WD ABAP - ALV data into Xstring

Hello,
In a WD ABAP application, there is a ALV table and on the ALV tool bar I have a new push button, when it is pressed, I need to extract the ALV data(along with column names) into XSTRING, which is similar to the data that comes into PDF when 'Printversion' button is pressed. Is there any way to do this?
Thanks.
Nagendra

Solved the problem. The requirement was to convert ALV into PDF xstring. The sample code is .
DATA: lo_interfacecontroller1 TYPE REF TO iwci_salv_wd_table ,
        lo_component            TYPE REF TO cl_salv_wd_c_table,
        lo_result               TYPE REF TO cl_salv_wd_result_data_table,
        lo_pdf                  TYPE REF TO cl_salv_wd_export_pdf,
        lv_pdf_content          TYPE xstring.
lo_interfacecontroller1 =   wd_this->wd_cpifc_alv( ).
lo_component ?= lo_interfacecontroller1->get_services( ).
lo_result = lo_component->r_result_data.
CREATE OBJECT lo_pdf.
CLEAR: lv_pdf_content.
Call the following method to generate the xstring for PDF.
lo_pdf->execute(
    EXPORTING
       result_data = lo_result
       r_component = lo_component
    IMPORTING
       resultstring = lv_pdf_content ).

Similar Messages

How to save ALV data into DB after Editing values in WDA

Hi All,
I have created a WD application with and able to successfully make columns editable in ALV. But I failed when trying to save the edited data in database.
I use ON_CELL_ACTION event but its not working as of now. I go through few blocks but ultimately i got confused. Please guide me in correct way.

Hi Sanjib,
ON_DATA_CHECK event is triggered every time when you change the data in table
For this event, you have to implement an Event Handler method in which the logic is written.
There is already a thread where this question has been answered:
ALV Edit how to save changes to DB??
I would suggest that you search more on scn before starting a discussion
Regards,
Ashvin

How to download data into XLSX file in ABAP ECC 6.0 using FM: GUI_DOWNLOAD or any other FunctionModules

Hi ABAP Exterts,
Any one help on this , there is a requirement to download the data into XLSX file only.
I am able to to download the data into XLS file using the FM: GUI_DOWNLOAD in SAP ECC 6.0and also opening the file . But when i download the data into XLSX file . I am able to download the data into GUI_DOWNLOAD. But while opening the file i am getting the below mentioned error.
'Excel cannot open the file 'filename.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'
Ok buttom is coming not able to open the file.
When i use the FM: SAP_CONVERT_TO_XLS_FORMAT to download the XLS it self it is going abap DUMP that file type error.
Any one help any Function Module or how to download data through abap programing into XLSX file.
Thanks.
Murali.
Message was edited by: Matthew Billingham - adjusted wording...

