WDS 2012 standalone mode command line configuration
To configure WDS on command line I can run this: wdsutil /initialize-server /reminst:E:\RemoteInstall
However, I'd like to initialize WDS in standalone from the command line. Any ideas?
Thanks!
Well here's a really ugly way to do it with autohotkey:
Run, WdsMgmt.msc
WinWait,Windows Deployment Services,Windows Deployment Services
WinActivate
Sleep 1000
ControlSend,SysTreeView321,{Down},Windows Deployment Services
Sleep 1000
ControlSend,SysTreeView321,{Right},Windows Deployment Services
Sleep 1000
ControlSend,SysTreeView321,{Down},Windows Deployment Services
Sleep 1000
Send {Alt}+a
Sleep 1000
Send c
WinWait,Windows Deployment Services Configuration Wizard,You can use this wizard to configure Windows Deployment Services
ControlClick,&Next >,Windows Deployment Services Configuration Wizard
WinWait,Windows Deployment Services Configuration Wizard,Select one of the following options
ControlClick,&Standalone server,Windows Deployment Services Configuration Wizard
Sleep 1000
ControlClick,&Next >,Windows Deployment Services Configuration Wizard
WinWait,Windows Deployment Services Configuration Wizard,The remote installation folder will contain boot images
ControlSetText,Edit1,E:\RemoteInstall,Windows Deployment Services Configuration Wizard
Sleep 1000
ControlClick,&Next >,Windows Deployment Services Configuration Wizard
WinWait,Windows Deployment Services Configuration Wizard,You can use these settings to define which client
ControlClick,&Next >,Windows Deployment Services Configuration Wizard
WinWait,Windows Deployment Services Configuration Wizard,You have successfully configured Windows Deployment Services
ControlClick,&Add images to the server now,Windows Deployment Services Configuration Wizard
Sleep 1000
ControlClick,Finish,Windows Deployment Services Configuration Wizard
Exit, 0
Similar Messages
-
How to install msmq on server 2012 r2 by command line
Is it possible to install msmq on server 2012 r2 by command line?
Hi Skylerjcollins,
Agree with Stacy, you can refer to the script below:
#List the related features with "Name" and "Display Name"
Get-WindowsFeature "*msmq*"
#Install the features with the names get from above cmdlet
Install-WindowsFeature -Name "FeatureName"
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Parsing in Weblogic/jsp doesn't work; application-mode (command-line) works
Hello-
Parsing my XML file in Weblogic/jsp doesn't work, whereas it works
in application-mode... (albeit on two different machines)
Here are the parameters:
server1:
weblogic 6.0
win2k server
jre1.3
my personal machine:
***no weblogic***
win2k server
jre1.3
When I run my code as an application (command-line style) on my machine,
parsing in my xml file works fine, and I can do a root.toString() and it
dumps out the entire xml file, as desired.
However, running my code inside weblogic (on server1) in JSP, parsing in
my file and doing a root.toString() results in the following: [dmui: null]
(where dmui is my root)
(even though i'm running it on two different machines, i'm positive its the
same code (the servers share a mapped drive)...
So, I think its probably because I'm using a different parser, as
specified by weblogic? There are no exceptions being thrown. Here's my
(abbreviated) code, which is called either command line style or in a JSP:
// Imports
import org.w3c.dom.*;
import org.w3c.dom.Document;
import javax.xml.parsers.*;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
DocumentBuilderFactory docBuilderFactory =
DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
mDocument = docBuilder.parse (inFile);
myRoot.toString()
-END
Doing a System.getProperty("javax.xml.parsers.DocumentBuilderFactory")
results in:
server1 (weblogic/jsp):
"weblogic.apache.xerces.jaxp.DocumentBuilderFactoryImpl"
my machine (application-mode):
null
Does anyone have any ideas about how to get this work? Do I try to set it
up so that they both use the same parser? Do I change the Weblogic parser?
If so, to what? And how?
Am I even close?
Any help would be appreciated..
Thanks, Clint
"[email protected]" <[email protected]> wrote in message
news:[email protected]...
No problem, glad you got it worked out :)
~Ryan U.
Jennifer wrote in message <[email protected]>...
I completely missed setting the property(:-o), foolish mistake. That wasit. Thanks.
