Web application deployment takes too long?
Hi All,
We have a wls 10.3.5 clustering environment with one admin server and two managered servers separately. When we try to deploy a sizable web application, it takes about 1 hour to finish. It seems that it takes too long to finish the deployment. Here is the output from one of two managerd server system log. Could anyone tell me it is normal or not? If not, how can I improve this?
Thanks in advance,
John
+####<Feb 29, 2012 12:11:03 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535463373> <BEA-149059> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] is transitioning from STATE_NEW to STATE_PREPARED on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:05 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <9baa7a67b5727417:26f76f6c:135ca05cff2:-8000-00000000000000b0> <1330535465664> <BEA-149060> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] successfully transitioned from STATE_NEW to STATE_PREPARED on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466493> <BEA-149059> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] is transitioning from STATE_PREPARED to STATE_ADMIN on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466493> <BEA-149060> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466809> <BEA-149059> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] is transitioning from STATE_ADMIN to STATE_ACTIVE on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466809> <BEA-149060> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server Pinellas1tMS3.>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442300> <BEA-320143> <Scheduled 1 data retirement tasks as per configuration.>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320144> <Size based data retirement operation started on archive HarvestedDataArchive>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320145> <Size based data retirement operation completed on archive HarvestedDataArchive. Retired 0 records in 0 ms.>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320144> <Size based data retirement operation started on archive EventsDataArchive>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320145> <Size based data retirement operation completed on archive EventsDataArchive. Retired 0 records in 0 ms.>+
+####<Feb 29, 2012 1:10:23 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1330539023098> <BEA-003107> <Lost 2 unicast message(s).>+
+####<Feb 29, 2012 1:10:36 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330539036105> <BEA-000111> <Adding Pinellas1tMS2 with ID -9071779833610528123S:entwl2t-vm:[7005,7005,-1,-1,-1,-1,-1]:entwl2t-vm:7005,entwl3t-vm:7007:Pinellas1tDomain:Pinellas1tMS2 to cluster: Pinellas1tCluster1 view.>+
+####<Feb 29, 2012 1:11:24 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330539084375> <BEA-000128> <Updating -9071779833610528123S:entwl2t-vm:[7005,7005,-1,-1,-1,-1,-1]:entwl2t-vm:7005,entwl3t-vm:7007:Pinellas1tDomain:Pinellas1tMS2 in the cluster.>+
+####<Feb 29, 2012 1:11:24 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330539084507> <BEA-000128> <Updating -9071779833610528123S:entwl2t-vm:[7005,7005,-1,-1,-1,-1,-1]:entwl2t-vm:7005,entwl3t-vm:7007:Pinellas1tDomain:Pinellas1tMS2 in the cluster.>+
Edited by: john wang on Feb 29, 2012 10:36 AM
Edited by: john wang on Feb 29, 2012 10:37 AM
Edited by: john wang on Feb 29, 2012 10:38 AM
Hi John,
There may be some circumstances like when there are many files in the WEB-INF folder and JPS don't use TLD.
I don't think a 1hour deployment is normal, it should be much more faster.
Since you are using 10.3.5, I suggesto you to install the corresponding patch:
1. Download patch 10118941p10118941_1035_Generic.zip
2. Uncompress the file p10118941_1035_Generic.zip
3. Copy the required files (patch-catalog_XXXXX.xml, CIRF.jar ) to the Patch Download Directory (typically, this folder is <WEBLOGIC_HOME>/utils/bsu/cache_dir).
4. Rename the file patch-catalog_XXXXX.xml into patch-catalog.xml .
5. Start Smart Update from <WEBLOGIC_HOME>/utils/bsu/bsu.sh .
6. Select "Work Offline" mode.
7. Go to File->Preferences, and select "Patch Download Directory".
8. Click "Manage Patches" on the right panel.
9. You will see the patch in the panel below (Downloaded Patches)
10. Click "Apply button" of the downloaded patch to apply it to the target installation and follow the instructions on the screen.
