(We are using Dreamweaver CS6 on a Mac) We have been able to update our monthly magazine website with no problems through October 2014, but we suddenly could not "put" updated pages online beginning last month. I get an error message: "An FTP error occurr

When I saw this, I clicked on “Check Browser Capability” and I got this result, showing several identical red flags: “• 47 Extra Whitespace in List Links Bug (If a link with display: block and no explicit dimensions is inside a list item, any spaces or linebreaks that follow the list item in the code will cause extra whitespace to appear in the browser. Affects: Internet Explorer 6.0. Likelihood: Very Likely.”
I should add that no adjustments were made to the site before it stopped working. Is there a bad code that might have gone in during an automatic update?

It's pretty unlikely that a code issue (what that check compatibility is looking at) would cause your FTP to stop functioning. That compatibility tester is essentially outdated junk anyway. The 6 people left on the planet that still use IE6 won't mind if your site doesn't look right, nothing does to them.
It's not unusual for certain hosting companies, GoDaddy is a good example, to simply lose your FTP credentials after a server update, which would cause the FTP error you are seeing.
Check with your hosting company and verify your FTP settings are correct.

Similar Messages

How can get Dreamweaver to stop error message: an ftp error has occurred- cannot connect to host?

Dreamweaver is locking me out when I try to connect to the host via ftp. I get the error message: "An ftp error has occurred - cannot make connection to host". This error message started yesterday when I used the wrong host ftp address too many times. I have since received the correct ftp address from my website host, but the system won't even let me log in...it just gives me that error message when I click the connection button on the panel. My website host recommends that I uninstall Dreamweaver and re-install it again. My concern is, if I un-install the Dreamweaver app, which I downloaded from the Cloud, will the Cloud know I've un-installed Dreamweaver and allow me to download it again? Please help.

See my response in your most recent thread. Please don't double post like that - it can confuse things considerably when replies come in to both threads.

HT201359 I have 5 times charged on my credit card to get Itunes on my Ipad but finally I could not access the Ipad and how I can be get refunded the extra charge

I have tried to use my app store on IPAD, its requiered registeration and entering my Credit Cards Details In UAE. Its charged me 5 Times and still I could not get Itunes. Any one can help how I the extra chrges can be refunded.
Thanks

Those are most likely authorization holds and they will eventually fall off the account without charging you any money.
iTunes & Mac App Store Authorization Holds -
http://support.apple.com/kb/ht3702

Error message: an ftp error occurred - cannot make connection to host. ...not authorized to make the connection due to local firewall

I am currently using windows 8.1 and also have a norton antiviurs software installed.

Have you disabled your Windows Firewall?
You should also download and install (free) Filezilla, and see it it works for you.
Always good to have a backup FTP program.
I assume you have toggles the active/passive etc. settings

Use properties to get character in file but some char could not be decode

i use properties class to get a file with Big5 character inside the file, but some character could not be display properly.....
sample code:
import java.io.*;
import java.util.*;
public class Frankie {
public static void main(String[] arg) {
try {
Properties p = new Properties();
p.load(new FileInputStream("file.ini"));
Enumeration e = p.propertyNames();
while (e.hasMoreElements()) {
String name = (String)e.nextElement();
String value = p.getProperty(name);
String coded_value = new String(value.getBytes("iso-8859-1"), "Big5");
System.out.println(name + " : " + coded_value);
byte[] bBytes2 = coded_value.getBytes();
for (int k = 0; k < bBytes2.length; k++) {
System.out.println("byte " + "iso1" + "[" + k + "] = " + bBytes2[k]);
catch (Exception e) {
e.printStackTrace();
==================
file.ini
people=你
a=餐
==================
result:
a : ?
byte iso1[0] = 63
people : 你
byte iso1[0] = -89
byte iso1[1] = 65
==================
the proper byte of "餐" should be (-64, 92).....
If i use a varible to store this character in the source code, and use value.getBytes("big5"), the byte could be properly display for this character....
how can i solve this? thanks a lot!

