Web Server Core dumps
We recently upgraded to SunOne 9.1 on x86. We kept our webserver on 6.0 but upgraded the plugin. We started experiencing frequent core dumps of our webserver. We decided to upgrade webserver to 7.0 hoping the problem would go away. However, we continue to see the core dumps. Every core dump I looked at had the same stack trace; eg)
libc.so.1`strlen+0xc(11a55440, 10b5da88, 11a55388)
libpassthrough.so`__1cILBDaemonOserviceRequest6MrnMProxyRequest__I_+0x307(f229e08, 11a55388)
libpassthrough.so`__1cLDaemonEntryOserviceRequest6MrnMProxyRequest__I_+0x57(da23ca8, 11a55388)
libpassthrough.so`__1cMRequestGroupOserviceRequest6MrnMProxyRequest__I_+0x1b0(8263c28, 11a55388)
libpassthrough.so`__1cPLBDaemonManagerOserviceRequest6MrnMProxyRequest__I_+0x157(88054a0, 11a55388)
libpassthrough.so`__1cQservice_lbplugin6FpnGpblock_pnHSession_pnHRequest__i_+0x8dc(8719b20, f80fc5c, f80fcd4)
libpassthrough.so`service_passthrough+0x23(8719b20, f80fc5c, f80fcd4)
libns-httpd40.so`func_exec_str+0x1e7(8208328, 8719b20, f80fc5c, f80fcd4)
libns-httpd40.so`INTfunc_exec_directive+0x1d6(816f888, 8719b20, f80fc5c, f80fcd4)
libns-httpd40.so`INTservact_service+0x31a(f80fc5c, f80fcd4)
libns-httpd40.so`INTservact_handle_processed+0x11d(f80fc5c, f80fcd4)
libns-httpd40.so`__1cLHttpRequestUUnacceleratedRespond6M_v_+0x794(f80fc48)
libns-httpd40.so`__1cLHttpRequestNHandleRequest6MpnGnetbuf_I_i_+0x68e(f80fc48, f82a008, ffffffff)
libns-httpd40.so`__1cNDaemonSessionDrun6M_v_+0x654(f80fe08)
libnsprwrap.so`ThreadMain+0x20(f80fe08)
libnspr4.so`_pt_root+0xe7(f06c718)
libc.so.1`_thr_setup+0x4e(dcc2da00)
libc.so.1`_lwp_start(dcc2da00, 0, 0, dc62aff8, fd397340, dcc2da00)
Any ideas? Are there any known issues with the lbplugin?
My "solution" doesn't change your architecture at all.
Your web servers are showing a stack trace pointing to libpassthrough.so. This is a shared object that runs in the Web Server. I'm suggesting that rather than use an old libpassthrough.so that may (or may not) have problems, try using the built-in Reverse Proxy feature of Web Server. The Reverse Proxy feature is derived from the older libpassthrough.so, but has had many enhancements over the years. It IS a newer version of the load balancer shared object you are currently using.
Similar Messages
-
Step by Step of how to Install and configure the Web Server Core 2008 R2
I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.comHi MASNSN,
Thanks for your sharing =) -
11g Native Web Services Core Dump ( qmuwsPrintPackWSDL() )
I know that native PL/SQL web services are newer functionality, but I have not been able to find any information on the following issue on MetaLink or here on the forums. When creating 11g native web services when attempting to retrieve the WSDL documents from the server the document is only partially served (estimated at about 2/3rds) or not at all (blank document returned).
Banner: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
The alert log gains this entry:
<msg time='2009-03-30T13:23:21.843-04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20' module=''
pid='16144'>
<txt>Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0x98] [PC:0x37FAE2B, _qmuwsPrintPackWSDL()+1031]
</txt>
</msg>
<msg time='2009-03-30T13:23:21.906-04:00' org_id='oracle' comp_id='rdbms'
msg_id='1205222838' type='INCIDENT_ERROR' group='Access Violation'
level='1' host_id='TEST_HOST1' host_addr='10.38.11.20'
prob_key='ORA 7445 [qmuwsPrintPackWSDL()+1031]' upstream_comp='' downstream_comp=''
ecid='' errid='62733' detail_path='c:\app\diag\rdbms\orcl\orcl\trace\orcl_s001_16144.trc'>
<txt>Errors in file c:\app\diag\rdbms\orcl\orcl\trace\orcl_s001_16144.trc (incident=62733):
ORA-07445: exception encountered: core dump [qmuwsPrintPackWSDL()+1031] [ACCESS_VIOLATION] [ADDR:0x98] [PC:0x37FAE2B] [UNABLE_TO_READ] []
</txt>
</msg>
<msg time='2009-03-30T13:23:21.953-04:00' org_id='oracle' comp_id='rdbms'
msg_id='dbgexProcessError:1094:3370026720' type='TRACE' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20'>
<txt>Incident details in: c:\app\diag\rdbms\orcl\orcl\incident\incdir_62733\orcl_s001_16144_i62733.trc
</txt>
</msg>
<msg time='2009-03-30T13:23:23.250-04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20' module=''
pid='3120'>
<txt>Trace dumping is performing id=[cdmp_20090330132323]
</txt>
</msg>
<msg time='2009-03-30T13:23:26.093-04:00' org_id='oracle' comp_id='rdbms'
msg_id='dbgrimswi_sweep_incident:1855:4220681759' type='ERROR' group='ami_comp'
level='8' host_id='TEST_HOST1' host_addr='10.38.11.20'>
<txt>Sweep Incident[62733]: completed
</txt>
</msg>
<msg time='2009-03-30T13:23:44.500-04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='TEST_HOST1' host_addr='10.38.11.20' module=''
pid='6724'>
<txt>found dead shared server 'S001', pid = (19, 3)
</txt>
</msg>The trace files contain the following:
Trace file c:\app\diag\rdbms\orcl\orcl\trace\orcl_s001_16144.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 16 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:10902M/24571M, Ph+PgF:8218M/26299M, VA:349M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 19
Windows thread id: 16144, image: ORACLE.EXE (S001)
*** 2009-03-30 13:23:21.828
*** SESSION ID:(129.4177) 2009-03-30 13:23:21.828
*** CLIENT ID:() 2009-03-30 13:23:21.828
*** SERVICE NAME:(SYS$USERS) 2009-03-30 13:23:21.828
*** MODULE NAME:() 2009-03-30 13:23:21.828
*** ACTION NAME:() 2009-03-30 13:23:21.828
Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0x98] [PC:0x37FAE2B, _qmuwsPrintPackWSDL()+1031]
Incident 62733 created, dump file: c:\app\diag\rdbms\orcl\orcl\incident\incdir_62733\orcl_s001_16144_i62733.trc
ORA-07445: exception encountered: core dump [qmuwsPrintPackWSDL()+1031] [ACCESS_VIOLATION] [ADDR:0x98] [PC:0x37FAE2B] [UNABLE_TO_READ] []I am at a loss on quickly resolving this issue. I will be attempting to find a solution via an SR, but I am not sure how responsive that will be. Any help is appreciated.
