WCCP Creates additional tunnel interfaces

Hi,
I'm having 2911 routers with Cisco WAAS module installed. While configuring the WCCP on the 2911 router, I see additional interface tunnels gets automatically created once I issue ip wccp 61 and ip wccp 62.
It gives these tunnel ip address from 172.16.0.0 block.
for that these tunnels are required ??

The tunnels are created automatically to process outgoing GRE encapsulated traffic for WCCP. They appear when a WCCP client connects and requests GRE redirection. There is one tunnel created per service group that is using GRE redirection, plus one additional tunnel to provide an IP address to allow the other tunnel group interfaces to be unnumbered but still enabled for IPv4.
Regards,
Zach

Similar Messages

How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

Scenario Details:
Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
The file logic for some the fields is as below:
No of records
InvNumber
InvDate
CusNumber
LineitemDesc
Tax1Type
Tax1%
for 1st E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
Hardcode when E1EDP04/MSKWZ=O2 or O4
Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
for 2nd E1EDP01
E1EDK01-BELNR
E1EDK01-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
for 3rd E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
same as above
same as above
same as above
Hardcode "REIM for USE TAX"
Hardcode ""
Hardcode ""
Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
How we can create the additional lineitem?
Currently we are using E1EDP01 to do context handling.
The target structure is :
MT_FILE
     INVOICE     0..unbounded
          InvNumber     0..1
          InvDate          0..1
          CusNumber     0..1
          LineitemDesc     0..1
          Tax1Type          0..1
          Tax1%               0..1

Hello,
Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
This will then create an additional field which is your requirement.
The above is one way.
But if you want to have the same target field name as ADP_File appended for tax field being '03'.
Then in that case you can you two message mapping for one common operational mapping / interface.
In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
This will then create the same structure as required.
Note : Please change the occurence of ADP_File to 0..unbounded.
Regards,
Souvik

DLSW and Tunnel Interfaces problem

We have a pair of routers with tunnel interfaces and DLSW between them.
Some times the tunnel interface goes down thus loosing service trough DLSW.
Is there any problem reported between DLSW and this kind of tunel interfaces ?

Hi,
i assume you are using dlsw tcp peers.
In general dlsw does not know over what infrastucture the connection really runs. Dlsw gives data to tcp and tcp is responsible for doing the actual transmission.
I dont know of any problems with dlsw and tunnel interfaces in general.
Some more information might help to understand the problem.
What type of tunnel are you using? GRE?
What version of ios are you running?
Do you use additional encapsulation overhead like ipsec ect?
Does tcp on this router use path mtu discovery?
thanks...
Matthias

Where did these tunnel interfaces come from?!?

Hello,
just wondering why one of our routers creates tunnel interfaces dynamically.
I was setting up a GRE tunnel to transport multicast traffic over network. After I was done, I found two extra tunnel interfaces with command show ip interfaces brief and those extra interfaces uses my original tunnel interface as their IP addresses. There is no any configuration regarding to these extra interfaces in running config. How did this happen? Any explanations? Is it relating somehow to my multicast solution?
If I got two dynamically created tunnels does that mean that I have at least two concurrent multicast groups on my router in active state?
Sorry for dummy questions but I have almost zero experience what comes for multicast and last time I studied it in school about 8 year ago...
-JJ

Hi,
These are created dynamically, one to encapsulate multicast packets and the other one to decapsulate. You can see them with the command < show ip pim tunnel > . You can find the description and purpose of these tunnels here:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti/command/imc-cr-book/imc_s1.html#wp9533023710
Hope this helps,
Jose.

