WDS Image Problem

Hi Team,
Can anyone help me on below query.
I personally installed WDS services on Windows Server 2008 and Configured.
We have Lenovo ThinkCenter System with different models for user at our site . In one system we have installed Windows 7 OS and Recommended Software
Without Drivers. Same System put on capture process an that same images uploaded on WDS. We are successfully installed on Multiple System and after installation we update the OS as well as Drivers. But unfortunately after some time we are getting
the error "display driver stopped responding and has recovered" don't know why the error gets.
To fix this error i tried the link http://support.microsoft.com/kb/2665946/en-gb from this link also not get resolution.
When we research on Lenovo WebSite link http://support.lenovo.com/en_IN/diagnose-and-fix/detail.page?DocID=HT075224 its says to reinstalled the OS and then manually installed the drivers and than update for the OS. Can anyone advise us should i use WDS services
or go for the manually installation. Our aim is time consumption and get all the amities work properly.
Please let me know the resolution.
Thanks,
Prasad S

can you post your autounattend xml file somewhere for us to review ?

Similar Messages

Wds image problem after few deployments

Hello ,
I made a new image clean install windows 7 install app/update and capture it.
when i deploy it to computers its work about 10 times and then i get this error "Windows could not parse or process the unattend answer file for pass[specialize]. The setings specified in the answer file could not be applied.
The error was detected while processing settings for component[Microsoft-Windows-Shell-Setup]"
I'm not using any answer file , if I make a new image from clean install its work for about 10 times and then i get this error
anybody knows why its happens ?

can you post your autounattend xml file somewhere for us to review ?

Image problem in V4.0

Hi,
Previously I had lots of problems with showing a BLOB image from a table
in a report using the apex_util.get_blob_file_src function.
Varad put me right on several ocassions: see the thread at
Confusion with get_blob_file_src
Eventually everything went well, and I got my images of a specific size on the screen.
In the last month or two, the host database that I rent went up from version ten to version
eleven, and the apex version changed too from 3.2.1 to some version of 4.
I've only now discovered that the images don't display any more. I've re-read the thread
mentioned above but can see no deviation from Varad's sterling advice. It still doesn't work,
so my current guess is that something has changed when Apex went to its new version.
Can anyone point me in the right direction regarding Image problems in version 4 ?
I guess I'm not the first to experience such issues, and a checklist of things to try would
be most welcome.
I've done a View->Source on the page that doesn't work, and the issue with a missing value
for the "d=" parameter on the apex_util.get_blob_file seems to have recurred:
src="apex_util.get_blob_file?a=130&s=1718106956127950&p=13&d=&i=25615931827270369&p_pk1=5&p_pk2=&p_ck=947078FC54BB5126E7E0D19F8A24C416"
Suggestions welcomed please; thankyou in advance.
Mungo

Hi Folks,
I've found a solution to my "image" problem that caused this thread, hence the decent thing is to
post it here.
I read various other threads and stumbled across:
PDF viewing with apex_util.get_blob_file_src not working with 4.0
PDF viewing with apex_util.get_blob_file_src not working with 4.0 &# 4404695
That thread mentioned the requirement for an "Automated Row FETCH" process as well as having
an "Automated Row PROCESSING" process too.
I had the latter, but didn't have the former, so throwing caution to the wind I tried adding a dummy
Automated Row Fetch process and the damn thing worked!
Haven't got a clue why on earth either of these are requirements on a page that is selecting data
from the database - I don't understand where such processes are called in the big scheme of things.
That's just me baiting some kind soul to spell out the fundamentals for this idiot... please?
Happy to be corrected on any points.
Regards until the next crisis...
Mungo :-)
P.S. How come there is no reasonable way to get the URL of a single post in a thread - I'd like to give
reference to the single post that helped me, but all I seem to be able to get is the whole blooming thread.
Suggestions?
Edited by: MungoHenning on Sep 15, 2010 1:39 PM

Photosmart D110 All-In-One Printer - Shadow image problem

I have been having a problem with this printer, ever since we purchased it about 2 months ago, where it will print a shadow image of text or pictures on some documets but not others. It is specific and consistent in that it will print this shadow image on some documents every time and on other documents none of the time. I have a PC and a Mac and it doesn't matter which computer I use, only which document. Sometimes it is only a part of a document, like the computer generated part of an email where it says " this person at this time on this date wrote.." but the other text will be fine. It happens on some coloring pages but not others. I spent 2 hours on the support line yesterday; it's still doing it. She had me unplug it, take off the printer software and reinstall it, update software (on my Mac) and it did not fix it. Any ideas on what may be causing this & how to fix it? I like the printer but am about to return it because of this problem. The printer we had been using was an HP C4280 and did not have this problem. I'd like to keep the printer if I can fix this problem.

