Wdf01000.sys BSOD on shutdown after imaging

We have SCCM 2012 R2 and Dell. Using the latest combo drivers on Dell, imaging Win7 x86/x64.
I've been seeing BSOD on shutdown on almost all desktops/laptops. They don't BSOD every time, maybe 20-30% of the time on 5-10% of all desktops/laptops.
Dump is below.
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\katiecc\Downloads\e7440_111214-8330-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`0305f000 PsLoadedModuleList = 0xfffff800`032a2890
Debug session time: Wed Nov 12 13:49:33.070 2014 (UTC - 8:00)
System Uptime: 0 days 0:07:08.907
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff88000ec6cce, fffff8800a993308, fffff8800a992b60}
*** WARNING: Unable to verify timestamp for TeeDriverx64.sys
*** ERROR: Module load completed but symbols could not be loaded for TeeDriverx64.sys
Probably caused by : TeeDriverx64.sys ( TeeDriverx64+fc0d )
Followup: MachineOwner
3: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff88000ec6cce, The address that the exception occurred at
Arg3: fffff8800a993308, Exception Record Address
Arg4: fffff8800a992b60, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
Wdf01000!FxIoQueue::CancelForQueue+252
fffff880`00ec6cce 4c897038 mov qword ptr [rax+38h],r14
EXCEPTION_RECORD: fffff8800a993308 -- (.exr 0xfffff8800a993308)
ExceptionAddress: fffff88000ec6cce (Wdf01000!FxIoQueue::CancelForQueue+0x0000000000000252)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000001
Parameter[1]: 0000000000000038
Attempt to write to address 0000000000000038
CONTEXT: fffff8800a992b60 -- (.cxr 0xfffff8800a992b60;r)
rax=0000000000000000 rbx=fffffa800cb2de50 rcx=fffffa80109c1500
rdx=0000000075657500 rsi=0000000000000000 rdi=fffffa80109c14a0
rip=fffff88000ec6cce rsp=fffff8800a993540 rbp=fffffa8010a59d30
r8=0000000000001000 r9=fffff88000e45160 r10=000000000000000c
r11=0000000000000000 r12=fffff88000edad40 r13=0000000000000301
r14=0000000000000000 r15=0000000000000001
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
Wdf01000!FxIoQueue::CancelForQueue+0x252:
fffff880`00ec6cce 4c897038 mov qword ptr [rax+38h],r14 ds:002b:00000000`00000038=????????????????
Last set context:
rax=0000000000000000 rbx=fffffa800cb2de50 rcx=fffffa80109c1500
rdx=0000000075657500 rsi=0000000000000000 rdi=fffffa80109c14a0
rip=fffff88000ec6cce rsp=fffff8800a993540 rbp=fffffa8010a59d30
r8=0000000000001000 r9=fffff88000e45160 r10=000000000000000c
r11=0000000000000000 r12=fffff88000edad40 r13=0000000000000301
r14=0000000000000000 r15=0000000000000001
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
Wdf01000!FxIoQueue::CancelForQueue+0x252:
fffff880`00ec6cce 4c897038 mov qword ptr [rax+38h],r14 ds:002b:00000000`00000038=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000001
EXCEPTION_PARAMETER2: 0000000000000038
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8000330c100
GetUlongFromAddress: unable to read from fffff8000330c1c0
0000000000000038 Nonpaged pool
FOLLOWUP_IP:
TeeDriverx64+fc0d
fffff880`05117c0d ?? ???
BUGCHECK_STR: 0x7E
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff88000ec665b to fffff88000ec6cce
STACK_TEXT:
fffff880`0a993540 fffff880`00ec665b : fffffa80`109c14a0 fffff880`0a993600 00000000`00000000 fffffa80`109c14a0 : Wdf01000!FxIoQueue::CancelForQueue+0x252
fffff880`0a9935b0 fffff880`00eb33d3 : 00000000`00000000 fffffa80`109c14a0 0000057f`ef63eb58 00000000`00001003 : Wdf01000!FxIoQueue::QueuePurge+0x28f