Mystery Tunnel Interfaces on 2921 Router

Hi All,
I need some help.
For some reason it seems we have 3 Tunnel interfaces on the router, not sure how it got there but we are unable to delete them or configure them.
They seem to take the loopback ip as source and if I delete the loopback interface it chooses another IP.
Output from sh ip int brief, not sure where it gets those IP's from as well.
Tunnel0                    172.16.0.1      YES unset up                    up
Tunnel1                    172.16.0.1      YES unset up                    up
Tunnel2                    172.16.0.1      YES unset up                    up
See below when I try to enter interface config mode:
Router1(config)#int tunnel 0
% This interface cannot be modified
Any suggestions or help will be appreciated.
Regards
Z

Hi Zubair,
this is due to WCCP. You have WCCP for service 61 and 62 so my guess is you have an optimizer appliance (like WAAS) talking WCCP with this router. The tunnel interfaces are the result of WCCP using GRE encapsulation to redirect the traffic to the WAN optimizers.
you can find more info here:
https://supportforums.cisco.com/docs/DOC-15782
thanks,
Fabrizio

DMVPN + IPSec protected VRFs; IPSec SAs established only on one tunnel interface

Hello folks!
I have a setup between two Cisco ISR routers, running IOS 15.1(4)M3. I have tried to establish DMVPN connectivity with two VRFs (ie. two tunnel interfaces per router) between the routers and it mostly seems to be working as I expected. But... IPSec SAs seem to get tied to only one of the tunnel interface, not two (one per direction) per tunnel interface as they should. There's no MPLS backbone in between the routers, only "global VRF", routed IP network.
Command "show crypto ipsec sa" or indirectly a missing OSPF neighborhood between the routers verifies the erroneuous situation. Occasionally, after an "interface tunnel[ 0 or 1] shut, no shut" or "clear crypto sa" command I seem to get it up and running, two SAs per tunnel interface, but if I reboot either one of the routers or just clear the IPSec SA, they most likely will appear under either one of two tunnel interfaces. So, what should I change to instruct the router setup SAs correctly, two SAs (one per direction) per tunnel interface?
I'll enclose appropriate parts of the configurations and output of command "show crypto ipsec sa".

I think I figured it out, for anyone who might stumble across this post in the future. It looks like you need to add the shared keyword to the tunnel protection command. ie...
interface tunnel 0
tunnel protection ipsec profile MyProfile shared
end
I should note that one of the first things I tried was to created a separate IPSec profile for each unique tunnel interface. It ended up not fixing the problem and I had to go with the solution above.

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

What is the best way to create additional storage AND backup a laptop, as well as the storage?

Beyond being seriously annoyed at an Apple Employee recommended we go the NAS route at an Apple Store no less—only to find it doesn't work for storage OR Time Machine backups of iPhoto (after spending weeks organizing/transferring date, outside of a good deal of coin)—we are now perplexed as how to set up/store based on our needs.
Goals
Create additional storage (iPhoto, iTunes, documents) for the family laptop
Accessible by anyone/device on the home network (iPad, mini iPad, iPhones, etc..)
Would prefer the ability to access this offsite as well
Backup of the laptop
Backup of the storage HD
Ensure we do not lose iPhoto libraries data/files
Here is what I am thinking—need to know if it will work.
Purchase two HDs
Plug them into my base station
Allocate one HD @2T for storage (additional iPhoto libraries, home movies, iTunes libraries, etc...)
Partition the second HD @3T to handle two Time Machine backups
(a) Time Machine of the laptop (up to 1T of backups)
(b) Time Machine of the first HD (up to 2T of backups) - Is this possible?
What I need to know is
Is it possible to partition a HD to Time Machine two backups from different sources—one being a HD?
If this is not a good solution—what is? I am pulling my hair out trying to figure out how to deal with a lot of data related to iPhoto due to the formatting limitations there.

While most do not advocate mixing Time Machine backups with other files, I have 3 Time Capsules with files and backups on the same partition and have never had a problem despite doing it for many years. All 3 Time Capsule are set up as NAS devices.
One Time Capsule holds the Snow Leopard partition backup of two computers. The other two each have a backup of the Mountain Lion partition of two computers. Time Machine is set up to alternate between the devices, which it can now do. On these 2 Time Capsules is a copy of the iTunes Library and a copy of the iPhotos Library, which provides a backup for the two. Every so often I manually copy the new files from the primary iTunes/iPhotos library to the backup on the other Time Capsule.
If the computer is on, I can access the computer from my iPad and then access the hard drives and the files.
Hopefully, I have been able to make this clear.

Can i create additional apple id's using the same email address for using multiple products with iCloud?

can i create additional apple id's using the same email address for using multiple products with iCloud?