11. Add "-Dweblogic.jsp.ignoreTLDsProcessingInWebApp=true" to the Java options to ignore additional findTLDs cost.
12. Restart servers.
Hope this helps.
Thanks,
Cris
Similar Messages
-
OIM11g managed server startup takes too long
I am running a OIM11g managed server using weblogic on windows xp; in development mode
My managed server takes too long to startup; averaging atleast an hour at the minimum.
I am attaching the logs from the server between the time frame when it took the longest time.
Can someone please help me to improve the startup.
Edited by: 838243 on Feb 20, 2011 10:22 AM<9:32:14 PM> <Info> <EJB><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-010008> <EJB Deploying file: iam-ejb.jar>
<9:45:06 PM> <Info> <JDBC><oim1> <[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-001128> <Connection for pool "mds-oim" closed.>
<9:45:07 PM> <Info> <Common><oim1> <MDSPollingThread-[oim, jdbc/mds/MDS_REPOS]> <anonymous> <BEA-000628> <Created "1" resources for pool "mds-oim", out of which "1" are available and "0" are unavailable.>
<10:00:06 PM> <Info> <JDBC><oim1> <[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-001128> <Connection for pool "mds-oim" closed.>
<10:00:07 PM> <Info> <Common><oim1> <MDSPollingThread-[oim, jdbc/mds/MDS_REPOS]> <anonymous> <BEA-000628> <Created "1" resources for pool "mds-oim", out of which "1" are available and "0" are unavailable.>
<10:15:11 PM> <Info> <JDBC><oim1> <[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-001128> <Connection for pool "mds-oim" closed.>
<10:15:41 PM> <Info> <Common><oim1> <MDSPollingThread-[oim, jdbc/mds/MDS_REPOS]> <anonymous> <BEA-000628> <Created "1" resources for pool "mds-oim", out of which "1" are available and "0" are unavailable.>
<10:30:11 PM> <Info> <JDBC><oim1> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-001128> <Connection for pool "mds-oim" closed.>
<10:30:15 PM> <Info> <Common><oim1> <MDSPollingThread-[oim, jdbc/mds/MDS_REPOS]> <anonymous> <BEA-000628> <Created "1" resources for pool "mds-oim", out of which "1" are available and "0" are unavailable.>
<10:32:44 PM> <Info> <Deployer><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-149060> <Module iam-ejb.jar of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_NEW to STATE_PREPARED on server oim_server1.>
<10:32:44 PM> <Info> <Deployer><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-149059> <Module dataobjects-ejb.jar of application oim [Version=11.1.1.3.0] is transitioning from STATE_NEW to STATE_PREPARED on server oim_server1.>
<10:33:08 PM> <Info> <J2EE><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-160166> <References were found in deployment plan for module 'dataobjects-ejb.jar' with uri, 'META-INF/weblogic-ejb-jar.xml'. The plan was merged.>
<10:33:14 PM> <Info> <EJB><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-010008> <EJB Deploying file: dataobjects-ejb.jar>
<10:38:10 PM> <Info> <Deployer><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-149060> <Module dataobjects-ejb.jar of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_NEW to STATE_PREPARED on server oim_server1.>
<10:38:10 PM> <Info> <Deployer><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-149059> <Module iam-async-mdb.jar of application oim [Version=11.1.1.3.0] is transitioning from STATE_NEW to STATE_PREPARED on server oim_server1.>
<10:38:10 PM> <Info> <J2EE><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-160166> <References were found in deployment plan for module 'iam-async-mdb.jar' with uri, 'META-INF/ejb-jar.xml'. The plan was merged.>
<10:38:11 PM> <Info> <J2EE><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-160166> <References were found in deployment plan for module 'iam-async-mdb.jar' with uri, 'META-INF/weblogic-ejb-jar.xml'. The plan was merged.>
<10:38:11 PM> <Info> <EJB><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-010008> <EJB Deploying file: iam-async-mdb.jar>
<10:38:13 PM> <Info> <Deployer><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-149060> <Module iam-async-mdb.jar of application oim [Version=11.1.1.3.0] successfully transitioned from STATE_NEW to STATE_PREPARED on server oim_server1.>
<10:38:13 PM> <Info> <Deployer><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-149059> <Module xlWebApp of application oim [Version=11.1.1.3.0] is transitioning from STATE_NEW to STATE_PREPARED on server oim_server1.>
<10:38:13 PM> <Info> <J2EE><oim1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <WLS Kernel> <BEA-160166> <References were found in deployment plan for module 'xlWebApp.war' with uri, 'WEB-INF/web.xml'. The plan was merged.>
Edited by: 838243 on Feb 20, 2011 10:22 AM -
Query designer takes too long to save a query
Hi dear SDN friends.