fffff880`0a993630 fffff880`05117c0d : fffffa80`109c14a0 fffffa80`109912d0 fffff880`0511c028 fffff880`0511c028 : Wdf01000!imp_WdfIoQueuePurge+0x10b
fffff880`0a993690 fffffa80`109c14a0 : fffffa80`109912d0 fffff880`0511c028 fffff880`0511c028 fffffa80`109901e0 : TeeDriverx64+0xfc0d
fffff880`0a993698 fffffa80`109912d0 : fffff880`0511c028 fffff880`0511c028 fffffa80`109901e0 fffff880`00e64e1a : 0xfffffa80`109c14a0
fffff880`0a9936a0 fffff880`0511c028 : fffff880`0511c028 fffffa80`109901e0 fffff880`00e64e1a fffffa80`109912d0 : 0xfffffa80`109912d0
fffff880`0a9936a8 fffff880`0511c028 : fffffa80`109901e0 fffff880`00e64e1a fffffa80`109912d0 fffff880`0510f0d8 : TeeDriverx64+0x14028
fffff880`0a9936b0 fffffa80`109901e0 : fffff880`00e64e1a fffffa80`109912d0 fffff880`0510f0d8 fffffa80`109912d0 : TeeDriverx64+0x14028
fffff880`0a9936b8 fffff880`00e64e1a : fffffa80`109912d0 fffff880`0510f0d8 fffffa80`109912d0 00000000`00000000 : 0xfffffa80`109901e0
fffff880`0a9936c0 fffff880`00e58288 : fffffa80`109901e0 00000000`00000000 00000000`00000005 fffff880`0a9937d8 : Wdf01000!FxPkgPnp::NotifyResourceObjectsDx+0x4a
fffff880`0a993730 fffff880`00e64e99 : 00000000`00000000 fffff880`0a9938b0 fffff880`00edb200 fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerGotoDxIoStopped+0x120
fffff880`0a993780 fffff880`00e5b0f8 : 00000000`0000031c fffff880`0a9938b0 00000000`ffff7fff fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerGotoDNotZeroIoStopped+0x9
fffff880`0a9937b0 fffff880`00e5ada6 : fffff880`00edb1c0 fffffa80`10990398 fffffa80`109901e0 fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerEnterNewState+0x1d8
fffff880`0a993910 fffff880`00e5b627 : 00000000`00000000 fffff880`0a9939f0 fffffa80`10990380 fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerProcessEventInner+0x13e
fffff880`0a993980 fffff880`00e65dd3 : 00000000`00000000 fffffa80`109901e0 00000000`00000000 00000000`00000000 : Wdf01000!FxPkgPnp::PowerProcessEvent+0x1b3
fffff880`0a993a20 fffff880`00e476f2 : 00000000`00000002 0000057f`ef66efd8 fffffa80`109a8bb0 fffffa80`12b46402 : Wdf01000!FxPkgFdo::DispatchDeviceSetPower+0x117
fffff880`0a993a70 fffff880`00e4679a : fffffa80`12b46410 fffffa80`12b46410 fffffa80`12b46410 00000000`00000000 : Wdf01000!FxPkgPnp::Dispatch+0x2aa
fffff880`0a993ad0 fffff880`00e46866 : fffffa80`12b46410 00000000`00000000 fffffa80`109a8bb0 fffffa80`109a8bb0 : Wdf01000!FxDevice::Dispatch+0x19a
fffff880`0a993b10 fffff800`031f0eb5 : 00000000`00000001 00000000`00000000 fffffa80`109a8bb0 fffffa80`12b464b8 : Wdf01000!FxDevice::DispatchWithLock+0xa6
fffff880`0a993b50 fffff800`0337073a : ffffffff`fa0a1f00 fffffa80`1235ab50 00000000`00000080 fffff8a0`00000002 : nt!PopIrpWorker+0x3c5
fffff880`0a993c00 fffff800`030c58e6 : fffff800`0324fe80 fffffa80`1235ab50 fffffa80`13004b50 fffffa80`13b9f010 : nt!PspSystemThreadStartup+0x5a
fffff880`0a993c40 00000000`00000000 : fffff880`0a994000 fffff880`0a98e000 fffff880`0a9932e0 00000000`00000000 : nt!KxStartSystemThread+0x16
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: TeeDriverx64+fc0d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: TeeDriverx64
IMAGE_NAME: TeeDriverx64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51d31e10
STACK_COMMAND: .cxr 0xfffff8800a992b60 ; kb
FAILURE_BUCKET_ID: X64_0x7E_TeeDriverx64+fc0d
BUCKET_ID: X64_0x7E_TeeDriverx64+fc0d
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x7e_teedriverx64+fc0d
FAILURE_ID_HASH: {c079e5d7-83f0-230c-5936-8e6123aa32cd}
Followup: MachineOwner