If you want to download your ALV to an .XLXS format file, with all the formatting intact, please try the following code. I have tried to create a custom Function module Z_EXCEL_DOWNLOAD_TEST wherein I pass all the callback variables, the final ALV internal table and all the ALV details like field catalog, sort, layout, event list and so on, along with the concatenated file path and file name in I_FILE. I have used a custom class ZCL_SALVEXPORT_XML which is a copy of the standard class CL_SALV_EXPORT_XML_DIALOG, with few modifications in Method: EXECUTE and Method: DOWNLOAD. The methods where I have modified the code are also shown at the end.
****************Global declarations***********************
TYPE-POOLS: slis,
kkblo.
TYPES: t_fccls(1) TYPE c OCCURS 0.
TYPES: BEGIN OF ty_nosum,
fieldname     TYPE kkblo_fieldname,           "Field name
tabname       TYPE kkblo_tabname,             "Table name
fieldname_dep TYPE kkblo_fieldname,           "Field name
tabname_dep   TYPE kkblo_tabname,             "Table name
index         TYPE sy-index,                  "Index
END OF ty_nosum.
TYPES: t_nosum TYPE TABLE OF ty_nosum INITIAL SIZE 0 WITH NON-UNIQUE DEFAULT KEY.
TYPES: BEGIN OF ty_dep_field,
s_dep_fieldcat TYPE kkblo_fieldcat,            "Field cat
t_ref_fieldcat TYPE kkblo_t_fieldcat,          "Field cat
END OF ty_dep_field.
TYPES: BEGIN OF ty_ref_field,
s_ref_fieldcat TYPE kkblo_fieldcat,           "Field cat
s_dep_fieldcat TYPE kkblo_fieldcat,           "Field cat
END OF ty_ref_field.
TYPES: t_dep_field TYPE ty_dep_field OCCURS 0.        "
TYPES: t_ref_field TYPE ty_ref_field OCCURS 0.
TYPES: BEGIN OF ty_memory,
object(20) TYPE c,                        "Object
memcount(4) TYPE c,                        "count
END OF ty_memory.
*ALV Customer Wrapper
TYPES: BEGIN OF ty_type_header_info,
tabname   TYPE kkblo_tabname,            "Table name
fieldname TYPE kkblo_fieldname,          "Field name
sequence TYPE i,                        "Sequence
field     TYPE char80,                    "Field
pagno     TYPE sypagno,                   "Page num
linno     TYPE sy-linno,                  "Current Line in List
colno     TYPE sy-colno,                  "Current List Column
END   OF ty_type_header_info,
t_type_header_info TYPE SORTED TABLE OF ty_type_header_info
WITH UNIQUE KEY tabname fieldname.
TYPES: BEGIN OF ty_type_row_info,
tabname   TYPE kkblo_tabname,            "Table name
tabindex TYPE syindex,                  "Index
field     TYPE char80,                   "Field name
pagno     TYPE sypagno,                  "Page num
linno     TYPE sy-linno,                 "Current Line in List
colno     TYPE sy-colno,                 "Current List Column
END   OF ty_type_row_info,
t_type_row_info TYPE SORTED TABLE OF ty_type_row_info
WITH UNIQUE KEY tabname tabindex.
TYPES: BEGIN OF ty_type_sel_header,
tabname   TYPE kkblo_tabname,           "table name
fieldname TYPE kkblo_fieldname,         "field name
END   OF ty_type_sel_header,
t_type_sel_header TYPE SORTED TABLE OF ty_type_sel_header
WITH UNIQUE KEY tabname fieldname.
TYPES: BEGIN OF ty_type_sel_row,
tabname   TYPE kkblo_tabname,
tabindex TYPE syindex,
END   OF ty_type_sel_row,
t_type_sel_row TYPE SORTED TABLE OF ty_type_sel_row
WITH UNIQUE KEY tabname tabindex.
TYPES: BEGIN OF ty_type_sel_cell,
tabname   TYPE kkblo_tabname,
tabindex TYPE syindex,
fieldname TYPE kkblo_fieldname,
END   OF ty_type_sel_cell.
TYPES: BEGIN OF ty_type_selections,
t_row_info         TYPE t_type_row_info,
t_header_info      TYPE t_type_header_info,
t_selected_headers TYPE t_type_sel_header,
t_selected_rows    TYPE t_type_sel_row,
s_current_cell     TYPE ty_type_sel_cell,
set_headers        TYPE sap_bool,
set_rows           TYPE sap_bool,
set_current_cell   TYPE sap_bool,
END   OF ty_type_selections.
TYPES: BEGIN OF ty_stack3,
r_grid         TYPE REF TO cl_gui_alv_grid,        "Y6DK050176
r_salv_adapter TYPE REF TO if_salv_adapter,
s_selections   TYPE ty_type_selections,
r_print_state TYPE REF TO if_alv_print_parameter_proxy, "Y6DK075821
suppress_empty_data TYPE abap_bool,
END OF ty_stack3.
TYPES: t_stack3 TYPE ty_stack3 OCCURS 0.
TYPES: BEGIN OF ty_stack,
i_callback_program       TYPE sy-repid,
i_callback_user_command TYPE kkblo_formname,
i_callback_top_of_page   TYPE kkblo_formname,
i_callback_top_of_list   TYPE kkblo_formname,
i_callback_end_of_page   TYPE kkblo_formname,
i_callback_end_of_list   TYPE kkblo_formname,
i_callback_pf_status_set TYPE kkblo_formname,
