Web publish tool creates blank page

I've been having some trouble with the LabVIEW web publishing tool. It seems that when I try to publish the front panel of my vi, a blank web page is produced instead. To publish, I select Tools>>Web Publishing Tool..., then select my VI from the VI name dropdown menu. I select monitor mode and use a refresh rate of a couple seconds. From there, I try to view a page preview, but all I see is a blank white page. When I try to view the html source of this page, it looks like a blank html document (i.e. view source just shows a blank page as well).
When I follow the web publishing wizard through to completion, I visit the address that the page is supposed to be published at, but get the same blank page results as I did in the preview. Note that I don't get a 404, just a blank page. However, when I look at the html document that was produced, it does contain a page (I've attached the html it produces, all I've done is change the extension to text so I could upload it).
I'm running LabVIEW 2009. The vi in question is in memory, running on the server computer. I have enabled the web server, but in the web publishing wizard, the "Start Web Server" button is inaccessible.
Does anyone know what might be wrong? Or better yet how to fix it?
Attachments:
exampleForForum.txt ‏1 KB

Jordan,
What I meant was that the VI was running on the computer that is acting as the server, which is in fact the same computer I was testing from. So yes, the problem still arose there. I have made some progress on this issue- it seems that it might be due to some bug with the Browser Access List. Our Browser Access list was empty. Whenever I tried to add something to it (i.e. by typing "*" into the Browser Address bar, selecting the "Allow viewing" radio button and then clicking the "Add" button), a blank entry would show up in the Browser access list. After hitting "ok" on the options box, the blank entry seemed to dissapear; when I would revisit the settings page under "tools->Options->Web Server" the browser list would show up totally empty again.
I was able to fix this problem just by typing "*" into the Browser Address bar, clicking "Add", and toggling back and forth between the radio button access options a few times. Eventually the * showed up as an entry in the browser access list, and when I hit ok the option seems to persist (so I can leave the Web Server options dialogue and return to it later to see that the * is still added with the proper permissions).
However, I'm still having problems. Now when I visit the url of my web published vi, I get the message "Client does not have access to the specified VI." I currently have the settings such that I think all browser clients should have view & control permissions for our published vis. I have attached a screenshot of this message and of our current browser permissions screen. Is this the proper set up? If not, what do I need to do to give viewing permissions to all clients?
Attachments:
screenshotWebPublishProblem.png ‏28 KB
screenshotBrowserPermissions.png ‏52 KB

Similar Messages

Why does my Web Publishing Tool fail to create an image of my front panel when I select the "Embedded" viewing mode?

I am trying to create an html file for access by a client computer through the LabVIEW Web Server. I want to enable the client to control the vi, so am chosing "Embedded" for the Viewing Option in the Web Publishing Tool. The small preview screen in the Web Publishing Tool shows an image of my front panel, but the resulting html file does not include this image. The Web Server error log shows a 404 error which I believe is due to the lack of an image (or any front panel objects) present in the html file: Error: 404 "Not Found" for "/.lv_frontpanelprotocol.rpvi100", file "c:/program files/national instruments/labview 2010/www/.lv_frontpanelprotocol.rpvi100": Can't access URL
If you are aware of this problem or know any solutions, please post a reply.
Thanks,
David

Does it work if you preview the web page locally?
Does the client computer have at least the minimum 2010 run time engine installed?
(quote: Additionally, the Run-Time Engine allows your browser to display VIs that are embedded in Web pages.")
LabVIEW Champion . Do more with less code and in less time .

Sharing a labview data on the internet by using web publishing tools

Hello,
Recently I was trying to display the real time data(dynamic) with front pannel of vi on my localhost and i have done that by using a Web Publishing Tools.
But now i want to display the same front panel on internet which can be viewed by everyone and the data must be running as per controlled in vi.
I don't get the clear concept of how to deploy the data on my webpage with real time display front pannel.
The think is i have a working website and the .html file of my vi created through web publishing tool.
But not understand that how can i view it on a web page with a address "www.xxxxxxx.com" coz its only visible with the help of localhost.
Regards
Mangesh
=========================================
Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
Mangesh D.
CLAD | Project Engineer
==
VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

Your computer needs a DNS name (available online through many free and paid services) and then your network needs to allow outside access to your computer. Then you should be able to access your remote front panel from anywhere.
Chris
Certified LabVIEW Architect
Certified TestStand Architect

Web publishing tool, I can't show the panel in embedded mode.

