WCS shows incorrect AP names on the heat maps

After priming nine APs, removing them from the system, installing them, and firing them up, I noticed that some of the names of the APs shown on the WCS heatmap are incorrect.
The names shown start with "AP" followed by the AP MAC address. I made sure that the WLC had the correct AP names (it did - in the case of the attached screen shots, the correct names appear with "612-".)
What is especially odd is that while all the names were correct in the WLC, only some of the AP names were correct in the WCS.
Clicking on the REFRESH button did not fix this. The workaround was to force the WCS to refresh its configuration from the WLC. However, I don't believe that is going to be a long-term solution.
Has anyone else seen this apparent synchronization issue?

I called TAC and they suggested doing a REFRESH FROM CONTROLLER from the WCS.
This seemed to kick the WCS in the pants and the problem has not recurred.
Also, when adding LWAPs, I now do so from the WCS user interface and do not the WLC GUI and this seems to work out better.
- John

Similar Messages

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

How can I show Foreign Key name in the Data model Table window

Hi,
In one of my table, I had a Foreign Key, but that is not indexed. I want to display the name with in the table second window in realtional data model. If it is indexed, then it is showing in third window. How I can show without indexing that column?
Thanks.

I want to show Foreign Key name in the second window.
Thank you for considering my question,
Sundar

T42 Showing Incorrect Adapter Name in Access Connections

I am working on a T42 laptop and installed Access Connections 5.12. I have gone through and did all the prerequisites prior to installation of Access Connections (wireless driver update, UltraNav Driver upgrade, Video Upgrade, BIOS upgrade, LAN driver update, etc). I have created a profile for a wireless network that is in range and operational. My problem is the adapter is showing incorrectly within Access Connections. This wireless adapter is identified correctly in device manager as "11b/g Wireless LAN Mini PCI Adapter". But in Access Connections, it is showing as "Intel(R) WiFi Link 5300 AGN". I am needing this to identify the correct adapter to get Access Connections to work. Any ideas?

Hi jeremieolson,
Unless you need to use Access Connections to switch among multiple *wired* networks, I'd suggest simply un-installing Access Connections and using the built-in Windows tools for establishing your wireless connection. Windows will let you establish wireless profiles just like Access Connections does. AFAIK Access Connections doesn't add anything to the built-in Windows wireless networking, and in your case it's misbehaving, so...
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

UD Datasource Proposal Tab Shows Incorrect Column Names

I created a UD datasource in BW and the "Proposal" tab showed me the correct column names for the table I had selected. A couple of column names were then changed for this table in the source system but they are not showing up in the "Proposal" tab (the old column names are still there). I refreshed and reactivated the source system in BW but it didn't work. Any ideas on how to get the new column names to show up in the "Proposal" tab? Thanks for any help on this.

hi,
check with the following steps you carried out in the ud data source creation.
You are in the DataSource tree in the Data Warehousing Workbench.
       1.      Select the application components in which the DataSource is to be created and choose Create DataSource.
       2.      In the next screen, enter a technical name for the DataSource, select the type of the DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      If necessary, specify if the DataSource builds an initial non-cumulative and supplies potentially duplicate data records within a request.
       4.      Go to the Extraction tab page.
                            a.      Define the delta method for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      UD Connect does not support real-time data acquisition.
                            d.      The system displays Universal Data Connect (Binary Transfer) as the adapter for the DataSource.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the UD Connect source object.
The connection to the UD Connect source is established. All source objects that are available in the selected UD Connect source can be selected using input help. Source objects can be multi-dimensional storage or relational objects.
       5.      Go to the Proposal tab page.
The system displays the elements of the source object (for JDBC for example fields, or for XMLA and ODBO characteristics and key figures) and creates a mapping proposal for DataSource fields. The mapping proposal is based on the similarity of the names of the source object element and DataSource field and the compatibility of the respective data types.
Note that source object elements can have a maximum of 90 characters. Both upper and lower case are supported.
                            a.      Check the mapping and change the proposed mapping as required. Assign the non-assigned source object elements to free DataSource fields.
You cannot map elements to fields if the types are incompatible. The system produces an error message in this case.
                            b.      Under Copy to Field List, select the fields that you want to transfer to the field list for the DataSource. All fields are selected by default.
       6.      Maintain the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page.
                            a.      Under Transfer, specify the decision-relevant DataSource fields that should be available for extraction and transferred to BI.
                            b.      If required, change the values for the key fields of the source.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                            c.      If required, change the data type for a field.
                            d.      Specify whether the source provides the data in the internal or external format.
                            e.      If you choose an External Format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              f.      If required, specify a conversion routine that converts data from an external format into an internal format.
                            g.      Select the fields for which you want to be able to set selection criteria when you schedule a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            h.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              i.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
Note
If you did not transfer the field list from a proposal, you can define the fields of the DataSource directly. Choose Insert Row and enter a field name. You can specify InfoObjects in order to define the DataSource fields. Under Template InfoObject, specify InfoObjects for the fields of the DataSource. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
Result
The DataSource is created and added to the DataSource overview for the UD Connect source system in the application component in the Data Warehousing Workbench. When you activate the DataSource, the system generates a PSA table and a transfer program.
You can now create an InfoPackage. You define the selections for the data request in the InfoPackage. The data can be loaded into the entry layer of the BI system, the PSA. Alternatively you can access the data directly if the DataSource allows direct access and you have a VirtualProvider in the definition of the data flow.
http://help.sap.com/saphelp_nw70/helpdata/en/bc/ed1640b7b6dd5fe10000000a155106/frameset.htm
hope this give you an idea
regards
harikrishna N

I still can't erase an incorrect user name from the password file.

