WCCP flows during Lead WAE Failure

We are actually planning a large scale WAAS solution. We found many descriptions how the WCCP flows is protected in redundant design against a WAE failure. We learnt that the Lead WAE is necessary to redirect the WCCP flow to the remaining WAEs. Our question is what will happen when the Lead WAE fails. How will the WAE farm recover the WCCP flows.

Hi Peter,
The lead WAE is responsible for instructing all of the WCCP-enabled routers/switches how traffic should be distributed across the cluster of WAE devices. It does this by communictaing an assignment table of buckets/masks. The lead WAE does not actually handle the flows, they are redirected directly from the router/switch to the target WAE.
In the event that the lead WAE fails, another WAE in the service group takes over the lead role and updates the assignment for all of the routers/switches.
Regards,
Zach

Similar Messages

ODI11g Integration Step: Insert flow into I$ Table failure: TNS: error

The project/interfaces have been working successfully for quite sometime. After a server reboot, they are all failing on the Integration step
Insert flow into I$ Table failure with:
ODI-1228: Task xxxxx(Integration) fails on the target ORACLE connection xxxxxx.
Caused By: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
I have verified the topology and the dblink/Data Server is what resides in the tnsnames.ora file (which also has not changed).
Any ideas what else to look at, all topology connection tests are successful.
Thank you.

All connections were testing successfull. The problem ended up being with one of the database links, after the server reboot there were multiple tnsnames and the environment was not pointing to the correct one. After removing all tnsnames except for the correct, the problem was fixed.
Thank you for your response.

Stop document flow from Lead to Activities

Hi gurus,
Got a very simple question. I have created a bunch of custom activities. Now all of them should be accessible to Opportunity but only some of them should be accessible from the Lead.
At this point all these activities are available (document data flows from Lead to all Activties) to the Lead. When a user creats a Lead and tries to create a follow-up activity from here, he should not view certain Acitvities (only the Opportunity should be able to access them). I haven't done anything (copy control etc) specific for this to happen, hence I do not know how to stop this happening
Thanks,
-PR

In SAP Standard you can always create any type of activity as a follow-up transaction from any transaction. The copy control customizing only is valid for non-activities. So if you want to exclude some activities from being created as a follow-up transaction in certain szenarios you need to modify the standard I am afraid.
Regards, Kai

Automatic derivation of service tax (derived flow) flow during the posting of charges through FWBS in Security Module.

Hi
Case: Automatic derivation of service tax (derived flow) flow during the posting of charges through FWBS in Security Module.
I am trying to post the charges using Manual Posting FWBS but system not generating (automatically) derived flow for the service tax flow on charges.
I have done below mentioned steps for configuration:
Define the derivation procedure and Rules.
Assign the update type to the function of security account management.- Define update type fo manual posting.
Kindly advise.
Regards

Hi,
The definition of "Define Derivation Procedures and Rules" for derived flows are only taken into account during transaction management, deriving one flow type from origin flow type. This customizing does not have effect for FWBS. You may check the below customizing:
1) Transaction Manager > Securities > Master Data > Product Types > Define Company Code-Dependent Settings for the Product Type: mark the indicator "Generate taxes" in Settings for tax generation.
2) Transaction Manager > Securities > Position Management > Securities Account Management > Define Tax Rates.
Further you may consider the implementation of BAdI TPM_TAX_CALCULATION (please see note 1159408) to calculate the tax depending on your requirements. Note: the above BAdI is called only in the case the required settings are done in 'Define Tax Rates' in the Customizing.
Best regards,
Jasmine

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

SD Document flow with Leading zeros

Hi All,
We have issue with docuemnt flow, when we click document flow sales order or delivery or billing its showing leading zeros, My client don't want any leading zeros in docuemnt flow.
For example -
if i click on document flow its showing - 00500005 (SO ) 008000674 -Delivery - - Billing - 0090000012,
Can any other guide us what could be a issue with leading zeros or any config setting is missing.
Regards
Nishad

dear friend,
it depends on how do you set up the number ranges
for example, run VN01 and look how your sales orders are numbered.
regards,
p.s. create a new number range without leading zeroes and test it
but i suggest you will not change the current settings , it is 'too late' , so tell your client it is standard