I don't know what happen but I have try every thing and still without the possibility to make a preview of my VI in the "web publishing tool" and also can't show the panel in embedded mode.
I can see the preview in the browser but it remain forever "downloading panel" and nothing more else happen.
Please help me because I don't find any explanation to this problem in Google.
Additional information:
1) I am using Labview professional development system 8.2 under Windows XP SP3 (it was the same under SP2), also in vista ultimate.
2) In the attachment I show that I'm using Mozilla Firefox but is the same problem under IE.

I don't think the preview ever shown an image.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to run an aplication of say 5 screens(Front panel) using web publishing tool

Hi,
I am trying to run an application through web publishing tool which is having 5 screens. I could able to see the very first screen successfully but as i navigate to the other from my application, new screen is not displaying. I also tried the same by including the url while building exe also but not working.
Please guide me.
Thanks,
Subbu
LV 8.0, 8.6, 2011,2012,2013 WinXP
Solved!
Go to Solution.

HI,
If you are going to develop a web application, you should be very clear and careful about this.
On Web the pops and your popup subvis will not work properly, You have to develop your application on Tab control. Your complete solution should be in a single packet.
If you want to give the access to different-different 5 users you can easily provide it. All users can monitor and control your application easily on web.
Its upto you, you can define the number of users to access the web application.
If you publish your application on local IP this will work only in your local network but if you publish it on your public IP this will work as a web application like Google, gmail, yahoo.....
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

Web publishing tool not working

Hello guys,
I am trying to do web publishing of my VI. The problem that I am facing is that it is working on one system but not on my other computer. Both the computers have evaluation version of LabVIEW and the operating system is Windows XP.
Here are the other details that I have -
1. The Web server is enabled by going to Tools >> Options >> Web Server
2. Port 80 is not blocked on both the computers.
3. Firewall is disabled on both the computers. Even the antivirus is disabled.
The error message that I am getting has been put in the attachment. The error text is " You must start the LabVIEW web server before previewing in your web page. Would you like to start now? " After this when I click yes, it is still not publishing.
Could anyone please let me know what might be the issue? I am unable to figure out why it is working in one and not on the other. For my application, I need to use both the computers.
Yours sincerely,
Herok
Attachments:
Error.png ‏7 KB

Hello,
Further to my query above, I have one more observation. It gives the message saying " Downloading Panel 0.00% of o bytes" but it never downloads anything.
Could someone please help me out with this, my applicaiton is struck because of this.
Yours,
Herok
Attachments:
error2.png ‏12 KB

PowerPoint to PDF creates "blank" pages

I just downloaded Acrobat 9 this afternoon and have tried several times to convert a very large PowerPoint presentation to a PDF file. One time is said "unexpected error" mesaage, so I shut down and restarted. The second time, it made the PDF file, but there were a lot of blank pages throughout the PDF document. Does anyone have any thoughts on fixing this??

Here was my dilemma. I was printing multiple files as Notes Pages to PDF. I had files created in Powerpoint 2010, natively and by me; files created in 2010 by someone else; files created in 2003 by me; and files created in 2003 by someone else. The files created by someone else didn't work. The ones created on this machine did. I tried countless printing options, restarted the print spooler, nothing helped. Then I embedded the true type fonts (all characters), saved the file to disk, closed it and re-opened it and POOF it worked.
My problem was only on Notes Pages printing or saving to PDF, and only with presentations not created on this machine regardless of version.
Hope this helps.
Karen

How to Create Blank pages & no links for more pages

Hello,
just started using iweb ...is there a way to create a blank page not associated with pictures, podcasts movies etc and I want to create a site with multiple picture pages but i dont want a link for every single page on my heading or that area between my header and the body.
whats happening right now is there is a link for every page in my site on the heading if i keep this up my heading will look like a big paragraph
thanks for any help

If you want a page not to be displayed in the navigational menu, then just click on the Inspector and click on the Page tab (second from the left). Under the name of the page (which you can also change here) there is a box to include page in navigation menu. Just uncheck that box and your page won't show up. Of course, I assume you will have a link to the undisplayed page(s) from other pages that are in the menu.
Hey, if this answered you question, could you please click on the "solved" or "helpful" button that you see in the title bar of my reply? I would really appreciate it.

Imported file creating blank page

I have a file of boilerplate text. My current document imports this (as a referenced file). The boilerplate file concludes with a table and then a single blank line using the Normal paragraph style. It all looks just fine in the boilerplate file.
However, in my document file, there's an extra blank page and I cannot delete. When I try to delete it, I get an error: "Cannot delete pages. They contain imported text that extends outside the page range you are deleting. Convert the text insets to text and try again."
Any suggestions?

