Web Report not working on a different machine

Dear Experts,
I published my bex reports in Web. Url's works fine on my machine, but if I check the same Url on any other machine it gives a message 'page cannot be displayed'.
How can all the users view the reports on web? How sould I publish them?
Thanks,
Gnana

Hi Sarah,
If I understand you correctly,
Case1:
this is my url(http://itctest01:8020/sap/bw/bex?SAP-LANGUAGE=E&PAGENO=1&CMD=PROCESS_VARIABLES&VARIABLE_SCREEN=X&REQUEST_NO=1&dummy=#variables).
You want me to paste this url in C:\WINDOWS\system32\drivers\etc
Is it sufficient if I do this on my machine or I have to copy this url in other users.
Case2:
this url will be saved in C:\WINDOWS\system32\drivers\etc
in my machine, I need copy this url and send them to all users??
I searched for this, I don't find this url in C:\WINDOWS\system32\drivers\etc.
Is this url stored in a different format in C:\WINDOWS\system32\drivers\etc?
Thanks Sarah!!

Similar Messages

Crystal report not working on 64 bit machine

Hello friends,
Hope everyone is doing good. I have an issue and you all are requested to help me out.
I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are working fine when i deploy it on 32 bit machine, but when I deploy it on a 64 bit machine, my Application works fine but reports are not displayed, when ever i run report it ask Db credential with the following message
"The report you requested requires further information."
then Server, user ID and password filed, I off course supplied credential but no results.
For resolving the issue i installed VS 2008 on 64 bit machine with redist CR Viewer and tried to verify database for the report thinking this might be an issue, but in CR designer it gives me following error when i tried to verify database or create new connection using OLEDB provider for Oracle
Crystal Reports ActiveX Designer
Logon failed.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for Oracle
Description: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
OK
I tried the following fixes as well:
- Installed CR viewer for 64 bit machine
- Registering ORAOLEDB10.dll
- Reinstalling VS 2008
The Application works fine but Crystal reports are malfunctioning. Please help!!!!!!!!!!!!!!!
Thanks a ton in Advance
Happing coding and resolving issues
Danish Mustafa Khan

Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Web Report not working with parameter form

Hi,
I have a report which has got a parameter form. This report is
running fine in client/server environment. But when I deploy the
same report on web (CGI) using PARAMFORM=YES, I am getting the
parameter form and after pressing the SUBMIT button I am getting
a blank report under the following two cases even though I have
data for that query:
CASE1: <input type="hidden" name="desformat" value="html">
then I am getting the report with no data retrieved.
CASE2: <input type="hidden" name="desformat" value="pdf">
then I am getting completely blank report (no logo, no column
titles, etc.)
See the HTML code below. Remember, the same thing is running
fine in client/server environment. Moreover, if I make a HTML-
coded form for the report then everything on the client's
browser is running fine. But this is not what we want, 'coz we
are running the "BEFORE PARAMETER FORM" trigger in the report.
So, should I conclude that web-reports does not work with the
parameter forms?? Is it a bug???
Regards
Moiz
----------HTML Code------------------
<form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
bin/rwcgi60.exe">
Select the Weekend Date for which you would like to see your
Timesheet report
<input type="hidden" name="server" value="repserver">
<input type="hidden" name="report" value="timesheet.rdf">
<input type="hidden" name="userid" value="696122/696122@ors">
<input type="hidden" name="destype" value="cache">
<input type="hidden" name="desformat" value="html">
<input type="hidden" name="paramform" value = "yes">
<input type="submit" value="Run Report">
</p>
</form>
-------HTML Code END------------------
null