Forms session got disconnected during db node failure

Hello All,
Setup: Multi node configuration
1 node appl tier - running all services except the database (2nd node will be setup soon)
2 node db tier (10g RAC)
During failover test, Invalid session error when shutdown of node where form session is connected. Is this normal
behaviour? I suppose its not, any changes need to be done? I already changed "Tools OH TWO_TASK" to use <database_name>_806_balance alias and iAS OH TWO_TASK" and "Apps JDBC Connect Alias" to use <database_name>_balance then autoconfig.
My tnsnames.ora is similar to this:
DP1_806_BALANCE=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp02-vip.xxx)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=DP1)
(INSTANCE_NAME=DP12)
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp01-vip.xxx)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=DP1)
(INSTANCE_NAME=DP11)
DP1_BALANCE=
(DESCRIPTION=
(LOAD_BALANCE=YES)
(FAILOVER=YES)
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp02-vip.xxx)(PORT=1521))
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp01-vip.xxx)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=DP1)
Appreciate your response.
Thanks a lot,
Jeffrey

Hello Hussein,
Thanks for the documents.
I already set s_tools_twotask and s_weboh_twotask with their respective values. But still form session is disconnected after failure of db node where the session is connected. Can you please help to verify if my tnsnames.ora is correct which is automatically generated by autoconfig.
My tnsnames.ora is similar to this:
DP1_806_BALANCE=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp02-vip.xxx)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=DP1)
(INSTANCE_NAME=DP12)
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp01-vip.xxx)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=DP1)
(INSTANCE_NAME=DP11)
DP1_BALANCE=
(DESCRIPTION=
(LOAD_BALANCE=YES)
(FAILOVER=YES)
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp02-vip.xxx)(PORT=1521))
(ADDRESS=(PROTOCOL=tcp)(HOST=dbp01-vip.xxx)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=DP1)
Thank you so much,
Jeffrey