I have been using a web site for a long time. Suddenly the user name that is supposed to be stored in my "password/user name" file is not working. I totally deleted the web site from that folder. When I go to log in, it still automatically comes up with an incorrect user name.
Example:
The correct user name is "[email protected]", but Firefox is coming up with "ab%49gmail.com"
All of this even though when I went to the Security tab and have deleted the web site from the file, completely, Firefox still brings up the wrong user name when I go to log in.

Use these steps to remove saved (form) data from a drop-down list:
#click the (empty) input field on the web page to open the drop-down list
#highlight an entry in the drop-down list with the mouse or cursor Down key<br>do not click the mouse or press the Enter key
#press the Delete key (on Mac: Shift+Delete) to delete the highlighted entry

OBIEEReports called through Office Plugin showing incorrect dimension names

Hi
I have a few reports created in Answers which are being displayed perfectly fine in OBIEE Portal. But when I am trying to fetch the same reports in a Power Point or an Excel using MS Office Plugin, I get saw_0, saw_1, ... in place of actual dimension names in some reports. Though it works fine in some other reports. I can see no difference in the properties or any other setting of the reports which are working fine and which are not.
Any help will be highly appreciated.

Looks like there is a bug in Office Plugin of OBIEE wherein if there is an underscore (_) in name of the dimension, Office Plugin ignores the part of the name which is before the underscore and thats why assigns the default names saw_0, saw_1 etc. to unknown dimension names.
The problem doesn't come for reports which are coming out of those dimensions which are either having single word names or multiple word names with spaces (because in case of spaces, the OBIEE engine automatically assigns double quotes to the name of the dimension and makes it recognisable to Office plugin)

Can you make each page show a different name in the pages panel?

I would like to be able to name each page with a different name so they display in the pages panel (under the page icon) with a different name for each page rather than just 1, 2, 3 etc. eg. page one called 'Matt', page 2 called 'Satin', page 3 'Gloss. Is this possible?
Thanks

Yes, but it might not work the way you fully intend.
On each page in the "pages" panel, right click and choose 'Numbering & Section Options'.
From the popup, select 'Start Page Numbering At' and add the page number. Eg, Page 1 would be 1, Page 2 would be 2 etc (you need to do this for each page)If you don't want numbers, you can select from their 'Style' dropdown but you must select something
In the 'Section Prefix' box, enter the text you would like displayed - Matt, Satin, Gloss etc
If you want these names to show up in the document as a page number, select 'Include prefix when numbering pages'
The result of this is that each page is now it's own section of the document.

After downloading to my IPOD, the songs are shown but are also seperated by the album names. Is there a way to not show these album names on the IPOD? I just want to see song titles and nothing else! S

After sync'ing my IPOD, the songs on my IPOD are separated by the album names from which they were downloaded from. Can I get rid of those album names on my IPOD somehow? I'd like to show nothing but the songs as I search thru the artists......
Please help......Apple/IPOD illiterate.....

Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.

When setting the split-days to "every 15 minutes," the week and comparison views show incorrect time ranges for the day

When I change the "split-days" interval time, under Options > Settings, to
15, or every 15 minutes, the week and comparison views don't show the correct
time range for the day.
<P>
For example, if I click View to display the calendar and then click Week to get
a weekly view, the time range displayed is from 6:00 a.m.
to 4:00 p.m. If I click Comparison to get a
comparison view, the time range displayed is from 12 p.m.
to 6:45 p.m.
<P>
In this example, should both of these views show the same time range, from
9:00 a.m. to 4:00 p.m.?
No, the two views will not necessarily show the same time range. The time
range for the comparison view will start at the beginning prefs time only
if you have something scheduled (on any day of the week) starting at that
time. For example, on one of the days during your week of comparison, if you
create an event that starts at 9:00 a.m. and then open the comparison view, the
time range displayed will start with 9:00 a.m.
<P>
Additionally, view times will expand past the configured settings if events
span past the time range. That is, if you have an event that spans from
5:00 p.m. to 8:00 p.m., the event will be reflected in the view, even though
your time range may be set to go only to 6:00 p.m.

