lowest WBS).
For example I have WBS where there are three activities, and two activities have status CNF, and one activity has status PCNF (Partially confirmed)
When I re-schedule the project the Early start date of the Partially confirmed activity is getting transferred.
Ideally the Early start / Actual start of the CNF activity should be transferred to the WBS level.
Due to this when I "determine actual dates" @ WBS level, it gets over written after scheduling.
For WBS I Re-schedule using Top Down ; Forward in time ; WBS determines dates
For Network I Re-schedule using Strict bottom up ; Backward in Time ; Network Determines Dates
I have ticked Adjust Basic dates & Start in PAst 999 ; but still the Actual start dates of confirmed activities are not transferred.
Please help me

Hi,
I tried the network scheduling, by check marking on the "shift order" flag, but there is no change in the result.
But If I uncheck the "Adjust Basic Dates", then I get the required result, but I am not sure whether it is the correct way. Please give your views on this.
Also I need to check the results & CNE5 report, in case of delayed confirmation (normal duration is 5 days & Actual duration based on confirmation is 10 days),. I think in this case I may need to adjust the basic dates also while rescheduling.
Regards,
MAK

Similar Messages

Data not updating from psa into Data Targets

Hiii,
We have started data upload in info cubes from psa . The number of records was 4 in psa . But after waiting for at least 3 hours ,still the data is not updated in info cube . The data which we want to upload in info cube (of stock) is of past date which due to some reason failed to update in BI from ECC . To upload the same that is data of past date we have deleted the setup table in ECC and then after filling the data again in set up tables, created a new info package from which uploaded data in PSA . But while trying to upload data in info cubes,it is not getting updated and the request status is showing still green yellow in psa.
Please suggest how to resolve this issue.
Thanks and regards

Are you loading material movements from 2LIS_03_BF in to cube? If so, please look at the below link for inventory data loads.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Regards,
JB

WBS dates not update in report

Dear All
I have created Project through Sales Order. Delivery date in sales order is end date of project
All activities are link (established relationship) one network and assigned to WBSEs in project.
I have also mentioned the normal duration for each activity in network.
I am doing scheduling of these activities with following specific requirements -
1) Backward scheduling is to be done...start date for network can be either today's date or it can also be in the past...end date for completion of network is fix.
2) Scheduling is to be done on entire project, the dates should be determined by the system for activities and should be transfered to the respective WBS elements (i.e. network determined dates)
I have maintained following config settings -
Scheduling Parameters -
Adjust date - 2 (do not adjust)
Scheduling type - 2 (Backward)
Automatic scheduling - Ticked
Reduction strategies - All opern in the order
Parameters of Scheduling -
Backward, network det date, adjust basic dates (tick), Automatic scheduling (Tick)
when I run scheduling for entire project its gives result properly but in report CNS41 my dates for ErlStrt(B) F and LtStrt (B) for WBS seen ##.##.#### .
Do I need to change anything in the config???
Regards

Hi Ahemad
The issue was same with all reports. The date was display properly in WBS under dates tab or even I able to view report from CJ20N through Project Planning board (gantt chart) by selection of dates field. I only get problem under to column ie ErlStrt(B) and LtStrt (B) where dates was reflected ##.##.#### only for WBS but activities under same WBS dates shown properly.
Regards

Actual dates from confirmed activities are not rolled up to wbs

Hi
In my Business Scenario, I need Project Definition, WBS, and Network
header to derive dates from activities assigned to them. I indicate the
Project definition start date and rest of the schedule need to happen
which is achieved through config i have done
I have created a project with two WBS and one network attached to
project definition. 4 activities of the network are attached to these
WBS
When I have done the scheduling, the basic dates are properly
calculated for Project Definition, network header and WBS
Now I have released the project and started confirming the activities.
After complete conformation of 1st activity, i have schedule the
project to see the dates. Now the dates of Project Definition, network
header and WBS are derived by the activities which are not confirmed.
Ideally the basic dates of Project Definition, network header and WBS
are to be derived from activities confirmed and yet to be confirmed the
way the basic dates are derived before confirmation.
As a result of this the basic dates are showing wrong dates which are
derived from unconfirmed activities
Warm regards,
Ramakrishna

Hi,
This is standard system behaviour.
Basic dates at WBS level do not change based on activity confirmation. However, actual dates at WBS level get updated from network activities based on confirmation.
"Tentative actual start date for WBS element" and "Tentative actual finish date" get updated from activity confirmation in the case of WBS with activities assigned to it.
This tentative dates can later be transferred as actual dates.
Basic dates do not get automatically updated based on confirmation of activities
Muraleedharan.R
091 9880028904
[email protected]

After I sync with iTunes my iPad Calendar is not updated from my computer where I keep my dates on Abacus. It used to do this. What's wrong?