"j.upton" <[email protected]> wrote:
Jennifer,
Personally I would get rid of import com.sun.xml.parser.* and use xerces
which comes with WLS 6.0 now, unless like I said earlier you have a need
to
use the sun parser :) Try something like this with your code --I've put
things to watch for as comments in the code.
import javax.xml.parsers.*;
import org.xml.sax.SAXException;
import org.w3c.dom.*;
import java.io.FileInputStream;
public class BasicDOM {
public BasicDOM (String xmlFile) {
try{
FileInputStream inStream;
Document document;
/*You must specify a parser for jaxp. You can in a simple view
think
of this as being analogous to a driver used by JDBC or JNDI. If you are
using this in the context of a servlet or JSP and have set an XML
registry
with the console this happens automatically. You can also invoke it in
the
context of an application on the command line using the -D switch. */
System.setProperty("javax.xml.parsers.DocumentBuilderFactory",
>>>
"weblogic.apache.xerces.jaxp.DocumentBuilderFactoryImpl");
// create a document factory
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
// specify validating or non-validating parser
dbf.setValidating(true);
// obtain a factory
DocumentBuilder db = dbf.newDocumentBuilder();
// create a document from the factory
inStream = new FileInputStream(xmlFile);
document = db.parse(inStream);
}//try
catch (Exception e)
System.out.println("Unexpected exception reading document!"
+e);
System.exit (0);
}//catch
}//BasicDom
// Main Method
public static void main (String[] args) {
if (args.length < 1)
System.exit(1); file://or you can be more verbose
new BasicDOM(args[0]);
}//class
=============================================
That will give you a basic DOM you can manipulate and parse it fromthere.
BTW this code
compiled and ran on WLS 6.0 under Windows 2000.
Let me know if this helped or you still are having trouble.
~Ryan U.
"Jennifer" <[email protected]> wrote in message
news:[email protected]...
Actually I included com.sun.xml.parser.* as one last febble attempt toget
it working.
And as for source code, I included the code. If I just put that oneline
of code
in, including the imports, it fails giving me an error listed above inthe
subject
line. Here is the code again:
package examples.xml.http;
import javax.xml.parsers.*;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.w3c.dom.*;
import java.util.*;
import java.net.*;
import org.xml.sax.*;
import java.io.*;
public class BasicDOM {
static Document document;
public BasicDOM (String xmlFile) {
try {
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
} catch (FactoryConfigurationError e){
System.err.println(e.getException());
e.printStackTrace();
// Main Method
public static void main (String[] args) {
BasicDOM basicDOM = new BasicDOM (args[0]);Hi, Rob
Does it work in WL9.2?
It seems I do it exactly as the explained at http://edocs.bea.com/wls/docs81/programming/classloading.html - and it fails :o(.
I try to run my app.ear with WL9.2 There are 2 components in it: webapp and mdb. The webapp/WEB-INF contains weblogic.xml:
<weblogic-web-app>
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>
</weblogic-web-app>
Mdb is expected to run in the same mode, i.e. to prefer the webapp/WEB-INF/*.jar over the parent Weblogic classloader. To do so I add the weblogic-application.xml to the app.ear!/META-INF:
<weblogic-application>
<classloader-structure>
<module-ref>
<!-- reminder: this webapp contains
prefer-web-inf-classes -->
<module-uri>webapp</module-uri>
</module-ref>
<classloader-structure>
<module-ref>
<module-uri>mdb.jar</module-uri>
</module-ref>
</classloader-structure>
</classloader-structure>
</weblogic-application>
Now, when classloader-structure specified, both webabb and mdb prefer the weblogic root loader as if prefer-web-inf-classes not defined at all. -
Command Line configuration of Replication
I've recently installed iDS 5.0, on Solaris 8.
I've discovered the reponse files have been scaled down from iDS 4.12.
We had utilized the SIR entries in iDS4.12 response files to automate
Supplier/Consumer installation. This feature appears to have been
removed in iDS5.0. I have identified various entries that are stored in
the dse.ldif file, when using the console to configure for multi-master
replication, but for some of the entries, such as nsDS5ReplicaName,
nsState, I don't have a clue what to assign.
I'm looking for a procedure, to configure consumers & multi-masters,
from the command-line.
I can "guess" that ldapmodify is essentially what would be used.
Trying to configure hundreds of machines for multi-master replication is
impractical via the console (GUI) interface. We need a command line
method.
Any help would be greatly appreciated.
Regards
Tom Sandholm
Sr. Unix Architect
Genuity
eBusiness Application EngineeringTom,
Please find below 2 examples of ldapmodify commands to create replica and
replication agreements.
Regards,
Ludovic.