I´m working with query designer in BI 7 and sometimes it takes too long to save a query, about ten minutes. Sometimes it never ends saving and some other times it saves the same query in 1 minute.
Can anybody please give an advice about this behavior of the query designer?
We have recently update BI to sp18. In query designer I have sp5 revision 529
Best regards,
Karim ReyesHello Karim,
I would suggest testing this again in the latest Frontend Patch available (FEP 602). In FEPs 600, 601, & 602 there were some performance and stability improvements made which may correct your issue. If the issue persists, I would suggest then opening a Customer Message via Service Marketplace.
It can be downloaded from:
http://service.sap.com/swdc
u2192Download
u2192Support Packages and Patches
u2192Entry by Application Group
u2192SAP Frontend Components
u2192BI ADDON FOR SAPGUI
u2192 BI 7.0 ADDON FOR SAPGUI 7.10
u2192 BI 7.0 ADDON FOR SAPGUI 7.10
u2192Win32
See SAP Note 1085218 for planned FEP releases.
I hope that helps.
Regards,
Tanner Spaulding
SAP NetWeaver RIG Americas, BI -
Displaying PathGeometry into canvas take too long time
Hi every one,
I am working on spatial data with an application WPF and I would like to draw a map from data queries.
I got my data and I am able to draw them on a canvas with scroll bar and zoom.
My problem is when I want to zoom or scroll the canvas take a long time before draw the map.
The big problem is there :
Dim poly As New Polygon
poly.Stroke = Brushes.Red
poly.Fill = Brushes.Orange
poly.StrokeThickness = 5
Dim colPoint As New PointCollection
For i = 1 To geo.STNumPoints
Dim ls As New LineSegment()
colPoint.Add(New Point(geo.STPointN(i).STX.Value - extentA, geo.STPointN(i).STY.Value - extentB))
Next
colPoint.Add(New Point(geo.STPointN(1).STX.Value - extentA, geo.STPointN(1).STY.Value - extentB))
poly.Points = colPoint
masterCanvas.Children.Add(poly)
so the canvas is "masterCanvas" and i add each Polygon one by one. I would like if it is possible to gather all polygon into one "image" and then when it will refresh the canvas it will draw only one thing.
Regards.Hi,
I found that you have posted it in the forum Acamar suggested.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/e2d50b4e-0d76-4a3c-b229-521b648b54b3/displaying-pathgeometry-into-canvas-take-too-long-time?forum=wpf#e2d50b4e-0d76-4a3c-b229-521b648b54b3
Please just focus on that thread, and you could mark if any reply which is helpful as answer.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
WL 7.0 and Web Application Deployment - HELP
I've got a problem with WL 7.0 on Windows 2000.
I messed up a Web Applications deployment. I was having problem with
an example of an application I installed. Someone suggested I do the
following:
Shut down WL
cd c:\bea\user_projects\AppDomain
mv BuyServer BuyServer-ORIG <<< BuyServer is the name of the WL
domain server this web app is deployed to
Restart everything
They said this would undeploy the web app. Yeah, right ....