Hi,
>> *** WARNING: Unable to verify timestamp for TeeDriverx64.sys
>> *** ERROR: Module load completed but symbols could not be loaded for TeeDriverx64.sys
>> Probably caused by : TeeDriverx64.sys ( TeeDriverx64+fc0d )
I suspect the BSOD is caused by Intel(R) Management Engine Interface (c:\windows\system32\drivers\teedriverx64.sys).
Uninstall it and make sure TeeDriverx64.sys is deleted.
Restart machine several times.
After restart, windows will auto configure the appropriate native system driver.
Reference:
Please help keep getting BSOD aiming to wdf01000.sys error
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/please-help-keep-getting-bsod-aiming-to/1e5f7c9b-1dd3-4423-8dfb-37d4b37b995a
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Adobe Premier Pro CC Crashes PC with error DRIVER_IRQL_NOT_LESS_OR_EQUAL (wdf01000.sys)

i am a gamer on youtube and i use my all the time i recently did a full system upgrade exceot the ram and hardrive it working fine but then the harddrive became faulty and premier pro cc allways crashed when i opened it so i put a new 120gb ssd in installed
a new version of windows did all the driver updates and it worked fine untill i closed premier pro now im back to it crashes every time i open it and it crashes my pc i allways get this error message DRIVER_IRQL_NOT_LESS_OR_EQUAL (wdf01000.sys)
could someone please help because i really need my pc working again and i hate using my mac

Thanks.
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.
2: kd> .trap 0xffffd000fe1dc280
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=00000000c0000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80031ca470a rsp=ffffd000fe1dc410 rbp=00000000c0000001
r8=00000000c0000001 r9=0000000000000000 r10=0000000000000038
r11=ffffd000fe1dc4c0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
Wdf01000!FxRequest::CompleteInternal+0x4a:
fffff800`31ca470a 488b91b8000000 mov rdx,qword ptr [rcx+0B8h] ds:00000000`000000b8=????????????????
On the faulting instruction, there was a failure writing the contents of the
rdx register into the memory address pointed at by the sum of the
rcx register + 0B8h. This was brought upon by USBXHCI.sys.
1. Remove and replace avast! with Windows 8's built-in Windows Defender for temporary troubleshooting purposes as it's likely causing conflicts:
avast! removal -
http://www.avast.com/uninstall-utility
Windows Defender (how to turn on after removal)
A.
Navigate toControl Panel
(with icons). You can do this by hittingStart
> Search > Control Panel.
Once in Control Panel,
change the drop-down fromCategory
to
Large
and/or Small icons.
B.
Among the list of icons, find and click
Action Center.
C.
Assuming the removal of your prior antivirus software went properly, you will notice for both
Spyware and unwated software protection (important) and
Virus protection (important), it'll have a button labeled Turn on now. Click this button (it doesn't matter which, as Windows Defender serves as
both in Windows 8/8.1).
2. I am curious in regards to whether or not your Avstream drivers are causing a problem, as they are rather old:
2: kd> lmvm ElgatoGC658
start end module name
fffff800`34492000 fffff800`344a1000 ElgatoGC658 (deferred)
Image path: \SystemRoot\System32\Drivers\ElgatoGC658.sys
Image name: ElgatoGC658.sys
Timestamp: Wed Nov 09 02:39:12 2011
I would uninstall if no update is available.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

HP Pavilion DV6; Black Screen & Atikmpag.sys BSOD with external Monitor

Hello Guys.
I have HP Pavilion DV6 Core i7 with ATI Mobility Radeon HD 5650 Graphics Card. Two weeks ago, I started getting continous Atikmpag,sys BSODs. The operating system also started giving me warnings about the hardrive. After a few days, the BSODs got more frequent. Then one day, I was doing normal stuff on my PC and the Display Driver crashed. Instead of recovering, the PC froze. I forced restart my PC but it got worse. The display of my laptop went black. I connected the laptop to external monitor which detected the display. When I tried to load the windows, it started giving me the Atikmpag.sys BSOD on the start up. Now the operating system works fine in the Safe Mode but with nothing on the laptop's screen. The soultions I have tried so far are.
-Reinstalled the windows thrice
-Removed the drivers and installed the updated ones a bunch of times.
-Rolled back the bios to an earlier version
-Removed the hardrive and tried to load it from an operating system installed on external flash drive
-Tried loading the PC with linux on external flash drive
-Opened the laptop and cleaned it thoroughly
-Removed all the components and plugged them one by one.
-Removed the old Atikmpag.sys in system32 folder and expanded it with the latest ones.
-Installed every thing fresh from HP website
None of these tricks have given me any luck yet. The only way, I could use the operating system in normal mode, is to delete the atikmpag.sys file in safe mode and then log on back in normal mode. I also analysed the minidump file through window debugger and it says that atikmpag.sys is causing this crash with the TDR message. I did all these with an external monitor as the display of the laptop is black since that day.
Below are the detailed specs of my laptop.
OS Name: Microsoft Windows 7 (64 bit) Home Premium
Version: 6.1.7601
System Model: HP Pavilion Dv6 Notebook PC
Processor: Intel Core i7 Q 721 @ 1.60 GHz
Bios Version/Date: Hewlett- Packard F.29, 11/7/2011
Installed Physical Memory (RAM): 6GB
Graphics Card: ATI Mobility Radeon HD 5650 1 GB
I have tried almost every solution available on these forums but still have not gotten any where. I am wondering how could the display, graphics card and hard drive stop working at the same time .
I would really appreciate if someone colud help me through this problem.
Thank you
P.S. Kindly ignore my English mistakes as it is not my first language.