SUPHOST=elk
SUPPORT=389
CONS1HOST=norge
CONS1PORT=7389
MGRDN="cn=Directory Manager"
MGRPW=MySecret
BASE="ou=a"
SUPREPLICAID=2
CONS1REPLICAID=1
ldapmodify -c -b -h ${SUPHOST} -p ${SUPPORT} -D "${MGRDN}" \
-w ${MGRPW} << EOM
dn: cn=replica, cn="${BASE}", cn=mapping tree, cn=config
changetype: add
objectclass: top
objectclass: nsds5replica
objectclass: extensibleObject
cn: replica
nsds5replicaroot: ${BASE}
nsds5replicaid: ${SUPREPLICAID}
nsds5replicatype: 3
nsds5flags: 1
nsds5replicabinddn: cn=Replication Manager, cn=config
EOM
Use nsds5ReplicaType: 2 for a readonly replica.
Use nsds5ReplicaType: 3 for a master replica.
The nsds5flags: 1 means to log the changes (must be set on master or hub
replica).
You don't need to set state and name since they are generated by the
replication code.
Make sure nsds5replicaId are different for master replicas. You can use the
same replica id for all read-only consumers (but a different one from the
masters).
ldapmodify -c -b -h ${SUPHOST} -p ${SUPPORT} -D "${MGRDN}" \
-w ${MGRPW} << EOM
dn: cn=agmt${AgmtNum}, cn=replica, cn="${BASE}", cn=mapping tree, cn=config
changetype: add
objectclass: top
objectclass: nsDS5ReplicationAgreement
cn: agmt${AgmtNum}
nsDS5ReplicaHost: ${CONS1HOST}
nsDS5ReplicaPort: ${CONS1PORT}
nsDS5ReplicaBindDN: cn=Replication Manager, cn=config
nsDS5ReplicaCredentials: secret12
nsDS5ReplicaBindMethod: SIMPLE
nsDS5ReplicaRoot: ${BASE}
description: A sample replication agreement.
EOM
Tom Sandholm wrote:
I've recently installed iDS 5.0, on Solaris 8.
I've discovered the reponse files have been scaled down from iDS 4.12.
We had utilized the SIR entries in iDS4.12 response files to automate
Supplier/Consumer installation. This feature appears to have been
removed in iDS5.0. I have identified various entries that are stored in
the dse.ldif file, when using the console to configure for multi-master
replication, but for some of the entries, such as nsDS5ReplicaName,
nsState, I don't have a clue what to assign.
I'm looking for a procedure, to configure consumers & multi-masters,
from the command-line.
I can "guess" that ldapmodify is essentially what would be used.
Trying to configure hundreds of machines for multi-master replication is
impractical via the console (GUI) interface. We need a command line
method.
Any help would be greatly appreciated.
Regards
Tom Sandholm
Sr. Unix Architect
Genuity
eBusiness Application Engineering--
Ludovic Poitou
Sun Microsystems Inc.
iPlanet E-Commerce Solutions - Directory Group - Grenoble - France -
Hi,
How can i launch my app in offline mode from a command line ? I have added
<offline-allowed/> to my Jnlp and use the following
java -Djnlpx.home="c:/program files/java web start" -cp "c:\program files\java web start\javaws.jar" com.sun.javaws.Main http://localhost/tech/tech.jnlp
The application gets downloaded and runs fine. Now if i turn of the Web Server (IIS), then try the above command it won't work. Shoudn't it work as the offline tag is present in local jnlp ? I thought webstart would be using its local cache if the web server is down, as long as the offline tag is present.
With the Offline tag, Offline mode does work fine from webstart application manager even when the Web server is down. Is there a switch to do the same using the above command line ?
Any response is much appreciated.
Best regards,
zapMarc, thanks for the prompt reply.
I guess its a subtle confusion on my part with the use of offline-mode. From the webstart app manager, i did click the connector plug-icon and the application got launched from the local cache correctly. The scenario is that the the web server is down but the machine still connected to the network and hence my program even does network stuff. Now when i tried to launch the application from command line and still providing a URL argument instead of a path of the Jnlp in the cache, it didn't work. I had thought that either there might be an offline switch in the command line or javaws would automatically launch the jnlp from the local cache even when provided with a bad Url argument. But in the absence of the above, i have now explicitly indicated the local Jnlp path and the following is working fine from the command line in the above context (web server down).
java -Djnlpx.home="c:/program files/java web start" -cp "c:\program files\java web start\javaws.jar" com.sun.javaws.Main "file:///C:/Program Files/Java Web Start/.javaws/cache/http/Dlocalhost/P80/DMtech/AMTechClient.jnlp"
Thanks again.
Best,
zap -
I need to perform 3 configurations via command line in order to automate firefox deployment in my company. These are 1) add a smart card. 2) import certs. 3) alter settings in about:config. All of these are normally done through the Firefox GUI. How can they be done command line?