SR Number: 7504349.992Quick test for 11.1.0.7.0 (linux_x64) does not show a problem
SQL> connect sys/oracle as sysdba
Connected.
SQL> --
SQL> def USERNAME=WEB_API
SQL> --
SQL> def PASSWORD=WEB_API
SQL> --
SQL> DROP USER &USERNAME CASCADE
2 /
old 1: DROP USER &USERNAME CASCADE
new 1: DROP USER WEB_API CASCADE
DROP USER WEB_API CASCADE
ERROR at line 1:
ORA-01918: user 'WEB_API' does not exist
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old 1: grant connect, resource to &USERNAME identified by &PASSWORD
new 1: grant connect, resource to WEB_API identified by WEB_API
Grant succeeded.
SQL> begin
2 dbms_network_acl_admin.drop_acl('localhost.xml');
3 end;
4 /
begin
ERROR at line 1:
ORA-31001: Invalid resource handle or path name "/sys/acls/localhost.xml"
ORA-06512: at "XDB.DBMS_XDB", line 337
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 428
ORA-06512: at line 2
SQL> begin
2 dbms_network_acl_admin.create_acl('localhost.xml', 'ACL for 127.0.0.1', '&USERNAME', true, 'connect');
3 dbms_network_acl_admin.assign_acl('localhost.xml', '127.0.0.1');
4 end;
5 /
old 2: dbms_network_acl_admin.create_acl('localhost.xml', 'ACL for 127.0.0.1', '&USERNAME', true, 'connect');
new 2: dbms_network_acl_admin.create_acl('localhost.xml', 'ACL for 127.0.0.1', 'WEB_API', true, 'connect');
PL/SQL procedure successfully completed.
SQL> COMMIT
2 /
Commit complete.
SQL> GRANT XDB_WEBSERVICES TO &USERNAME
2 /
old 1: GRANT XDB_WEBSERVICES TO &USERNAME
new 1: GRANT XDB_WEBSERVICES TO WEB_API
Grant succeeded.
SQL> GRANT XDB_WEBSERVICES_OVER_HTTP TO &USERNAME
2 /
old 1: GRANT XDB_WEBSERVICES_OVER_HTTP TO &USERNAME
new 1: GRANT XDB_WEBSERVICES_OVER_HTTP TO WEB_API
Grant succeeded.
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> var url varchar2(700)
SQL> --
SQL> set pages 0 long 10000
SQL> --
SQL>
SQL> CREATE OR REPLACE TYPE ACCOUNT_O AS OBJECT
2 (
3 ACCOUNT_ID NUMBER(9, 0),
4 ACCOUNT_NUMBER VARCHAR2(100),
5 ACCOUNT_NAME VARCHAR2(50),
6 ACTIVE NUMBER(1, 0),
7 DEACTIVE_DATE DATE,
8 START_DATE DATE,
9 END_DATE DATE,
10 ROLLOVER_ACCOUNT_NUMBER VARCHAR2(100),
11 ROLLOVER_ACCOUNT_NAME VARCHAR2(50),
12 ROLLOVER_SPEED_CODE VARCHAR2(10),
13 LAST_UPDATE_DATE DATE
14 )
15 /
Type created.
SQL> CREATE OR REPLACE TYPE ACCOUNT_SK AS OBJECT( ACCOUNT_ID NUMBER(38) )
2 /
Type created.
SQL> CREATE OR REPLACE PACKAGE ACCOUNT_API AS
2 FUNCTION "NEW"(ACCOUNT_ID NUMBER,
3 ACCOUNT_NUMBER VARCHAR2,
4 ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
5 ACTIVE NUMBER DEFAULT NULL,
6 DEACTIVE_DATE DATE DEFAULT NULL,
7 START_DATE DATE DEFAULT NULL,
8 END_DATE DATE DEFAULT NULL,
9 ROLLOVER_ACCOUNT_NUMBER VARCHAR2 DEFAULT NULL,
10 ROLLOVER_ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
11 ROLLOVER_SPEED_CODE VARCHAR2 DEFAULT NULL,
12 LAST_UPDATE_DATE DATE DEFAULT NULL)
13 RETURN ACCOUNT_SK;
14 PROCEDURE "UPDATE"(ACCOUNT_ID NUMBER,
15 ACCOUNT_NUMBER VARCHAR2,
16 ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
17 ACTIVE NUMBER DEFAULT NULL,
18 DEACTIVE_DATE DATE DEFAULT NULL,
19 START_DATE DATE DEFAULT NULL,
20 END_DATE DATE DEFAULT NULL,
21 ROLLOVER_ACCOUNT_NUMBER VARCHAR2 DEFAULT NULL,
22 ROLLOVER_ACCOUNT_NAME VARCHAR2 DEFAULT NULL,
23 ROLLOVER_SPEED_CODE VARCHAR2 DEFAULT NULL,
24 LAST_UPDATE_DATE DATE DEFAULT NULL);
25 PROCEDURE "DELETE"(ACCOUNT_ID NUMBER);
26 FUNCTION "GET"(ACCOUNT_ID NUMBER) RETURN ACCOUNT_O;
27 END ACCOUNT_API;
28 /
Package created.