After I snync with iTunes my iPad Calendar is not updated from my computer where I keep my dates in Abacus. It used to do this.

Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Lync 2013 Photos will not update from AD

I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs; Replicate this attribute to the Global
Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"
and finally we are setting the photo in ad using:
"Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
but unfortunately no change on my Client. I still see these users original photos.
Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
More info on the environment:
4 main sites + remote users
~7DC's - 2003 DFL (1 at each site + a few at HQ)
3 Lync Front end servers (2013) (All located at central HQ)
2 Lync edge server (2013) (All located at central HQ)
1 - 2010 Exchange server (Located at central HQ)
2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
About 100 HP 4110 Lync Edition Desk phones
Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

OLEDB data not updating

I have several drop-down lists that I want to pull data from a MySQL database on a server. I have set up data sources to use a system DSN (using mysql-odbc 3.51?) and a SQL query. The drop-down lists are using dynamic properties for the list items. The from was created in LiveCycle Designer 8.
The form works fine in LiveCycle's preview mode. If I open the form in Reader 8, the lists are populated. However, if I change the items in the database and reopen the form in Reader, the items do not reflect the database change. Furthermore, when I opened the form in Reader on a computer without the DSN, it happily showed the original data. i.e. it seems that Reader is never trying to read from the database.
If I reopen the form in Livecycle Designer and preview the form, the changes made in the database are present. If I save the form, the changes are reflected in Reader, but further changes are not.
In summary, LiveCycle Designer seems to be updating data from the database in its preview, but Reader is only showing the data that was there when last saved in LiveCycle Designer (some sort of cacheing?) and not updating from the database.
I guess the question is obvious - how do I make the form such the Reader always gets its data from the database (and gives some error if database unavailable)?

I believe OLEDB access is only available through Acrobat, not Reader.
When you save a form in Acrobat with a value in a field, that value is saved as the default value in the form regardless of whether or not it can access the database. That's why you're seeing the data in Reader.

Status is not updated from delivery to sales order item.

Dear Folks,
One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
Thanks & Regards,
murali.

Dear Murali,
Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
I hope it will help you,
Regards,
Murali.

HT201210 My ipod touch 2 gen will not update from IOS 4.2.1

My Ipod 2Gen will not update from IOS 4.2.1 keeps saying this is the most up to date software. Does the 2 Gen Ipod not allow anything higher than 4.2.1. HELP PLEASE!!!!

iOS 4.2.1 is the highest supported iOS version for the iPod Touch 2nd Generation.

FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB

Hi,
My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
I need assistance to get everything working again, and I think it might take a while to get everything resolved.
I don't know what information to provide so here is some to start with:
I believe this is a on server topology:
1. There is the management server, with all the roles except the "distribution" role installed.
2. The updates to FCS are set to go through our WSUS server.
3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
5. I have domain admin credentials
6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working again

Thanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
The only error that really stands out is this one under the application logs:
Source: Microsoft Operations Manager
Event ID: 20607
The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
IDispatch error #3222)
I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though)

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing

IPad 2 will not update from version 4.3.5 (8L1).

I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

Naalamc wrote:
It's an ASUS, Windows 8, Version 11.1.3.8
Thank you.
Your iPad has iOS 4... See Here > http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

My contacts are not updating from the iCloud. How can I actively go and retrieve them?

My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

Hello there, Lk354.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
Get help using iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

CC Photoshop not updating from 14.0 to 14.2.1

Hi All,
I'm having an issue where my CC Photoshop will not update from version 14.0 to 14.2.1. I've signed out, uninstalled the Creative Cloud desktop app and re-installed it, but the issue persists. I also uninstalled and re-installed CC Photoshop and it still downloaded and installed the other version. Can anyone help point me in the right direction with what to do next?
Thanks!; trouble

Moving this discussion to the Creative Cloud Download & Install forum.
Rocketscience I would recommend reviewing the installation log for the update to determine why it is failing. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

WBS Dates not updated from confirmed activities below

Similar Messages

Maybe you are looking for