WE ARE HAVING PROBLEMS SUBSCRIBING EVENTS IN INTERCONNECT.

Hi all,
We have installed the Oracle DB Adapter and Oracle Applications Adapter to test publishing and subscribing events with different adapters. We have designed two new test. One publishing a message with the Oracle Applications Adapter and subscribing it with the DB Adapter. The other publish the message with the DB Adapter and subscribe it with the Oracle Applications Adapter.
None of the subscribing procedures have worked. The two publishing events have
sended the messages correctly to the hub and there are still stucked there. The message is never subscribed by the event we have defined
on the iStudio. It is left on the hub message list forever and is no able
to push it out.
Questions:
- Is there any procedure to push the messages through the InterConnect Hub?
- Does customer has to create any recurring application procedure to pool the InterConnect Hub to push the messages left there?
Can everyone help us with this?
Regards,
Francisco Javier Guzmán

What does the subscribing adapter log file say?
Are there any issues reported on the OAI_AGENT_ERROR table in the hub?
Have you created the subscribe packaged procedures on your target database?
•     In iStudio, click on 'File', 'Export PL/SQL'.
•     Expand 'Applications', '{YOUR_SUBSCRIBING_ADAPTER}' and 'Subscribed Events'.
•     Highlight the 'Subscribe' Event.
•     In 'File Prefix', browse or enter the output directory, plus a prefix if required
•     Press 'OK'
•     You will see 'Operation Complete Successfully'
•     Use Windows Explorer, and go to the directory you selected. You will see a file called "[PREFIX]_YOUR_SUBSCRIBING_ADAPTER}_[Sub_Event_Name].sql"
Run this sql script on the subscribing system, under the user you are using to connect in the Subscribing adapters adapter.ini file. This will create the subscribe procedure.
Stop your adapters. Clear out any metadata. Start your adapters.
Try again.
Also, the name of the Application in iStudio must be the same as the application name configured in the adapter.ini file.
HTH
Yan
P.S. send me a email to [email protected] with the subject of "Simple", and I'll send you a worked example of a simple DB to DB publish and subscribe.

Similar Messages

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Indesign CS6 on MACs with OS 10.8 are having problems with links

Hi
Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
Any further information required?
M. Miller

Thanks for your quick reply.
We actually noticed that there also seems to be something wrong with the timestamps:
If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
Have you heard anything similar?

We recently purchased the iphone5 (2) and are having problems with sound coming thru the earbuds when we plug them in to the iphones. works fine with the ipad. help please

recently purchased the iphone5 (2 of them) and are having problems with the earpods. no sound when plugged in to the iphone. both phones. works with the ipad. help please

Hi P5052,
Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
It is very unusual that neither phone is working with the new earpods.
Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
The article below will give you the basic troubleshooting steps for this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Can't hear through the receiver or speakers
Symptoms
When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
- Judy
<Edited by Host>

We are having problems sending iMessages we have reset but still having problems. Also Icalls cutting off.

We are having problems sending IMessages they are not sending have reset but still having problems. Also calls are cutting out or not connecting

This is a known issue with Apple. I can't sent iMessages either...It' doesn't matter how many times I power down my phone, delete messages or disconnect from wifi...Very frustrating.

We are having problems pushing push adobe reader install and updates via Microsoft deployment

We are having problems pushing push adobe reader install and updates via Microsoft deployment. We issue is with our mail server. We cant open PDF within outlook.
Cliff Butler
Coastal Connection
www.coastal-connection.com

Hi ccbutler,
What is the current version of Acrobat/Reader installed and what is the version of Outlook installed.
Was it working before if yes do you have idea when did problem started.
~Ajlan Huda.

The answer why Best Buy and other places are having problems...