Hi Goloono,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
First I would like to reassure you your English was great, I had no problems understanding you.
I grasp that you are getting a black screen with the error message " Atikmpag.sys".
Here is a link to Troubleshooting Error Messages on a Black Screen that may Occur During Startup or Boot.
Have you run The HP Support Assistant to help with updates and resolving issues.
Here is a link to a Microsoft Community Page with this exact issue. There are some suggestions that may help.
Blue Screen error with atikmpag.sys in Windows 7 .
Here is a link to the HP software and driver page. You will need to input your exact model of DV6 you have and follow the prompts. This page will have the recommended drivers and it will list bios updates. if there are any applicable ones.
HP Drivers & Downloads.
How Do I Find My Model Number or Product Number?
At one point you state you had a hard drive error, to rule that out I would run a diagnostics. SMART Media Test Error Appears when Notebook is Started
Please let me know if this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

"Unexpected Kernel Mode Trap (Wdf01000.sys)" and a Blue Screen appearing frequently on my Windows 8.1 (64-bit) laptop and laptop restarting all of a sudden.

Hi I am Arka Dey. I am using a
Windows 8.1 64-bit single language Dell laptop. Recently I have installed an update to my Windows 8.1 (X-64) operating system from the "Windows Update" available in the "Control Panel" section of my laptop.
But from that very day when I installed the updates, my laptop started behaving weird sometimes.
The problem is while I am using my laptop, a
blue screen suddenly appears and it says, " Your PC has run into a problem and needs to be restarted." Along with it there is
written the following message: " You can later search for this online - Unexpected Kernel Mode Trap (Wdf01000.sys)".
After displaying this for a few seconds in the blue screen mode, my
laptop automatically restarts. This has been happening for sometime for the past few weeks. I do not understand the meaning of the message displayed in the blue screen and nor do I know the reason behind its occurrence. Please help me with
a solution to this irritating problem as I am not a student of computer related sciences and software technologies. Neither am I that tech savvy. So please do help me with a guide or set of instructions to solve this problem of mine. The detailed specifications
of my laptop are given as follows:-
System Information
OS Name Microsoft Windows 8.1 Single Language
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DELL
System Manufacturer Dell Inc.
System Model Inspiron 5521
System Type x64-based PC
System SKU Inspiron 5521
Processor Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A11, 29-08-2013
SMBIOS Version 2.7
Embedded Controller Version 1.01
BIOS Mode UEFI
BaseBoard Manufacturer Dell Inc.
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State On
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale India
Hardware Abstraction Layer Version = "6.3.9600.17031"
User Name DELL\Arka Dey
Time Zone India Standard Time
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.88 GB
Available Physical Memory 5.08 GB
Total Virtual Memory 15.9 GB
Available Virtual Memory 12.6 GB
Page File Space 8.00 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection Yes
N.B. : If you need more specifications about hardwares then I can send them to you in later messages. Please help me.

Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag

Igdpmd64.sys BSOD on HP ProBook 4530s Windows 7 64-bit

I used my HP ProBook 4530s with Windows 7 64-bit and Internet Explorer 8 (IE8) installed since 2011 with no issues.
Recently I updated Windows to SP1 and IE10. All works well except one thing.
When I run IE10, open few tabs and hoover my mouse over IE10 icon so that it shows the half-transparent small windows my PC crashes.
It shows blue screen with PAGE_FAULT_IN_NONPAGED_AREA message caused by igdpmd64.sys driver.
1) I found at HP forum the post "igdpmd64.sys BSOD on HP Envy14t".
I followed the recommendation to uninstall KB2670838.
However after rebooting PC the IE10 disappeared and IE8 came back to life.
I updated then Windows trying to block the KB2670838 installation but it was impossible since KB2670838 was not shown at the list but somehow "installed in the background".
So I was back to the point "all works well except one thing".
2) I found another forum post which recommended to upgrade the igdpmd64.sys driver.
I went to: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058
Chose: Drivers - Graphics (3)
Downloaded the newest Intel Graphics Kernel Mode Driver 8.15.10.2559 from 2012-02-22
However during the installation process I received a message (2a):
"This computer does not meet the minimum requirements for installing the software".
I called HP support who advised to install the previous version of the driver.
I did it but received the same message (2a)
I called HP support again who advised to install the driver from the Intel page.
3) I went to: https://downloadcenter.intel.com/search?keyword=Intel%c2%ae+Q45+Express+Chipset
Downloaded: Intel® Graphics Media Accelerator Driver, Windows 7* 64, Windows Vista* 64 (exe)
graphics driver version 15.17.19.64.2869 (8.15.10.2869) for Intel® integrated graphics.
However during the installation process I received a message (2a).
I have no more ideas. Could anybody help me please ?
Best Regards,
Sylwek
This question was solved.
View Solution.

I know it's weird that I reply to myself.
HP support advised me to install the ATI Video Driver and Control Panel
at:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5060881&swItemId=ob_101995_1&swEnvOid=405...
It helped :-)
Thank you HP support Poland

T500, T510, T520 apsx86.sys BSODs

Hey,
I work with Lenovo Machines at my university, and we have been getting many apsx86.sys BSODs (0x000000F7 error codes). A quick Google search told me that it's something to do with ThinkVantage Active Protection Service. Our current solution is to reimage the machine(s) and the user will have no more issues.
From what I've personally dealt with, The T520's BSOD as soon as windows loads up, same apsx86.sys BSOD and F7 error code. The T510's and 500's don't seem to BSOD during boot, but rather a couple minutes after logging in. We haven't had any issues with our x200, x201 or x220 tablets.
How can we prevent this BSOD, and is it possible to fix? (Computers do -not- boot in safemode either).
Thanks.

Sorry for the delay, I should have specified.
We are using Windows 7 32bit
I checked the Thinkvantage Active Protection System, and the working computers are on version 171. I do not know if it is updating to 1.74 and causing this issue as I do not have a test computer right now.
We do not use any encryption software, as they are computers for only students and faculty. I have a x201 Tablet, with a fully encrypted HDD using TrueCrypt. I am on Windows 7 64bit and running version ThinkVantage APS 1.71 No issues with my computer. I will update to 1.75 as soon as I backup some documents. I need a reason to format again anyway. =).
I'll get a kernel dump as soon as I find a client who is experiencing this issue, or if I can replicate it on a test machine. For now, I do not have access to either. I will ask the asset department for a couple test machines (one of each of the T500 series) tomorrow, as they close in 30 minutes.
Thank you for the assistance someotherguy.

Before , after images not populating in cube

Hi All,
we have a data flow wherein the data from the dso is extracted delta wise to cube . Now for a particulat document , the doc did come to ods and then to cube . then in r/3 there a change to the document , this was then again extracted to ods and then to cube . now the problem is
the cube is showing both the values of before change and after change in the cube . I checked in the ODS only one record of changed value is there. in the change log after, before and new images for the doc no is there but in the cube the data is doubling up intead of showing th latest.
Any idea why this is happening.
Does compression play any part.
some more info to understand better:-
in cube already KF1 = 100 , ch1 = 'a' ch2 = 'b'.
sam in ods KF1 = 100 , ch1 = 'a' ch2 = 'b'.
now in r/3 change ch1 from 'a' to 'n'.
so in ods KF1 = 100 , ch1 = 'n' ch2 = 'b'.
in change log table
KF1 = 100 , ch1 = 'a' ch2 = 'b'   record mode = n
KF1 = -100 , ch1 = 'a' ch2 = 'b'. record mode = b
KF1 = 100 , ch1 = 'n' ch2 = 'b'. record mode = (after image)
now in cube
KF1 = 100 , ch1 = 'a' ch2 = 'b'
KF1 = 100 , ch1 = 'n' ch2 = 'b'
SO the key figures are adding up , which should not be the case.
Regards,
Sushmita
Edited by: sushmita das on Apr 14, 2011 7:36 AM
Edited by: sushmita das on Apr 14, 2011 11:11 AM

