We should can see Portfolio contents in Bridge
Bridge should be the refference for any kind of management and display.
A portfolio is like a folder which contains different files. Bridge should allow us
to look inside. A new kind of view would display the portfolio content and we would
be able to see and open everything without to start Acrobat for that.
Thanks, Michael
Hi SKS -
Thanks for that link - I actually referenced some of the steps in that page without mentioning its URL.
The key problem there is that this step:
chflags -R nouchg /Volumes/{name of your network share}/{name of}.sparsebundle
yields nothing - no response.
Then, the next step:
hdiutil attach -nomount -noverify -noautofsck /Volumes/{name of your network share/{name of}.sparsebundle
Gives me:
/dev/diskx
Instead of something like this:
/dev/diskx Apple_partition_scheme
/dev/diskxs1 Apple_partition_map
/dev/diskxs2 Apple_HFSX
So... it's definitely a little crazy messed up.
instead of:
Similar Messages
-
Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?
Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
AirPort Utility 6.3.1 for Mac - Support - Apple
Then, power off the entire network...all devices...in any order that you want
Wait a minute, then start the modem first and let it run a full minute
Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
Keep starting devices one at a time the same way until the entire network is back up
See if AirPort Utility can "see" the Time Capsule now.
If yes, try another backup. If you encounter an error message, post back with the exact message. -
When i am in Yahoo mail and am opening on an email to open, the email starts to open (I can see the content of the email for a second) and then I get a screen with a message that states 'Whoops! The page could not be found. Try giving it another chance below'. But the email had been there so I don't understand that is happening. This just stated happening about a week or two ago. There is a search bar in the center of the screen and at the bottom of the error page is the following.
Contact us | Why did I get this page?
© 2012 ConduitMake sure that you access the Yahoo mail page via the Yahoo home page and not via a bookmarked link to a specific page.<br />
The latter may include POST or GET data that is no longer valid.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
You can also check for issues caused by extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I just reset my apple ID password and now all the imap folders in Apple Mail are greyed out. I can see the contents, but I don't get whay the folders are all greyed out. Can anyone help? Sorry for the long title on this message...
Assuming this is an iCloud mail account, sign out of iCloud in its preference pane, then sign back in with the new password.
-
ACR 5.7 can see camera profiles in Bridge CS4 but not in Lightroom 2.7
When utilizing ACR5.7 through Bridge CS4 - the cameral profiles are easily applied for my .NEF files (Nikon D300) but when I am in Lightroom 2.7 the camera profiles are not available unless I convert the nef to DNG. I have tried to search the web and these forums but I am unable to locate the answer to my problem:
Why can't I see the camera profiles in Lightroom for my nef files when I can see them through Bridge.. (both running ACR 5.7)
Windows XP xp3
Lightroom 2.7
Bridge CS4
ACR 5.7
Nikon D300 profiles
Thanks for the help.
NGGFor those who might be reading this and having "odd" problems .. my solution was to delete my preferences file.
http://lightroomers.com/replacing-the-lightroom-preference-file/745/
This solved several odd issues I was seeing in my lightroom including the camera profiles.. -
Hi - this may be old hat, but I didn't see this specific case covered in prior threads:
- My (friend's) TimeMachine backup sparsebundle is corrupt (or at least, not mountable)
-- Meaning that when I try to use DiskUtility to repair the disk, no go
-- fsck_hfs doesn't work
- Finder tells me the Macintosh.sparsebundle is about 43GB
- I can still see the bundle's content through OSX command line (see below)
- The sparsebundles are outside of the Backups.backupdb folder (see below)
- I can cat all of the files inside the sparsebundle (although I haven't checked all of the band files... not sure if that would error on a corrupt band file, anyway)
Some background:
- The original TimeMachine files were created on a NAS
- We're now accessing the files on a USB-attached device
- The original machine - a MacBook Air - was running Lion OSX Server (don't ask...)
- Said MBA was stolen & is not available
- So.... this is a perfect storm of events - any help is much appreciated.
Wondering if there's any way to create a sparsebundle volume & then copy all of these files that I can see to the new sparsebundle volume.
I have yet to try any Mac-specific recovery tools.
Here is some possibly relevant terminal info:
Jeffs-MacBook-Pro:TimeMachine jeffme$ ls -la
total 32
drwxr-xr-x 12 jeffme staff 476 Nov 7 18:20 .
drwxr-xr-x 7 jeffme staff 272 Nov 13 13:03 ..