SQL> BEGIN
2 :url := 'http://&USERNAME:&[email protected]:' || dbms_xdb.getHttpPort() || '/orawsv/&USERNAME/ACCOUNT_API';
3 end;
4 /
old 2: :url := 'http://&USERNAME:&[email protected]:' || dbms_xdb.getHttpPort() || '/orawsv/&USERNAME/ACCOUNT_API';
new 2: :url := 'http://WEB_API:[email protected]:' || dbms_xdb.getHttpPort() || '/orawsv/WEB_API/ACCOUNT_API';
PL/SQL procedure successfully completed.
SQL> print url
http://WEB_API:[email protected]:80/orawsv/WEB_API/ACCOUNT_API
SQL> --
SQL> select httpuritype( :url || '?wsdl' ).getXML() from dual
2 /
<definitions name="ACCOUNT_API" targetNamespace="http://xmlns.oracle.com/orawsv/
WEB_API/ACCOUNT_API" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://
xmlns.oracle.com/orawsv/WEB_API/ACCOUNT_API" xmlns:xsd="http://www.w3.org/2001/X
MLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNamespace="http://xmlns.oracle.com/orawsv/WEB_API/ACCOUNT_
API" elementFormDefault="qualified">
<xsd:element name="UPDATEInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="START_DATE-DATE-IN" minOccurs="0" maxOccurs="1" t
ype="xsd:date"/>
<xsd:element name="ROLLOVER_SPEED_CODE-VARCHAR2-IN" minOccurs="0" ma
xOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NUMBER-VARCHAR2-IN" minOccurs="0
" maxOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0"
maxOccurs="1" type="xsd:string"/>
<xsd:element name="LAST_UPDATE_DATE-DATE-IN" minOccurs="0" maxOccurs
="1" type="xsd:date"/>
<xsd:element name="END_DATE-DATE-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:date"/>
<xsd:element name="DEACTIVE_DATE-DATE-IN" minOccurs="0" maxOccurs="1
" type="xsd:date"/>
<xsd:element name="ACTIVE-NUMBER-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:double"/>
<xsd:element name="ACCOUNT_NUMBER-VARCHAR2-IN" type="xsd:string"/>
<xsd:element name="ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0" maxOccurs
="1" type="xsd:string"/>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="UPDATEOutput">
<xsd:complexType>
<xsd:sequence>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="CACCOUNT_SK-NEWInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="START_DATE-DATE-IN" minOccurs="0" maxOccurs="1" t
ype="xsd:date"/>
<xsd:element name="ROLLOVER_SPEED_CODE-VARCHAR2-IN" minOccurs="0" ma
xOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NUMBER-VARCHAR2-IN" minOccurs="0
" maxOccurs="1" type="xsd:string"/>
<xsd:element name="ROLLOVER_ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0"
maxOccurs="1" type="xsd:string"/>
<xsd:element name="LAST_UPDATE_DATE-DATE-IN" minOccurs="0" maxOccurs
="1" type="xsd:date"/>
<xsd:element name="END_DATE-DATE-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:date"/>
<xsd:element name="DEACTIVE_DATE-DATE-IN" minOccurs="0" maxOccurs="1
" type="xsd:date"/>
<xsd:element name="ACTIVE-NUMBER-IN" minOccurs="0" maxOccurs="1" typ
e="xsd:double"/>
<xsd:element name="ACCOUNT_NUMBER-VARCHAR2-IN" type="xsd:string"/>
<xsd:element name="ACCOUNT_NAME-VARCHAR2-IN" minOccurs="0" maxOccurs
="1" type="xsd:string"/>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="NEWOutput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RETURN" type="tns:ACCOUNT_SKType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="CACCOUNT_O-GETInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="GETOutput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RETURN" type="tns:ACCOUNT_OType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="DELETEInput">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID-NUMBER-IN" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="DELETEOutput">
<xsd:complexType>
<xsd:sequence>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ACCOUNT_SKType">
<xsd:sequence>
<xsd:element name="ACCOUNT_SK">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ACCOUNT_OType">
<xsd:sequence>
<xsd:element name="ACCOUNT_O">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ACCOUNT_ID" type="xsd:double"/>
<xsd:element name="ACCOUNT_NUMBER">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="100"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ACCOUNT_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ACTIVE" type="xsd:double"/>
<xsd:element name="DEACTIVE_DATE" type="xsd:date"/>
<xsd:element name="START_DATE" type="xsd:date"/>
<xsd:element name="END_DATE" type="xsd:date"/>
<xsd:element name="ROLLOVER_ACCOUNT_NUMBER">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="100"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ROLLOVER_ACCOUNT_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ROLLOVER_SPEED_CODE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LAST_UPDATE_DATE" type="xsd:date"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</types>
<message name="UPDATEInputMessage">
<part name="parameters" element="tns:UPDATEInput"/>
</message>
<message name="UPDATEOutputMessage">
<part name="parameters" element="tns:UPDATEOutput"/>
</message>
<message name="NEWInputMessage">
<part name="parameters" element="tns:CACCOUNT_SK-NEWInput"/>
</message>
<message name="NEWOutputMessage">
<part name="parameters" element="tns:NEWOutput"/>
</message>
<message name="GETInputMessage">
<part name="parameters" element="tns:CACCOUNT_O-GETInput"/>
</message>
<message name="GETOutputMessage">
<part name="parameters" element="tns:GETOutput"/>
</message>
<message name="DELETEInputMessage">
<part name="parameters" element="tns:DELETEInput"/>
</message>
<message name="DELETEOutputMessage">
<part name="parameters" element="tns:DELETEOutput"/>
</message>
<portType name="ACCOUNT_APIPortType">
<operation name="UPDATE">
<input message="tns:UPDATEInputMessage"/>
<output message="tns:UPDATEOutputMessage"/>
</operation>
<operation name="NEW">
<input message="tns:NEWInputMessage"/>
<output message="tns:NEWOutputMessage"/>
</operation>
<operation name="GET">
<input message="tns:GETInputMessage"/>
<output message="tns:GETOutputMessage"/>
</operation>
<operation name="DELETE">
<input message="tns:DELETEInputMessage"/>
<output message="tns:DELETEOutputMessage"/>
</operation>
</portType>
<binding name="ACCOUNT_APIBinding" type="tns:ACCOUNT_APIPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/ht
tp"/>
<operation name="UPDATE">
<soap:operation soapAction="UPDATE"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
<operation name="NEW">
<soap:operation soapAction="NEW"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
<operation name="GET">
<soap:operation soapAction="GET"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
<operation name="DELETE">
<soap:operation soapAction="DELETE"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
</binding>
<service name="ACCOUNT_APIService">
<documentation>Oracle Web Service</documentation>
<port name="ACCOUNT_APIPort" binding="tns:ACCOUNT_APIBinding">
<soap:address location="http://127.0.0.1/orawsv/WEB_API/ACCOUNT_API"/>
</port>
</service>
</definitions>But I think you said it was intermittant -
Netscape Directory Server core dumps
Hi,
I have NDS version 5.1 running on Solaris 10. My software is querying the LDAP at around 10-15 requests/sec. The LDAP memory is runnig at around 50M. (I have around 900 entries in the LDAP tree). At some random instance of time, the LDAP memory shoots up from 50M to 3.2 GB when it goes out of memory and then restarts. My software has a LDAP connection pool to it and one of the threads goes OutOfmemory after the error.