Blame LG Display. Looks like the Retina Display is having problems in production.
http://news.cnet.com/8301-13924_3-20008149-64.html?part=rss&tag=feed&subj=iPhoneAtlas
"The shortage of iPhone 4s as launch day approaches is due to limited supplies of the new Retina display, according to an industry analyst's report. CNET quotes Ashok Kumar, managing director and senior technology analyst at Rodman & Renshaw, as saying that a "production bottleneck" in the IPS LCD screen may continue to late summer. Meanwhile, customers continue to report emails from AT&T telling them that their iPhone 4 pre-orders have been canceled.
In the snowballing EPIC FAIL that is the iPhone 4 rollout, there has been a lot of blame to go around. Server issues were responsible for delay and confusion when the new iPhone first went on sale last Tuesday, and AT&T stopped taking orders early Wednesday due to overwhelming demand. As the rush continued, black iPhones were no longer available for launch day, with ship dates pushed back first to July 2nd and then to July 14th. White iPhones are reported to be delayed to later this summer or even to 2011. It's unclear how long third party retailers will have to wait for supplies, as neither RadioShack nor Best Buy is saying when they will have iPhone 4s in stock. An AT&T rep told a MMi user that Best Buy will not have any iPhones by launch day.
Kumar wrote in a letter to his clients that his "supply chain checks indicate that our earlier monthly shipment estimate of 4 million units have been reset by about half," blaming difficulty with the LCD manufacturing at LG Display, which makes the Retina display for Apple. By late summer, according to Kumar, LG will have upgraded their plants to new fifth-generation technology that will allow them to cut more screens from larger panels.
Apple will probably do fine if they can get supplies up in a few weeks: many if not most of the people who have placed pre-orders will want an iPhone 4 and onlyan iPhone 4. If shortages continue, though, expect increasing numbers of potential iPhone buyers to start looking at other high-end smartphones like the HTC EVO and the upcoming Droid X."
-ModMyi.com

Which is why, as I stated in a previous thread, that Apple should have had on-hand a minimum of 3 million units before even announcing the darn thing and the so-called "pre-order" window should have been open for a month. That would have given them time to move the existing units and be producing more. I love Apple, but what kind of amateur-hour-fisher-price-my-first-product-launch has a one week pre-order window before launch without having a clue as to how many units they would move on launch?

How many of us are having problems with accessing web pages?

For five days I have been having problems accessing web pages, constantly getting the message
Safari can't connect to server etc. etc. It takes me ages just to get to one page without permanently returning to the previous one & trying again. I have tried to use these support pages & find it increasingly difficult to just open a page let alone post anything. If this works I'll be amazed!
I have checked with my ISP - British Telecom. who say there have been a lot of "worms" & 'viruses" across the internet in the last week. Has Safari been contaminated or is it just the www that is the problem? Has anybody at Apple investigated this problem?
I am getting increasingly frustrated by the whole thing as nobody seems to come up with a viable answer. Even if Safari is at fault it would be nice to know where we stand & that somebody is trying to do something about it!

Thanks for that suggestion petitbjs. I think all is OK now. It started without warning, I hadn't changed anything, I just tend to use everything on the computer as it came, I'm a bit chicken to change anything incase I mess it up!!
Starman et al,
I had to phone BT this evening when I found my internet wireless phone wasn't connecting when I dialled out, it was the same yesterday evening but as I was trying to phone my son in Rio & was expecting him to move house at any time, I thought he might have had the phone disconnected, or it was just something wrong their end as I had the dialling tone OK & assumed the phone was fine. I have been using the landline, both of which go through the Home Hub, all through the last week without any problems.
Eventually the BT man had me unplugging the Hub from the mains whilst holding down the Wireless Association button, after which it was OK, however during all this (apart from when it was unplugged, obviously) I still had uninterrrupted internet service as I had to log into the BT website to check the configuration or something, & the chap seemed to think the phone's hub problem would have had nothing to do with my internet problem over the past few days.
Anyway, things seem to be fine now, I'll just hope it stays that way but at least I can try the unplugging trick if I have similar problems in the future.
Once again, thank you all for your help & suggestions, it is a great comfort to me knowing that I have these boards to call on for assistance on virtually any problem I have with my Mac. Before he moved to Rio I could cry "Help" to my son too, hopefully once they move & get set up with an internet connection next week we will be able to video chat (the whole reason I bought the new Mac!).
Many thanks to all,
Carol.
Wippitwalker

My iMac and Netgear Router from Sky Broadband are having problems

Hi, I've got a fair amount of knowledge in these area's. I not long switched to Sky Broadband a couple of weeks ago. The problem lies with the connection to the router that they supply for their service, a Netgear DG834GT. The problem is that my connection to the 802.11g network is extremely slow.
My iMac, even tested in the same room shows 20-30% signal. This compared 2 a Windows Vista laptop at 5bars and top speed downstairs, and two PC's (XP) either end of the house with the same normal signal quality.
Contacting Sky Broadband, they assume that the fault is with the iMac and are state that they can't really help because I am not using a wireless adapter supplied by them (If it's even compatible).
Does anyone know the solution to this? I've heard of many other users with similar problems on different Mac's but no-one seems to have a fix.
Also running bootcamp, ive found my signal strenth to me maximum, but my speed to still remain at 22Mb/s peak, and roughly 1-2Mb/s when browsing the internet.
Lastly I have WPA-PSK enabled, and i've tried adjusting wireless channels without having any luck improving the signal. I would be gratefull if anyone knew any ways to fix this problem, thanks
IMAC INTEL CORE 2 DUO Mac OS X (10.4.8) 1GB RAM, 256 RADEON X1600