i_callback_fieldcat_save TYPE kkblo_formname,
i_callback_layout_save   TYPE kkblo_formname,
i_tabname                TYPE kkblo_tabname,
i_tabname_slave          TYPE kkblo_tabname,
is_keyinfo               TYPE kkblo_keyinfo,
is_layout                TYPE kkblo_layout,
it_fieldcat              TYPE kkblo_t_fieldcat,
i_fctype(1)              TYPE c,
it_excluding             TYPE kkblo_t_extab,
it_special_groups        TYPE kkblo_t_sp_group,
it_sort                  TYPE kkblo_t_sortinfo,
it_except_qinfo          TYPE kkblo_t_qinfo,
is_sel_hide              TYPE kkblo_sel_hide,
t_columns                TYPE kkblo_t_columns,
t_filter                 TYPE kkblo_t_filter,
s_lprint                 TYPE kkblo_lprint,
print_line_break         TYPE char1,
t_isetab                 TYPE kkblo_seldis,
t_fccls                  TYPE t_fccls,
t_sfinfo                 TYPE kkblo_t_sfinfo,
t_ref_field              TYPE t_ref_field,
t_dep_field              TYPE t_dep_field,
flg_default_status(1)    TYPE c,
flg_selections           TYPE char1,
flg_allow_no_selection   TYPE char1,
flg_input                TYPE char1,
flg_called               TYPE char1,
flg_popup                TYPE char1,
flg_endlist              TYPE char1,
listtype                 TYPE char1,
actcols                  TYPE i,
is_list                  TYPE char1,
END OF ty_stack.
TYPES: t_stack TYPE ty_stack OCCURS 0.
TYPES: BEGIN OF ty_stack2,
button_col1(20)                TYPE c,
button_col2(20)                TYPE c,
button_col3(20)                TYPE c,
button_col4(20)                TYPE c,
button_col5(20)                TYPE c,
s_header                       TYPE kkblo_header,
t_sfinfo_slave                 TYPE kkblo_t_sfinfo,
t_suminfo                      TYPE kkblo_t_sfinfo,
t_sfsave                       TYPE kkblo_t_sfinfo,
t_nosum                        TYPE t_nosum,
window_title                   TYPE rsmpe-tittext, " Item_selection
flg_scroll_to_line(1)          TYPE c, " Item_selection
flg_top_of_page(1)             TYPE c,
flg_subtot(1)                  TYPE c,
flg_output_in_progress(1)      TYPE c,
flg_grouplevels(1)             TYPE c,
flg_groupedit(1)               TYPE c,
flg_calculate_totals(1)        TYPE c,
sumlevel                       TYPE sy-tabix,
memory_stack1                  TYPE ty_memory,
memory_stack2                  TYPE ty_memory,
memory_outtab                  TYPE ty_memory,
t_colmark                      TYPE kkblo_t_colmark,
t_rowmark                      TYPE kkblo_t_rowmark,
it_event_exit                  TYPE kkblo_t_event_exit,
t_groups                       TYPE kkblo_t_grouplevels,
t_filter_groups                TYPE kkblo_t_grouplevels,
s_subtot_options               TYPE kkblo_subtot_options,
flg_append_mode(1)             TYPE c,
is_reprep_id                   TYPE kkblo_reprep_id,
i_callback_before_line_output TYPE kkblo_formname,
i_callback_after_line_output   TYPE kkblo_formname,
i_callback_foreign_top_of_page TYPE kkblo_formname,
i_callback_foreign_end_of_page TYPE kkblo_formname,
i_callback_list_modify         TYPE kkblo_formname,
i_callback_top_of_coverpage    TYPE kkblo_formname,
i_callback_end_of_coverpage    TYPE kkblo_formname,
i_callback_grouplevel_change   TYPE kkblo_formname,
i_callback_item_data_expand    TYPE kkblo_formname,
i_callback_header_transport    TYPE kkblo_formname,
i_callback_reprep_sel_modify   TYPE kkblo_formname,
i_callback_subtotal_text       TYPE kkblo_formname,
END OF ty_stack2.
TYPES: t_stack2 TYPE TABLE OF ty_stack2 INITIAL SIZE 0.
** *--- iTables
DATA: it_stack TYPE t_stack WITH HEADER LINE.
DATA: it_stack2 TYPE t_stack2 WITH HEADER LINE.
***ALV Customer Wrapper
DATA: it_stack3 TYPE t_stack3 WITH HEADER LINE.
CONSTANTS: BEGIN OF c_con_listtype,
simple(1)    TYPE c VALUE 'S',
hier_sequ(1) TYPE c VALUE 'H',
matrix(1)    TYPE c VALUE 'M',
END OF c_con_listtype.
DATA:   gv_callback_program1      TYPE sy-repid,
gv_callback_user_command1 TYPE kkblo_formname,
gv_callback_top_of_page1 TYPE kkblo_formname,
gv_callback_top_of_list1 TYPE kkblo_formname,
gv_callback_end_of_page1 TYPE kkblo_formname,
gv_callback_end_of_list1   TYPE kkblo_formname,
gv_callback_pf_status_set1 TYPE kkblo_formname,
gv_callback_layout_save1    TYPE kkblo_formname,
gv_callback_fieldcat_save1 TYPE kkblo_formname,
gv_callback_grouplevel_change1 TYPE kkblo_formname,
gv_callback_before_line_otput1 TYPE kkblo_formname,
gv_callback_after_line_otput1 TYPE kkblo_formname,
