Web server works externally, but not internally

Hi I'm kind of new to this.
I got my web server working exteranlly, but within my internal network, the webserver only works if I input the actual ip address and not www.example.com.
I have a Cisco RVS4000 set as a gateway and a Mac Mini with Server App 10.8x. My guess is that I have to enable some port. I followed the well known TCP/UDP Ports (https://discussions.apple.com/article/TS1629), but I still can't get it to work internally.
Any thoughts on why it's not working interanlly?
Thank you,

Lol...After fixing one issue, another one came up. This time it has to do with the name I am using. For example:
www.exmaple.com and tm1.example.com (both are hosted with different ips)
Since they are both using the same name: exmaple.com, I cannot access the www.exmaple.com, but I can access the tm1.example.com
You have been a great help John, is there anyway to fix this?
Thank you

Similar Messages

Port forwarding externally but not internally

I've got an AExtremeBS at home and at work. I've been port forwarding http for a while with no problems internally or externally. I've recently configured a new web server which internally is hosted on port 80. I've enabled port forwarding from 8080 to 80 on the AEBS and it works fine externally. However, if I try to browse the site internally using the FQDN:8080 of my AEBS, it does not work.
I can check both external and internal and the external is still working while the internal is not.
Any ideas?
One idea would be to move my internal listener to 8080 and just port forward 8080 to 8080 (I would just redirect 8080 to the internalIP:8080 rather than map 8080 to internal:80).
Thanks,
sid.

You might be onto something....but it's probably not what you think, but then again, I just confused myself again.
To get OD working I had to add my Leopard Server to my DNS settings. The Leopard Server required that it resolves the FQDN of the AEBS to itself (the internal IP address). However, everything else on the network resolves the FQDN to the external IP address.
If I nslookup on my FQDN, from my mac (which has the Leopard Server as it's DNS server) I get the internal IP address of the Leopard Server. However, if I go to another machine inside my network which does not query DNS from the Leopard Server, I get my external IP and when I browse to extneral:8080 it port forwards correctly. So it wasn't the AEBS, it was my particular mac and freaking Leopard Server.
So, it's settled, Leopard Server strikes again. I can't believe that Apple released this POS. I had a much easier time with Ubuntu 6.06 on my old 300 MHz blueberry iMac.

Mini boots with new cloned drive externally, but not internally.

Hi.
I bought a new, bigger and faster HD for my early 2009 Mac mini (10.8.2) and cloned my original drive with Carbon Copy Cloner, making sure to include the hidden recovery partition. Using a USB to SATA adapter, I can boot from the new drive no problem. However, when I open up the mini and replace the old drive with the new one, all I get is the folder with question mark that blinks. I've tried holding down option when rebooting to get to the recovery partition, but all I get is the WiFi log in, no drives or any other options to choose from. If my Time Machine drive is connected, that does appear but fails to do anything if I click on it. (When the old drive is in, I can access the new drive just fine, and can even boot into the new drive's recovery mode.) Is there some step I'm missing, or some troubleshooting I can do that I'm not aware of?
Thanks.

RRFS wrote:
It sounds as though the connector for your drive didn't get seated properly.
If by that you mean it wasn't secure inside the computer, you could be right, but I pulled the drive in and out three separate times as I opened and closed the machine to exchange the old and new drives a few times and always tried to make sure it was nice and snug in there.
Thanks for the response.

cffeed caching works locally but not on server

So I got my new Hostek account set up (woohoo!) and I've started uploading some basic files so I can do thinks like validate my code and make sure everything's working. One thing that does not work (but does locally) is my news feed caching.
Pulling in two RSS feeds was seriously slowing down my index page loading, so I stole a trick from Ray Camden on caching the feeds. It works perfectly on my dev machine at home, but doesn't work on my hosted account.
Here's the exact code being used:
<cfset feedurl = "http://velonews.competitor.com/feed">
<cfset cacheTime = #createtimespan(1,0,0,0)#>
<cfif not structKeyExists(application,"rsscache") or dateDiff("n", application.rsscache.created, now()) gt cacheTime>
    <cffeed source="#feedurl#" query="entries">
    <cfset application.rsscache = structNew()>
    <cfset application.rsscache.data = entries>
    <cfset application.rsscache.created = now()>
</cfif>
<ul>
<cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
<cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
</cfloop>
</ul>
I tried wrapping a try/catch around the top section (above the <ul>) and still got nothing for an error message. The page just stops being rendered at that first <ul>.
I'm not sure why it works locally but not on the web server. Any ideas?