Failed to restart the CSSD during the interconnect failure

Hi all,
I run a small ATP on my LAB where i have
- 2x nodes RAC 11.2.0.2 & ASM (my OCR & Voting files are stored on ASM)
- 1 public interface <> eth0
- 1 private interface <> eth1
- 1 SCAN IP defined in the /etc/hosts file (i'm not using DNS or GNS)
The test i run was to shutdown the private interface (eth1) on node 1 and i saw that
1) all cluster services and cluster daemons on node 2 were killed and node 2 was evicted from the cluster by node 1
2) all new connections were redirected to the survived node
3) Oracle OHASD daemon was restarted on node 2 and tried to start the cluster services without success because private network between cluster nodes was down
Up to here everything worked as expected but once i turn on eth1 it took ~ 9 minutes for the CSSD to startup and bring all the components up & running.
The node2 alert logs showes
[ctssd(12949)]CRS-2402:The Cluster Time Synchronization Service aborted on host node2. Details at (:ctss_css_init1:) in /u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/ctssd/octssd.log.
2011-04-13 08:09:40.978
[ohasd(5058)]CRS-2765:Resource 'ora.cssd' has failed on server 'node2'.
2011-04-13 08:09:40.985
[/u01/oracle/installed/oracle_cluster-11.2.0.2-1/bin/oraagent.bin(5764)]CRS-5011:Check of resource "+ASM" failed: details at "(:CLSN00006:)" in "/u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/agent/ohasd/oraagent_oracle/oraagent_oracle.log";
2011-04-13 08:09:41.169
[ohasd(5058)]CRS-2765:Resource 'ora.asm' has failed on server 'node2'.
2011-04-13 08:09:50.337
[cssd(13103)]CRS-1713:CSSD daemon is started in clustered mode
2011-04-13 08:10:05.833
[cssd(13103)]CRS-1707:Lease acquisition for node node2 number 2 completed
2011-04-13 08:10:07.119
[cssd(13103)]CRS-1605:CSSD voting file is online: ORCL:CRS_DISK1_2G; details in /u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/cssd/ocssd.log.
2011-04-13 08:10:07.121
[cssd(13103)]CRS-1605:CSSD voting file is online: ORCL:CRS_DISK2_2G; details in /u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/cssd/ocssd.log.
2011-04-13 08:10:07.143
[cssd(13103)]CRS-1605:CSSD voting file is online: ORCL:CRS_DISK1_2G; details in /u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/cssd/ocssd.log.
2011-04-13 08:19:49.386
[/u01/oracle/installed/oracle_cluster-11.2.0.2-1/bin/cssdagent(13091)]CRS-5818:Aborted command 'start for resource: ora.cssd 1 1' for resource 'ora.cssd'. Details at (:CRSAGF00113:) {0:6:7} in /u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/agent/ohasd/oracssdagent_root/oracssdagent_root.log.
2011-04-13 08:19:49.387
[cssd(13103)]CRS-1656:The CSS daemon is terminating due to a fatal error; Details at (:CSSSC00012:) in /u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/cssd/ocssd.log
2011-04-13 08:19:49.387
[cssd(13103)]CRS-1603:CSSD on node node2 shutdown by user.
2011-04-13 08:19:54.501
[ohasd(5058)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'node2'.
2011-04-13 08:19:57.723
[cssd(17068)]CRS-1713:CSSD daemon is started in clustered mode
2011-04-13 08:20:01.177
[ohasd(5058)]CRS-2765:Resource 'ora.diskmon' has failed on server 'node2'.
2011-04-13 08:20:13.167
[cssd(17068)]CRS-1707:Lease acquisition for node node2 number 2 completed pay attention at the timestamp 08:10:07.143 & 08:19:49.386
The error in the oracssdagent_root.log is
2011-04-13 08:09:49.286: [CLSFRAME][3014212592] New Framework state: 2
2011-04-13 08:09:49.286: [CLSFRAME][3014212592] M2M is starting...
2011-04-13 08:09:49.288: [ CRSCOMM][3014212592] Ipc: Starting send thread
2011-04-13 08:09:49.288: [ CRSCOMM][1092061504] Ipc: sendWork thread started.
2011-04-13 08:09:49.289: [ CRSCOMM][1105643840] IpcC: IPC Client thread started listening
2011-04-13 08:09:49.289: [ CRSCOMM][1105643840] IpcC: Received member number of 10
2011-04-13 08:09:49.290: [CLSFRAME][3014212592] New IPC Member:{Relative|Node:0|Process:0|Type:2}:OHASD:node2
2011-04-13 08:09:49.290: [CLSFRAME][3014212592] New process connected to us ID:{Relative|Node:0|Process:0|Type:2} Info:OHASD:node2
2011-04-13 08:09:49.291: [CLSFRAME][3014212592] Tints initialized with nodeId: 0 procId: 10
2011-04-13 08:09:49.291: [CLSFRAME][3014212592] Starting thread model named: MultiThread
2011-04-13 08:09:49.292: [CLSFRAME][3014212592] Starting thread model named: TimerSharedTM
2011-04-13 08:09:49.293: [CLSFRAME][3014212592] New Framework state: 3
2011-04-13 08:09:49.293: [    AGFW][3014212592] Agent Framework started successfully
2011-04-13 08:09:49.293: [    AGFW][1116150080] {0:10:2} Agfw engine module has enabled...
2011-04-13 08:09:49.293: [CLSFRAME][1116150080] {0:10:2} Module Enabling is complete
2011-04-13 08:09:49.293: [CLSFRAME][1116150080] {0:10:2} New Framework state: 6
2011-04-13 08:09:49.294: [CLSFRAME][3014212592] M2M is now powered by a doWork() thread.
2011-04-13 08:09:49.294: [    AGFW][1116150080] {0:10:2} Agent is started with userid: root , expected user: root
2011-04-13 08:09:49.294: [   AGENT][1116150080] {0:10:2} Static Version 11.2.0.2.0
2011-04-13 08:09:49.294: [    AGFW][1116150080] {0:10:2} Agent sending message to PE: AGENT_HANDSHAKE[Proxy] ID 20484:11
2011-04-13 08:09:49.302: [    AGFW][1116150080] {0:10:2} Agent received the message: RESTYPE_ADD[ora.cssd.type] ID 8196:12358
2011-04-13 08:09:49.302: [    AGFW][1116150080] {0:10:2} Added new restype: ora.cssd.type
2011-04-13 08:09:49.303: [    AGFW][1116150080] {0:10:2} Agent sending last reply for: RESTYPE_ADD[ora.cssd.type] ID 8196:12358
2011-04-13 08:09:49.305: [    AGFW][1116150080] {0:10:2} Agent received the message: RESOURCE_ADD[ora.cssd 1 1] ID 4356:12359
2011-04-13 08:09:49.305: [    AGFW][1116150080] {0:10:2} Added new resource: ora.cssd 1 1 to the agfw
2011-04-13 08:09:49.306: [    AGFW][1116150080] {0:10:2} Agent sending last reply for: RESOURCE_ADD[ora.cssd 1 1] ID 4356:12359
2011-04-13 08:09:49.308: [    AGFW][1116150080] {0:6:7} Agent received the message: RESOURCE_START[ora.cssd 1 1] ID 4098:12360
2011-04-13 08:09:49.308: [    AGFW][1116150080] {0:6:7} Preparing START command for: ora.cssd 1 1
2011-04-13 08:09:49.308: [    AGFW][1116150080] {0:6:7} ora.cssd 1 1 state changed from: UNKNOWN to: STARTING
2011-04-13 08:09:49.309: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_cssdstart: Start action called
2011-04-13 08:09:49.309: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_getattr: attr OMON_INITRATE, value 1000
2011-04-13 08:09:49.309: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_getattr: attr OMON_POLLRATE, value 500
2011-04-13 08:09:49.309: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_getattr: attr ORA_OPROCD_MODE, value
2011-04-13 08:09:49.310: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_getattr: attr PROCD_TIMEOUT, value 1000
2011-04-13 08:09:49.310: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_getattr: attr LOGGING_LEVEL, value 1
2011-04-13 08:09:49.310: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_cssdstart: loglevels CSSD=2,GIPCNM=2,GIPCGM=2,GIPCCM=2,CLSF=0,SKGFD=0,GPNP=1,OLR=0
2011-04-13 08:09:49.313: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_cssdstart: START action for resource /u01/oracle/installed/oracle_cluster-11.2.0.2-1/bin/ocssd: SUCCESS
2011-04-13 08:09:49.313: [ora.cssd][1114048832] {0:6:7} [start] clsncssd_waitomon: start waiting
2011-04-13 08:09:49.313: [ CSSCLNT][1098377536]clsssInitNative: Init for agent
2011-04-13 08:09:50.317: [ CSSCLNT][1098377536]clsssInitNative: Init for agent
2011-04-13 08:09:51.319: [ CSSCLNT][1098377536]clsssInitNative: Init for agent
2011-04-13 08:09:51.322: [ CSSCLNT][1098377536]clssnsqueryfatal: css is fatal = 0
2011-04-13 08:09:51.322: [ USRTHRD][1098377536] clsncssd_thrdspawn: spawn OPROCD succ
2011-04-13 08:09:51.322: [ USRTHRD][1098377536] clsncssd_thrdspawn: spawn POLLMSG succ
2011-04-13 08:09:51.323: [ USRTHRD][1099954496] clsnpollmsg_main: starting pollmsg thread
2011-04-13 08:09:51.323: [ USRTHRD][1107745088] clsnproc_main: timeout of procd cannot be 0, now we set to default 1000.
2011-04-13 08:09:51.323: [ USRTHRD][1117727040] clsnwork_main: starting worker thread
2011-04-13 08:09:51.323: [ USRTHRD][1098377536] clsncssd_thrdspawn: spawn WORKER succ
2011-04-13 08:09:51.323: [ USRTHRD][1107745088] clsnproc_main: starting oprocd
2011-04-13 08:09:51.323: [ USRTHRD][1098377536] clsncssd_thrdspawn: spawn KILL succ
2011-04-13 08:10:07.151: [ USRTHRD][1098377536] clsnomon_init: css init done, nodenum 2
2011-04-13 08:10:07.151: [ USRTHRD][1098377536] clsnomon_WaitToRegister: waiting for first reconfiguration and kgzf initialization
2011-04-13 08:19:49.385: [CLSFRAME][3014212592] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2011-04-13 08:19:49.387: [    AGFW][1111947584] {0:6:7} Created alert : (:CRSAGF00113:) : Aborting the command: start for resource: ora.cssd 1 1
2011-04-13 08:19:49.387: [ora.cssd][1111947584] {0:6:7} [start] clsncssd_cssdabort: sending shutdown abort to CSS with new ctx
2011-04-13 08:19:49.387: [ CSSCLNT][1098377536]clsssRecvMsg: wrong type request (0) on 0xc9 ret 0
2011-04-13 08:19:49.387: [ CSSCLNT][1098377536]clssnskgzfdone: RPC failed rc 1
2011-04-13 08:19:49.387: [ USRTHRD][1098377536] clsnomon_WaitToRegister: exadata initialization completed with rc=1
2011-04-13 08:19:49.387: [ USRTHRD][1098377536] clsnomon_init: problems in the CSS to allow OMON registration 2
2011-04-13 08:19:49.387: [ USRTHRD][1098377536] clsnomon_cleanup: to exit status = 2
2011-04-13 08:19:49.387: [ USRTHRD][1098377536] clsnomon_cleanup: failure, sending shutdown immediate to CSS
2011-04-13 08:19:49.387: [ USRTHRD][1098377536] CHECK action is in progress, Rejecting the check action requested by entry point for ora.cssd
2011-04-13 08:19:49.426: [    AGFW][2008402928] Starting the agent: /u01/oracle/installed/oracle_cluster-11.2.0.2-1/log/node2/agent/ohasd/oracssdagent_root/
2011-04-13 08:19:49.426: [   AGENT][2008402928] Agent framework initialized, Process Id = 17013
2011-04-13 08:19:49.426: [ USRTHRD][2008402928] to enter agent main
2011-04-13 08:19:49.426: [ USRTHRD][2008402928] clsscssd_main: New soft limit for stack size is 1572864, hard limit is 4294967295
2011-04-13 08:19:49.434: [ USRTHRD][2008402928] clsncssd_main: setting priority to 4
2011-04-13 08:19:49.434: [ USRTHRD][2008402928] *** Agent Framework Started *** Do you have any idea why it took so long to bring all the components up & running?
Thanks a lot!!
G