gv_callback_foreign_top_of_pg1 TYPE kkblo_formname,
gv_callback_foreign_end_of_pg1 TYPE kkblo_formname,
gv_callback_list_modify1          TYPE kkblo_formname,
gv_callback_top_of_coverpge1     TYPE kkblo_formname,
gv_callback_end_of_coverpge1     TYPE kkblo_formname,
gv_callback_item_data_expand1     TYPE kkblo_formname,
gv_callback_header_transport1     TYPE kkblo_formname,
gv_callback_reprep_sel_modify1    TYPE kkblo_formname,
gv_callback_subtotal_text1       TYPE kkblo_formname,
gv_layout1   TYPE kkblo_layout,
gv_fieldcat1 TYPE kkblo_t_fieldcat,
gv_fctype1 TYPE c,
gv_event_exit1 TYPE kkblo_t_event_exit,
gv_excluding1   TYPE kkblo_t_extab,
gv_special_groups1 TYPE kkblo_t_sp_group,
gv_sort1 TYPE kkblo_t_sortinfo,
gv_filter1 TYPE kkblo_t_filter,
gv_except_qinfo1 TYPE slis_t_qinfo_alv,
gv_sel_hide1 TYPE slis_sel_hide_alv,
gv_reprep_id1   TYPE slis_reprep_id,
gv_screen_start_column1 TYPE i,
gv_salv_adapter1   TYPE REF TO if_salv_adapter,
gv_suppress_empty_data1 TYPE sap_bool.
FUNCTION z_excel_download_test.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_BYPASSING_BUFFER) TYPE CHAR01 OPTIONAL
*"     REFERENCE(I_BUFFER_ACTIVE) OPTIONAL
*"     REFERENCE(I_CALLBACK_PROGRAM) TYPE SY-REPID OPTIONAL
*"     REFERENCE(I_CALLBACK_USER_COMMAND) OPTIONAL
*"     REFERENCE(I_CALLBACK_TOP_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_TOP_OF_LIST) OPTIONAL
*"     REFERENCE(I_CALLBACK_END_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_END_OF_LIST) OPTIONAL
*"     REFERENCE(I_CALLBACK_PF_STATUS_SET) OPTIONAL
*"     REFERENCE(I_CALLBACK_LAYOUT_SAVE) OPTIONAL
*"     REFERENCE(I_CALLBACK_FIELDCAT_SAVE) OPTIONAL
*"     REFERENCE(I_CALLBACK_GROUPLEVEL_CHANGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_BEFORE_LINE_OUTPUT) OPTIONAL
*"     REFERENCE(I_CALLBACK_AFTER_LINE_OUTPUT) OPTIONAL
*"     REFERENCE(I_CALLBACK_FOREIGN_TOP_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_FOREIGN_END_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_LIST_MODIFY) OPTIONAL
*"     REFERENCE(I_CALLBACK_TOP_OF_COVERPAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_ITEM_DATA_EXPAND) OPTIONAL
*"     REFERENCE(I_CALLBACK_END_OF_COVERPAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_HEADER_TRANSPORT) OPTIONAL
*"     REFERENCE(I_CALLBACK_REPREP_SEL_MODIFY) OPTIONAL
*"     REFERENCE(I_CALLBACK_SUBTOTAL_TEXT) OPTIONAL
*"     REFERENCE(I_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*"     REFERENCE(I_FCTYPE) DEFAULT 'R'
*"     REFERENCE(IT_EXCEPT_QINFO) TYPE SLIS_T_QINFO_ALV OPTIONAL
*"     REFERENCE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*"     REFERENCE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
*"     REFERENCE(I_SCREEN_START_COLUMN) DEFAULT 0
*"     REFERENCE(I_OO_ALV) OPTIONAL
*"     REFERENCE(IR_SALV_ADAPTER) TYPE REF TO IF_SALV_ADAPTER OPTIONAL
*"     REFERENCE(I_SUPPRESS_EMPTY_DATA) TYPE SAP_BOOL DEFAULT
*"       ABAP_FALSE
*"     REFERENCE(I_FILE) TYPE STRING OPTIONAL
*"     REFERENCE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*"     REFERENCE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*"     REFERENCE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*"     REFERENCE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*"     REFERENCE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*"     REFERENCE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV OPTIONAL
*"     REFERENCE(IS_KEYINFO) TYPE SLIS_KEYINFO_ALV OPTIONAL
*"     REFERENCE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
*"     REFERENCE(IS_LIST_SCROLL) TYPE SLIS_LIST_SCROLL OPTIONAL
*"     REFERENCE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
*"     REFERENCE(IS_LINEINFO) TYPE SLIS_LINEINFO OPTIONAL
*"     REFERENCE(I_REPID) TYPE SYREPID OPTIONAL
*" TABLES
*"      T_OUTTAB TYPE STANDARD TABLE OPTIONAL
*********** Local data declarations******************
DATA: gv_list TYPE char1.
DATA: gv_fcat_complete TYPE sap_bool.
DATA: gv_buffer_active TYPE char01,
wa_variant TYPE disvariant.
DATA: gv_controller TYPE REF TO cl_salv_export_c8r.
DATA: gv_xml           TYPE xstring.
DATA: gv_s_xml_choice TYPE if_salv_bs_xml=>s_type_xml_choice.
DATA: gv_t_xml_choice TYPE if_salv_bs_xml=>t_type_xml_choice.
DATA: gv_param_lvc TYPE if_salv_export=>s_type_param_lvc.
DATA: gv_data       TYPE REF TO data.
DATA: gv_result_data TYPE REF TO cl_salv_ex_result_data_table.
DATA: gv_flavour TYPE string.
DATA: gv_version TYPE string.
DATA:

