WD Mybook not recognized

I have a 320GB Mybook used on a G4 iBook that worked fine via firewire or USB last week. Now however, when i plug in the Mybook, it's not recognized as another drive. The only thing I did recently was repair permissions and clean cache w/ Onyx. I don't see how that could have done anything.
Any suggestions on how I can trouble-shoot this and get the Mybook drive to mount? thx!

nurun:
Try Repair Disk:
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your externall HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Please post back and let me know how it goes. I am supposing that the external will mount in Disk Utility.
Good luck.
cornelius

Similar Messages

  • WD MyBook Premium 320GB Firewire not recognized on my MBP?

    Hey guys,
    First off, thank you for the help anyone is willing to offer.
    Ok, so i have a MBP Intel Core Duo (1gb RAM) and use it to record music on. But basically, i have a WD MyBook Premium 320GB drive that works perfectly fine via USB. It powers up, mounts, and i can back anything i want on it. I formatted the drive to Mac Extended Journal format.
    I would like to use the firewire port though, just to keep my USB ports open. When i plug it via Firewire i get nada. I plug it in and power up the MBP and the drive doesnt power up, so i turn it on and it doesnt mount. Now, THis is the second one i have, i had the same one a few weeks ago and returned it for this one thinking the drive was defective but its obviously not. is there anyway to "turn on" or Fix this issue with the firewire not recognizing the drive?
    thanks alot for the help
    Macbook Pro 15" Intel Core Cuo   Mac OS X (10.4.9)  

    Ace King, in case you're still dealing with this I figured it out:
    I called tech support for an hour. First lady I talked to told me the firewire cable that was supplied with the drive is defective (she knew the problem right away). Tried my own cable but it still didn't work. She put me on to "Level 2"....ooooooh....now I'm getting somewhere? No, wait for 15 more minutes listening to terrible muzak...
    Anyways while I was waiting I thought I'd try my good cable in the other port on the drive and oila! So when the dude gets on the phone I ask him what the deal is...get this:
    "The faulty cable most likely fried the port." Wow...not only is the cable crap it actually destroys their product...someone must have lost their job for that one. Seems like sabotage almost...anyways, there you go. Return it and DO NOT use the cable supplied.
    Cheers!

  • IPhone not recognized by iTunes any more

    iTunes 9.0.2 on a 2006 iMac 2GHz intel duo running OSX 10.5.8
    iPhone 3Gs 32 gig
    iPod (5th gen)
    3 external hard drives, all the iTunes library stored on a Mybook 1 TB Firewire drive plugged into iMac direct, not via a Firewire hub.
    I plugged my iPhone into the Mac this am, tried to sync the iPhone and got an error message saying that something was wrong with my iTunes.
    Mac then froze.
    Finally got the Mac back up after five attempts (eventually, had to unplug everything, including the mains to the iMac, plug in just the power, keyboard and mouse, press and hold power switch for 5 secs then plug in each extra drive when the Mac came back up).
    Found something seriously wrong with iTunes as it wouldn't open when clicked on (Force Quit reported app frozen).
    Deleted iTunes using AppZap then downloaded iTunes from Apple website.
    iTunes now back up on iMac but can't find any of the music files (even when I carefully repoint the iTunes to the correct location for the iTunes library by iTunes/Preferences/Advanced then Change iTunes Media Folder Location). Each entry in the iTunes library now has a black exclamation mark against it,
    Also, iTunes doesn't see my iPhone when I plug it in.
    Also, when I plug in my iPod, get the error message "The iPod is synced with anotehr iTunes library. Do you want to erase this iPod and sync with this iTunes library?"
    HELP!
    By the way, I have TIME MACHINE running to a separate and dedicated HD. Can I not just "roll back" my iMac in the same way I could do with a PC, say selecting the iMac when it was last working fine (yesterday evening)??
    Keeping fingers crossed and hoping for an answer....
    Chris

    Rather than create another "iPhone not recognized by iTunes" thread, I'll add to this one. I have an iPhone 3G 8GB.
    After going through those steps you listed, my Windows XP installation always reverts back to the old Windows Apple iPhone drivers which only sees it as a camera. I've had it set to only pull from the iTunes drivers by specifying "Don't search, I will choose the driver to install" in the Hardware Update Wizard. Windows still doesn't like the iTunes drivers stating "the specified location does not contain information about your hardware". This location is the same as you noted: "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers" which contains:
    usbaapl.cat
    usbaapl.inf
    usbaapl.sys
    All dated 7/22/2008.
    My current drivers for the iPhone in my setup are still the MS drivers, version 5.1.2600.0.
    usbscan.sys
    ptpusb.dll
    ptpusd.dll
    Any help would be appreciated! Thanks!
    -Alex
    Message was edited by: Cassiux
    Message was edited by: Cassiux

  • External Hard Drive Not Recognized In Vista?

    I have a Western Digital MyBook hard drive, 500 GB. I have my Time Machine backups un there as well as my iTunes music.
    However, whenever I am in Vista, it never shows up in the Explorer.
    Why is this happening?