Miraculously, I got it working.
I changed this:
<cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
<cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
</cfloop>
To this:
<cfoutput maxrows="6" query="application.rsscache.data">
<li><a href="#rsslink#">#title#</a></li>
</cfoutput>
And bingo! It worked. Perhaps it's an idiosyncrasy between CF9 and CF10.

Flash site works locally but not online (uploaded to server)

We have bought a flash portfolio template and have customized it with our pictures, video, etc.
When we test it locally on our computer (using different web browsers) it all works perfectly well. We have uploaded the finished website to our server and when you go to the address online, it doesn't work (a loader progress shows but it is stopped and nothing happens).
We have however uploaded the original template we bought and it works perfectly online.
The template consists of and index.html, various .swf, and various .xml that we have modified according to the template instructions (it also contains a java script folder we haven't touched).
What is it wrong with our modified template - it works locally without problem…!
Thanks for your help

When a Flash file works locally but not on-line, it's almost always a pathing issue (provided you did upload ALL files and do not have something missing... as suggested by Ned).
A "pathing issue" results when the main .swf cannot find one or more of the associated Flash files...like an xml file or images.
It can be something as simple as using switching file names to all lower case. Local machine is not case sensative... most servers are. So "My Photo.JPG" is not the same as "my_photo.jpg". When naming files, best to use all lower case, no spaces in any file or folder names... use_underscore_instead.
But the most common cause is that those associated files (xml, images, etc.) are not pathed relative to the Web page where the main .swf is embedded. Pathing to the .xml and image files should be as though the .swf was located in the same folder as the Web page... NOT the actual location of the .swf file.
And that includes paths to the xml file and paths to image files coded into those xml files. Everything need to be coded relative to the Web page.
This topic has been covered a number of times here:
http://forums.adobe.com/message/4368273#4368273
http://forums.adobe.com/message/4294529#4294529
http://forums.adobe.com/message/4280086#4280086
http://forums.adobe.com/message/4267408#4267408
Best wishes,
Adninjastrator

How can I make the web server work on port 80 and not 443. I can only access my website using https.

On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
How can I change that? Does anyone know?
Thanks for any reply

in the server: I checked the SSL certificate. Tried several configuration.
Well, that's a problem for a start.
Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL

How do I get Apache web server working ...

How do I get Apache web server working on my MacBook Pro, which is running Leopard 10.5.8?
When I enter 'http://localhost/~username/' (without the quote marks) as a URL in my Firefox browser on the MacBook, I do not see any result at all(!). I do have Web Sharing on in System Preferences on that machine. But the browser does nothing whatever for that URL ...
On my other computer, an iMac running Leopard 10.5.8, when I enter 'http://localhost/~username/' I see the default "Your Website Here" page. That same default page is in fact the index.html file I expect to see on the MacBook Pro. But it isn't getting invoked for some reason. Nothing is happening ...
When on the iMac I try 'http://10.0.1.18/~username/' (10.0.1.18 is the local IP address I see under 'Web Sharing: On' on the MacBook) I get "Unable to connect: Firefox can't establish a connection to the server at 10.0.1.18."
When on the MacBook I try 'http://10.0.1.5/~username/' (10.0.1.5 is the local IP address I see under 'Web Sharing: On' on the MacBook) I see the default "Your Website Here" page.
It is the same on my iPhone: Using the same local IP addresses and usernames, Safari can see the index.html page on my iMac but not on my MacBook.
It looks as if Apache is not working on the MacBook, while on the iMac it works fine.
On the MacBook I can see (after I use 'defaults write com.apple.finder AppleShowAllFiles TRUE' in Terminal) a /private/etc/apache2/ directory with what look to be(?) the usual contents. So it looks like Apache is duly installed, as far as I can tell.
On the MacBook I don't see a file at /private/var/log/apache2/error_log, which is the location for 'ErrorLog' given in the httpd.conf file.
That about exhausts my understanding of how to get a handle on my problem.
Any advice or suggestions from those who have more expertise with Apache will be much appreciated ...