Hi Anne,
I'm pretty sure different eMail addies are needed for different Apple IDs.

A more successful experiment in creating compositable user interfaces for Config Dialogs

A couple weeks ago I posted an experiment in creating compositable user interfaces using transparent subpanels. The approach might best be described as, "It at least was notable for being novel."
Today, I'm posting another attempt, this one along more traditional lines, and far more successful. Particularly notable: this one can do all the arbitrary composition of the last one AND it solves the TAB order problem.
This solution uses a picture control and renders N copies of a control. When the user tabs to a control or moves the mouse over the control, a real control slides into that position to be able to catch the events (update mouse over draw state, highlight for keyboard focus, handle typing, etc). When the Value Change occurs, a master array of data is updated and the picture control is updated.
This is something that has been attempted in various forms in the past, but there are two aspects of this particular implementation that make it nice:
its programmatic interface for specifying the behavior of the various objects should make it fairly easy for a user of the framework to programmatically generate their dialogs
it handles the TAB problem without flickering, something I haven't seen in other attemps
This idea spawns out of conversation about the previous experiment -- thanks to those of you who posted on various forums, e-mailed me, or, in a couple cases, showed up at my desk. That last one is not something I'm encouraging unless you work at NI... just saying. :-)
Now, this experiement has already yeilded some interesting conversation. We note that as long as controls are instantiated independent of each other -- that is, no property of one control depends upon the property of another control -- this dialog system scales nicely. But in this experiment, I implemented Radio Buttons, which interact with each other -- when one is set True, the others go False. As soon as controls start interacting with each other (such as graying out one control when a checkbox is toggled, or having expandable sections, or really complex cases like updating a graph as some options change, like happens in some Express VI config dialogs) then we start needing ways to refer to the other controls. This rapidly moves us in one of two directions: naming controls or creating references. The naming approach is definitely my preference as it fits better with dataflow and I can do some interesting effects with breaking apart some of the tree. But all of this quickly starts sounding like "Please implement a XAML parser in LabVIEW." For those of you unfamiliar with XAML, in the world of UI design, it might very well be the coolest thing since sliced bread. A XAML string would indeed fit with dataflow, and we could start building that up. I hesitate to head down this road for two reasons. One, as many have noted, there's really not a good XML parsing library written in LabVIEW that can give me a useful DOM tree. Two, that's a huge project and my gut sense is that you'd have to complete a fairly large chunk of it before you'd start seeing any return on investment. But it is worth thinking about -- I might be wrong. Wouldn't be the first time. This code that I've posted today can at least get you started on the generation side if one of you decides to become industrious.
I'm turning my attention away from this project for now... coding in G is lots of fun, and I wish I could spend more days doing it, but this has been a side project and it's time to get back to my assigned projects in text programming. Building a powerful platform for automatic UI generation in LabVIEW would be really useful -- I see lots of requests for this sort of thing, and other languages are pulling ahead of us in this domain.
[UPDATE 5/17/2012 - There is an improved version.]
Solved!
Go to Solution.
Attachments:
ConfighThroughCtrlCreation.zip ‏558 KB

Elijah K wrote:
Thanks for posting this Aristos. I would normally be one of those to go bug you at your desk, but in case I'm not the only one with this question... which particular flickering problem are you referring to? The act of switching tabs? In all honesty, I've never noticed...
When you move controls around on the screen, normally you try to Defer Panel Updates while you do that. But Defer Panel Updates has an effect on control's abilities to catch certain mouse clicks, so when you're trying to move a control to catch the mouse, you have to work a lot without Defer Panel Updates, so if you're adjusting captions, etc, to match the new location, you can see flicker as properties adjust. You can move the control off-screen, as long as you have already updated the picture control to reflect the changes. It took a while to catch all the ways that the flickering can crop up. I think I got 'em all.
Attached are the VIs saved for LV 2009. Actually, they're saved for LV 8.6, but it doesn't work in 8.6 because of a bug in the picture control that existed back then.
Attachments:
ComposableUI_LV2009.zip ‏391 KB

How to create a login interface in labview PDA module?

