WD Scorpio WD3200BEKT compatible with MacBook Pro (Intel Core Duo)?

I'm looking at upgrading, and I was wondering if any one else here has used this drive. Thanks.
...Rene

I'm using the 5400 speed version of this HD (BEVT) and it's **** fine in my MBP.
I can do without the 7200 speed, and I guess I get a bit more battery life, which is more important to me.
Best thing is 320 Gig on the road all in one box.
Hope this is of some use.

Similar Messages

Power and battery problems with MacBook Pro intel core duo

Hi there, I've been having this problem for about a week now with my macbook pro where it shuts down a second after it's unplugged, even though the battery is full. I tested the power cord with another that works, and the same thing still happens. I've zapped the p-ram, and reset the MPU where you take out the battery and hold down the power button for 5 seconds and all that. I think it might be the logic board, or something within that? Any suggestions before I send it in to Apple for investigations?

I started having the same problem several days ago. Unplug the magsafe connector, and the MBP powers suddenly powers off, even though the battery shows a full charge on both the menu bar and the battery leds.
I decided to try a new battery after reading a number of posts here about the same problem.
Back to normal with the new battery. So now I'll go back to Apple to get the non-functioning battery replaced under AppleCare. (I wanted a second battery anyways)
Hope this helps.

Wireless N upgrade for Macbook pro Intel Core Duo (Purchased 8/2006)???

Firstly, I am a little angered that apple has not come out with any directly supported options to allow people with my macbook pro to upgrade to the new wireless N capability.
Therefore I have found a 3rd party option that is being offered by fastmac (http://fastmac.com/ncard.php) that will allow for wireless N wifi.
My only concern is if having this installed (professionally by them or by an authorized reseller, say compusa) would cause my entire applecare warranty to be voided or just the part that covers the wireless card. I could deal with having the wireless card voided as it would be under warranty by fast mac...
Macbook pro intel core duo Mac OS X (10.4.9)

Your warranty is not voided by installing the Airport card. However, any damage that may be caused by the installation of the card would not be covered under the warranty.
Secondly, the Airport Extreme card that supports 802.11n is available as an upgrade kit for Mac Pros. Some Apple dealers may be able to obtain and install the card for you in your computer.

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS?

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS? The Apple web says must have Intel Core 2 Duo. Please advise. Not knowledgeable enough to know if not having the 2 between Core and Duo is a stopper. Appreciate any guidance.

The difference between a Core Duo and a Core 2 Duo is a show stopper when it comes to running Lion. The Core Duo is still only a 32 bit chip, but the Core 2 Duo is a 64 bit chip. You need the 64 bit chip to run Lion.

Leopard not wanting to install on MacBook Pro Intel Core Duo?

I want to bump up to Leopard on my two main computers (MacBook Pro Intel, and a tower, also Intel)... but as I'm using them 24/7 on projects I dare not have problems with ... I don't want any down time getting Leopard to run seamlessly on those systems.
To this end, I 'borrowed' the Leopard disks from my son, for whom I just got a new iMac ... and was going to try it out on my spare (no critical projects) laptop (MacBook Pro Intel). At the beginning of the install the pop-up tells me it can't 'install Leopard on this computer'.
Could this just be some new security device to inhibit pirating? Related specifically to new iMacs? Or am I going to have problems when I try to install the Leopard I was about to buy to upgrade all my computers?
All ears,
B.

FYI, an OS installer doesn't just blindly install all the OS components it contains; among other things it runs "pre-flight" & "post-flight" scripts to make sure the Mac's hardware is compatible with that version of the OS, to assemble some of the pieces (like preference files) on-the-fly prior to installing them, & to initialize & clean up some of the items placed on the drive during the installation process.
If it helps, think of it as little mechanized factory that builds customized, turnkey products based on the measurements & specifications it obtains from the buyer.
The retail version of the OS contains the generalized version of this factory; the OEM disk sets do not, since they are intended for one model only.
So, if you want to "test drive" the OS, do it on your son's Mac. You won't be violating the license terms & your test will be much more indicative of what you will see with the OS properly installed on your Macs.

Will Macbook Pro Intel Core Duo run Snow Leopard ok?