The LDAP does a core dump during the process. From the analysis of the core dump, it seems that it is trying to access some memory which is not part of the LDAP process map.
bash-3.00$ mdb core
mdb: failed to initialize /lib/libc_db.so.1: libthread_db call failed unexpectedly
mdb: warning: debugger will only be able to examine raw LWPs
Loading modules: [ libc.so.1 libuutil.so.1 ld.so.1 ]
::stacklibc_psr.so.1`memcpy+0x234(87c00038, 6b646174, 74776f6a, 8, 6b646174, 0)
libslapd.so`slapi_dup_control+0x94(53db678, 2ce38f8, fc93ff2c, 0, 2ce38f8,2ce38f8)
0x2f3b4(7e55c80, 2f30150, 2ce6bb8, 4c7fde8, 2f30150, ffffffff)
0xfef17d18(2f60164, fc940000, 0, 0, fef17c74, 1)
0xff2c8a20(0, 0, 0, 0, 0, 0)
::statusdebugging core file of ns-slapd (32-bit) from XXXXXX
initial argv:XXXXXXXX
threading model: multi-threaded using native lwps
status: process terminated by SIGSEGV (Segmentation Fault)
>
The failure is at address 0xfee8063c.
0xfee8063c::dislibc_psr.so.1`memcpy+0x20c: 0x2480012
libc_psr.so.1`memcpy+0x210: nop
libc_psr.so.1`memcpy+0x214: ldub [%i1], %o2
libc_psr.so.1`memcpy+0x218: stb %o2, [%i0]
libc_psr.so.1`memcpy+0x21c: add %i1, 1, %i1
libc_psr.so.1`memcpy+0x220: subcc %i3, 1, %i3
libc_psr.so.1`memcpy+0x224: 0x184ffffc
libc_psr.so.1`memcpy+0x228: add %i0, 1, %i0
libc_psr.so.1`memcpy+0x22c: ba +0x60 <libc_psr.so.1`memcpy+0x28c>
libc_psr.so.1`memcpy+0x230: nop
libc_psr.so.1`memcpy+0x234: ld [%i1], %o2
libc_psr.so.1`memcpy+0x238: st %o2, [%i0]
libc_psr.so.1`memcpy+0x23c: add %i1, 4, %i1
libc_psr.so.1`memcpy+0x240: subcc %i3, 4, %i3
// Looking for register i1
::regs%g0 = 0x00000000 %l0 = 0x87c00038
%g1 = 0xff37c840 libsh.so`_shi_sysAllocPool+0xd4 %l1 = 0xff16c2bc
%g2 = 0x00000000 %l2 = 0x07970778
%g3 = 0x0000036c %l3 = 0x05410000
%g4 = 0x00000001 %l4 = 0xff165a34
%g5 = 0x87c00038 %l5 = 0x00000000
%g6 = 0x00000000 %l6 = 0x01000000
%g7 = 0xfd06ca00 %l7 = 0x00000004
%o0 = 0x87c00038 %i0 = 0x87c00038
%o1 = 0x74776f72 %i1 = 0x6b646174
%o2 = 0xefe4617c %i2 = 0x74776f6a
%o3 = 0x00000002 %i3 = 0x00000008
%o4 = 0x00000002 %i4 = 0x6b646174
%o5 = 0x053d9c28 %i5 = 0x00000000
%o6 = 0xfc93fe00 %i6 = 0xfc93fe60
%o7 = 0xff0c0c44 libslapd.so`slapi_ch_malloc+0x64 %i7 = 0xff0e8e78
libslapd.so`slapi_dup_control+0x94
%psr = 0xfe401004 impl=0xf ver=0xe icc=nZvc
ec=0 ef=4096 pil=0 s=0 ps=0 et=0 cwp=0x4
%y = 0x00000002
%pc = 0xfee8063c libc_psr.so.1`memcpy+0x234
%npc = 0xfee80640 libc_psr.so.1`memcpy+0x238
%sp = 0xfc93fe00
0x6b646174::dismdb: failed to read instruction at 6b646174: no mapping for address
>
The register "i1"'s content was memory address 0x6b646174 which is not part of process address space.
Has anyone experienced similar problem before? I was trying to find the same in the forum but without any luck. This problem is happening quiet regularly.Seeems like content of register i1 got missed.. here is the content..
%l2 = 0x07970778
%l3 = 0x05410000
%l4 = 0xff165a34
%l5 = 0x00000000
%l6 = 0x01000000
%l7 = 0x00000004
%i0 = 0x87c00038
%i1 = 0x6b646174
%i2 = 0x74776f6a
%i3 = 0x00000008
%i4 = 0x6b646174
%i5 = 0x00000000
%i6 = 0xfc93fe60 -
C++ Tux 6.4 server core dumping when throwing exception
We are having a problem inside a Tux 6.4 server written in C++ on a Solaris box.