Hi,
there is an internal timer for the clusterware ressources regarding restarting the ressources.
In case of a node eviction or clusterstack reboot the clusterware tries to startup again.
If the issue still persists, CRS will wait for some time to start the stack again. This "restart" try is based on a timer, which is set to 600 seconds (note this is not the ORA_CHECK_TIMEOUT) but the STARTUP_TIMEOUT.
Since a missing interconnect does have some implications (not only on the network but on the whole stack) it is expected, that the cluster does not start so fast automatically (because it still has the first start running.
There is even another "issue" connected to this - Oracle will only try several times (FAILURE_COUNT/FAILURE_THRESHOLD) to restart ressources. If he cannot restart cssd/crsd for several times, OCW will not try to startup automatically, but expects the administrator to solve the error and then startup again.
But actually this does make sense:
We have to give some time for an error to be resolved, before we start automatically. It does not matter if the restart of the node is delayed by this, because
=> If the error is fixed automatically, it will normally be fixed after a cluster/node reboot and hence cluster will come up
=> If the error is not fixed automatically, but manually, it can be expected that the administrator tells clusterware the issue is resolved. He does that by simply starting the stack (crsctl start crs)
=> If the error is fixed automaticall, but fixing took a while (lets say 15 minutes), it does not really matter if clusterware needs 10 more minutes to come up.
So what you see is expected, and wanted.
It would cost way too much to monitor all ressources regarding cluster problems and trigger a startup....
Sebastian