Buy the Wireless N adapter from Apple and install it. Even though the only specified effect is adding the N router capability, it fixes the problem you mentioned (worked like a charm for my friend).
Chuck
eMac Mac OS X (10.4.8) 1.42Ghz PPC G4

It looks like the way forward is to delete any apps you are having problems with and reinstall hopefully you have your data on iCloud this seems to work

Looks like deleting and reinstalling the apps your having the problems with works in some cases

Hi Flash, Just some info to correct yours. First, not everyone is having a problem with FP 10.1 and there are solutions and reverting to FP 10.0 would not be the first choice. If that was for you, that's fine. If you would read the many many threads here, you would find correct information for users that want to revert back to FP10.
Also may I suggest you read up on Firefox version 3.6.6 as this is involved sometimes with FP 10.1.
Lastly, I think it is always better to find out what a user's issues are before offering a solution. Reverting back to FP 10.0 is not for everyone that is having a problem nor should it be.
If your instructions solved whatever problem you were having, that's great. However, to recommend this to other users that come here for help without knowing what their problems are may not be the best advice, in my opinion.
There are many other details in the Uninstall Instructions and also the Install Instructions that need to be followed.
That is why it is better for each user to have their own thread and receive help for their individual issues. This is also based on their computer system configuration.
Believe me, if there was one fix for all FP 10.1 or any other version issues, it would be posted
Thanks,
eidnolb

HT5628 I have OSX 10.9.1 on my iMac and want to install Windows 8.1. I've read that people are having problems with 8.1. What should I do?

I'm getting ready to partition my drive and install Windows. I've read that there are wifi and other problems with Windows 8.1. That I should use 8.0. Microsoft does not sell 8.0 anymore. They want you to buy 8.1. What should I do? Any help would be appreciated.

Read the Boot Camp Help first. Boot Camp does not yet support Windows 8.1 http://windows.microsoft.com/en-US/windows-8/system-requirements. If you insist on installing 8.1 use a virtual machine like parallels, Fusion, or VirtualBox.
http://www.apple.com/support/bootcamp/

To those who are having problems with itunes after installing new itunes!

i found this solution in another post after much searching. thank you to whoever posted this i didnt write down your name. if you follow step by step it actually works! ty so much mystery person!here is their post:
+**So after contacting apple, heres the solution. Make sure u do all steps, and do both.**+
+**Completely Remove iTunes and QuickTime (Click for more)**+
+**Note: Songs you purchased from the iTunes Store or imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.**+
+**Quit iTunes.**+
+**On the Start menu, click Control Panel.**+
+**Windows XP and Windows 2000: In Control Panel, open Add or Remove Programs.**+
+**Windows Vista: In Control Panel, click Uninstall a program. Alternately, in Classic View of Control Panel, click Programs and Features.**+
+**Select iTunes from the list of currently installed programs, then click Remove or Uninstall.**+
+**In Windows XP and Windows 2000, when asked if you would like to remove iTunes, select Yes.**+
+**In Windows Vista, if your permission is needed to continue, click Continue.**+
+**After uninstalling iTunes, do not restart if you are prompted to.**+
+**If other entries were present for iTunes remove those as well.**+
+**In Add or Remove Programs or Programs and Features, remove any iPod Updater applications that are listed in the same fashion as iTunes was removed.**+
+**In Add or Remove Programs or Programs and Features, remove any QuickTime installations that are listed in the same fashion as iTunes was removed.**+
+**Restart your computer.**+
+**After the computer restarts, open Local Disk C: in My Computer/Computer or whichever disk programs are installed on.**+
+**Open the Program Files folder.**+
+**Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if iTunes was successfully removed in steps 1-8.**+
+**Right click the iPod folder and select Delete a nd choose Yes when asked to confirm the deletion.**+
+**Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion.**+
+**Delete the QuickTime and QuicktimeVR files located in the C:\\Windows\\system32**+
*folder.*
+**Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.**+
+**Restart your computer.**+
+**Install the latest version of iTunes from http://www.apple.com/itunes/download.**+
+**Empty your Temp directory and restart (Click for more)**+
+**On the Start menu, click My Computer/Computer (or double-click My Computer on the Desktop).**+
+**In My Computer/Computer, open Local Disk C:.**+
+**Windows XP and Windows 2000: Open Documents and Settings.**+
+**Windows Vista: Open Users.**+
+**Double-click the folder that bears your username.**+
+**Windows Vista only: If you see an AppData folder, double-click it and skip to step 12. If you don't see an AppData folder, skip to step 9.**+
+**Windows XP only: If you see a Local Settings folder, skip to step 12. If you don't see a Local Settings folder, proceed to the next step.**+
+**Windows XP and Windows 2000: From the Tools menu, choose Folder Options.**+
+**Windows Vista: From the Organize menu, choose Folder and Search Options.**+
+**Select the "Show hidden files and folders" button.**+
+**Click OK.**+
+**Double-click Local Settings or Local folder (If on Windows Vista, you must first double-click the AppData folder). If Windows needs your permission to continue, click Continue.**+
+**Right-click on the Temp folder and on the shortcut menu, choose Delete.**+
+**In the confirmation dialog that appears, click Yes.**+
+**If you are unable to delete the Temp folder, close all programs, especially those in the Notification area (system tray) of the Windows Task bar shown below and repeat step 10.**+
+**Restart your computer.**+