    I am new to mac but also have fusion. I have the western digital ext hard drive and a back up genie to back up my fusion pc side and a seperate simpletech 1 tb ext hard drive configured for my mac. I also have a shared drive that i can save from side to side. With all this said i sometimes have the issue of not recognizing the western digital in my fusion pc side. Then all of sudden hours or a day later it will be there. It is not formatted for mac. Help, how do i get it recognized all the time.

  • USB Device for IPOD not recognized by Windows, whether ipod connected or no

    During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
    When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
    I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
    I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
    Any suggestions?

    I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
    It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
    This is driving me up the wall. Is there a glitch with iTunes 7?
    Can anyone help me out?? Thanks
      Windows XP  

  • Aio Remote: PDFs not recognized by Google drive.

    Aio Remote on iPad Air2 iOS 8.1.1 - I created a PDF on my iPad from my HP Envy 7640 using Aio remote app. In the files/document section it's there (3 pages) as a PDF. But when I upload a copy from Aio Remote to Google Drive it's not recognized by Google Drive as a PDF even though it has a PDF extention. I have other PDF files stored in Google drive that are perfectly fine. It must be something in your app that is the problem.

    More info: if I send it from Aio remote as an email attachment to myself I get a PDF that I can upload to Google drive and Google drive reconizes it as a PDF. again proving it is Aio remote that is doing some thing wrong when uploading to Google Drive.

  • I recently upgraded to ios7 and now my PC is not recognizing my iphone

    I am having several problems.  I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone.  1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes."  How did it get locked and how do I unlock it without losing my data?  What do they mean by passcode?  I don't have a 4-number code to get into my iphone activated.  In fact, I've never had a passcode.
    2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone.  In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder). 
    3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com).  But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
    Why is this happening?  It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return.  But now essentially my iphone is not recognized when connected to my computer and this is very frustrating.  I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

    No problem!
    This will make it easy for you:
    http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

  • I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

    A new problem with CS5 forced me to download PScc but the problem is still there.  I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

    if i run this particular code
    ( SELECT
    AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
    AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
    AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
    FROM AccountDetails
    JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
    WHERE EXISTS
    ( SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    AND DebtEpisodes.DCASentDate IS NULL
    AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
    AND DebtEpisodes.DCAORLAWYER = 'DCA'
    This returns 1 row of data
    However if i run a small part of the above code...
    SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    It returns a lot of rows with a status of 2
    Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
    :(

  • IPod nano does not charge & is not recognized by computer or iTunes

    I have a 1st generation nano 1 GIG.
    It appears "dead."
    It is not recognized by My Computer, iTunes or the Ipod Updater (The updater asks that I connect the iPod, which I do). The iPod diagnostics through iTunes also reports that my iPod is not connected.
    I have tried my iPod on 4 different machines, with one of them having USB 2.0.
    I tried the following from Jeff Bryan. (I don't know if the links from his post have carried over into this post.) So I will list the things I have tried near the end of this post.
    - My iPod won't turn on.
    - iPod battery doesn't charge.
    - iTunes 7 doesn't recognize the iPod.
    - Your Windows PC doesn't recognize iPod.
    - iPod appears in Windows Explorer but does not appear in iTunes.
    - iPod does not appear in iTunes.
    - Fast user switching in Windows XP is not supported.
    I tried resetting my iPod by switching the Hold button on and off and then pressing Menu and the Select button for 6-10 seconds. I have done this over and over and over.
    I have uninstalled the latest iTunes, reboot, reinstall - same problem.
    I have stopped the iPod service, plugged in the iPod, but it isn't recognized by My Computer as stated in the Apple Do-It-Yourself Help. I launched iTunes - same problem.
    I used the window cleanup utility, reboot, reinstall iTunes, connect iPod - same problem.
    I have used the Windows ipconfig utility to change my boot parameters, but still nothing.
    If anyone has any ideas, I would greatly appreciate them.
    My iPod is just shy of 6 months.
    I do have a replacement contract with Best Buy - but I would like to cover all the bases before I succumb to defeat.
    Thanks
    XP Home with USB 1.1   Windows XP   4 machines, all XP, 2 XP Pro, 2 XP Home, 3 have USB 1.1, 1 has USB 2.0, 2 machines have latest iTune

    I'm having the same problem, my ipodnano is about a year old and I can't figure out what to do. I just installed the new itunes on my new laptop with vista premium. I'm desperate for a resolution, do you have any suggestions at all. Any help is greatly appreciated. Thank you

  • Iphone not recognized by windows or itunes

    Can anyone please help me figure out how to resolve this issue?  My iphone 4 is not recognized by my PC.  My OS is by Vista Home Premium Service Pack 2.  I tried the various "device not recognized" troubleshooting to no avail.  I tunes is up to date.  I even turned off my security sw for a bit to see if there was a third party conflict...all to no avail.  There has got to be someone out there who has the smarts to show me how to fix this.  Please advise and many thanks in advance!