I need to perform 3 configurations via command line in order to automate firefox deployment in my company. These are 1) add a smart card. 2) import certs. 3) alter settings in about:config. All of these are normally done through the Firefox GUI. How can they be done command line?
-
Im not to sure if I've accidentally changed a setting in the application 'terminal' before it started playing up but when i start it in single mode now the command line says "-sh-3.2#" instead of something else i forgot what it was at the beginning but it ended with "root #"
Does anybody know how to change it back to thatWhat does it show if you hit enter at that point?
http://www.westwind.com/reference/os-x/commandline/single-user.html -
How to start up MAC mini only in the verbose mode (command line) , no GUI
Can anyone let me know how I can set up the mac mini to ALWAYS boot into a verbose mode only, no GUI interfaces at all?
Mac Mini Mac OS X (10.4.6)
Mac Mini Mac OS X (10.4.6)Hi, Andy your replies are really helpful. I did tried your method and also followed the link http://www.oreillynet.com/pub/h/348
Now my mac mini - Tiger seems hanging forever at the boot up screen. A Apple log showed up with a message "Starting Mac OS X ..." and now almost 5 minutes passed, nothing happened ... -
Sending image sequence job to compressor in command line : how to set the framerate?
Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
-jobpath <url> -- url to source file.
-- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
-- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode -
Issue with opening Deski in standalone mode through command line
Hi,
I am using the below command to open deski in the background, in standalone mode. I keep getting the login prompt. Please suggest the correction that needs to be done
"...\busobj.exe" -user "" -pass "" -nologo -auth "standalone" -system ""Looks like it might be bug 15982024 where the target is already part of a cluster. Can you check your unpromoted targets (Setup -> Add Target -> Auto Discovery Results -> tab Agent Based Targets) and see if a cluster on either of those hosts is already discovered but not yet promoted. If so, you can try to delete that discovered cluster, and retry the cmd.
Log File Locations
The following examples show possible log file locations:
Example 2-3 No Configuration Directory Specified with Setup Verb (default location)
user.home/.emcli/.emcli.log user.home/.emcli/.emcli.log.1
If you do not specify a configuration directory when you run the setup verb (-dir option is omitted), EM CLI assumes the .emcli configuration directory is located within your local home directory. The log files are placed at the root level of the .emcli directory. The .emcli directory must be local (not mounted remotely). -
Hi
I’m upgrading our SSIS packages from SQL 2005 to SQL 2012 .
Everything is working fine in Visual Studio, but when I’m submitting dtexec.exe it’s finishing right away in the command line (the actual execution takes long time).
It looks to me that as the return code doesn’t pass properly.
As I have depending tasks how I can make sure all jobs will be executed in the proper order.
(We never had this issue in SQL 2005)
C:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn>dtexec.exe /ISSERVER "\"\SSISDB\Direct_Prod\Direct_SSIS_Package
\DD_Load_Customer.dtsx\"" /SERVER TORSQLSIS01 /ENVREFERENCE 2
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 32-bit
Copyright (C) Microsoft Corporation. All rights reserved.
Started: 10:21:55 AM
Execution ID: 21138.
To view the details for the execution, right-click on the Integration Services Catalog, and open the [All Executions] report
Started: 10:21:55 AM
Finished: 10:21:56 AM
Elapsed: 0.766 secondsAs per MSDN /ENVREFERENCE argument is used only by SQL Server Agent
see
https://msdn.microsoft.com/en-us/library/hh231187.aspx
below part is what it says
/Env[Reference] environment reference ID
(Optional). Specifies the environment reference (ID) that is used by the package execution, for a package that is deployed to the Integration Services server. The parameters configured to bind
to variables will use the values of the variables that are contained in the environment.
You use /Env[Reference] option together with the /ISServer and the /Server options.
This parameter is used by SQL Server Agent.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
I have connected my early 2014 MacBook to a late 2012 imac and connected them via Thunderbolt cable. Pressing Command F2 causes the screen on teh iMac to change to teh MacBook background screen, but does not display any desktop files or command lines. Any ideas how to fix this?
Hi tdmone,
Welcome to the Support Communities! The resource below may help you with the Target Display Mode options for connecting your Macbook and iMac:
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
http://support.apple.com/en-us/HT3924
The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Are you connecting via the Thunderbolt ports on both computers?
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and off.
I hope this information helps ....
- Judy -
Any way to configure Oracle Vault .through command line
I wanted to configure Oracle Vault in our enviornment
I'm looking for some options to configuer through command line
Is it possible if yes the steps / any reference.
PS : New to this forum pl. excuse if its a repated one (tried to see relevant one but didn't find any) if any one can direct it would be greate.