I have the following system spec on my Macbook Pro which i bought in Apr 2006:
2.16 Ghz Intel Core Duo
2 G 667 Mhz SDRam
I would like to know if Snow Leopard will run on my system. I have been getting a few glitches for the last while when running internet related searches for certain sites like Youtube, and sometimes with streaming video. I figured that maybe i need a more up to date OS as i've been a bit slack with updating it. Any thoughts fromt he community are welcome

Yes. You can run Snow Leopard OK.
As you're starting from Tiger it's imperative you backup your current system before proceeding. That's best done by cloning it to an external HD using the Restore function in Disk Utility, or you can use third-party software such as CarbonCopyCloner or SuperDuper.
The reason for this is that although the installation should go smoothly with the installer replacing system files and leaving your user data and applications untouched, I have come across a couple that failed and could only be installed after erasing the Macintosh HD.
Buy the retail Snow Leopard disc; http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
and update to 10.6.8 with the combo installer; http://support.apple.com/kb/DL1399
Be aware that lots of software will need updating, not all of it for free (stand up, Adobe!), and you may well have difficulty getting drivers for older printers or scanners.
Ensure you select Rosetta from the optional installations to enable your older software to continue working.

MacBook Pro Intel Core Duo

I have a MacBook Pro running OSX 10.6.8 with an Intel Core Duo processor.
Is it true that I wont be able to upgrade to Lion when it is released?
My MBP isn't that old so why have Apple decided not to support it?
Any advice would be appreciated!
Thanks

Sadly it's true
Your Mac must have an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor to run Lion.
http://www.apple.com/macosx/how-to-buy/
The Core Duo processor was last used in a MacBook Pro in Mid-2006.
After that with the release of the Late-2006 MBPs the Core 2 Duo processor was used.
http://support.apple.com/specs/#macbookpro
So, it's 5 years old...
Personally I think Apple has abandoned the Core Duo because it is only a 32-bit processor and not capable of 64-bit.

Can you tell me if this hard drive is compatible with MacBook Pros Intel

Looking to upgrade my MacBookPro to a higher capacity drive. Is this drive compatible with it?
http://macworld.pricegrabber.com/searchtechspecs_full.php/masterid=43232780/st=producttab

I don't think a 1TB drive will be available to you. Check this web site for drives and how to's:
http://www.ifixit.com/Products/MacBook-Pro-15-Inch-2-4-GHz-Hard-Drives/7/110

Macbook Pro intel core duo, will not boot to anything.

Greetings, I am currently having issues with my MacBook Pro. I get the flashing folder with the ?, but I can't boot to any of the startup utilities. I have tried all that I have read about on other posts, such as, trying to boot with the C key held down (it just gets to the folder ?), booting to disk utility didn't work ( held down keys and it went to the folder ?), I also tried getting to the hardware test, by holding D and having the applications disk in. And still everything I try gets me to the flashing folder ?. Also I do have the CD's that came with the laptop and tried to install from the mas os install CD and still get to the flashing folder ?. The reason it started doing this was because of this...... I had boot camp installed and was running dual boot with windows 7, then I had deleted the mac osx on the drive so I would only be using windows 7. I wanted to reformat the drive after this, but had a hard time finding out a way to actually do this, as the MacBook unlike PC's, doesn't have any BIOS, and at that time didn't know all the key commands to use at startup. So I downloaded a program from the net that can run at windows start and delete the HD before the computer fully boots windows 7. So after I deleted the HD I could not install any program or start any of the mac utilities at startup, and I did the PRAM reset, still everything that I try it gets me to the flashing folder ?, in the end. Could I have deleted all of the startup utilities when I wiped the HD? If so how can I get these back on my MacBook pro if I can't get the MacBook pro to read any files or start up utilities? Any help would be greatly appreciated.

UPDATE: I found a way to download firmware, I thought that it could be the reason I get the flashing folder with ?, because maybe I somehow damaged the firmware on my computer when I did the reformat. Alas I followed the directions to re-install the firmware and still I get to the same flashing folder. I used FirmwareRestorationCD1.4 I think it is the one I needed for my model, MacBook Pro 15" intel core 2 duo, and comes with osx 10.5 leopard I think, the OSX CD is stamped 2008 for 15" MacBook Pro. I can't check the properties of my MacBook because it has no programs on it, but this is what I think it is from memory and deduction. Well now I guess I have to ask the question, is the firmware the programs installed such as disk utility, and recovery mode? I need to read more I guess, and also I thought I needed to take the 1.4 off the end of the FirmwareRestorationCD in order for it to work, but the instructions for making and using the firmware CD is a bit vague. Another factor in this to make things more difficult, is that this computer is my second computer and it's a PC laptop, so I used a program download from the net to write .dmg files to disk, it's called Transmac, could this be another fault in my creation of the CD? I am out of ideas again as to what I need to do to get mac OSX back on my computer, I am still a bit new to the way macs work, so I could definatley use some advice. thanks.