drwxr-xr-x 2 jeffme staff 408 Nov 7 13:35 .AppleDB
drwxr-xr-x 2 jeffme staff 102 Nov 7 13:35 .AppleDesktop
drwxr-xr-x 2 jeffme staff 170 Nov 7 13:35 .AppleDouble
-rwxr-xr-x 1 jeffme staff 12292 Nov 2 18:13 .DS_Store
drwxr-xr-x 4 jeffme staff 136 Nov 7 18:20 .TemporaryItems
-rwxr-xr-x 1 jeffme staff 0 Sep 10 20:29 .backup
drwxr-xr-x 3 jeffme staff 102 Nov 7 17:23 Backups.backupdb
drwxr-xr-x 4 jeffme staff 204 Nov 7 18:20 Desktop
drwxr-xr-x 4 jeffme staff 374 Nov 7 17:23 Macintosh.sparsebundle
drwxr-xr-x 3 jeffme staff 102 Nov 7 18:20 Network Trash Folder
drwxr-xr-x 3 jeffme staff 102 Nov 7 13:35 Temporary Items
drwxr-xr-x 4 jeffme staff 238 Nov 7 17:23 lori’s MacBook Air.tmp.sparsebundle
Jeffs-MacBook-Pro:TimeMachine jeffme$ ls -la Macintosh.sparsebundle/
total 56
drwxr-xr-x 4 jeffme staff 374 Nov 7 17:23 .
drwxr-xr-x 12 jeffme staff 476 Nov 7 18:20 ..
drwxr-xr-x 2 jeffme staff 340 Nov 7 13:35 .AppleDouble
-rwxr-xr-x 1 jeffme staff 500 Oct 9 15:51 Info.bckup
-rwxr-xr-x 1 jeffme staff 500 Oct 9 15:51 Info.plist
drwxr-xr-x 2 jeffme staff 352512 Nov 7 17:23 bands
-rwxr-xr-x 1 jeffme staff 445 Nov 1 17:23 com.apple.TimeMachine.MachineID.bckup
-rwxr-xr-x 1 jeffme staff 445 Nov 1 17:23 com.apple.TimeMachine.MachineID.plist
-rwxr-xr-x 1 jeffme staff 1512 Nov 1 16:32 com.apple.TimeMachine.Results.plist
-rwxr-xr-x 1 jeffme staff 7002 Nov 1 16:32 com.apple.TimeMachine.SnapshotHistory.plist
-rwxr-xr-x 1 jeffme staff 0 Oct 9 15:51 token
Jeffs-MacBook-Pro:TimeMachine jeffme$ hdiutil attach -noverify -nomount Macintosh.sparsebundle/
/dev/disk2
Jeffs-MacBook-Pro:TimeMachine jeffme$
Jeffs-MacBook-Pro:TimeMachine jeffme$
Jeffs-MacBook-Pro:TimeMachine jeffme$ mount /dev/disk2
mount: /dev/disk2: unknown special file or file system.
Jeffs-MacBook-Pro:TimeMachine jeffme$ diskutil info /dev/disk2
Device Identifier: disk2
Device Node: /dev/disk2
Part of Whole: disk2
Device / Media Name: Apple sparse bundle disk image Media
Volume Name: Not applicable (no file system)
Mounted: Not applicable (no file system)
File System: None
Content (IOContent): None
OS Can Be Installed: No
Media Type: Generic
Protocol: Disk Image
SMART Status: Not Supported
Total Size: 2.0 TB (1987941040128 Bytes) (exactly 3882697344 512-Byte-Blocks)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
Thanks in advance for any help!
- JeffHi SKS -
Thanks for that link - I actually referenced some of the steps in that page without mentioning its URL.
The key problem there is that this step:
chflags -R nouchg /Volumes/{name of your network share}/{name of}.sparsebundle
yields nothing - no response.
Then, the next step:
hdiutil attach -nomount -noverify -noautofsck /Volumes/{name of your network share/{name of}.sparsebundle
Gives me:
/dev/diskx
Instead of something like this:
/dev/diskx Apple_partition_scheme
/dev/diskxs1 Apple_partition_map
/dev/diskxs2 Apple_HFSX
So... it's definitely a little crazy messed up.
instead of: -
In new IPAD, in email, can see subject data in preview pane but not on right side of screen, its always blank any ideas
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Have lotus notes (mail) on my Ipad but since a few days I see on the left handside the header of the mails , if I choose one , in only get the header
on the right side but the mail does not open and also I cannot see any attachements? Did compare the settings with my collegues and they are
excactly the same. Would somebody know what could be wrong??Try closing the Mail app completely and see if the email contents show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I can see the Content Reference files but not inside DreamWeaver
When i finally found out how you should get to the HMTL reference panel (via Windows>Results>Reference) I realised I missed that Reference panel. I only have the options Search, Validation, LinkChecker, SiteReports and FTP Log in that menu. No Reference.
But I see on my HD maps like C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\configuration\Content\Reference\HTML
and other Reference libraries are also present (CSS, ASP, etc) and filled.
How do I get those into a Reference panel in my DreamWeaver if I dont have a Refrence button?
ThanksHave a look here http://helpx.adobe.com/dreamweaver/using/the-new-modernized-dreamweaver-cc-ii.html
-
I tried closing Firefox and even restarting my computer, but it still doesn't go back to scrolling slowly.
