WDS CONFIGURATION IN 2008R2 FOR XP CLIENT

I CANNOT FIND install image and boot image IN WINDOWS XP CD, MAY I KNOW HOW TO CREATE THIS TO DEPLOYE WINDOW XP IN WDS SERVER.
Many Thanks & Best Regards, K.SURESH

Can you please briefly explain how to create capture image, i am not able to follow the above URL
There is a step-by-step reference here:
http://technet.microsoft.com/en-us/library/cc766320(WS.10).aspx
Your "capture" image is only used to perform "capture" an image of the reference machine - when you "capture" an image of the reference machine, this "capture" process produces the "install" image.
The "capture" OS is not required to be the same OS, e.g. you "capture" WinXP" but use Win7 to perform the "capture'.
(WinVista and later OS versions are natively able to create and extract WIM, so they are simpler to use for that task.)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Is there Ready Made Configuration Packs available for Lync Client ( Client on end user computer ) and Server

Hi,
is there Ready Made Configuration Packs available for Lync Client ( Client on end user computer ) and Server ... to check the configuration, services,compliance, functionality of all the features etc at end user level
and server configuration packs
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

No, there is not something available for Lync. What's available can be found here (and it's all not recent):
https://www.microsoft.com/en-us/search/DownloadsDrillInResults.aspx?q=SCCM+%22configuration+pack%22&cateorder=2_5_1&site=
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Configuring SUP address for IBCM Clients

I have a question about how to configure SUP address for clients that will be roaming from Intranet to the Internet (aka VPN Users)
Currently I have IBCM up and running. Clients report in and are able to download and install software from the IBCM DP. Currently we have group policy's configured to point clients to the correct internal WSUS/SUP servers.
For clients to use IBCM and Internet based SUP is a Windows Update group policy not possible at all? For example is the only way for clients use the IBCM SUP to have absolutely no WSUS Group Policy configured? Is configuring a Domain Group
Policy to have clients point to the Internet Based IBCM SUP not possible?
SCCM 2012 R2
Thank you.

You can create a group policy to point to your SUP. Configure the policy, Specify Intranet Microsoft Update Service Location. Its located in Computer Configuration - Administrative Templates - Windows Components - Windows Update. Note
that the local group policy will be created regardless of using the domain group policy. So, its just a redundant effort.
Best, Jacob I'm a PC.

Configure PDC domain for windows Client

Hello,
Forgive my approximate English.
I need help to install a server Mac with a domain Activate directory ( PDC) so clients Windows connect to it.
I installed th server Mac Os to create a master Open Directory.
Mac OS Server has to configure the DNS with host's name.
The customers Windows 8.1 see the server on the network.
They indeed answer Ping.
NSlookup does not return error.
But when I attempt to configure the domain on the client Windows, it does not find the server. (An error DNS returned?)
Thank you for your help.

foossile wrote:
Thx for your response.
t is possible then for the Mac Server to supply the following services for clients Windows:
- File sharing with rights.
- Management of group user.
- Possibility of imposing a police of security of password.
Thank you, it will be everything.
Yes a Mac server can provide file sharing to Windows users, yes it can set permissions for those files and folders being shared
No it cannot do the equivalent of Group Policies as used to manage Windows systems
Yes it can define rules for passwords such as length, how long before it must be changed, how often it can be reused, etc.

ChaRM configuration issue for 2 Clients...

Dear Friends,
I have configured ChaRM in Solution Manager 7.0 EhP1 system. It is working fine without any issues. But now I came across a new requirement and finding trouble in configuring the required scenario.
Currently there is only single client in DEV, QA and PRD system for which ChaRM is configured. Now, I want to configure the ChaRM for 2 clients in each system.
For example,
<ZCHARM_1> -- SOL:001 -- > DEV : 100 --> QAS : 200 --> PRD1 : 300
<ZCHARM_2> -- SOL:001 -- > DEV : 500 --> QAS : 600 --> PRD2 : 700
(Please note, ZCHARM_X is a project and SOL-001 is a Solution Manager ChaRM client).
First up all, I would like to understand, is it possible? is it supported by SAP ?
If yes, how can we configure client specific route for SAP standard transport layer (SAP)? What are the other concerns in using above system landscape in ChaRM?
Please note, we do not want to use separate hardware for either DEV or QA system.
Please can someone guide in this case?
Rajesh Narkhede

Rajesh,
I am not aware if you have searched on this issue, but You may want to take a look at this thread.
Change Request Management for multiple production clients
This configuration should work fine, because in essence, its a 3 system landscape, so there should not be major issues on the way.
From the TMS Standpoint you need to define a transport layer for each development client.
You can create a single project with the logical components or you can create multiple projects with each set of systems. Remember to do the TMS configuration right and you should be set.
Cheers!
Edited by: Banerjee Vivek on Mar 29, 2011 1:02 PM

Fixed IP for PPTP client

Hi,
is it possible to configure static ip for pptp client somewhere in SL Server?