Edited by: 932549 on May 11, 2012 8:55 AMHey man I would help with your question. But I also have some Q's. How can I email apple for my concerns? And how can I post my RSS OR in the forum is complicate. As you know for the iPhone apple hasn't changed the way the os looks like it's pretty simple. Last night I was in the T-Mobile store and I saw the new G2 I'm not a android fan just because of their lags. Apperantly the G2 was pretty responsive and I'm sick and tired of apples os for the iPhone its stuck in the past. Apple has to get more creative than android and get it going. Make the iOS 5.0 prettier than androids os. Please
-
Fresh install (2012/11/01): Not reaching the command line after boot
Hi
I just installed the latest 2012/11/01 base + base-devel Arch, but after booting in. the process stopped at the point were the last messages from the kernel were printed in the console. The boot process never reached the shell command line for logging in. I re-installed, thinking I did something wrong but again I had the same problem. Eventually. I accidentally found that by keying Enter, I could get the shell login request and I could login OK, having a seemingly functional base system. However, the console font I specified in vconsole.conf did not take effect and the halt command would hang, although reboot worked OK.
I have of course little experience with systemd, but I get the feeling the all this is due to systemd not running properly. I read whatever documentation I found relevant but since there is so much of it, I believe I must have missed the relevant info.
Please help me to get my new install run properly and please clarify whether have to explicitely enable systemd after completing the official installation instructions.
My thanks in advance.neok wrote:please clarify whether have to explicitely enable systemd after completing the official installation instructions.
Read this news item.
https://www.archlinux.org/news/systemd- … allations/
neok wrote:the console font I specified in vconsole.conf did not take effect
Please always post your configuration files if you reference them.
neok wrote:the halt command would hang
The halt command does not turn off your computer. The "poweroff" command does.
Writing "systemctl poweroff" is not necessary, as /sbin/poweroff is a link to systemctl poweroff.
Last but not least search for suspicous lines in the log files. You can read them with this command.
$ journalctl -
How to run ADF command-line test-client on standalone weblogic host
I have followed the steps to create a test client for the ADF application. In used the following link:
http://download.oracle.com/docs/cd/B31017_01/web.1013/b25947/bcquerying007.htm
The above link does not talk about how to setup the environment where the standalone weblogic is installed to be able to run the test client.
I can run it in the jdeveloper environment.
I can also run from the command line on the development host, by cut-paste the command from the jdeveloper output log tab.
I am trying to run this client on the machine where we have a weblogic installed (standalone) for testing. We can run our ADF application from the browser with no issues. We want to automate and run some testing related to the ADF model (non-viewcontroller part) from the command line on this test stage.
Which/Where are the ADF libraries?
How can I add our application jar deployed on the weblogic (ear file) to the CLASSPATH?
What other libraries ADF/Weblogic do I need for the command line test client?
What am I missing?
Thanks for any help.
Edited by: mmunawar on Jul 2, 2011 1:03 PM
Edited by: mmunawar on Jul 2, 2011 1:04 PMcreate weblogic application server connection from jdeveloper and then Deploy that application through jdeveloper in the weblogic application server and then run it from jdeveloper and see if its working.
Maybe you are looking for
-
[SOLVED] Xinerama crashing xorg 1.9
After installing the latest xorg packages (1.9) I can no longer use xinerama when I have two monitors connected. I've tried this with several WMs, and none of them want to start with xinerama activa and an external monitor on VGA from my laptop. I'm
-
Portal and Internet Explorer problem
Hi everyone. My problem is that I'm using Portal through the WEB AS Java stack SP09 and i can't update to the newer stacks since I'm on IDES system, so it has to be SP09. Well, my operating system Win 2003 x64 comes with Internet explorer 8 by defaul
-
Tri - State Checkbox in pdf form
Hi all, I'm using Adobe Acrobat 9 Standard to create forms. I want to include a tri state checkbox (Checked / Un-Unchecked / Crossed) in my form. There is an option to add checkboxes but they are only bi state ( Checked & Un Checked). Do you have any
-
Random character showing up in browser - can't remove.
I am using Dreamweaver CS5 and an this "P" shows up in the browser, the Live View, Live Code, but does not show up in the code for me to erase it. Any ideas? Below is part of the code file and a screen sot of the chararcter I want to remove. Any help
-
Moving into SAP - SOA - Netweaver - XI
Hi, I'm a non SAP person and currently work as a Technical Architect in SOA field predominantly from middle ware integration, Java & J2EE background with an overall experience of 10+ years. I specialise in IBM WebSphere domain specially BPEL, EIS Ada