How to pass table data into below code for alv

hi
i want to pass table data into alvgrid
i dont know how to pass table data.
here instead of passing ABC into internal table
i want to pass table data .
please help me
ialv-test1 = 'ABC'.
form get_data.
ialv-test1 = 'ABC'.
ialv-test2 = 'DEF'.
append ialv.
ialv-test1 = 'GHI'.
ialv-test2 = 'JKL'.
append ialv.
ialv-test1 = '123'.
ialv-test2 = '456'.
append ialv.
endform
thanks in advanced.

Have a look at below links. It gives you sample code of alv grid.
http://sap.niraj.tripod.com/id64.html
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
Have a look at below links for SAP Help.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/e994374c9cd355e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/12/904f42d5f811d2b469006094192fe3/content.htm
Best Regards,
Vibha
*Please mark all the helpful answers

How to upload data into IT0000 using ABAP-HR program

Hello,
I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
Thanks in advance.
Regards
Prabhakar.
Message was edited by:
        Prabhakara Muthyal

Example code for HR_MAINTAIN_MASTERDATA to COPY IT0002
DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
DATA: VALUES        LIKE PPROP OCCURS 10 WITH HEADER LINE,
RETURN        LIKE BAPIRETURN1,.
LOOP AT INT_0002_FINAL.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-PERNR'.
      VALUES-FVAL = INT_0002_FINAL-PERNR.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-BEGDA'.
      VALUES-FVAL = INT_0002_FINAL-BEGDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-ENDDA'.
      VALUES-FVAL = INT_0002_FINAL-ENDDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-nachn'.
      VALUES-FVAL = INT_0002_FINAL-NACHN.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gblnd'.
      VALUES-FVAL = INT_0002_FINAL-GBLND.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-vorna'.
      VALUES-FVAL = INT_0002_FINAL-VORNA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-rufnm'.
      VALUES-FVAL = INT_0002_FINAL-RUFNM.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-name2'.
      VALUES-FVAL = INT_0002_FINAL-NAME2.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-inits'.
      VALUES-FVAL = INT_0002_FINAL-INITS.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-famst'.
      VALUES-FVAL = INT_0002_FINAL-FAMST.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gbdat'.
      VALUES-FVAL = INT_0002_FINAL-GBDAT.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-sprsl'.
      VALUES-FVAL = INT_0002_FINAL-SPRSL.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-anzkd'.
      VALUES-FVAL = INT_0002_FINAL-ANZKD.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-natio'.
      VALUES-FVAL = INT_0002_FINAL-NATIO.
      APPEND VALUES.
* maintain master data
      CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
        EXPORTING
          PERNR           = INT_0002_FINAL-PERNR
          ACTIO           = 'COP'
          BEGDA           = INT_0002_FINAL-BEGDA
*         ENDDA           = INT_0002_FINAL-ENDDA
          SUBTY           = SPACE
          NO_ENQUEUE      = SPACE
          DIALOG_MODE        = '0'
          TCLAS              = 'A'
        IMPORTING
          RETURN1         = RETURN
        TABLES
          PROPOSED_VALUES = VALUES
*         MODIFIED_KEYS   =
        EXCEPTIONS
          OTHERS          = 1.
      IF RETURN IS INITIAL.
        WRITE:/' Done....'.
      ELSE.
        WRITE:/   RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
      ENDIF.
      CLEAR VALUES.
      REFRESH VALUES.
    ENDLOOP.