Best practice with WCCP flows for WAAS

Hi,
I have a WAAS SRE 910 module in a 2911 router that intercepts packets from this router with WCCP.
All packets are received by external interface (gi 2/0, connected to a switch with port configured in WCCP vlan), and are sent back to the router via internal interface (gi 1/0 directly connected to the router) :
WAAS# sh interface gi 1/0
Internet Address                    : 10.0.1.1
Netmask                             : 255.255.255.0
Admin State                         : Up
Operation State                     : Running
Maximum Transfer Unit Size          : 1500
Input Errors                        : 0
Input Packets Dropped               : 0
Packets Received                    : 20631
Output Errors                       : 0
Output Packets Dropped              : 0
Load Interval                       : 30
Input Throughput                    : 239 bits/sec, 0 packets/sec
Output Throughput                   : 3270892 bits/sec, 592 packets/sec
Packets Sent                        : 110062
Auto-negotiation                    : On
Full Duplex                         : Yes
Speed                               : 1000 Mbps
WAAS# sh interface gi 2/0
Internet Address                    : 10.0.2.1
Netmask                             : 255.255.255.0
Admin State                         : Up
Operation State                     : Running
Maximum Transfer Unit Size          : 1500
Input Errors                        : 0
Input Packets Dropped               : 0
Packets Received                    : 86558
Output Errors                       : 0
Output Packets Dropped              : 0
Load Interval                       : 30
Input Throughput                    : 2519130 bits/sec, 579 packets/sec
Output Throughput                   : 3431 bits/sec, 2 packets/sec
Packets Sent                        : 1580
Auto-negotiation                    : On
Full Duplex                         : Yes
Speed                               : 100 Mbps
The default route configured in WAAS module is 0.0.0.0/0 to 10.0.1.254 (router interface).
Would it be better that packets leave WAAS module by the external interface (in place of the internal interface) ?
Is there a best practice recommended by Cisco on this ?
Thanks.
Stéphane