The Properties class javadoc says
The load and store methods load and store properties in a simple line-oriented format specified
below. This format uses the ISO 8859-1 character encoding. Characters that cannot be directly
represented in this encoding can be written using Unicode escapes ; only a single 'u' character
is allowed in an escape sequence. The native2ascii tool can be used to convert property files to
and from other character encodings.
which means you are not supposed to use "big5" encoding in your Properties text file
directly. There is a commandline tool "native2ascii" bundled with your jdk package that
you can use to convert your "big5" encoded Properties file into unicode escapes based
text file, then you no longer needs to play the trick
String coded_value = new String(value.getBytes("iso-8859-1"), "Big5");
p.getProperty(name) will give you exactly the correct "value" defined in your properties
file.
-x
btw, when using "native2ascii", if you are not in a "big5" env, using "-encoding big5" option
to force it.

Error message: internal data error

Dreamweaver CS5 worked perfectly until this morning, when I keep getting error message: An FTP error encountered, cannot link to host. Encountered an internal data error. What's happening?

The full error message reads: “An FTP error occurred - cannot make connection to host. Dreamweaver encountered an internal data error. Please try the operation again.”
I called Network Solutions, who is the host. I opened the Site/Manage site/hiddengardensteps/edit and found the material. I then clicked the “servers” which gave me a box with FTP server and password. The Network Solutions techies told me to change the password, which I did, and the second NS person told me to wait 15 min - 4 hours for the syncing to work.
I get the same error massage now for bikenfly.org which is hosted by Earthlink. What to do?
Thanks for the quick comeback.
Liz

I am using dreamweaver cs6 and none of the menu's are showing up like the common, form, layout, spry etc...not sure why?

i am using dreamweaver cs6 and none of the menu's are showing up like the common, form, layout, spry etc...not sure why?

Which version of CC -- 13, 2014, or 2014.1? You'll find it under the Help menu > About DW.
Spry Menus are gone.
Color is something you add with CSS.
Nancy O.

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
Hopefully using the forum someone out there will know the answer.

Using Dreamweaver CS6 with Bitnami WordPress

I am trying to get Dreamweaver setup to do dynamic editing of my WordPress files installed on my desktop with Bitnami.
My Bitnami WordPress Stack is installed to the following link: C:\WordPress\BitNami WordPress Stack\ and the path to the index.php is: C:\WordPress\BitNami WordPress Stack\apps\wordpress\htdocs
To setup Dreamweaver local site, I'm using the following settings: Server Name: Bitnami Connect Using: Local/Network Server Folder: C:\WordPress\BitNami WordPress Stack\apps\wordpress\htdocs\ Web URL: http://127.0.0.1h 8080/ (I've also tried it omitting the '8080/') (I've also tried the Web URL http://127.0.0.1/wordpress/) and, under the 'Advanced' tab, I'm using the Server Model: PHP MySQL for my url http://www.clicksearchmedia.com.au.
My problem is that when I open the index.php file in Dreamweaver's main window (split view) I do see the code on the left side of the page, but on the right side of the page (the 'design' side) all I get is a blank (white) box. When I try to open another page - for example wp-blog-header.php - the same thing happens (code on left, blank box on right).
When I try to open single.php, I get code on the left and the box on right has small symbols stating 'PHP' but no real design is visible and I get an error message on top of the screen that states 'Dynamically-related files could not be resolved because of an internal server error. Retry.'
I have my permalinks in WordPress set to default, as I have read that failure to do so has caused problems in Dreamweaver in other people's installations.
Can anyone help me out? Why am I not getting a dynamic preview?

The only files you should be looking at are the ones in your Themes folder. Everything else is just code fragements. Unless you're very experienced with PHP and more specifically WP programming, you shouldn't touch any of the Core WP files.
I've never used Bitnami. I typically use WAMP for my local site folder & local testing server.
My set up is as follows see screenshots below:
Basic tab:
Advanced tab:
Final screen:
Nancy O.

Problem building record set using Dreamweaver CS6 Cloud Product

I am having a problem building a Results Page using Dreamweaver CS6. I have followed all the steps described in Dreamweaver/Build Search and Results Page Article (multiple times). It seems that when I save the Results page it does not copy the php used to build the dynamic table. In fact when I view the source, I do not see any php code.
Additionally, when I attempt to bind the record set, it also does not accept the Default Value(s). Enstead it gives me a list of all data in the colum(s) chosen for the record set (using Where..LIKE..variable definition).
Any suggestions?
Regards,
Norv