Well, the web app still showed up. So being a dork I tried to
Undeploy it even though the BuyServer directory wasn't there anymore.
This obviously didn't work.
So I did a fresh deployement of the web app. This actually worked. A
new BuyServer directory was created by WL. BUT in the Deployment
Activities screen for the web app, there is a Activity I can't get rid
of. The first listed activity is the deployment activitiy with a
status of COMPLETED.
The second listed activity says:
Activity: Activate application buy on
BuyServer Running
Status: RUNNING
Begin/End times are blank
And there is a CANCEL button on the far right. I'm pretty sure this
is the attempted undeploy I mentioned above. Pressing this button
doesn't do anything. I can repeated undeploy and redeploy this web
app but that second activity keeps coming back.
Where does WL keep these Deployment activities stored ? Its putting
them somewhere in storage. Is there anyway I can delete this failed
activity ?
Any thoughts appreciated.I am sure you "sovled" the problem by now but...
Sean O'Neill <[email protected]>
wrote:
I've got a problem with WL 7.0 on Windows 2000.
I messed up a Web Applications deployment. I was having problem with
an example of an application I installed. Someone suggested I do the
following:
Shut down WL
cd c:\bea\user_projects\AppDomain
mv BuyServer BuyServer-ORIG <<< BuyServer is the name of the WL
domain server this web app is deployed to
Restart everythingAll this does is move the domain directory to a new one, it doesn't take care
of the application.
They said this would undeploy the web app. Yeah, right ....Sorry someoned fed you the wrong info. Buyer beware. ;)
So when you "deploy" an applicaiton, it goes into config.xml
$DOMAIN_NAME/config.xml
It looks something like:
<Application Name="mywebapp"
Path="E:\weblogic\dev\sandbox\griffith\apps\output" TwoPhase="true">
<WebAppComponent Name="mywebapp" Targets="myserver" URI="mywebapp.war"/>
</Application>
You should be able to "undeploy" this thing in 3 ways.
1) by starting the server and "deleteing" it with the little trash can icon in
the Application/module list.
2) don't start your server, and removed the <Application tag
3) start server and run weblogic.Deployer
java weblogic.Deployer -name mywebapp -remove
>
Well, the web app still showed up. So being a dork I tried to
Undeploy it even though the BuyServer directory wasn't there anymore.
This obviously didn't work.Nope.
>
So I did a fresh deployement of the web app. This actually worked.
A
new BuyServer directory was created by WL. I dont follow how doing a deployment creates BuyServer, I thought that was the
name of your domain, is that also the name of your webapp?
BUT in the Deployment
Activities screen for the web app, there is a Activity I can't get rid
of. The first listed activity is the deployment activitiy with a
status of COMPLETED.
The second listed activity says:
Activity: Activate application buy on
BuyServer Running
Status: RUNNING
Begin/End times are blank
And there is a CANCEL button on the far right. I'm pretty sure this
is the attempted undeploy I mentioned above. Pressing this button
doesn't do anything. I can repeated undeploy and redeploy this web
app but that second activity keeps coming back.Sorry sounds like you have hit a bug. :(
Deploy from the command line.
java weblogic.Deployer <url/user/pass> -name mywebapp -source PATH_TO_EXPLODED_DIR_OR_EAR_OR_WAR_FILE
-activate
If it fails to return, then post the server's log file.
>
Where does WL keep these Deployment activities stored ? Its putting
them somewhere in storage. They are only in memory for duration of server run, if you restart they go away.
Is there anyway I can delete this failed
activity ?