Whenever an exception is thrown, the program dumps core. (The same program transformed
into a standalone C++ program functions normally.)
Has anyone else had similar problems??
Is there something that we need to do to avoid the problem??
Please email me responses and I will post a summary.
adTHANKSvance.Morrie Kahn wrote:
>
We are having a problem inside a Tux 6.4 server written in C++ on a Solaris box.
Whenever an exception is thrown, the program dumps core. (The same program transformed
into a standalone C++ program functions normally.)
Has anyone else had similar problems??
Don't know whether it could be the same problem, but using Tuxedo 6.5 /
Tru64, throwing any exception caused some strange message to occur (sth.
about locking) and the program abort.
After I prepared some test, BEA provided the patch which helped. -
Core dump when stop sun one web server 6.1 SP6
Hi all,
I install the sun one web server 6.1 sp6 and run as FastCGI mode. Each time i stop the web server, the "core" file is generated. The following is the steps which I setup the web server:
Server Path: /i03_01/SUNTest
1. Install Sun One Web Server 6.1 SP6
2. Install FastCGI library
3. Install php4.4.2
./configure prefix=/i03_01/php-fcgi enable-fastcgi
make
make install
4. copy the php binrary to /i03_01/SUNTest/bin
5. vi magnus.conf
Init fn=load-modules shlib="/i03_01/fastcgisp4/plugins/fastcgi/libfastcgi.so"
6. vi mime.types
type=magnus-internal/fastcgi exts=php
7. vi obj.conf
<Object name="default">
Service type="magnus-internal/fastcgi"
fn="responder-fastcgi"
app-path="/i03_01/SUNTest/bin/php"
max-procs="20"
app-env="PHP_FCGI_CHILDREN=2"
app-env="PHP_FCGI_MAX_REQUEST=1000"
restart-interval="60"
app-env="PHPRC=/i03_01/SUNTest/https-www/config"
</Object
8. Start the Web Server
9. Open the browser, run any php programs. (the php process will be created at this time)
10. Stop the web server (* core file is generated at /i03_01/SUNTest/https-www/config)
Here are the error logs:
1. /var/adm/messages
Dec 15 15:05:54 hkpu30 genunix: [ID 603404 kern.notice] NOTICE: core_log: Fastcgistub[17146] core dumped: /var/cores/Fastcgistub.hkpu30.17146.core
2. Fastcgistub.log
<<<<<< ERROR LOG >>>>>>
Fastcgistub - version (1)
created child - 17492
clean stub
stopping child exit handler
stopping monitoring
terminating child - 17492
3. pstack core file
core 'core' of 17491: Fastcgistub -b /tmp/https-hkpu30.polyu.edu.hk-e7343eaa/Fastcgistub_174
fee07f70 fprintf (0, 18ef0, fee43a54, ffbef3c0, 0, 49db8) + 34
000172d4 __1cNserveRequests6F_v_ (9c, 0, 4c, 18ebc, 18f02, 0) + 260
00017aec main (bc, ffbef624, 0, 299bc, 18f35, 299b8) + 4f8
00012f34 _start (0, 0, 0, 0, 0, 0) + 108
Any one can help me?
Thanks.This has been fixed. But the plugin whch contains the fix (as part of Web Server 6.1) is not available for download yet.
Meanwhile, you can try using the FastCGI plugin bundled with Web Server 7.0 Techonology Preview ( http://www.sun.com/download/products.xml?id=446518d5 ) -
XMLType table Core Dump using CLOB
I've created an object based XMLType table based on a valid XML Schema. The Schema has an element which has been declared as a CLOB.
<xs:element name="complete_entry" xdb:SQLType="CLOB" xdb:SQLName="complete_entry"/>
This registers ok with Oracle and the object that this element is in shows the element as a CLOB as expected.
However when performing a insert into this table, SQLPlus gives and end-of-communication error and the server core dumps.
A PL/SQL function retreives an XML file from the file system for insert, here is the code for the function:
create or replace function getClobDocument(
filename in varchar2,
charset in varchar2 default NULL)
return CLOB deterministic
is
file bfile := bfilename('DIR',filename);
charContent CLOB := ' ';
targetFile bfile;
lang_ctx number := DBMS_LOB.default_lang_ctx;
charset_id number := 0;
src_offset number := 1 ;
dst_offset number := 1 ;
warning number;
begin
if charset is not null then
charset_id := NLS_CHARSET_ID(charset);
end if;
targetFile := file;
DBMS_LOB.fileopen(targetFile, DBMS_LOB.file_readonly);
DBMS_LOB.LOADCLOBFROMFILE(charContent, targetFile,
DBMS_LOB.getLength(targetFile), src_offset, dst_offset,
charset_id, lang_ctx,warning);
DBMS_LOB.fileclose(targetFile);
return charContent;
end;
The function is called like so:
INSERT INTO boss_contracts
VALUES(XMLTYPE(getCLOBDocument('contract_82.xml','UTF8')));
This works perfectly when the element is declared as a string and Oracle converts it to a varchar2(4000), but core dumps when it is a CLOB.
I need this element to be able to handle more than 4k of data.
please help,
Paul Linney
[email protected]void print_affect(struct oci_connection* conn, OCIStmt* sh) {
sb2 rowCount;
ub4 sizep = sizeof(sb2);
OCIAttrGet(sh, OCI_HTYPE_STMT,&rowCount,
&sizep,OCI_ATTR_ROW_COUNT, conn->err);OCI_ATTR_ROW_COUNT is a ub4 attribute, not a sb2 one.
ub4 rowCount = 0;
ub4 size = sizeof(rowCount);
--DD -
Error message upgrading Sun One Web Server
We currently use Sun One Web Server SP 4. I have a RSA Cleartrust Agent to install that specifies SP 5. I downloaded SP 7. When I try to install it I receive the following message - "A previous release of the Web Server has been detected in the server root. Please select a different server root." I tried stoppping all the services, then installing, same result. The documentation says to run the install, it would detect the previous version and install. Do I have to uninstall the previous version? I do not want to do that. Thanks in advance.