*UPDATE Cityslacker121 is the MAN!!! He posted in this forum http://discussions.apple.com/thread.jspa?threadID=1165261&tstart=0 that had a link to this http://www.daitengu.com/2007/03/23/howto-fix-the-missing-itunesmsi-problem-on-wi ndows/
the fix is in a link on that page to a windows utility that removes all install info about what ever program is giving you problems so you can run the uninstaller.. The utility is on this page.. http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
Sorry for all the links...

Since I upgraded FireFox to 3.6 the majority of my websites are having problems correctly displaying information. This is not happening in Chrome, Safari or IE8.

The new version of Firefox appears to have display problems on both input fields and control button fields. The wording and button are completely out of alignment

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
See also:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong

Having problem with Event function in Photostream

Since the upgrade I find that the event function is no longer separating my uploaded photos by date of taking them so they are now all in one bucket so to speak instead of each day of the holiday. Why has this happened and have others had a similar issues?

Hi Markus,
If I understand it correctly then you have a dropdown box and on the basis of value selected in dropdown box you need to filter the records displayed in the table view below...
If this is the requirement then you will have to write your custom code to filter data. For your dropdown field redefine get_p_xxxx to add a server event once the value is selected in dropdown box.
Please refer to:
Re: Tableview - get changed data event???
Since server round trip would be triggered you can loop on data from your context and filter it in do_prepare_output or else you can create your event handler as well...
e Regards,
Bhushan

I bought a new MBA and are having problems with HDMI and VGA port

Hi,
I just bought a new mac book air, and at the apple stre they recommended me a mosh mini to vga cabel. I need to use my computer for projector either hdmi or regular vga adapte. The new mba only has thunderbolt, usb, memory/card slot, microphone and headphone ports.
Does anyboody has and idea how i will or how do i connect the hdmi or vga adapaters to the computer. I have been searching on the cables the apple store has available but the end that goes into the computer is not compatible with the ones I mentioned above.
Please any help would be of great help, because I dont know what to do. I think this is a problem with the new MBA.
thank you,

Thank you doubr. So what I need is to buy the thunderbolt cable and the minidisplayport to vga adapter or the griifin mini display port to hdmi tht toothpickproductions recommends, is that correct?
The one I have is a mini dvi to vga adapter and the end that goes into the computer is the same one that the minisdisplayport to vga adapter or the griffin one have, and is too big to go into the new mba. I dont know if I am confusing you more with what I am saying.
check the link below and you will see the ports the mba has
http://www.apple.com/macbookair/specs.html
if you see the ports that mba has, the two minidosplayport that are recommending do not fit..
So, do you know that if I buy the thunderboldt cable will either of the two minidisplay ports fit or I need to buy another adapter for the minidisplay ports??
thank you because I am kind of confused, I did not have this problem with the macbookpro I had before...

WE ARE HAVING PROBLEMS SUBSCRIBING EVENTS IN INTERCONNECT.

Similar Messages

Maybe you are looking for