Any thoughts appreciated.Cheers
mbg
> -
Business Rules Project Takes Too Long to Open
Does anyone know why it takes too long (~3-5 minutes) to open/edit a security project definded for assigning business rules to planning application forms? We are using Hyperion v11.1.1.3.0. Essbase is on Windows server, Shared Services on Solaris 10 Unix. Even before we migrated Essbase to Windows to gain better performance running calcs, opening projects using EAS has always been very slow to open. Please advice if there is a way to improve performance on this.
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Firefox takes a long time to start up
* https://support.mozilla.com/en-US/kb/firefox-takes-long-time-start-up
Check and tell if its working. -
Why finding replication stream matchpoint takes too long
hi,
I am using bdb je 5.0.58 HA(two nodes group,JVM 6G for each node).
Sometimes, I found bdb node takes too long to restart(about 2 hours).
When this occurs, I catch the process stack of bdb(jvm process) by jstack.
After analyzing stack,I found "ReplicaFeederSyncup.findMatchpoint()" taking all the time.
I want to know why this method takes so much time,and how can I avoid this bad case.
Thanks.
帖子经 liang_mic编辑过Liang,
2 hours is indeed a huge amount of time for a node restart. It's hard be sure without doing more detailed analysis of your log as to what may be going wrong, but I do wonder if it is related to the problem you reported in outOfMemory error presents when cleaner occurs [#21786]. Perhaps the best approach is for me to describe in more detail what happens when a replicated node is connecting with a new master, which might give you more insight into what is happening in your case.
The members of a BDB JE HA replication group share the same logical stream of replicated records, where each record is identified with a virtual log sequence number, or VLSN. In other words, the log record described by VLSN x on any node is the same data record, although it may be stored in a physically different place in the log of each node.
When a replica in a group connects with a master, it must find a common point, the matchpoint, in that replication stream. There are different situations in which a replica may connect with a master. For example, it may have come up and just joined the group. Another case is when the replica is up already but a new master has been elected for the group. One way or another, the replica wants to find the most recent point in its log, which it has in common with the log of the master. Only certain kinds of log entries, tagged with timestamps, are eligible to be used for such a match, and usually, these are transaction commits and aborts.
Now, in your previous forum posting, you reported an OOME because of a very large transaction, so this syncup issue at first seems like it might be related. Perhaps your replication nodes need to traverse a great many records, in an incomplete transaction, to find the match point. But the syncup code does not blindly traverse all records, it uses the vlsn index metadata to skip to the optimal locations. In this case, even if the last transaction was very long, and incomplete, it should know where the previous transaction end was, and find that location directly, without having to do a scan.
As a possible related note, I did wonder if something was unusual about your vlsn index metadata. I did not explain this in outOfMemory error presents when cleaner occurs but I later calculated that the transaction which caused the OOME should only have contained 1500 records. I think that you said that you figured out that you were deleting about 15 million records, and you figured out that it was the vlsn index update transaction which was holding many locks. But because the vlsn index does not record every single record, it should only take about 1,500 metadata records in the vlsn index to cover 15 million application data records. It is still a bug in our code to update that many records in a single transaction, but the OOME was surprising, because 1,500 locks shouldn't be catastrophic.
There are a number of ways to investigate this further.
- You may want to try using a SyncupProgress listener described at http://docs.oracle.com/cd/E17277_02/html/java/com/sleepycat/je/rep/SyncupProgress.html to get more information on which part of the syncup process is taking a long time.
- If that confirms that finding the matchpoint is the problem, we have an unadvertised utility, meant for debugging, to examine the vlsn index. The usage is as follows, and you would use the -dumpVLSN option, and run thsi on the replica node. But this would require our assistance to interpret the results. We would be looking for the records that mention where "sync" points are, and would correlate that to the replica's log, and that might give more information if this is indeed the problem, and why the vlsn index was not acting to optimize the search.
$ java -jar build/lib/je.jar DbStreamVerify
usage: java { com.sleepycat.je.rep.utilint.DbStreamVerify | -jar je-<version>.jar DbStreamVerify }
-h <dir> # environment home directory
-s <hex> # start file
-e <hex> # end file
-verifyStream # check that replication stream is ascending
-dumpVLSN # scan log file for log entries that make up the VLSN index, don't run verify.