Umm yes.
The settings are stored in ''prefs.js'', so you could swap various copies of this file in and out.
However, the system will load ''prefs.js'', then, if present, ''user.js'' , so you can set up just your changes in ''user.js'' .
The sort of line you need to look for is like this:
<code>user_pref("mail.server.server14.check_time", 10);</code>
You'll need to do some research to identify which of your accounts is which.
Search for the account's email address:
<code>user_pref("mail.identity.id10.useremail", "xenos@example.com");</code>
Use the id number to locate the account number:
<code>user_pref("mail.account.account29.identities", "id10");</code>
Use the account number to find the server number:
<code>user_pref("mail.account.account29.server", "server14");</code>
Finally, you can then use the server number find the account's time setting:
<code>user_pref("mail.server.server14.check_time", 10);</code>
This last entry may not exist, if you have never changed the setting from the default 10 minutes.
Do be careful with your typing and copy/pasting; if the file fails the syntax parser it will silently fail.
And make sure Thunderbird is shut down when you do the swap. If it's open, it may overwrite changes, and in any case, it only reads the settings file when it starts up.

Mail shows incorrectly my username in the "To" field

Hi,
I'm using Mail 8.1 on Mac OS X Yosemite. I configured Mail to fetch mails from my gmail account and it works. But it seems that Mail incorrectly substitutes my gmail account for words "State Holidays" in the "To" field. It happens only with the gmail account, other accounts (not gmail ones) don't have this issue.
Here I have a screenshot one of the mails. It's in Russian, but I translated the major part.
I have been using my Mac for a year, but noticed the issue only about two or less mouths ago and relate it with the upgrade to Yosemite.

Hi Alex,
Thanks for reply. I tried that, but no one of the fields contain the phrase, please look at the screenshot
Dmitry

How can I use filters to show sequential quarters in a table - Heat Map

I need to sum sales for this quarter and last quarter, then do a percent change calculation in one table in 11g
It needs to look like this:
Product X, Last Qtr, This Qtr, % Change
Prod_123, $100, $150, 50%
I've tried creating one analysis for "Last Qtr" and an identical analysis for "This Qtr" and then tried using each as a filter for the two sales amounts but it isn't working.
I know this is possible as I've seen articles written about this - but no examples or screen pictures so far.
Anybody know how to do this?
Thanks in advance!

sorry but I still don't see how that would work.
Create a new query - Start with "Fiscal Year" and Filter it for 2012. Add Fiscal Month number and filter it for "11;12", last add the "Sales Amount" fact. You should get a result with two rows, one for month 11 and one for month 12, each with a "Sales Amount" like this:
Fiscal Year Fiscal Month Number Sales Amount
2012 11 $100
2012 12 $150
The problem is that I need month 11 and month 12 as separate columns on the same row so I can do a calculation on them. Like this:
Fiscal Year Month 11 Sales Month 12 Sales Month12/Month 11
2012 $100 $150 1.50
This is what I am doing that is not working:
1) With the first analysis above - set the month filter to "11" and save the analysis as "Month 11 Sales Amount"
2) With the first analysis above - set the month filter to "12" and save the analysis as "Month 12 Sales Amount"
Now I have two analysis to use with the "is based on results of another analysis" filter in a third analysis. One filter anaysis for each month.
3) With one of the above two analysis - remove the filters and save as "Month 12/Month 11 Sales Amount"
4) Add another "Sales Amount" column to the analysis - so now we have a Fiscal Year, Fiscal Month Number, Sales Amount, Sales Amount columns
5) Add filter to the first "Sales Amount" column using the "is based on results of another analysis" option and select the "Sales Amount" column of the "Month 11 Sales Amount" analysis
This results in only the Month 11 sales amount being returned.
6) When I add the Month 12 Sales Amount analysis as a filter for the second "sales Amount" column - as expected - no values are returned....
So - How do you get this:
Fiscal Year Month 11 Sales Month 12 Sales Month12/Month 11
2012 $100 $150 1.50
Without using SQL or Pivot views?

Is it possible to turn off the 'Heat map' in Calendars

I have searched advanced settings in Calender and don't have a setting to check or uncheck .
Any suggestions would be appreciated.

photonewb,
If you want to display a blank calendar in Year view go to Calendar>Preferences...>Advanced> uncheck "Show events in year view."

From line on emails shows incorrectly

i belong to a group where i must send an email to the entire group at once, because it is a group mail it will also come to my inbox. the problem is the "from" line shows someone else's email, when i send the same email from my other email client the "from" line shows my email as it should... i have screenshots of both clients... the thunderbird one shows incorrectly. i have contacted the group owner and my emails are not moderated and my email shows as sender on her end.
why is my thunderbird showing the incorrect email in the "from" line... it is a valid email but it is not mine
is there a way for me to post screenshots to explain better?

lets test that shall we.
Tools menu > options > Advanced > Reading and display and uncheck the "Show only display name for people in my address book" restart Thunderbird
Does that fix the display issue?

Table name in Oracle for the User Mapping field?

Does anyone know the table name for the user Mapping field in EP6.0?
Thanks

Hi Alan,
why do you want to access the DB directly?! You can access the information via the Java API, which is in general the most secure way for the DB scheme is always "subject to change without notice"...
Best regards
Detlev

WCS shows incorrect AP names on the heat maps

Similar Messages

Maybe you are looking for