How to convert the alv list data into pdf format

Hi Expersts,
Is it possible to convert the alv list output data into PDF format? if yes, then please help me with this issue.
thanks in advance,
Regards,
Samad

hii samad,
you can go through these link.i hope it ll solve your purpose
How to convert list output to PDF
Display ALV list output in PDF format
regards,
Shweta

How to send ALV output data into Excel sheet format via Mail to the user?

Hi friends,
I have a doubt ie,
How to send ALV output data into Excel sheet format via Mail to the user?
regards
Moosa

Hi,
Provide the output internal table to the objbin in the below FM
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            document_data              = i_docdata
            put_in_outbox              = c_x
       TABLES
            packing_list               = i_objpack
            object_header              = i_objhead
            contents_bin               = i_objbin
            contents_txt               = i_objtxt
            receivers                  = i_reclist
and specify the document type
i_objpack-doc_type   = 'XLS'.
and try.
Regards,
Nandha

Web Dynpro ABAP - ALV - insert data

hi,
I have got the following task.
I need to insert a new row into an alv table that shall be editable (data to be edited in the table, where
a) the other rows of the table, that already exist must not be editable
b) some columns of the new row are to be initialized with values when creating new row
can you help here?
more precise description of the task/problem
to a) all I found is the possibility to make columns editable, if I wanted to edit new inserted fields directly in the table. This would give the possibility to also edit the rows that are already there and where the data should not be modified...
to b) I tried with a propriarity button in wddoinit. DATA lr_btn_new TYPE REF TO cl_salv_wd_fe_button.
DATA lr_fct_new TYPE REF TO cl_salv_wd_function.
CREATE OBJECT lr_btn_new.
lr_btn_new->set_text( 'Request New').
lr_fct_new = lo_model->if_salv_wd_function_settings~create_function( id = 'BTN_NEW' ).
lr_fct_new->set_editor( lr_btn_new ).
and than call an on_function event handler, but now got the problem that I do not know how to insert the row to the table....

Hi,
Inserting new row is very simple,just modify your internal table which is attached to the ALV table in the onFunction Event handler method like.
data: wa_tab type wd_this->elem_flights. "work area is of type context node(structure),now this is empty
it_flights type table of wd_this->elem_flights,
v_lines type i.
Now read the context node data into internal table.
navigate from <CONTEXT> to <FLIGHTS> via lead selection
lo_nd_flights = wd_context->get_child_node( name = wd_this->wdctx_flights ).
CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
IMPORTING
TABLE = lt_flights.
Modify the internal table from workarea.
describe table lt_flights lines v_lines.
modify lt_flights from ls_flights index v_lines. This is to add empty row at the last in the table
Now bind the internal table to context node.
To make entire row is editable check this forum threads and articles which i already answered.
Cell Edit/ Row Edit in ALV WDA
How to make all columns of alv editable
Also check this article for conditionally editable.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393

Tools to upload data into SRM 7.0 with webdynpro for ABAP

Hi,
Webdynpro for abap is used in SRM70.
I need to load data in SRM70 (product category...).
ECATT is not working with web dynpro for abap.
What other tools can i use to load data in SRM70 ? LSMW ?
I would like to avoid to create a Z program to load data into SRM70...
Thanks,
Kind regards,
Yann

Hello Yann.
welcome . we read your wonderful threads and they are useful to coomunity forever.
I am not aware much.
Product category is a permanent data right . i think we may not frequently change the data right.
Does your business want very frequent update on product category?
I believe if we make frequent changes/modify of data we may use LSMW .
i think your zprogram is a best method to upload the product category.
As you aware we can not change the product category as per standard.For eg. If i create a local product category /hierarchy .Even i can not rename them.
category/hierarchy creation are one time activity in SRM.
please correct me.
regards
Muthu

ABAP short dump when loading data into Infocube

Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv

Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI

Populate data into standard component alv from Zcomponent popup data selected

HI All
I have to call Zcomponent in standard component and need to pass value into Zcomponent (table) and from Zcomponent select row and pass back to standard component.
Steps
1) Created Zcomponent with interface node
2) Enhanced the standard component and create used components for Zcomponent and make it available at component controllers and view controllers.
When I click on Button in standard component I am calling this Zcomponent as popup window.
My problem I when I select data in Zcomponent I need to populate the data in ALV of standard component.
I thought of 2 methods to take my selected back and populate data into standard component ALV.
1) Create event: EVENT1 and   Interface method Method1 and link to EVENT1
So that I can raise this event in Zcomponent and populate the data into standard component ALV
Problem: Under events interface checkbox is visible, when I select my enhancement implementation the interface checkbox not visible under events tab?.
2) Create Interface method Method1 write logic to populate data into standard component ALV
But here to when I select my enhancement implementation the interface checkbox not visible under?
Can anyone please help me why interface checkbox is not visible or any better solution to populate the data back to standard component alv?
Thanks
Gopal