-dumpRepGroup # scan log file for log entries that make up the rep group db, don't run verify.
-i # show invisible. If true, print invisible entries when running verify mode.
-v # verbose -
I have been having lagging problems with YouTube videos for a number of months now. It simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again. Even with little 2 and 3 minute videos.
I have a fast computer and my webpages load really, really fast. I have FireFox 4 browser and a Vista Home Premium 64-bit OS. So I don't have a slow computer or web browser. But these slow YouTube vids take way too long to load for some reason.
Does anyone have any idea how I can speed up YouTube?Hi
The forums are customer to customer in the first instance, Only the mods (BT) will ask for personal information through a email link. Would you mind posting your Hub stats & BT speed test results this will help all with diagnosis-
To post the full stats from your router
for home hub - 192.168.1.254
Navigate to ADSL Settings or use the A-Z at the top right
Click on More Details and then post the results.
Run BT speed tester and post the results from http://speedtester.bt.com/
If possible it would be best to connect to the BT master socket this will rule out any telephone/broadband extension wiring also consider the housing of the hub/router as anything electrical can cause problems as these are your responsibility, if these are found to be the case Openreach (engineer) will charge BT Broadband, which will be passed onto you, around £130.00.
Noisy line! When making telephone calls, if so this is not good for your broadband, you can check-
Quite line test dial 17070 option 2 and listen - should hear nothing best done with old type analogue phone digital (dect) will do but may have slight hiss If you hear noise- crackling pops etc, report it as a noisy line on your phone, don’t mention broadband, Bt Faults on 151.
As for your FTTC its available in some areas between 40% & 80% of customers in enabled areas can receive it!
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack.... -
Page takes too long to load because of videos
Hi. I have a website that I made, but the page takes too long to load because there are videos on it. Is there any way to stop the videos from auto-loading and instead only load when someone clicks on them to play?
There are several ways to have videos on a page without having them load until they are selected to play. A couple are:
1 - Opening Item in a New, Precisely Sized Window. This test site has 9 videos on the page: PhotoPresenter Animated Slideshow Themes.
2 - QT Movies via Export for Web in QT Player. This method is more difficult to implement.
OT -
Error while web application deployment in NetBeans5.5
Error while web application deployment in NetBeans5.5. I am always getting Tomcat deployment error. using Netbeans 5.5.1 with bundeld tomcat. But in some machines its working fine.
regards
jossy v joseWhat is the error message you see?
Are there any stacktraces or other relevant messages in the ide log file? (The ide log file is [userdir]/var/log/messages.log. On userdir: http://blogs.sun.com/karthikr/entry/jse_directories)
You can also check the server log file to see if there are more detailed messages.
You can also try setting ant's verbose level to debug or verbose (Tools | Options | Miscellaneous | Ant | Verbosity Level) and check the output. -
Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).
Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false -
Accessing BKPF table takes too long
Hi,
Is there another way to have a faster and more optimized sql query that will access the table BKPF? Or other smaller tables that contain the same data?
I'm using this:
select bukrs gjahr belnr budat blart
into corresponding fields of table i_bkpf
from bkpf
where bukrs eq pa_bukrs
and gjahr eq pa_gjahr
and blart in so_DocTypes
and monat in so_monat.
The report is taking too long and is eating up a lot of resources.
Any helpful advice is highly appreciated. Thanks!Hi max,
I also tried using BUDAT in the where clause of my sql statement, but even that takes too long.
select bukrs gjahr belnr budat blart monat
appending corresponding fields of table i_bkpf
from bkpf
where bukrs eq pa_bukrs
and gjahr eq pa_gjahr
and blart in so_DocTypes
and budat in so_budat.