Hi Sushmita,
In ODS only if the key fields are same, then any change in Data Fields will be overwritten. And the new record will be updated to the cube.In cube data is not overwritten instead it is added or updated.
For eg:
DSO
Key field   Data Field
A                 100
B
C
So initially in cube also these values will be there.
Now suppose keeping all the Key Fields same, the data field is changed to 200 in R/3. So in DSO an after image will come and u will see that in the change log table there are 3 records, one will 100, another will be -100 and another will be 200.
But when u take that data into cube the data field value will be added up to 300.
However if Key field value 'A' is changed to 'D' in R/3 then in cube there will be 2 records
One having Key fields as A B C and Data Field as 100
Another having Key Field as D B C and Data Field as 100.
If you want to delete the first request from cube and only update the new record then you will have to delete contents of the cube and freshly load it.
Hope it helped.

Problems with random shutdown after replacing a swollen battery

Hello all,
Perhaps one of you can help with this issue.
I'm using a Macbook Pro 17" mid-2007 model. A few months ago, the power disconnected from the machine when the battery had already run down and the machine did a hard shutdown. When I booted it back up there were serious problems with the display. Eventually it stopped working altogether. I took it for service and it was determined to by the NVIDIA graphics processor problem, so Apple replaced my motherboard.
When I got the machine back from servicing, there was a rattle in the right fan that gradually got worse. After a while the touchpad button stopped depressing in the center. I also experienced several random shutdowns while operating on battery power. I learned about the swelling battery issue with macbooks and ordered a replacement. By the time the replacement battery arrived my original battery was quite swollen. I'm concerned that the swelling battery may have warped the case a bit, leading to the fan noise.
I have now replaced the battery, but I'm still experiencing random shutdowns after 20+ minutes of use on battery power. I have done the RSS tests that were recommended in other forums and there doesn't seem to be any random shutdown problems when I'm plugged in -- only under battery power. My understanding is that a swelling battery can sometimes cause the battery to disengage from the electrical contacts on the MB, causing a sudden shutdown. I'm wondering why the problem is persisting now with a new battery? After one random shutdown, I tried to power up again using the battery, while pushing the battery into place at various angles, but I couldn't find any angle that would give power to the machine. The fan noise is also still present.
Can anyone offer an explanation or advise on any methods to overcome these random shutdowns? I have checked the console and the machine isn't registering any error when it shuts down, although when it restarts it says "DirectoryService[35] Improper shutdown detected"

Yep, it is video (or: or audio for video) so unless you're sure you need it (because you work or will work with the DVC Pro HD video/audio codec), you can remove the plug from its' folder and put it in your documents folder (don't trash it, I have no idea if it is necessary for non-DVC Pro HD users to have it installed too).
The WWW is littered with posts from people encountering bugs and crashreports with DVCPROHDAudio.plugin as the main suspect. Most of those posts seem to be from video people rather than audio folks.
http://www.google.nl/search?q=DVCPROHDAudio.plugin&ie=utf-8&oe=utf-8&aq=t&rls=or g.mozilla:en-US:official&client=firefox-a
But, if you get crashes and you see this one mentioned in the report, disable it, restart, and see if the problem's gone.

Data Loading(Before and After Image)

I heard that a datasource which has both "Before and After Image " ,then the data can be sent directly to the infocube or from the DSO to the Infocube but where as
If a datasource supports after image then first it has to be loaded to the DSO and then to the Infocube ,
My question is how to know the image types of the datasource ?

Hi Ravi,
Check in ROOSOURCE tables in ECC. You can find the behvariaour options in DELTA field, so based on this table we can say will it support Cube/ODS.
    Delta Only Via Full Upload (ODS or InfoPackage Selection)
A    ALE Update Pointer (Master Data)
ABR    Complete Delta with Deletion Flag Via Delta Queue(Cube-Comp)
ABR1    Like Method 'ABR' But Serialization Only by Requests
ADD    Additive Extraction Via Extracto (e.g. LIS Info Structures)
ADDD    Like 'ADD' But Via Delta Queue (Cube-Compatible)
AIE    After-Images Via Extractor (FI-GL/AP/AR)
AIED    After-Images with Deletion Flag Via Extractor (FI-GL/AP/AR)
AIM    After-Images Via Delta Queue (e.g. FI-AP/AR)
AIMD    After-Images with Deletion Flag Via Delta Queue (e.g. BtB)
CUBE    InfoCube Extraction
D    Unspecific Delta Via Delta Queue (Not ODS-Compatible)
E    Unspecific Delta Via Extractor (Not ODS-Compatible)
FIL0    Delta Via File Import with After-Images
FIL1    Delta Via File Import with Delta Images
NEWD    Only New Records (Inserts) Via Delta Queue (Cube-Compatible)
NEWE    Only New Records (Inserts) Via Extractor (Cube-Compatible)
O
ODS    ODS Extraction
X    Delta Unspecified (Do Not Use!)