Hi Gopal,
You can achieve your requirement by using EVENTS as below
Create an event SET_DATA in component controller of zcomponent and mark it as interface and also include the parameters like context_element( type ref to if_wd_context_element), etc as below
Now, create an action for the event onLeadSelect of your zcomp Table and write the below code
                 DATA lo_ctx_element TYPE REF TO if_wd_context_element.
               "get the selected row
                 lo_ctx_element = wdevent->get_context_element( name =
                    'NEW_ROW_ELEMENT' ).
               "Raise the event with parameter
               wd_comp_controller->fire_set_data_evt( context_element = lo_ctx_element ).
Use the Zcomponent in your standard component and make available in std. view's properties
Create an event handler SET_DATA method for your Zcomp's event as below
Now, inside this method, you get the parameter CONTEXT_ELEMENT and get the data from this context element as below
               context_element->get_attrribute( ) or
               context_element->get_static_attributes( )
You can populate the data into standard component based on the obtained value from Zcomponent.
Hope this helps you.
Regards,
Rama

Convert XML string into an abap format date and time

Hi,
Does anyone know of a method or a function module in ABAP which converts XML string into an abap format date and time.
Here is a part of the xml that I want to convert.
<ns2:EventDateTime>2009-07-02T10:13:45+10:00</ns2:EventDateTime>
<ns2:EventMessageTransmissionDateTime>2009-07-02T10:13:45.987+10:00</ns2:EventMessageTransmissionDateTime>
Currently EventDateTime and EventMessageTransmissionDateTime are type XSDDATETIME_Z and these are converted to proper dates and times. We will be changing these fields to a STRING instead of XSDDATETIME_Z. The reason for this is to make the field more versatile. The customer would be receiving dates with Zulu (2009-09-23T12:00:00Z), with offsets (2009-09-23T12:00:00+10:00/-10:00) and just local timestamp (2009-09-23T12:00:00). With this, we need to make the date fields as string
to be able to accept the various date formats (esp. the local timestamp).
I am looking for a standard function module or method that will convert the xml string to a proper date and time abap format.
Would appreciate anyone's help!
Thanks.
Edited by: eunice ocson on Jul 13, 2009 1:49 AM
Edited by: eunice ocson on Jul 13, 2009 1:50 AM
Edited by: eunice ocson on Jul 13, 2009 1:51 AM
Edited by: eunice ocson on Jul 13, 2009 1:51 AM

Hi Eunice
Use the FM 'SMUM_XML_PARSE'
for more info
[Convert XML string to ABAP|XML String to ABAP or GUI]
hope it helps you.
Thanks!!

Extract FORM data into BINARY format or XSTRING format?

Hello,
Our config: I am developing an VISITOR Adobe Interactive Form, i have Designer 8.1 and Reader 9.0 in my Windows 7 Laptop. When i checked the menu EDIT-->form properties --> Compatability, its Adobe XML form File (XDP)
When i opened this VISITOR interactive form in a browser, right clicking and checked form PROPERTIES, then i saw the "PDF Version: 1.6 (Acrobat 7.x)"
I am using JavaScript
1st user opened the form, entered data, say entered USA in COUNTRY field.
2nd user opened the same form and edited the COUNTRY field from USA to UK.
Pls. let me know is there any way for me to capture the user entered data into a BINARY format or XSTRING or RAW FORMAT or RAW STRIGN
Pls. note i need latest changes, like COUNTRY field hold the value of UK.
Pls. note for some reason, SAVE the form should not come into picture in my case (form will be saved in some workflow (pls. note not adobe's workflow, we hv SAP workflow) staging area in the time lapse of between 1st user and 2nd user,)
Thank you

I am looking WHOLE FORMA DATA in either XSTRING or BINARY FORMAT or any other format, except STRING format.
I gave COUNTRY as an example, but am looking the HWOLE form AS IS
Any help pls.
Thank you

Tcode to upload data into CATSDB table in HR ABAP

Hi All,
Could anyone let me know what is the TCODE to upload data into CATSDB table in HR ABAP.
Regards,
Srinivas.