Trying to install downloaded Leopard on my macbook pro intel core duo

I purchased Leopard from a third party site in which it was downloaded. I'm wondering if I can install it on my Macbook Pro? Everytime I open it is says to restart in order to install but it takes me back to my desktop everytime. The only reason I'm upgrading is because I purchased some photoshop extras and in order to utilize them I need 10.5 or 10.6. I don't want to upgrade to 10.6 and I'm not quite sure if I can.

To elaborate on William's point above about the software likely being pirated: Apple never, ever sells "downloadable" versions of its software. (Updates are provided via download, but full releases are available on DVD media only.) No reseller should be offering such a download for sale.
Plus, you cannot install a Mac OS onto a hard disk that is the boot drive for that computer. So if you downloaded a version of OS 10.5 onto your Tiger (10.4) computer, you could not run the installer. A running system can't upgrade itself. That's why you must have the software on DVD and boot from that DVD. (There are other ways--sharing DVDs across a wireless network or booting from an external drive.)
For now, call Apple sales (1 800 MY APPLE in the US) and purchase a legal, on-DVD copy of OS 10.5--they are still making and selling them.

Esata and older macbook pro intel core duo 2.16 GHz

Hi. I'm sure this has been discussed elsewhere, but I can't locate a thread. To connect an external ESATA HD to my Macbook pro, is some kind of card needed, or does the laptop have an esata connector inside that can be accessed?
Thanks in advance....

"I can't locate a thread." Here's a starting point.
And, yes, you need a card. There's no extra connection internally.

My macbook pro intel core duo 2 keeps restarting intermittenly. Help with error code.

I have run a Hardware Test, and it gives the follwing error code. Can anyone tell me what this is? I recently had my logic board replaced within the last 3 months, so it shouldn't be a problem there.
Thank you very much for any and all help.
Error code:
4SNS/I/40000000:TGOH-128.00

Online references possible memory issue? Sensors?
https://discussions.apple.com/thread/3140607?start=0&tstart=0
Keep taking it back and they keep switching parts until the problem is gone.

My Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?

my Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?
Toyoo

These are some of the most common Questions (Q) and Answers (A) about Lion:
Q: What are the system requirements of the Lion upgrade?
A: Core2Duo, Core i3, i5, i7, and Xeon Intel CPUs with 2 GB of RAM in a Macintosh computer with 2 GB of RAM, and 4 GB (7 GB after installed) for downloading from the Mac App Store (Available in 10.6.6 and later). Unofficially, past upgrades have arbitrarily also required an additional 15% of the hard drive to be free for data.
Q: What applications are compatible with Lion?
A: http://roaringapps.com/apps:table provides a nice third party editable listing for people to include the compatible applications. Many of these compatibility entries came from before Lion's release. Please verify they are correct now that it has been released, and help edit it for more accurate data. Be sure to include any update version of Lion post release that you have found is or is not compatible with it, for the help of others who may be upgrading to Lion the first time. Additionally, as it was released, there is no Rosetta. This means any application that is stated to be PowerPC in the System Profiler, will not work with Lion, and needs a comparable application or upgrade to be compatible. The System Profiler is in Apple menu -> About This Mac -> More Info. Intel and Universal applications are on the whole supported, though may still need some tweaking before every feature is compatible.
Q: Are there any pitfalls to watch out for?
A: With all upgrades, backing up your data at least twice has been a given. Hardware can fail independently of downloads and upgrades, though may happen simultaneously. Software may be found to be incompatible that has not been tested with the new upgrade, or combination of other software that might be installed with the upgrade. It is also strongly recommended once your backup is complete, to shut down your computer, remove all but Apple wired keyboard and mouse (notebooks remove all input devices). Then once done, reboot, and go directly to the upgrade distribution system available. Third party system tools, modification, and "maintenance" applications should be verified as compatible, or removed until known to be compatible. Check with developers how to remove if it is essential to use Lion before those applications become compatible. Most "maintenance" tools that deal with system cache, prebinding, are not really maintenance tools. Ask on forum when are the appropriate times to use them before assuming they should be used for upgrades or otherwise.
Q: How can I get from 10.4 or 10.5 to 10.6.6?
A: Purchase a 10.6 retail installer from an Apple retail or third party reseller. It has a picture of a Snow Leopard on the DVD, and does not say Upgrade, Dropin, or OEM. Install it, and then install the 10.6.6 combo update from:
http://support.apple.com/kb/DL1349
Q: Is it true that I can only get it from the Mac App Store?
A: Presently this truth is based on current documentation as of the writing of this article. It may change, but we can't speculate as to its change. It has a better chance of changing if users request something different at:
http://www.apple.com/feedback/macosx.html
Q: What limitations might one encounter if it doesn't change?
A: First off the 7 GB space limitation on the hard disc after it is installed. Secondly, the size of the download file requires significant time, unless you have a high speed broadband connection. Times expected are below -
4 GB at:
5Mbps is 2 hours.
at 1 Mbps is 10 hours.
at 384 kbps is 27 hours.
at 56k kbps is 184 hours (nearly 8 days).
If you include the 10.6.6 combo update of 1.06 GB
add 29 minutes for 5 Mbps
145 minutes (2 and 25 minutes) for 1 Mbps
6 and a half hours for 384kbps
A 24 hour day and 15 hours (for a total of a minimum of 39 hours) for 56kbps
Remember the retail 10.6 currently does not include the App Store, and those upgrading from 10.5.8 or earlier will need to both buy the retail 10.6, and download the combo 10.6.6 update, not to mention ensure they have the correct processor and 2 GB of RAM. Finally once it is available, you'll have find out how long approximately it takes to install after the download is complete.
These times do not include installation time, which on a MacBook Pro 3,1 15" installing on a Firewire 800 Newertech Voyager with WD10ACS-322J80 drive, 10.6.7, took 1 hour and a half to complete the installation from double clicking the install command to the registration screen. These times may vary by connection speeds from a non-dedicated connection, or background application usage of the internet. Any applications running when the installation process begins might interfere with the installation itself, and they should be quit first.
The installer just before it starts has in its package contents an InstallESD.dmg file a DVD burnable image to install on additional computers in the home without downloading over again. So if you desire to reinstall without an extra internet download, extract that file, by selecting the installer in the dock, and control-clicking it, and revealing it in the Finder. Next Control-mouse click it, and select show package contents. Inside that folder is a Shared Support folder. That's where you find the DMG.
Q: If I purchased a Mac recently, can I get it cheaper?
A: Yes, visit http://www.apple.com/macosx/uptodate/ for details.
Q: When will Lion become available?
A: It became available July 20, 2011.
Q: Which Macs can run Lion?
A: Look at Apple menu -> About This Mac -> More Info, and see if you meet the Machine ID and RAM requires under the hardware. 2 GB is required for all These Machine IDs will run Lion:
Mac Mini 2,1 and later
MacBook 2,1 and later.
iMac 5,1 and later.
All MacBook Air.
MacBook Pro 2,1 and later
All MacPros.
The Macs with the Machine IDs below will not run Lion (x can be any number):
Mac Mini 1,x or PowerMac x,x
MacBook 1,x
MacBook Pro 1,x
iMac 4,x, 3,x, 2,x, 1,x
Authored by a brody

Is the latest 280.26 nvidia driver compatible with MacBook Pro 6,2 model?

Is the latest nvidia driver (280.26) compatible with MacBook Pro 6,2 model)? Boot Camp 4.0 comes with the 262.41 nvidia driver, but I'd like to upgrade to the latest 280.26. The official 280.26 driver page on the nvidia site says that GeForce GT 330M is compatible, but in the footnote is written this thing:
Notebooks supporting Hybrid Power technology with Intel chipsets are not supported by this release
Do you think this is the case of MacBook Pro 6,2 model? Can I upgrade the driver without any problem?
P.S.
I've the nvidia geforce gt 330m 256 MB.

Mac OS X 10.8.2.
(77868)

External hard drive compatible with macbook pro 10.5.8

external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

You can buy just about any USB2.0 hard drive and use it with your MacBook Pro. Many older external drives come pre-partitioned and formatted FAT32 for use on Windows. Your Mac can use that file system as well, but it has limitations on file sizes. You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine. One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

WD Scorpio WD3200BEKT compatible with MacBook Pro (Intel Core Duo)?

Similar Messages

Maybe you are looking for