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
To back up my content on iPad, I go to cloud notification and then backup & storage> backup now.
After connected to Wi-Fi network and power plugged I give backup now command and iPad content seems to me getting backed up but even after 10 hours of exercise I fail to get content backed up on iCloud
Why so? Am I missing some step to initiate backup now process?
Please educate me or inform me how to fix this problemI found the answer in another discussion group, so I have just erased everything through settings on my new iphone and in Backups on itunes, I have clicked on restore back up. So it appears to be working.
-
Multiple users on a Bridge network. Some of us can see keywords and others cannot.
We have multiple users on Bridge. We set up a cache connected to our server that has tons of photos on it. When we type in a keyword, some of us can see it on our Bridge on our computers but others cannot. How can we all be in sync with our searching?
Is it a connection problem? Any feedback is appreciated.
Thanks!Curt
how do you know if your using the
Central cache all distributed cache ?
and are they both stored in the same place ? -
I dropped my ipad and I can no longer see the contents but they're there on itune
My iPad two was dropped - not hard only from a low table to the floor and it was in a leather case - now I can no longer see the contents on the iPad. I can see the contents in Itune but no display on my pad. Please help!
Try resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete the "Slide to Unlock" screen will display.
Cheers,
GB -
Websites are loading fine, I can see that the loading has completed as usual, but i can see only empty page instead of some imfomation. Also page has scrolls - as usual. Sometimes for a second I can see the content but then it disappears. I can't even open the "help" page normally.
Of course, everything works fine in other browsers. What am I do to?Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
Problem in creating 800 client to see table content .
HI,
I am new to sap . I have ideas 4.7 in windows 2003. i can see table content under user sap* and password 060719* . I have created a user sapuser . through client 000 , i can create create abap program , but could not find ant table content like mara . at first time after creating sapuser , it asked me the access key. i gave 36687663221261278694 and it has taken . but to see table content , i created a new user as partha in client 800. but at first time at the time of logging it is asking the access key. though i am giving same key it is not taking .
1) is there any other key for that educational version ?
2) how to crreate a user in client 800 . pls give step by step procedure .
3) for creating a user under client 800 . should i delete my sapuser created under 000 client.Hi Jack,
First of all, the client 000 is one of the standard clients that comes with any SAP R/3 installation (with client 001 and 066 (for EarlyWatch for SAP auditory purposes)). To work with the system you should always make a copy of the client 000 or 001 to a new client i.e. client 200, 400, or whatever name.
In the case of IDES, the system always comes with the client 800, where you can find all the IDES configuration and data (for test, training, sandbox). If you want to work in the system you should work on this client (800). To check the tables you can always use transaction se12 (table structure: fields, keys) and se16 to see the table content. If you want to create users you should always do it in the client 800 or any other client you've created (not in the standard ones 000, 001, 066, try to maintain these clients clean of any custom data).
To view the tables data you dont need any key. The keys are requested when you want to register a developer user (to create a new abap program (all the new programs must start with Z (or X,Y) to differentiate from the standard SAP programs. The keys are also requested when you want to edit a standard program or table or any other standard SAP object.
1) To get the keys for any SAP system (there are 2 types of keys: developer user and for editing any standard object) you must log on the OSS service (with the user and password provided by SAP when you got your SAP software) : service.sap.com/sscr. Here you use the installation number of your IDES system (the system must be registered in OSS) and then you can create your developer users or standard object keys.
2)To create a user in any system you need to go to transaction SU01. Here you can make a copy of SAP* user for example (choosing in the trx the button copy) to create your new user. you assign a password to the user and save it. You need to login again on the system and put your new password. This is the easiest way, otherwise you can create a user from zero but you will need to add more information to the user. To start you can create a copy of SAP* or DDIC users.
3) Yes, I suggest you delete the user you've created in client 000, try to keep it clean of any customer modifications (you could leave it there but is not a good practice).If you want to work with your IDES system and the IDES data, use the client 800.
Good luck,
Maybe you are looking for
-
Control structure in loops.
I want to do something like below done in Perl in Pl/Sql but am not getting to it. # Perl code while($i <5) ... DO SOMETHING if ($i == 3) # means that start the loop again with $i = 4. next; # The following lines will be skipped when the value of $i
-
When I play video clips from websites like Prescreen the sound is loud enough to hear w/out headphones. When I play my own professionally mastered video I have to wear head phones to hear them loud enough. Is there a trick in Compressor or other so
-
Hello Guys Have some problem with my 4s 16GB
So heres the thing.. Whenever I use my phones Rear camera It opens and gets Stuck..... . THe front camera works Pretty fine ...But when i use the rear camera and even if i shake the phone slightly THERE YOU GOOO.... **** t
-
I wonder if Apple could make this happen to help customers track their stolen macs!!!
-
Address Book on computer not recognized to iCloud contacts
My Address book data on my computer is not being reflected in iCloud to my Contacts. WHY?