Thanks for your reply but i'm not able to find the required fields to upload.
those are : pernr - employee number(ok)
workdate - date
awart - att./absence type
lgart - wage type
meinh - unit of measure
catsquantity- quantity number
Regards,
Srinivas

Not able populate correct data into fields in alv report

hi experts,
question: from delivery document number(likp-vbeln) go to delivery items to get lips-matnr,lips-lgort
TYPE-POOLS:SLIS.
TABLES: MARC,LIPS,LIKP,VBAK,VBAP,VBRP.
SELECT-OPTIONS:S_VKORG FOR LIKP-VKORG,
               S_VBELN FOR LIKP-VBELN,
               S_MATGR FOR MARC-MATGR,
               S_AUART FOR VBAK-AUART.
DATA: BEGIN OF ITAB OCCURS 0 ,
       MATGR LIKE MARC-MATGR,
       MATNR LIKE LIPS-MATNR,
       LGORT LIKE LIPS-LGORT,
       WADAT_IST LIKE LIKP-WADAT_IST,
       AUART LIKE VBAK-AUART,
       WAVWR LIKE VBRP-WAVWR,
       KWMENG LIKE VBAP-KWMENG,
       VBELN LIKE LIKP-VBELN,
      VBELN LIKE VBAK-VBELN,
      <GORT TYPE LIPS-LGORT,
       END OF ITAB.
   DATA: BEGIN OF JTAB OCCURS 0,
         VBELN LIKE VBAK-VBELN,
         END OF JTAB.
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
         I_EVENTCAT TYPE SLIS_T_EVENT WITH HEADER LINE.
START-OF-SELECTION.
SELECT AMATNR ALGORT INTO TABLE ITAB   FROM LIPS AS
A INNER JOIN
LIKP AS B ON BVBELN EQ AVBELN WHERE BVBELN IN S_VBELN AND BVKORG
IN
S_VKORG.
ENDSELECT.
*I_FIELDCAT-COL_POS = 1.
*I_FIELDCAT-FIELDNAME = 'VBELN'.
*I_FIELDCAT-TABNAME = 'ITAB'.
*APPEND I_FIELDCAT TO I_FIELDCAT.
*CLEAR I_FIELDCAT.
I_FIELDCAT-COL_POS = 1.
I_FIELDCAT-FIELDNAME = 'MATNR'.
*I_FIELDCAT-TABNAME = 'ITAB'.
I_FIELDCAT-REF_TABNAME = 'MATNR'.
I_FIELDCAT-REF_TABNAME = 'LIPS'.
APPEND I_FIELDCAT .
*CLEAR I_FIELDCAT.
I_FIELDCAT-COL_POS = 2.
I_FIELDCAT-FIELDNAME = 'LGORT'.
*I_FIELDCAT-TABNAME = 'ITAB'.
I_FIELDCAT-REF_TABNAME = 'LIPS'.
APPEND I_FIELDCAT .
*CLEAR I_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK              = ' '
    I_BYPASSING_BUFFER             =
    I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
    I_CALLBACK_PF_STATUS_SET       = ' '
    I_CALLBACK_USER_COMMAND        = ' '
    I_STRUCTURE_NAME               =
    IS_LAYOUT                      =
     IT_FIELDCAT                    = I_FIELDCAT[]
    IT_EXCLUDING                   =
    IT_SPECIAL_GROUPS              =
    IT_SORT                        =
    IT_FILTER                      =
    IS_SEL_HIDE                    =
    I_DEFAULT                      = 'X'
    I_SAVE                         = ' '
    IS_VARIANT                     =
     IT_EVENTS                      = I_EVENTCAT[]
    IT_EVENT_EXIT                  =
    IS_PRINT                       =
    IS_REPREP_ID                   =
    I_SCREEN_START_COLUMN          = 0
    I_SCREEN_START_LINE            = 0
    I_SCREEN_END_COLUMN            = 0
    I_SCREEN_END_LINE              = 0
IMPORTING
    E_EXIT_CAUSED_BY_CALLER        =
    ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = ITAB
EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
i am unable to populate correct data into fields i am getting matnr values as all 1's
and lgort as empty
can anyone help me out
thanks.

HI there
This is what i found on the Forum
"You can use FM RS_VARIANT_CONTENTS to display ONE variant associated to a report
If you want to see the information of ALL VARIANTS associated to a report I think the only way is checking table VARID to get all the variants associated to the report and then do a loop and call RS_VARIANT_CONTENTS for each variant."
Regards
Tatenda

WD ABAP - ALV data into Xstring

Similar Messages

Maybe you are looking for