How to create a login interface in labview PDA module? So that it checks with a list of usernames and passwords and allow to go to another VI?
Anu

Anu,
I've attached a really short example that does something like what you're talking about. It just compares the user's username and password a pre-determined username and password and then "logs the user in" based on that comparison. Like Greycat said, you probably want to store this username and password info in some sort of file on the PDA that's in an encrypted format for both security and flexibility of your application.
I hope this helps,
Justin D.
Applications Engineer
National Instruments
Attachments:
LoginVI.vi ‏17 KB

Looking for a better solution that tunnel interface

Hi
acctualy I have a Vsat connection between my remote site and central office
on both site we have router and sat modem
I have now a tunnel interface between my two routers,I am looking for a better idea,,

hi...
so you have tunnel interface between your two router so now what are you looking for...?
secure IPsec connection or what???
please explaine in details
regards
Devang

Formula that creates additional rows

Greetings everyone. I am fairly new to Apple numbers. I have a spreadsheet that calculates an investment return for clients year by year based on their age. I need the spreadsheet to go out to the clients age 100. There is an input page that I put in the clients age as well as additional information that it uses to calculate the investment return. It then takes the clients age and starts off the first column (client age) with that value. Each row has about 5 columns with different information being displayed. I am looking for a way for numbers to take the clients age column and automatically continue to create additional rows until it gets to the clients age 100. I would want each additional row to have the same formatting, formulas, and color scheme as the row before it. Is their a formula that would do this or do I need to create some sort of script?
Thank you,
Matt S.

You can put the last row (the totals) in a footer and it will always be there or it can be a regular row that is TRUE so it is not hidden.
If you make the table 125 years in length and automatically hide the unnecessary rows as I have outlined, you won't have to add rows, subtract rows, or tailor it in any other way for each client. It will tailor itself to the correct length based on the age you specify on the client's input page. And next year, when they are a year older, you can change their age in the client input page and the table will change accordingly.
Depending on how you handle the formulas within the spreadsheet, you can sum things up the normal way with the SUM function or you can sum them up with SUMIF where the "if" is "if the row is TRUE". In other words, if every row that is FALSE has zeros, you can use SUM; if the rows that are FALSE have nonsensical numbers, you could use SUMIF. Formulas for things like rate of return might take some finessing but they too can be done. Any charts you might have can be made to not show hidden data (it's a checkbox), so they too are not a problem.
I guess I'm from the school of "if it can be done within Numbers, then do it within Numbers" versus throwing scripts into the mix. It will be more versatile and portable if it does not require a script because a script is a separate entity, not part of the spreadsheet. Also, if you make changes to the spreadsheet, you may have to make corresponding changes to the script. That's just my opinion. It's your call. I'm sure Yvan can set you up with a terrific script.

When i use function module to create additive costs using KKPI_BDC_ADD_ON_C

Hi,
When i use function module KKPI_BDC_ADD_ON_COSTS_CREATE to create additive costs it shows an error. The error is 'THE OBJECT IS LOCKED BY THE USER SARKARD' the transaction it uses is CK74 for creating.
I have also read about KKP4_ADD_ON_COSTS_CREATE. But i dont know the usage of it..
I think it will be helpful if u can clarify with first FM.
Kindly suggest.
Thank you.
Harsha

Hi Harsha,
I have a similar requirement, but the issue that I am facing is that I can not find any parameter in the FM - KKPI_BDC_ADD_ON_COSTS_CREATE for Valuation Date which is a mandatory field in CK74. How did you overcome that issue, can you please share ?

How can I create additional photo library on iPad

Can I create additional photo albums on my new iPad without affecting current photos in the photo app?

This is from the iOS 5.1 iPad album. I'm sure the same is true for iOS 6:
Organizing photos and videos
You can create, rename, and delete albums on iPad to help you organize your photos and videos.
Create an album: When viewing albums, tap Edit, then tap Add. Select photos to add to the new album, then tap Done.
Note: Albums created on iPad aren’t synced back to your computer.
Rename an album Rearrange albums Delete an album
Tap Edit, then select an album.
Tap Edit, then drag up or down. Tap Edit, then tap .
Bottom line: You can certainly create a new album without affecting existing photos.

WCCP Creates additional tunnel interfaces

Similar Messages

Maybe you are looking for