I do not have pagination set to "make page count even" and I was importing into a paragraph of style "normal." However, you gave me an idea. I did some experimentation and this seems to fix it:
1. Open the file to be inserted. It should end with an empty paragraph, with font size of 2. Save & close.
2. Delete the inserted file from the chapter or document file.
3. If the extra blank page is still present, delete it.
4. Create a an empty paragraph where the inserted file will go, with font size of 2.
5. Put the cursor on the new empty paragraph and insert the file.
6. Refresh all references.
I know it seems convoluted, but it does appear to be working.
Thanks, Error7103.

Publishing site - get blank pages cos of rogue piece of script

Hi,
I've been publishing a site to a folder and ftping to a server for a few years. Every time I update I need to remove a piece of code
<?xml version="1.0" encoding="UTF-8"?>
from the beginning of every page. I was hoping that the latest iweb, with ftp-ing facilities (yippee) would have got this sorted... but alas, it is still there. Before I go in and physically cut that line out, it leaves me with a blank page. after I remove it, it all displays fine.
Any ideas?

Your problem is cause by a misconfiguration of the particular server you are using, not the code used by iWeb, which conforms to international standards. See this note for possible fixes. It may be easier to change hosts.
http://homepage.mac.com/thgewecke/parsingerror.html

OCR creates blank pages

I have a Windows 7 home premium and the Adobe Acrobat Pro 9.4.2. OCR had been working fine.Today that stopped and I don't have a clue why because no changes were made prior to the problem occuring today.
Today, after I opened a pdf document in Acrobat and perform ocr text recogniation on an image pdf with multiple pages, Acrobat does fine on text recognition on the first page but every other page in the document becomes blank (even the pages that are not in the ocr page recognition span become blank) -- no text - no anything, just blank pages. I had been using 9.4.1 and this problem started today. So, I updated to 9.4.2 and the same problem occurs.

I had the same problem recently, go to the document menu and select optimized scanned pdf
then try the ocr again and it should eliminate the blank pages, at least it worked for me. I also scanned the document at 600dpi before optimizing.

PDF Printing drops text or creates blank pages

I have the same problem as "alacker2" who noted this problem 2 days ago. The original prints fine from the source document and when printed from another computer. This problem exists for both of my printers (HP). I also experience blank pages when trying to print a PDF from another site. This problem is not consistent because I can print a similar page of the same document elements (tables, text and graphic (PDF))

I am printing from both a browser (safari) and from Acrobat Pro XI. The browser version was also saved to my computer and when I attempted to print, the results were blank pages. MAC OS 10.9.3. The printers are HP officeJet Pro 8600 and HP LaserJet P1102W

Creating blank pages in illustrator

I am trying to make a series of blank pages in illustrator with automator with the 'watch me do' function. I would like to make different size pages where it will start with 1'x1' and increase by half a foot at a time until it has 1'x1' to 5'x24'. I have every size I need in a spread sheet as well as the name I want each page to have.
My problem is I don't know how to make the 'watch me do' function copy the info from the next row. So for the first set it would take copy a1 of my spreadsheet and paste it as height, then copy a2 and paste it as width, then copy a3 and paste it as file name. Then in the next loop copy b1, b2, and b3.
How do I let it know to keep taking subsequent row?

No, I didn't run the actions as a batch, as there are several SVG files I need to do other things to... in addition to sending them back to the same folder as an eps. So really I wanted to make edits... then click on the action to save it. It just saves me a few steps.

When iam on web sites i get blank page that says:http redir.php?id=4 at top of page, and it blocks me off the site. how can i stop this ?

this comes on some web sites i am on: http66.197.21/redir.php?id=4, and then the site goes to a blank white page blocking the site. how do i stop this from happening?
== URL of affected sites ==
http://

View --> Show Toolbar

Jump menu creates blank page that is a specific size

I am attaching the code that worked for the jump menu to open
in another window but I cant figure out how to get the page to be a
specific size (w=600 h=650) and have no resizing or toolbars. Can
you suggest what is wrong or missing with the code?
<script type="text/javascript">

</script>
<form name="form" id="form">
<select name="portfolio" id="portfolio">
<option>Categories</option>
<option
value="advertising.html*_blank">Advertising</option>
<option value="corpid.html*_blank">Corporate
Identity</option>
<option
value="publishing.html*_blank">Publishing</option>
<option
value="websites.html*_blank">Websites</option>
<option
value="misc.html*_blank">Miscellaneous</option>
</select>
<input type="button" name="go_button" id= "go_button"
value="Go" onclick="MM_jumpMenuGo('portfolio','blank',0)" />
</form>

Hello,
Any help on this issue is highly appreciated.
Regards,
Anup N.

Web publish tool creates blank page

Similar Messages

Maybe you are looking for