Yes, I will be glad to go through each step. I will also provide code.
Step 1: Built the Search Page by adding Form into exisitng htm page. Used Insert> Form>Form to insert Form area. Then added three (3) text fields using Text Icon from the Form Menu Bar (Classic View).
Step 2: Added a Submit and Reset Button to the Search Page. Again used the Form Menu Bar to create the Buttons.
Step 3: Selecte the <form> tag at bottom of Document Window to point Form to the Results Page (using the Action Box.
Saved page and then began building the Results Page using an existing htm page. Saved the Results Page as a .php document.
Results Page: Here are steps taken to build Results Page (Code will follow):
1/ On the Results Page created a Recordset using the bindings dialog box. Used the Advanced Recordset Dialog Box. In the Advanced Dialog Box I used the Select and Where features to create a Recordset that created a 3 column table (records.County, records.ListPrice, records.PropertyType). In the Variable box I created 3 variables (varCounty, varListPrice, varPropertyType). varCounty and varPropertyType parameters are text (Type) and % (for Default Value). varListPrice parameters are floating point (type) and % (for Default Value). RunTime Value is $_REQUEST["ColumnName"].
Here is the Code generated by Dreamweaver. Note, I am not including the code to access the database, because in all tests I am able to access the table. In fact first time I built the dynamic table, everything worked and I saw the Colum and default value. Have never been able to duplicate that effort. :-)
Here is code:
<?php
if (!function_exists("GetSQLValuestring")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION<6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "defined"
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$varCounty_rslistings = "%";
if (isset($_GET["County"])) {
$varCounty_rslistings = $_Get["County"];
$varListPrice_rslistings = "%";
if (isset($_GET["ListPrice"])) {
$varListPrice_rslistings = $_GET["ListPrice"];
$varPropertyType_rslistings = "%";
if (isset($_GET["PropertyType"])); {
$varPropertyType_rslistings = $_GET["PropertyType"];
mysql_select_db($database_MyDB, $MyDB);
$query_reslistings = sprintf("SELECT records.County, records.ListPrice, records.PropertyType FROM records WHERE records.County LIKE %s AND records.ListPrice LIKE %s AND records.PropertyType LIKE %s", GetSQLValueString($varCounty_rslistings, "text"),GetSQLValueString($varListPrice_rslistings,"double"),
GetSQLValueString($varPropertyType_rslistings,"text"));
$rslistings = mysql_query($query_rslistings, $MyDB) or die(mysql_error());
$row_rslistings = mysql_fetch_assoc($rslistings);
$totalRows_rslistings = mysql_num_rows($rslistings);
?>
That's the code that was generated by Dreamweaver.
Thanks in advance for your assistance

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

Here are three screenshots in succession from trying to perform the color selection:
Dropbox - Screenshot 2015-02-12 14.57.40.png
Dropbox - Screenshot 2015-02-12 15.00.14(2).png
Dropbox - Screenshot 2015-02-12 15.01.00.png

HT5654 I am unable to update latest version of Itune, I get error R6034 C runtime library incorrect. My windows are up to date and I have been able to access itune until today and now I don't have it.

I am unable to update latest version of Itune, I get error R6034 C runtime library incorrect. My windows are up to date and I have been able to access itune until today and now I don't have it.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing.

Slideshow using dreamweaver CS6

Have received advice here and created a slideshow using jQuery Cycle2. Loaded own images and working fine on a dreamweaver blank page.
When I load onto a fill page as a banner heading the slideshow reverts to 3 or 4 separate images. Any ideas please?

Sorry. Should have come back earlier. Any chance you could look at code in
these two attachments and tell me why the' letters for baneer ' works and
yet the identical (as far as I can see) 'using find' doesn't go through any
transition. I think I have followed the three points made below.
Thanks and apologies,
NB
In a message dated 04/11/2013 18:59:39 GMT Standard Time,
[email protected] writes:
Re: slideshow using dreamweaver CS6
created by Nancy O. (http://forums.adobe.com/people/Nancy+O.) in
Dreamweaver support forum - View the full discussion
(http://forums.adobe.com/message/5813956#5813956)

On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

Can you advise steps I might take now? On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

Hi Ringdoc,
Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
Let us know how it goes!
Best,
Sara

(We are using Dreamweaver CS6 on a Mac) We have been able to update our monthly magazine website with no problems through October 2014, but we suddenly could not "put" updated pages online beginning last month. I get an error message: "An FTP error occurr

Similar Messages

Maybe you are looking for