I'm having the same shadow imaging problem on my Deskjet F4580, so if anyone knows how to correct it please post.. I've reinstalled/updated the driver, disabled advanced features, and deslected "Enable HP Real Life Technoliges".

Persistent Image problem

Okay, I just had the screen on this iMac replaced because of this problem with a dark line at the top of the screen. The screen has been replaced, and the dark line isn't there anymore. However, I am now having persistent image problems. This is noticeable when I use the Aurora desktop. If I have a window open (e.g. Safari) for a long enough time, and then I X out of it, I will see a shadow/ghost of it. It's most noticeable with a dark background. However, I DID change some of the settings in "Appearance," so I wonder if that might have done it. But I can't see a way to change everything back to default. Do you know if there's a way?

Hi again - a couple of ideas:
If you haven't printed the images or a while, it could be that you prepared them under a previous version of the Aperture raw and they've since been reprocessed, resulting in a slightly different look
I had an occasion about 12 months ago when an update to the Epson printer drivers caused me to have to go back and change my print setups in Aperture, due to new colour interpretations. Don't know why, but it happened... maybe your settings have changed since last printing?
Could be that you did or didn't have the appropriate soft-proofing turned on - are you using this feature?

Strange short-term persistent image problem

Hello,
I'm well aware of the typical image persistence problem, where an image can stay "burned in" after the monitor displays the same thing for hours on end.
I have a much shorter-term persistent image problem. Let's say I open a web-page, leave it open for 10 seconds and then open a new window in Safari (thus getting a pure white page). Well when that happens, the previous web-page is still shadowed on the new white.
30 seconds later it has faded, but then the same thing will happen again with anything else that's displayed.
Any ideas?
thanks
Loa

Huh, now I'm really stumped. The cyan border is also present in FCE once I render, but it doesn't seem to happen for each instance when the paper image is used. Did you import the paper image as a .gif or something else? And did you add any filters to it? Did you also add any effects? The only I'm using with the paper image is the page peel and I have not tried any other effects to see if the cyan effect comes up.
I've put a screen capture of my FCE project showing the cyan border present in the canvas as my movie is playing. Its on my idisk as FCE movie problem.tiff
http://idisk.mac.com/gindacu-Public?view=web
Thanks again for the help.

Passwords and images problem

Firefox image problem. In Firefox 3.6.12, every time I save an image that's already displayed on my screen, I see "one active download" appear in the bottom right of Firefox's window and the same image is also listed in downloads. The problem is that Firefox doing that uses more bandwidth. How do I set Firefox so that when I save an image, instead of that image getting re-downloaded from where it's stored on the internet, it's copied from wherever Firefox has it stored to display it so Firefox doesn't use as much bandwidth? Tools/options/advanced/network/offline storage is set to 50mb.
Firefox password problem. Tools/options/security/passwords has "remember passwords for sites" checked and there is nothing in my exceptions list. But Firefox keeps forgetting passwords, usually after restarting Firefox and or my whole system and on some sites, I don't even get asked "do you want to remember..." How do I fix this?
I do have CCleaner and it's set to run at startup, but all the boxes for Firefox are unchecked, so it's not the cause of either problem.

@cor-el
OK, I'll give that extension a try and see what happens, thanx! :-)
@venemovil
I right click and either select "save image as" or if I want to save an image to more than one location, I select "view image" and then use ctrl+s. Both results in Firefox re-downloading the image as I described above. It happens on every site I visit.
The password problem never happened before, but I will try disabling my extensions one at a time and see if it happens only whan a particular extension is turned on.
This is a screenshot of the extensions I do have installed.
http://i273.photobucket.com/albums/jj216/Moonbarker/Clipboard01.jpg
I've also noticed that Firefox is forgetting what sites I've visited recently (I type in part of the url of sites I've visited sometimes as recently as a few hours ago and the entire url isn't in the suggested list) and I keep having to put the Fire FTP Button back in the toolbar (next to the home/stop/reload/back-forward buttons). That may be related to the pasword problem. I don't know.

Website images problem

Hi there,
I installed the latest version of Firefox. However, some websites I'm having some image problems. For example http://www.e-masifpanel.com web site with a phone number in the upper right corner of the space. In this area the way it looks on my Firefox browser line. I remember the moment some photos do not appear on other websites. Does version issue or problem, a problem with my my settings be? Thank you.

Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong

Video image problem

Hi...A neighbor has a iMac G5 and has developed a video/image problem. The iMac boots up and sometimes shows an ok screen for a little time, sometimes not. What emerges is an array of digital black on white graphic line images (maybe I should upload a picture), but makes the screen virtually impossible to see what you want to view, thus rendering the computer useless.Any thoughts as to what this is, seems like a hardware vs, software issues, but can't say for sure. What might it be: video card, other hardware on or attached to the logic board..and mostly could it be repaired (by self or reasonable). Any and all thoughts or experience welcome as I've been no help to my good neighbor friend on this one:)..Rick

me 2 it's clear .. the new firm has poor quality than the original one...sadly .. my n93i now has quality like n70 help!!!!!!!!!!!!!!!!!!!!!

Imaging problem LR 2.7

Has anyone seen this issue arise on images that were imported ok, then all of a sudden Lightroom image rendering will only do this?
The source file appears okay as this does not happen when viewed with alternative viewer programs. However, the exports usually (not always) also look like this.
What is this imaging problem called?
I've never had this issue before, but it's started to occur with frequency ever since I've moved... only mystery is: I have all of the same equipment including camera.

folks thanks for all fo the advice, but... I think I've discovered the problem: VISTA + External Hard Drive = Picture and file corruption
I should have known: the problem is MICROSOFT!!!!! For the first time in my life, I thought seriously about switching to Apple (but then I would switch to Aperture).
Here are the old discussions. Given the dates on these, apparently, I must be a rare person left on Vista.
http://www.vistax64.com/vista-music-pictures-video/136646-image-corruption-using-external- drive-vista.html
http://social.technet.microsoft.com/forums/en-US/itprovistadeployment/thread/6ffcb5b7-ac72 -49ab-9a89-77e730db75b2/
So 3 external hard drives tested with the entire set of nearly 400 GB of pictures, videos and files.
All showing varying degrees of picture corruption, and now I've discovered video corruption as well.
My problem is, I deleted the original internal hard drive files, so I'm left with only one 1st copy, the other two are copies of copies and worse off.
I'm taking the leap.... upgrading to Windows 7 tonight. I'll let you know what happens.

Macbook pro retina ghost image problem

I have heard about the burn-in problem on macbook pro retina display especially on LG screen. After I got my macbook retina for 3 months, the ghost image problem become really really unacceptable. After 4~5mins, the image on screen will burn in obviously for quite a long time. IT IS VERY OBVIOUS!! So I drop by apple store and find a genius, he did a persistence test on my macbook. The test is under a very low brightness, and I can not even know how he was operating. After 6 minutes, he said there is no burn-in problem. He explained that, if my macbook pass the test, it means my screen is within inspection. But I can tell if this screen is good, APPLE you should take a look at your inspection and change it RIGHT NOW. Everyone of my friend who have seen the problem on my screen says it is unacceptabe, how can it be within inspection? If anyone need a photo of that, i will provide.

MoonnooM wrote:
I have made an applecare call appointment. I'll post the result after I make the call. Thank you.
Good work...
Back-up all your data.
If they replace your MacBookPro, you can avoid a service charge for runniing the back-up for you.

Macbook pro retina with ghost image problem

Can i claim my retina display that have ghost image problem?

Hi there, I had the same problem with my Macbook Pro 15`` Retina. And here is how you can find out if you have ghost image problem. There are two retina display manufacturers for Macbook Pro Retina`s LG and Samsung. And if you are luck you will have the Samsung Retina Display on your mac. Here is how you can find the manufacturer for you Macbook.
Go to your Applications folder and launch Terminal. Paste in the following and hit return:
ioreg -lw0 | grep "EDID" | sed "/[^<]*</s///" | xxd -p -r | strings -6
Look at the beginning of the second line to see which manufacturer made your display. If it starts with LP then you have an LG display. Samsung displays start with LSN.
If your display shows LP you might have this problem for sure. So here is how you can test your screen.
A simple test to check your Retina MacBook Pro display for image retention also reported as "ghosting"
http://www.mitchmalone.name/retina-test/
Run the test for 10 Min. and you will find out if you have this problem.
And if you have it, and if you are still under waranty the Apple will replace the display with Samsung for free of charge. I hope this information helps.