Jimadmin.inf
[General]
Name=Administration Services
Components=admin,admin-client
Checked=TRUE
Description=Server Administration Services used by system administrators to manage all iPlanet Servers.
[admin]
DefaultAcceptLanguage=en
Vendor=Sun | Netscape Alliance
Name=iPlanet Administration Server
NickName=admin
Description=Provides services to other server products.
Dependencies=base/5.1
Version=5.1
Revision=
Compatible=4.0
Security=domestic
BuildNumber=2002.158.2342
Registration=FALSE
Checked=TRUE
IsAdmin=TRUE
UseLDAP=TRUE
BackupFiles=/admin-serv/config/adm.conf
Mandatory=FALSE
#install files for admin
System32Archive=
Archive=admin.z
#plugin dll section
PlugIn=insadm.dll
ReadInf=ADM_ReadComponentInf
PreInstall=ADM_PreInstall
AskOptions=ADM_AskOptions
GetSummary=ADM_GetSummary
WriteGlobalCache=ADM_WriteGlobalCache
WriteLocalCache=ADM_WriteLocalCache
ReadGlobalCache=ADM_ReadGlobalCache
ReadLocalCache=ADM_ReadLocalCache
PostInstall=ADM_PostInstall
PostUnInstall=ADM_PostUnInstall
PreUnInstall=ADM_PreUnInstall
[admin-client]
Dependencies=base-client/5.1
Name=Management Console
Description=Used by system administrators to manage other server products.
Version=5.1
Compatible=4.0
BuildNumber=2002.158.2342
IsMCC=TRUE
Checked=TRUE
Mandatory=FALSE
Security=domestic
#install files admin-client component
Archive=console.z
#plugin dll section
PlugIn=insadm.dll
PreInstall=CON_PreInstall
PostInstall=CON_PostInstall
PostUnInstall=CON_PostUnInstall
PreUnInstall=CON_PreUnInstall
WebServer.inf
[General]
Name=iPlanet Web Server, Enterprise Edition
Plugin=WebServer\WebServer.dll
Description=iPlanet Web Server, Enterprise Edition
Checked=True
Components=NESCore,JRE,Java,Search,SNMP,I18N,CleanUp
[NESCore]
Vendor=Sun Netscape Alliance
Name=Server Core
Description=iPlanet Web Server Core
Nickname=nescore
Version=6.0
BuildNumber=2
Compatible=4.0
Dependencies=svrcore/4.2
DefaultAcceptLanguage=en
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=TRUE
IsAdmin=FALSE
UseLdap=FALSE
SourcePath=WebServer
Archive=nescore.zip
System32Archive=nescore32.zip
Plugin=WebServer\WebServer.dll
PreInstall=SvrCore_PreInstall
AskOptions=SvrCore_AskOptions
WriteGlobalCache=SvrCore_ReadGlobalCache
ReadGlobalCache=SvrCore_ReadGlobalCache
ReadLocalCache=SvrCore_ReadLocalCache
WriteLocalCache=SvrCore_WriteLocalCache
GetSummary=SvrCore_GetSummary
PostInstall=SvrCore_PostInstall
PostUnInstall=SvrCore_PostUninstall
[JRE]
Name=Java Runtime Environment
Description=Java Runtime Environment
Nickname=JRE
Version=1.1
BuildNumber=2
Compatible=1.1
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=True
SourcePath=WebServer
Archive=jre.zip
PlugIn=WebServer\WebServer.dll
PreInstall=JVM_PreInstall
AskOptions=JVM_AskOptions
GetSummary=JVM_GetSummary
PostInstall=JVM_PostInstall
[Java]
Name=Java and Servlets
Description=iPlanet Web Server Java and Servlets Support
Nickname=java
Version=6.0
BuildNumber=2
Compatible=4.0
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=True
SourcePath=WebServer
Archive=java.zip
PlugIn=WebServer\WebServer.dll
PreInstall=Java_PreInstall
GetSummary=Java_GetSummary
WriteLocalCache=Java_WriteLocalCache
ReadLocalCache=Java_ReadLocalCache
PostInstall=Java_PostInstall
[Search]
Name=Search and Indexing
Description=iPlanet Web Server Search and Indexing Support
Nickname=search
Version=6.0
BuildNumber=1
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=False
SourcePath=WebServer
Archive=search.zip,searchdata.zip
PlugIn=WebServer\WebServer.dll
PreInstall=WebPub_PreInstall
WriteLocalCache=WebPub_WriteLocalCache
PostInstall=WebPub_PostInstall
[SNMP]
Name=SNMP
Description=iPlanet Web Server SNMP Support
Nickname=snmp
Version=6.0
BuildNumber=1
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=False
SourcePath=WebServer
Archive=snmp.zip
PlugIn=WebServer\WebServer.dll
PreInstall=SNMP_PreInstall
PostInstall=SNMP_PostInstall
[I18N]
Nickname=i18n
Name=I18N Support
Version=6.0
Compatible=4.0
Expires=0
Checked=True
Mandatory=True
Visible=False
SourcePath=WebServer
Archive=i18n-core.zip
UseLDAP=False
Description=iPlanet Web Server Internationalization Support
Registration=FALSE
Plugin=WebServer\WebServer.dll
PreInstall=I18N_PreInstall
AskOptions=I18N_AskOptions
WriteLocalCache=I18N_WriteLocalCache
GetSummary=I18N_GetSummary
PostInstall=I18N_PostInstall
defLang=en,ja
en=�p��
ja=���{��
[CleanUp]
Name=Upgrade Files
Description=iPlanet Web Server Upgrade Files
Nickname=cleanup
Version=6.0
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=True
Visible=False
SourcePath=WebServer
Archive=nescore.zip
PlugIn=WebServer\WebServer.dll
PreInstall=Cleanup_PreInstall
AskOptions=Cleanup_AskOptions
GetSummary=Cleanup_GetSummary
WriteLocalCache=Cleanup_WriteLocalCache
PostInstall=Cleanup_PostInstall -
Sun ONE Web Server 6.1SP2 B04/07/2004 core dump enablement
What is the procedure to enable core dump for future analysis? Earlier versions code changes for magnus.conf does not seem to work!