I also tried accessing the table per day, but it didn't worked too...
while so_budat-low le so_budat-high.
select bukrs gjahr belnr budat blart monat
appending corresponding fields of table i_bkpf
from bkpf
where bukrs eq pa_bukrs
and gjahr eq pa_gjahr
and blart in so_DocTypes
and budat eq so_budat-low.
so_budat-low = so_budat-low + 1.
endwhile.
I think our BKPF tables contains a very large set of data. Is there any other table besides BKPF where we could get all accounting document numbers in a given period? -
Hi!
I am in troubble
following is the query
SELECT inv_no, inv_name, inv_desc, i.cat_id, cat_name, i.sub_cat_id,
sub_cat_name, asset_cost, del_date, i.bl_id, gen_desc bl_desc, p.prvcode, prvdesc, cur_loc,
pldesc, i.pmempno, pmname, i.empid, empname
FROM inv_reg i,
cat_reg c,
sub_cat_reg s,
gen_desc_reg g,
ploc p,
province r,
pmaster m,
iemp_reg e
WHERE i.sub_cat_id = s.sub_cat_id
AND i.cat_id = s.cat_id
AND s.cat_id = c.cat_id
AND i.bl_id = g.gen_id
AND i.cur_loc = p.plcode
AND p.prvcode = r.prvcode
AND i.pmempno = m.pmempno(+)
AND i.empid = e.empid(+)
&wc
order by prvdesc, pldesc, cat_name, sub_cat_name, inv_no
and this query returns 32000 records
when i run this query on reports 10g
then it takes 10 to 20 minuts to generate report
how can i optimize it...?Hi Waqas Attari
Pls study & try this ....
When your query takes too long ...
hope it helps....
Regards,
Abdetu... -
Hyperion Planning Web URL is taking Too long time to respond
Hi,
When Users are accessing Hyperion Planning URL web link its taking too long time to respond.We restarted the services after these for 2 hours it works fine after that again same issue.Please advise.Hi John,
Follwing is the Log noted: when URL is slow:
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.HspRuntimeException: There was an error during the save process.
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764) -
WebI Report is taking too long time to opening
Hi All,
When iam trying to open the WebI report in Infoview , it is taking long time to open and refresh,
Please suggest me a solution.
Thanks in advance..
Regards,
MaheshHi,
As the issue you are facing is that the webi report is taking too long to open and refresh, I would recommend the below steps.
1. Check whether the webi report is set to "Refreh on Open" if yes probably you need to uncheck, save the report and open it again.
2. Try to run the same query in the backend database and see if it returns the data.
3. Try to run refresh the report for a smaller data selection.
4. make the report run on a specific webi server, and when refreshing have your BOBJ admin monitor that process to see if the process is going in a hung state, using High memory etc.
5. restart webi process and run again
Thanks,
aKs
Maybe you are looking for
-
While trying to download free apps, the former owners' apple i.d keeps showing up. I've followed the instructions to create my own apple i.d.-it's in the phone, but it seems that it's not recognized when trying to download. Do I need to clean out ev
-
I have setup a test system. It has a domain with 2 child domains. DomainA.xyz.com has users and workstations. DomainB.xyz.com is a resource domain and has servers. wyx.com is for IT administration. Users in domainA can logon to the domainB computer
-
The people, who have finished the game are not frequently playing the game. To bring them back, update the game with tuning. You can make people to comeback to the game everyday looking for the perfect tune for their faviourate cars!. It would increa
-
Determining the last time an appointment was modified
Does any one know how to determine the date and time an appointment was modified. I do not see any thing for this in the iCal format. I have looked in the CAPI documentation but must be missing it. Thanks
-
EJB and ADF- Checking State of Entity Bean before Commit
Hi All, I have created a sample using Ejb as business service and then created 2 forms in page and i am calling only one merge action for 2 forms. I need to validate whether the data is modified or not....in business service layer... So my doubt is h