Compare BEFORE and AFTER image in replicat

Do any of You experts know how to make the following code smaller?
...,p_kolonner=@STRCAT("ID='",@IF(@COLTEST(BEFORE.ID,PRESENT),BEFORE.ID,""),"'>'",@IF(@COLTEST(ID,PRESENT),ID,""),"'¤",
"OBSOLETED_ON='",@IF(@COLTEST(BEFORE.OBSOLETED_ON,PRESENT),BEFORE.OBSOLETED_ON,""),"'>'",@IF(@COLTEST(OBSOLETED_ON,PRESENT),OBSOLETED_ON,""),"'¤",
"SMRT_ID='",@IF(@COLTEST(BEFORE...The actual parameter would look like:
P_KOLONNER: ID=''>'11531'¤OBSOLETED_ON=''>''¤SMRT_ID=''>'1'¤SM_SMID=''>'2011X0074-00'¤SMT_ID=''>''...
This code is part of the params section of a sqlexec in a replicat file where I want to concatenate before and after images of a table into one parameter. I have to replace all NULLs with '' or the whole string evaluates to NULL when one of the columns are NULL. I have a procedure receiving the parameter.
How do I write this code shorter? I have to use less code to accomplish the same thing.

Hi Yosemite:
You're right, the correct term is "Key Fields", in the previous post I made a mistake when referring to it as "Key Part", I'm sorry for the confusion.
Anyway, it is not clear to me if you managed to solve the problem or if you're still struggling with your data loads, if this is the case, Could you please elaborate?
-Which is the data source you are working with?
-Did you map the ROCANCEL field both to the 0STORNO and 0RECORDMODE InfoObjects?
-Are you using Addition or Overwrite on the Update Rules/Transformation Rules to the DSO?
-Have you applied any relevant SAP Note to fix this issue?
In case you have not read the blog by Swapna Gollakota, take a look at it, you might find it useful.
How does a datasource communicates "DELTA" with BW?
/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
Regards,
Francisco Milán.
Edited by: Francisco Milan on Oct 29, 2010 12:31 PM

How to covert before and after image details from logdump to SQL

Hi,
Through logdump,i am able to retrieve below before and after image details for an update statement.
Instead of below ascii format output, i need to know the complete sql statement before update and after update.
Is there any command to covert below output to readable SQL sentence?
2012/09/26 02:30:16.999.659 FieldComp Len 300 RBA 2528
Name: TEST.TESTTABLE
Before Image: Partition 4 GU m
5e50 86f5 af70 9660 b6fa 785c e34f 8881 0497 9507 | ^P...p.`..x\.O......
799f 2ee2 6399 d539 ea92 90de 828b 83d9 adc9 c8c4 | y...c..9............
ca87 9632 7136 a5fc 826f 8cc7 6ddd 7f8a e02e 816a | ...2q6...o..m......j
6ac4 739a 8011 5068 068a 4553 4937 93e7 cc5a d3d3 | j.s...Ph..ESI7...Z..
6a2b 2540 3be9 1df7 6d0c 0f17 d795 efd4 e0c5 dae9 | j+%@;...m...........
a488 a757 7c07 78a4 5f2a 1330 d2bb 5a05 7075 6b95 | ...W|.x._*.0..Z.puk.
529c f681 97d8 df6f 58d5 37dc e36d 8bc0 19d5 c7f0 | R......oX.7..m......
Bad compressed block, found length of 34549 (x86f5), RBA 2528
Logdump 2335 >n
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 300 (x012c) IO Time : 2012/09/26 02:30:16.999.659
IOType : 15 (x0f) OrigNode : 255 (xff)
TransInd : . (x01) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 24567 AuditPos : 4268948
Continued : N (x00) RecCount : 1 (x01)
2012/09/26 02:30:16.999.659 FieldComp Len 300 RBA 2947
Name: TEST.TESTTABLE
After Image: Partition 4 GU m
5e50 86f5 af70 9660 b6fa 785c e34f 8881 0497 9507 | ^P...p.`..x\.O......
799f 2ee2 6399 d539 ea92 90de 828b 83d9 adc9 c8c4 | y...c..9............
ca87 9632 7136 a5fc 826f 8cc7 6ddd 7f8a e02e 816a | ...2q6...o..m......j
6ac4 739a 8011 5068 068a 4553 4937 93e7 cc5a d3d3 | j.s...Ph..ESI7...Z..
6a2b 2540 3be9 1df7 6d0c 0f17 d795 efd4 e0c5 dae9 | j+%@;...m...........
a488 a757 7c07 78a4 5f2a 1330 d2bd 5a05 7075 6b95 | ...W|.x._*.0..Z.puk.
529c f681 97d8 df6f 58d5 37dc e36d e8b8 19d5 1af0 | R......oX.7..m......
Bad compressed block, found length of 34549 (x86f5), RBA 2947