What magnus.conf changes are you trying?
If its a non secure(no SSL) 6.1 web server running on solaris 8 or later the following coreadm settings should allow core dump creation:
# coreadm
global core file pattern:
init core file pattern: core.%p
global core dumps: disabled
per-process core dumps: enabled
global setid core dumps: disabled
per-process setid core dumps: enabled
global core dump logging: disabled
To set the coreadm options as shown above, refer to man pages of coreadm command.
Thanks
Manish -
Cannot start BI server, cannot start cluster successfully, core dumped
Hi
I have the following configuration. The four machines are virtualized containers on solaris sparc
machine 1 - PS, java host, web logic
machine 2 - PS, java host, web logic
machine 3 - bi server, primary cluster controller, scheduler
machine 4 - bi server, secondary cluster controller, scheduler
However i dont need the scheduler and i have not configured them completely
I was able to successfully test on compete stack with no clustering and used only machines 1 and 3. I was able to login to the sample URL and see some graphs.
The problem started once i was trying the clustering. I looked at the admin docs and the installation and deployment guides and followed the instructions and carefully did the configuration.
I face multiple problems.
In single stack some time the BI server was randoly stopping itself for no reason after starting it. it was very random that i used to feel happy if it does not stop.
During clustering i was not able to start the cluster successfully at all. I did not want to worry about scheduler to start with and even the PS. I just wanted to connect to the BI server using the primary ccs and using the admin tool in the windows machine.
Today morning i tried to start the BI server and then there was a core dump in both the machines and then i am not even able to start the server at all. There was nothing in the log files and i dont know what to do.
The log files before the core dump as follows.
server log file
2009-07-30 18:18:47
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 18:18:49
[14055] Loading subject area: Sample Sales ...
2009-07-30 18:18:49
[14056] Finished loading subject area: Sample Sales.
2009-07-30 18:18:49
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 18:18:49
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 18:19:11
[43031] : Oracle BI Server shutdown.
2009-07-30 18:19:12
[58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
2009-07-30 18:19:12
[14058] Unloaded all subject areas.
2009-07-30 18:25:25
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 18:25:27
[14055] Loading subject area: Sample Sales ...
2009-07-30 18:25:27
[14056] Finished loading subject area: Sample Sales.
2009-07-30 18:25:27
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 18:25:27
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 18:26:25
[43071] A connection with Cluster Controller maa-zone4:9706 was established.
2009-07-30 18:30:08
[nQSError: 12002] Socket communication error at call=recv: (Number=131) Connection reset by peer
2009-07-30 18:30:08
[nQSError: 12002] Socket communication error at call=recv: (Number=131) Connection reset by peer
2009-07-30 20:57:24
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 20:57:26
[14055] Loading subject area: Sample Sales ...
2009-07-30 20:57:26
[14056] Finished loading subject area: Sample Sales.
2009-07-30 20:57:26
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 20:57:26
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 20:58:39
[43031] : Oracle BI Server shutdown.
2009-07-30 20:58:39
[58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
2009-07-30 20:58:39
[14058] Unloaded all subject areas.
2009-07-30 21:01:40
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 21:01:42
[14055] Loading subject area: Sample Sales ...
2009-07-30 21:01:42
[14056] Finished loading subject area: Sample Sales.
2009-07-30 21:01:42
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 21:01:42
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 21:08:51
[43071] A connection with Cluster Controller maa-zone4:9706 was established.
2009-07-30 21:10:31
[43065] The connection with Cluster Controller maa-zone4:9706 was lost.
2009-07-30 21:12:59
[43071] A connection with Cluster Controller maa-zone4:9706 was established.
:x
$ ls
cluster controller log file
2009-07-30 21:12:59
[71008] Cluster Controller started. Version: 10.1.3.4.1.090414.1900
2009-07-30 21:12:59
[71021] An attempt to establish a connection with Oracle BI Server maa-zone03:9703 failed.
2009-07-30 21:12:59
[71020] A connection with Oracle BI Server maa-zone4:9703 was established.
2009-07-30 21:12:59
[71010] Oracle BI Server maa-zone4:9703 has transitioned to ONLINE state.
2009-07-30 21:13:14
[71050] This Cluster Controller is promoted to Controlling because there has been no recent contact from
the Primary Cluster Controller.
2009-07-30 21:13:14
[71071] An attempt to establish a connection with Oracle BI Scheduler maa-zone03:9705 failed.
2009-07-30 21:13:14
[71068] Oracle BI Scheduler maa-zone03:9705 has transitioned to OFFLINE state.
2009-07-30 21:13:14
[71071] An attempt to establish a connection with Oracle BI Scheduler maa-zone4:9705 failed.
2009-07-30 21:13:14
[71068] Oracle BI Scheduler maa-zone4:9705 has transitioned to OFFLINE state.
2009-07-30 23:10:34
[71019] The connection with Oracle BI Server maa-zone4:9703 was lost.
2009-07-30 23:10:34
[71011] Oracle BI Server maa-zone4:9703 has transitioned to OFFLINE state.
2009-07-30 23:10:39
[71021] An attempt to establish a connection with Oracle BI Server maa-zone4:9703 failed.
your help is appreciated.
thanks
chaitanya kadaruall the four machines are four containers in a solaris server.
The problem was with the hosts file, there were not entries matching the ipaddress and the hotname.
After i fixed it now i have a stable BI servers and cluster controllers.
Now i configured the presentation services to connect to the BI servers but i am getting the following exception.
Type: Error
Severity: 42
Time: Thu Aug 6 13:04:02 2009
File: project/webcomm/socket.cpp Line: 892
Properties: ThreadID-6
Location:
saw.rpc.client.impl.verify
saw.rpc.client.impl.initFixedRPC
saw.rpc.client.cluster
saw.threads
An error occurred during execution of "connect". Connection refused [Socket:15]
Any idea?
thanks -
Report Server: RTF format on Solaris gives Core Dump
We have Report Server 6.0.8.11.2 on Solaris.