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns
Hi!
I've tried to modify the example of "multiple geometric patterns matching" , and just use two patterns, but when I run the VI this error appear and I doon't know how to solve it! , the error appears in the "IMAQ Learn multiple geometric patterns" block.
Running on:
- labview 32 bits
- windows 7 64 bits
- usb camera 2.0
Any sugestion would be helpful..... ! Regards
Attachments:
template_12.png ‏150 KB
template_11.png ‏123 KB
vision_multiple_pattern_matching.vi ‏127 KB

thanks all for your replies, the problem was on my template images, I had to give them information about the pattern matching, and I did it with NI Vision Template Editor, within Vision utilities, and I chose template with Feature Based.
Thank you again and Regards!

Multicast WDS Imaging Not Working - Doesn't show up when booted via PXE..?

I have a lab environment setup specifically for imaging laptops via WDS. I have a stand alone Windows 2012 server connected directly to an 8-Port Cisco SG-220 8 Port switch. Nothing else is connected to this server and it is not being
used for anything else. The server is running DHCP and WDS. I can boot laptops via PXE and connect to the WDS server to deploy the images through standard WDS imaging. However, I have not been able to get Multicasting to work. I
have never used Multicasting before and have read through the documentation but must be missing something. This is what I've done:
1. In the WDS server I right click on my deployment image and select 'create multicast image' then go through the prompts to create an auto-cast image.
2. The Multicast image is created and shown as 'waiting' on the WDS server.
3. The Cisco router is brand new out of the box, the only configuration I did was to enable IGMP snooping. I did not make any other changes to the setup of the switch.
4. I boot a target machine via PXE using the same Boot Image that I always use. It loads to the screen where I can select the image I want to deploy but it never shows the multicast image as an option. I only see the regular image I had previously
been using.
I'm not sure what else I'm missing in order to get the target machine to connect and image using the multicast image.
Here are a few screen shots of what I have setup:
Here is the multicast image created on the server
Here is the Cisco Router configuration:
Here is the NIC card configuration on the server:
This is the target laptop booted via PXE but it never shows the multicast image as an option.
/>

Hi AdamNYC31,
The multicast feature used by WDS uses Internet Group Management Protocol (IGMP) version 3. Your network switches will need to support this, and you’ll need to configure them
for multicast. Please refer the following similar thread check each step Aaron Tyler and Ron St and Ankit Oberoi offered solution.
Multicast issue: Always "Waiting"
https://social.technet.microsoft.com/Forums/windowsserver/en-US/18122b39-e707-455d-b22f-956ebfb95e40/multicast-issue-always-waiting?forum=winserversetup
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

WDS PXE Problems on 1 model of PC only - The following Client failed TFTP Download - Error Code 1460

Hey all,
I am experiencing a problem with my WDS PXE Environment, with 1 specific model of PC's only. This is a Dell XPS machine with an Intel e1000 nic in it.
The problem is that when you PXE Boot, it starts off fine, and I reach a menu that has all of my boot images listed, but as soon as you pick one it hangs on a black screen.
From the event viewer on the server I can see the following entry:
The Following Client failed TFTP Download:
IP: 10.130.148.211
Filename: \Boot\Boot.SDI
ErrorCode: 1460
I've done some google searching and found some topics that could be related, but none of the fixes mentioned helped me. This is the one I tried:
http://social.technet.microsoft.com/Forums/en-US/winserversetup/thread/a1246f62-6a8a-482b-9323-7e02dfeab196/#52aaf6fb-9494-4327-bbc3-8afe3e78905c
The problem I had was that the link they gave to the Hotfix, doesnt actually have anyway to download the hotfix!!
http://support.microsoft.com/kb/975710
Although
I am not convinced that packet size is the problem here, more likely some network or disk controller driver issues??
No
idea at all where to go from here. It is only this one model of PC that fails, and all others work fine. If someone can point me in the right direction it would be very greatly appreciated.
I
would be happy to provide you with any additional details you may require.
Thanks,
-Ben

You need to contact CSS to get this fix.
Hotfix Information
A supported hotfix is now available from Microsoft. However, it is intended to correct only the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore,
if you are not severely affected by this problem, we recommend that you wait for the next Windows Server 2008 service pack that contains this hotfix.
To resolve this problem immediately, contact Microsoft Customer Support Services to obtain the hotfix. For a complete list of Microsoft Customer Support Services telephone numbers
and information about support costs, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
John | Program Manager | System Center Configuration Manager

WDS Image Problem

Similar Messages

Maybe you are looking for