From the reference guide:
*FORMATSQL*
Valid for Extract
Use the FORMATSQLparameter to output data in external SQL format, instead of the default
Oracle GoldenGate canonical format. FORMATSQLgenerates SQLstatements (INSERT, UPDATE,
DELETE) that can be applied to both SQLand Enscribe tables by utilities other than Oracle
GoldenGate Replicat.
NOTE Do not use FORMATSQL if the data will be processed by the Replicat process.
Replicat expects the default canonical format. Do not use FORMATSQLif
FORMATASCIIor FORMATXMLis being used.
A FORMATSQL statement affects all extract files or trails defined after it.
Default output
Without options, FORMATSQLtransactions are output as follows, in comma-delimited format:
● The begin-transaction indicator, B.
● The timestamp at which the transaction was committed.
● The sequence number of the transaction log in which the commit was found.
● The relative byte address (RBA) of the commit record within the transaction log.
● The SQL statements.
● The commit indicator, C.
● A newline indicator.
Every record in a transaction is contained between the begin and commit indicators. Each
combination of commit timestamp and RBA isunique. You can customize the output
format with optional arguments.
Default See “Default output”
Syntax FORMATSQL [<option>] [, ...]

Before image and after image is not updating correctly with 2LIS_04_P_ARBPL

Hello BW gurus
I am facing problem with the posting date extraction from the extractor 2lis_04_p_arbpl. I am getting incorrect before image and after image. Please let me know how to solve this problem.
Thanks and regards
kiran.

Hi,
It is difficult to check this in the Source System and there is no direct method. I can give you a workaround which we did analysed for some of delta datasources.
Steps to be followed sequentiall once the step is successful:
1. Create a Production order or something.. Note down the number.
2. Check the datasource whether you get the same Production Order as delta
3. Now do whatever confirmation etc . for the same Production Order
4. Check the datasource (RSA3) and see wat it extracts.. might be multiple records..
In that case just see the sequence of records.. and the changes each record has brought in.. hope this way we can simulate the delta datasource realtime..
And if you find the sequence or somthin is correct and in BW is not updating properly then it is our fault to dig and find out further.. If the issues is at the RSA3 itself, then u can raise an OSS Message as a Bug.
Hope it helps.
Regards,
Chathia.

What are Before and After Images ?

Hello Masters,
Best wishes to all.
For the past one week I've learnt many concepts from SDN, got all my doubts clarified.
On the same roll, I have one more question
What are Before and After Images ?
Where do we come across these terms ?
Could you please explain with an example ?
I always thank my replies in points
Thanks in advance...

Hai....
Before and After Images:
This Term is Used in the " Change Log "....
Change Log is one of the Table used in ODS....
That means the Changes in Running Request in ODS....
Example:
If you Enter the Request to " New Table" after activation the Request will be Deleted From the Table, You can see that in Change log......
Assign Points If It Halps....
BalajeeKannan

Rollover effect - before/after image?

Hello all.
I would like to create a "before and after" image to show retouching capability. In other words, when the visitor's cursor hovers over the "before" image it changes to the "after" image. Is this possible in Dreamweaver CC? Thanks.
Kevin from Cambridge

Sure. This rollover method uses pure CSS.
http://alt-web.com/DEMOS/Pure-CSS-Rollovers.shtml
Nancy O.

Before image and after image concept of ODS

Hi Gurus,
Could anybody help me in understanding the concept of " Before image and after image in ODS"
Kindly forward me if any good docs are available on my email ID: [email protected]
With regards,
wrushali

check this link for after image.
Re: regarding ODS
and before image is snapshot of the data before a change took place
after image is snapshot of the data after change.
these are used for delta update.
Hope it helps.
Regards

Wdf01000.sys BSOD on shutdown after imaging

Similar Messages

Maybe you are looking for