Hi Stephane,
We usually advise the following in such scenario with an internal module:
"ip wccp 61 redirect in" the LAN interface.
"ip wccp 61 redirect in" on the WAN one.
"ip wccp redirect exclude in" on the internal interface between the WAAS and the router.
That way, we are sure that no loops are created because of the WCCP redirection.
Regards,
Nicolas

Import Duties not flowing during GR

For the Import purchasing, i did the MIRO to capture the customs & CVD values. But while doing GR, Cess, Scess & ADC values are not flowing into MIGO. Only JMOP is flowing. I have maintained this condition types JCV1 & JADC in Excise default settings also. Is there any notes are available for this error?.
Please provide your guidance

hi,
those three duties should be expensed .only cvd and ecess ,she cess on cvd will get benifit i mean not expensed .these three a/c,s are receivable from govt.other than these three are expensed and added to material a/c .
regards
srinivas kona

No Cover Flow during music playback

I'm a newbie using iOS 3.1.3 on a 1st gen iTouch. When playing music in portrait mode, is there a way for me to lock the view in that orientation and stop iOS from switching to Cover Flow which is undesired? Is there a lock/unlock setting somewhere?

There is in ios 4. If you're still using a first gen touch with ios 3 you don't have any option to lock the orientation.

How to Test Cliams Work Flow during run time in SWDD Tcode

Hi Gurus,
I want to test my Claim Work Flow(WS99900044) in SWDD Tcode by Hard coding values to Work Flow Container Elements. How can I do this, kindly pls advice me.

I want to test my Claim Work Flow(WS99900044) in SWDD Tcode by
Hard coding values to Work Flow Container Elements
you must be aware of execute button in the same txn SWDD, being a workflow designer.......

Error during Lead Creation

Hi,
I had created a lead. When I am going to Evaluation data tab for the questionnaire i am getting the following error.
Hostname 'iwdf9077.wdf.sap.corp' unknown/cpi-c error cm_parameter_error.
please let me know how to resolve this.
Thanks

Check in OVZ1 where for your availability check, the box is checked under the tab "Blocked".
G. Lakshmipathi

Which way does information flow during a sync? From the phone to the computer or vice versa?

Does it flow both ways or only one way? If one way, which is it? How do I set it to only go from my computer to the phone and not vice versa?

It goes both ways depending on what's needed. What do you want to do?

Unexpected Call Failures during physical network failure

Our layout:
We have a private network for Mediation Server<->PSTN Gateway traffic. (This is a legacy that we are moving away from.)
We have a multi-node FE Pool. The FE Pool has redundant "corp" NICs using Windows Teaming (~failover) that serves clients and our SIP trunk, but a single NIC to the private network for the PSTN Gateway traffic.
The Mediation Seervice is listening on both "corp" and "pstn" NICs.
What happened:
The PSTN network cable for ONE of the mediation servers ("LyncFE1") was cut inadvertently.
The experience:
Approximately 5 minutes after the cable was cut, "LyncFE1" recognized all gateways were offline. (expected)
Users did not lose connectivity to the server, as the "corp" NICs were unaffected. (expected)
Inbound calls routed around the failure, as the PSTN gateways are configured to do. (expected)
Outbound calls for an indeterminate group of people would fail consistently with 503 errors and the logs clearly indicated no routes available. These users were not all hosted on LyncFE1 (per a get-csuserpoolinfo of some of the affected users).
(NOT expected)
I expected that the Mediation Service on "LyncFE1" would recognize that it had no routes, that other servers (let's say "LyncFE2") did have available routes, and that it would then route outbound calls to the other servers via the "corp"
NIC.
Thoughts?

Hi,
As the available route is associated with Lync client policy. So If you want to use the other route, you need to associate these users client policy with those route using Lync Server Control Panel or Lync Server Management Shell.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

WCCP flows during Lead WAE Failure

Similar Messages

Maybe you are looking for