    Jason,
    I understand why Apple doesn't cover the water damaged phones under the warranty, but do you know why they don't fix them if the customer is paying? Is it just because they want the people to buy another phone so they can make more money? I guess I just don't get it.
    The cost to repair a device and all of its components is more than the cost of a new device.
    Other than the article I linked above, this is the part of the warranty/legal forms that would apply:
    +"US v1.0+
    +Apple reserves the right to refuse+
    +service on products that have serial numbers altered, defaced or removed or that are damaged due to+
    +accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other+
    +than Apple or an Apple Authorized Service Provider), unauthorized modification, extreme environment+
    +(including extreme temperature or humidity), extreme physical or electrical stress or interference,+
    +fluctuation or surges of electrical power, lightning, static electricity, fire, acts of God or other external+
    +causes. In such event, Apple may return the product to you without servicing it, and may charge you the+
    +Diagnostic Fee."+ from http://images.apple.com/legal/terms/repair/docs/070108aiphoneOOW.pdf
    -Jason

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • How to reformat Ipod Nano 5th gen when not recognized by Windows or iTunes?

    I've done all the steps on the site to correct this problem up until the reformatiing part except I tried to update the driver software but Windows says that it encounters an error when trying to install the new software.
    So after going through the steps I noticed that the iPod I just bought was formatted for Mac. It says that in order for me to reformat, I have to restore my iPod in iTunes but since it isn't recognized my my computer or iTunes, I can't do it.
    Suggestions anyone?

    Hello there, HateKnuckle.
    The following Knowledge Base article offers a pretty thorough step-by-step for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPod Shuffle Not Recognized In Windows Or iTunes v7.0 - What Now?

    Hello everyone,
    I am having the same problem as many who have posted here. I have upgraded my software to iTunes v7.0.1.8. I also accepted the auto update for my iPod Shuffle - 512GB 1st Gen to v 1.44 (I believe). Of course, now my Shuffle is not recognized in iTunes and is only recognized in Windows for less than 5 seconds (as I have monitored it). I am listing below all of the actions I have taken today.
    As none of these have worked, my question is now what? Does anyone have any other suggestions before I take the dreaded step of calling support? Any help is appreciated.
    I am not happy with this upgrade issue at all. I expect much better from Apple.
    Steps Already Taken:
    1. Reset iPod.
    2. Set Terminal Services to "Manual" and restarted my laptop PC.
    3. Changed all USB Root Hub entries power management options to "Allow the computer to turn off this device to save power option" and rebooted.
    4. Assigned my external hard drive a different letter as it was assigned to "E" and tech support documentation suggested I changed it - I changed it to "M".
    5. I stopped the iPod Service via the Services and Application interface from My Computer/Manage, reattached the Shuffle, and started the iPod Service. The Shuffle was still not recognized.
    6. I uninstalled iTunes 7.0.1.8, the Apple Software update and QuickTime. I deleted all temp directories; program files folders and all possible traces of all three pieces of this software. I also deleted my iTunes library. I reinstalled all of this software and re-built my Library. NONE OF THIS WORKED!
    My 30GB Video iPod works fine and always has - it is only the shuffle for which I have this issue any only since the upgrade.
    What do I do now? If no one has another fix, I will be forced to call Tech Support after an experience with them over a year ago I would almost rather throw this thing away!

    qswh - I too cannot play the songs that are loaded on the shuffle. Additionally, I get a green & orange light when I plug it into a USB port and then I either get a blinking orange light or a solid orange light from there after.

  • Ipod touch not recognized by computer or ITunes

    Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • IPod not recognized by Windows or iTunes- Please Help!!!

    I have had my ipod mini since last summer and so far it has worked flawlessly. However, recently, when I connect my iPod to my computer, it does not charge and is not recognized as being plugged it at all.
    The iPod displays a battery icon although it does not move. I read on the site that this is because the battery is low and needs up to 30 minutes charging time for it to be recognized. However, I have had the iPod plugged in for much longer than this and it still is unrecognized.
    Also, every once and a while, the display shifts from the static battery icon into the APPPLE icon. Along with the icon, the iPod itself makes a strange mechanical noise. It sounds something like "doo-di-doo-di-doo-di" Then it displays the SAD IPOD icon with the apple.com/support/ipod website underneath, before starting the cycle over again.
    I have tried everything on the site, including putting it in disk mode (which didn't work).
    Is it perhaps an internal problem? I don't understand why a perfetly good ipod would stop working all of a sudden. It is still covered by the warranty it came with on purchase, so if it needs fixing, will apple fix it at no cost?
    Any help is appreciated!!
      Windows XP  

    If you have tried everything in these articles, then it needs service.
    iPod battery doesn't charge.
    Sad iPod icon.
    What does this picture on my iPod mean?
    PC doesn't recognize the iPod is connected.
    The sad iPod icon is usually indicative of a hard drive problem, and if under warranty will be repaired/replaced free of charge, although after 6 months of the warranty has expired there is a handling charge.

Maybe you are looking for