You will either need a radius server to assign the ip adresses or you must make a separate pool containing a single ip address for each client. his means lots of configuration and will hence only be workable if you have few clients.
Regards,
Leo

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

Initial configuration of ACS 5.1 for EAP authentication for Wireless clients

Hi,
I have set-up with below devices :
Wireless LAN controller 5508
LAP 3302i
and ACS 5.1
since i am new in ACS 5.1 configuration , I need so information to go ahead to configure ACS 5.1.
which EAP method to use for wireless client authentication ? what is the best practice ?
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
I will be obliged to get atleast initial configuration for ACS 5.1 to enable the EAP method,
I need GUI based initial configuration for ACS 5.1
This mentioned ACS 5.1 is installed on ACS 1121 hardware appliance.

Hi,
which EAP method to use for wireless client authentication ? what is the best practice ?
-> I would advise the most widely spread EAP method, which has the best ratio security/easy to deploy: PEAP with MSCHAPv2, which is available by default by all windows machines.
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
-> You will always need to install a server certificate, however, there is no need for client certificate because the authentication is based on the MSCHAP credentials exchange, not certificate based. The only requirement on the client regarding certificates is the following.
If you want to validate the server certificate, you have to install the server certificate under the trusted CAs of the clients.
If you do not require to trust the server certificate, you can simply disable the option of server certificate validation.
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
-> The server certificate can be a simple self signed certificate that you generate and install on the ACS GUI.
Please feel free to follow this step-by-step guide on
PEAP under Unified Wireless Networks with ACS 5.1 and Windows 2003 Server:
http://www.cisco.com/en/US/partner/products/ps10315/products_configuration_example09186a0080b4cdb9.shtml or in pdf
http://www.cisco.com/image/gif/paws/112175/acs51-peap-deployment-00.pdf.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Message submission rate for this client has exceeded the configured limit

Hi,
I got the below error when user try to send an email to more than 1 users from their application.
host Exchange[exchange] said: 421 4.4.2 Message submission rate for this client has exceeded the configured limit (in reply to MAIL FROM command) <*@gibsonins.com>: lost connection with exchange[exchange] while sending RCPT TO .
Please let me know the solution for this issue.
Regards,
Hakim.B
Hakim

Hi All,
I have recently migrated my server from exchange 2010 to exchange 2013 and I am facing same issue here and have set message rate limit to unlimited and also checked the CPU.
All looks normal then also the issue is there.
I have tested the scenario on my system. Tried to send 10 mails in 1 minute and while sending the email at 9th one it gives error.
"An error occurred while sending mail. The mail server responded: 4.4.2 Message submission rate for this client has exceeded the configured limit. Please verify that your email address is correct in your Mail preferences and try again."
Can anyone help me on this.
Thanks,
Ganesh Prajapati

Configure SUP location for IBCM (Internet Only) Clients

I'm using ConfigMgr 2012 R2 with a single primary site. I have a second site server deployed in the DMZ configured
for Internet clients. I have a Internet MP and DP configured with SSL and they are working well.
I have a question about how to configure the SUP for internet only clients. I configured my internet facing SUP to require SSL and configured it for Internet and Intranet clients.
I installed the ConfigMgr 2012 client on my test machines with the CCMALWAYSINF=1 option to be connected internet only.
The clients are not getting a local policy to connect to the SUP and if I add the internet SUP in the local group policy myself it doesn't do anything. If I run the "windows updates" cycle from the Windows Update client (NOT
ConfigMgr) it seems to connect and sync with the SUP (WindowsUpdate.log) but ConfigMgr does not appear to recognize the SUP and doesn't point the clients to connect to it and upload the results.
Any Ideas how to force my clients to connect to the internet facing (IBCM) SUP to scan for required updates? Anybody deploy a internet SUP lately that can provide some guidance? Thank you very much

Check the log file(s) on the Internet facing site system. The easiest method to check the sync status is by going to the monitoring workspace in the console and then look at the
Software Update Point Synchronization Status node.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