No pal, that's not the problem. The problem lies with the
"BEFORE PARAMETER FORM" report trigger on the web. Check this
out on ur report server and u will understand my problem.
Moiz
Ramonito Te (guest) wrote:
: I think the cause is the missing question mark after
rwcgi60.exe.
: Anyway here is my html file that runs under cgi. Hope this
helps.
: <HTML>
: 
: <FORM METHOD=POST
: ACTION="http://ntserver1/ows-bin/rwcgi60.exe?" METHOD="POST">
: 
: <INPUT name=server type=hidden value="ReportsServer">
: <INPUT name=paramform type=hidden value="yes">
: <CENTER><H1>Set Reports Multi-tier Server Parameters </H1>
Report Name: <INPUT name=report type=text value="c:
: \orant\webdemo\deptemp.rdf">
: Database Connection: <INPUT name=userid type=text
: value="scott/tiger@orcl81">
: <INPUT name=destype type=hidden value="cache">
: Output Format: <SELECT name=desformat> <OPTION value=HTMLCSS
: selected> HTMLCSS <OPTION
: alue=PDF> PDF </SELECT>
: <HR><INPUT type=submit value="Run Report!">
: </CENTER> </FORM> </HTML>
: lue="Run Report!">
: </CENTER> </FORM> </HTML>
: M. Moizuddin (guest) wrote:
: : Hi,
: : I have a report which has got a parameter form. This report
: is
: : running fine in client/server environment. But when I deploy
: the
: : same report on web (CGI) using PARAMFORM=YES, I am getting
the
: : parameter form and after pressing the SUBMIT button I am
: getting
: : a blank report under the following two cases even though I
: have
: : data for that query:
: : CASE1: <input type="hidden" name="desformat" value="html">
: : then I am getting the report with no data retrieved.
: : CASE2: <input type="hidden" name="desformat" value="pdf">
: : then I am getting completely blank report (no logo, no
column
: : titles, etc.)
: : See the HTML code below. Remember, the same thing is running
: : fine in client/server environment. Moreover, if I make a
HTML-
: : coded form for the report then everything on the client's
: : browser is running fine. But this is not what we want, 'coz
we
: : are running the "BEFORE PARAMETER FORM" trigger in the
report.
: : So, should I conclude that web-reports does not work with
the
: : parameter forms?? Is it a bug???
: : Regards
: : Moiz
: : ----------HTML Code------------------
: : <form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
: : bin/rwcgi60.exe">
: : Select the Weekend Date for which you would like to see your
: : Timesheet report
: : <input type="hidden" name="server" value="repserver">
: : <input type="hidden" name="report" value="timesheet.rdf">
: : <input type="hidden" name="userid" value="696122/696122@ors">
: : <input type="hidden" name="destype" value="cache">
: : <input type="hidden" name="desformat" value="html">
: : <input type="hidden" name="paramform" value = "yes">
: : <input type="submit" value="Run Report">
: : </p>
: : </form>
: : -------HTML Code END------------------
null

Some web sites not working in FF but they are OK in Safari.

A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJT

Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you

The web controls not work(windows phone)

Hi
I have a web app.after I make an animation in this page(like a transition page in loading page), the web controls not work more.
the site is shown but any thing not work like scrolling or tap in links

Can you please explain more clearly what you are doing and what you need help with? What is your overall scenario, what exactly is your code doing, what behaviour do you expect and how is that different from what you actually see?

Forms 6i Web test not working on NT

Installed Forms and Report 6i developer and server, 8i and also have WebDB listener installed and running. The Web report test works but when I run the test.fmx though the supplied .htm submission form, my dial-up networking window pops up and I see a small icon in the upper left corner of the brower window which I assume is the form trying to run. When I cancel the dial-up networking window the icon goes away and the the browser window says "Done" and no form is displayed. It can't figure out what type or conflict I am having or what parameter I need to adjust. Help?
Thanks
null

sarah,
Here Abhishek is talking about the Forms 6i Help, not about Forms 10g. And the help shortcut F1 is the default for windows, and its not there in the C:\DevSuiteHome_1\forms\fmrweb.res file.
Regards,
Manu.

Group Policy not work in some client machine.

Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.

Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Content Search Web Part not work for Office Web Apps

Hi ,
In Content Search Web Part word documents are not able to open in browser,but in document library its working.
Office Web Apps not work in Content search web part
Please help me
Regards
Sachin

Below is the display template to open the document in OWA.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>AdSpace Picture on top, 3 lines on bottom</title>

</head>
<body>

<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>

<div id="Item_PictureOnTop">

<div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
<div class="top-content-img" id="_#= pictureContainerId =#_">
<a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
_#= pictureMarkup =#_
</a>
</div>
<h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>
<span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>
</div>
</div>
</body>
</html>
Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
Problem solved.
Nehal Bhandari,ATL, Nagarro Softwares

Web links not working in iPhone calendar notes. Used to work. Ideas?

Web links not working in iPhone calendar notes. Used to work. Ideas?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Web Report not working on a different machine

Similar Messages

Maybe you are looking for