We are running reports thru URL and it is working fine for PDF and HTML. When we specify the desformat as RTF it gives Segmentation Fault Core dumped.
We have tried using rwcli60 thru command line and it gives the same error, while PDF and HTML format is fine.
Is there a patchset for Solaris for the same or are we missing on some parameter?
- TarunHi I am a beginner to solaris and am trying to install Sun ONE Application Server on the virtual machine which runs Solaris10 on X86. When I try to launch the executable bin file, i get a message saying Killed.
It seems like it is not initiating the executable. ANy comments would be appreciated
thanks
nash -
Redhat 6.0 Webdb 2.2 Server 8.1.5 sqlplus core dump segmentation fault solution
If anyone else is struggling with this installation, heres a workaround that
Got things going for me.
Redhat 6.0
Oracle 8.1.5
Webdb 2.2
The database was up and working fine. Not as many problems as earlier versions but there was still much grief getting it to work. Save yourself some time, dont charge ahead like I did, read the installation notes.
The installation of Webdb didnt go so well though. Sqlplus would core dump with segmentation fault when a connection to the local instance was attempted. I tried many things, install webdb to 8.1.5 , apply glibc patch, apply 8.0.5 patches to webdb install none of this worked. The workaround I finally found was to use the 8.1.5 listener and the old formatting of a listener.ora and tnsnames.ora file. (i.e. like 7.3.x). Sqlplus would then connect via tcp. Installation still had another problem I could never get past the sys password confirmation. I could connect from the command line with sqlplus s /nolog @passwd.sql sys/mypass@mytnsname but the installer just wouldnt work. An edit of the installation_dir ->webdb-2.2/owa40/owa40.vrf file did the trick. Hard code a location to a dummy pass.sys file.
After many frustrating hours 160 or so - I think I finally have a working database and a working webdb web site. Hope this info might help others.
Craig MacPherson
nullo Did you end up with 8.1.5 and WebDB2.2 in different Oracle_homes?
Yes - product/8.1.5
- product/8.0.5
o What do you mean that you used the 8.1.5 listener? My database is 8.1.5 so the tnslistener I'm using is from the 8.1.5 install - not the 8.0.5 version.
o Can you send a sample of the tnsnames.ora file that you used?
Sure - make sure you set TNS_ADMIN
# Filename: Listener.ora
LISTENER =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= 139.142.231.213)(Port= 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= /oracle/product/8.1.5)
(SID_NAME = cmac)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
# Filename: Tnsnames.ora
cmac =
(DESCRIPTION =
(ADDRESS = (PROTOCOL= TCP)(Host= 139.142.231.213)(Port= 1521))
(CONNECT_DATA = (SID = cmac))
test =
(DESCRIPTION =
(ADDRESS = (PROTOCOL= TCP)(Host= dmac)(Port= 1521))
(CONNECT_DATA = (SID = cmac))
null -
I am using Communicator Pro with Enterprise Calendaring, Calendar client 4.6,
and when I attempt to launch it I immediately get a core dump and it does not
launch.
<P>
The 4.6 motif client is not able to run against the 4.0 Calendar Server.
It is strongly recommended that you use the 4.61 motif Calendar client (bundled with the 4.7
Communicator Pro release) or 4.51/4.52 against Calendar Server 4.0. There are
known problems when going offline while using the 4.5 client on any platform
against the 4.0 Server. Both the 4.51 Windows and the 4.52 motif clients have
repaired this problem.You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
-
Report Server RTF on Solaris gives Core Dump
We have Report Server 6.0.8.11.2 on Solaris.
We are running reports thru URL and it is working fine for PDF and HTML. When we specify the desformat as RTF it gives Segmentation Fault Core dumped.
We have tried using rwcli60 thru command line and it gives the same error, while PDF and HTML format is fine.
Is there a patchset for Solaris for the same or are we missing on some parameter?
- TarunHiya,
Any resolution to this post , we have a native JNI call on a Websphere server running on Solaris 8 .. and same thing happening .. random core dump on the box ..
No warning , no explanation
Thanks so much for your help
(btw . running Sun jvm 1.4.2_13) -
Core dump are creates even though my server does not crash
I am having an issue with a large number of core dump files getting generated by jrockit that occupies the disk space daily almost 8 files are generated of size 150 to 800 MB
However, what amazes me is that the weblogic server does not crash
I have also checked the logs there where certain errors but not something that could crash my servers and the weblogic server was running all the time.
I know I can stop the generation of core dump files by using ulimit. But if I do so and if my Jrockit crashes It wont generate the core dump file that would be needed
My configuration is
a) WLS Version:10.3.2.0
b) OS Type: Oracle Solaris 10 on SPARC (64-bit)
c) JDK Vendor & Version: BEA JRockit(R) (build R27.6.5-32_o-121899-1.6.0_14-20091001-2106-solaris-sparcv9
Any help is greatly appreciated
As the files are taking up all the spaceDid you get a solution for this issue ? I have the same HD which works fine on two other Mac Book pros (Snow leopard and mountain Lion) but does not work on a brand new mac book pro with Mavericks
Maybe you are looking for
-
Simple File Rename- is there an on/off switch
Over many weeks I have done simple renames of filenames when in Edit or Grid by clicking the File Name in the Right Hand Panel, changing the name or cut and pasting parts of the name to other pictures. Suddenly I cant do this any more. When I click o
-
How can i be make call and receive on ipad 1
please help,how can i make calls receive with my ipad 1
-
Select row and column from header in jtable
hello i have a problem to select row and column from header in jtable.. can somebody give me an idea on how to write the program on it.
-
Multibyte characters(Chinese Data)
Hi, We have a table in oracle(10g) which stores Chinese data as well English characters. Production is designed in such a way that, we can' t increase size of the columns. Is there any way to handle multi-byte characters like Chinese with the same le
-
I cant alter the max volume in settings as there is no lock tab showing
i have tried to change the max lolume on my daughters i pod touch. the unlock tab is not there unlike her sisters one. the volume is set very low but it only effects then headphones are pluged in. volume thru the inbuilt speakers is ok.