How to configure router to use ip pool on the aaa server for vpn clients

how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aaa server username databse and also use the ip pool cretaed on the aaa server. i am not able to find the command on the router pointing to use the pool created on the aaa server. can u some one help me with this command.
sebastan

Hello Sebastan,
what do you use as AAA server (e.g. ACS with TACACS+ or RADIUS) ?
Regards,
GNT

TMS configuration for multi-clients in one system

Hi All,
we have got some problem defining transport routes in stms in transport domain...
We have to add to target group for one system 6 clients:3 clients with the dev/test roles for country X and 3 clients with dev/test roles for country Y.
Transport requests have to route only between clients for defined country (only for country X or only for country Y, must not mix).
How i can get status when transport requests will route in one system only between clients of country X (or only for country Y)?
Should i define two target groups and add to one group 3 clients for X and to the second 3 clinets for Y? I am not sure that it is enough. May be exists a lot of other options/ actions?
Where is garanthy that requets from country X will not mixed with requests from Y?
Thanks a lot.

> The SSO is working fine for only the client which we used to import the certificate (verify.der).
> 1>Is it that the certificate import should be done from all the clients exclusively ?
Logon ticket certificate is instance wide, not client dependent. And you need to call STRUSTSSO2 in client 000 to export/import.
> And the SSO is not working for other clients in the same system .
> 2>If yes can you tell the procedure, why b'coz transaction STRUSTSSO2 is same for all clients and if we try to import the certificate again how about the existing one over there ?
Could you provide more details about this issue you're facing? What is the Portal UME source? What application is it based on, BI or ESS/MSS?

Cisco Jabber for Windows Client SDK

Is there an SDK for Cisco Jabber for Windows client? I could only find the Web SDK. Are there no other SDKs that would let me control features of the Jabber Windows Client?

And in order to avoid TAPI limitation, they say they have started using Jabber which controls all phone functionalities through an Application User connected to the Call Manager.
Assuming they are referring to the normal Jabber for Windows/Mac/iOS/Android applications then this is wrong. Jabber - the client, not the IM&P servers which are part of the CUCM cluster (if you're familiar with Lync consider CUCM+IM&P servers a Front End Pool) - do not use an Application User at all. When a user starts Jabber, assuming SAML SSO is off, they supply an email address. This is used to find the servers via DNS SRV records, or the Mobile and Remote Access Expressway (roughly analogous to a Lync Edge pool) to tunnel through the firewall. After the email address they are prompted for their End User username and password. This is then used to access several APIs on the server, namely the User Data Service to discover what the user has. This would include what the user has configured/available to them. After this is done the Jabber client does one of three things with respect to phone functionality:
If the user has no phone devices provisioned for them - physical or software - it becomes an IM&P client only.
If the user has a software phone phone provisioned, it registers as that using SIP. In this way Jabber is the actual phone. This is called a CSF device for Jabber Windows/OS X.
If the user has a desk phone assigned to their End User account AND administrative policy is to default to desk phone control, it registers to CTI Manager on the CUCM server to control the user's physical phone.
A user can toggle between option two and three, if appropriately provisioned, but cannot have both simultaneously. In other words, Jabber is either controlling a physical phone over CTI or is a phone itself using SIP. The difference is where the audio/video media is sent from/to.
All of this happens using that human's End User credentials.
Now, if you wanted to have a server control the user's phone - either a physical one or Jabber - you would use the TSP as an interface to CTI Manager on the CUCM server and receive real-time events (e.g. the user went off-hook, the phone is ringing with this caller ID, etc.) and issue commands to that phone (e.g. make a call to X). This is done using an Application User account because the server would need to do this for multiple users simultaneously. If you also use the Super Provider concept, the CUCM administrator doesn't have to take the extra step of associating every phone to your Application User manually. Instead, you can simply issue CTI subscriptions to see any/all device activity you want.
This is all assuming you wanted to do the integration server-side to avoid having to update the Cisco TSP application on every user PC (which also limits your WPF application to machines capable of running the TSP) every time the CUCM administrator patches the servers. If you don't care about that, then you can do this all client-side on the user's PC, and have them supply their End User credentials.
Of course, you could also reconsider the Jabber SDK and just embed the make/receive call functionality directly into your application instead.

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

WDS CONFIGURATION IN 2008R2 FOR XP CLIENT

Similar Messages

Maybe you are looking for