Okai, so we are getting somewhere, but not quit there yet :-)
I opened the Kenneth.conf file using the command: vi Kenneth.conf
This is what it said:
<Directory "/Users/Kenneth/Sites/">
Options Indexes Multiviews
AllowOverride AuthConfig Limit
Order allow,deny
Allow from all
</Directory>
"Kenneth.conf" [readonly] 6L, 139C
I therefore changed the AllowOverride from AuthConfig Limit to None, which was the only difference from what you posted above. Something did change, when I tried to open XAMPP it prompted me a password, but Apache still wont start :-/

Apache Web Server Listener (PLSQL) is not running!!!

adapcctl erroring out with message "Apache Web Server Listener (PLSQL) is not running." after a simple apache bounce
EBS 11.5.10.2
[applmgr@naoes04 naprod]$ adapcctl.sh start
adapcctl.sh version 115.55
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
adapcctl.sh: exiting with status 0
[applmgr@naoes04 naprod]$ adapcctl.sh status
adapcctl.sh version 115.55
Apache Web Server Listener :httpd ( pid 19447 ) is running.
Apache Web Server Listener (PLSQL) is not running.
adapcctl.sh: exiting with status 1

1. Check adapcctl.sh log file
2. It was working before? If yes what changed?
3. Did you change apps password?1. No noticeable entry in adapcctl log except this
+05/24/12-06:46:02 :: adapcctl.sh version 115.55+
+05/24/12-06:46:02 :: Apache Web Server Listener :httpd ( pid 30453 ) is running.+
+05/24/12-06:46:02 :: Apache Web Server Listener (PLSQL) is not running.+
+05/24/12-06:46:02 :: adapcctl.sh: exiting with status 1+
+================================================================================+
+05/24/12-06:46:17 :: adapcctl.sh version 115.55+
+05/24/12-06:46:17 :: Apache Web Server Listener :httpd ( pid 30453 ) is running.+
+05/24/12-06:46:17 :: Apache Web Server Listener (PLSQL) is not running.+
+05/24/12-06:46:17 :: adapcctl.sh: exiting with status 1+
+===============================================================================+
2. It was working before, nothing was changed
3. Nope, I did not change the apps password
I have already tried those steps
Apache Web Server Listener (PLSQL) is not running.
adapcctl.sh: exiting with status 1
Edited by: 928983 on 24-May-2012 05:23

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

See:
* http://kb.mozillazine.org/Browser_will_not_start_up

HT1386 my Ipod will not connect to my computer it worked yesterday but not today and it is only a new ipod touch, it will not even be recognised on my itunes but yet it can charge off my computer. need help!

it worked yesterday but not today and it is only a new ipod touch, it will not even be recognised on my itunes but yet it can charge off my computer. need help!

iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows

Occasionally Firefox 3.6.12 won't display photos on certain sites. Reloading works sometime but not alwasys.

At times on auction some sites such as ebay, (and others), photos won't display. If I press the reload button there's a chance the photo will display. If reload doesn't work the first time, pressing it 3 or 4 times may work but not always. Closing the site then re-opening works sometimes but not always. Annoying.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac

Constant Error; Adobe Flash Player 11.4 r402 has stopped working. But NOT running Trusteer Rapport.

I am experiancing this unbelieveably annoying and constant Flash error; Adobe Flash Player 11.4 r402 has stopped working.
But NOT running Trusteer Rapport, I never have, and it's not even installed on my computer. So what's causing this?

There were a couple AntiVirus/AntiMalware products that keep coming up, but I haven't validated that in the lab and don't want to call anyone out publicly without reporting the issue to them first.  If you could tell me what antivirus/antimalware products and versions you have installed, that would be helpful.
So, third party stuff aside, I'd like to know more about the crashes your seeing:
1.) Please provide links to the Firefox crash reports. If you have multiples, the first few would be great.
     In Firefox, type about:crashes in the address bar
     If the link starts with "bp...", it's already been submitted -- just right-click on it and copy the link, and paste it into the reply here.
     If not, click it to submit it, and copy the subsequent link.
2.) In firefox, type about:support
     Just copy and paste the output into the reply.
3.) In Firefox, type about:plugins
     Please copy and paste the output into the reply
4.) Please provide the output of the DirectX Diagnostic Utility
     Click Start > type "dxdiag" [enter]
     Click Save All Information
     Copy the output of the file into the reply, or use Adobe SendNow/DropBox/PasteBin to share the file.
5.) If you can provide an exact URL and step-by-step instructions on repeating the crash (if it's consistent), that would be really helpful. My goal is to build out a configuration that matches yours as closely as possible, reproduce the problem and then debug it.
If you're not comfortable sharing that diagnostic information publicly, send me a private message. Just click my name and use the options on the right.
Thanks!

Link to tabbed panel works once, but not again

I have successfully linked from text in one tabbed panel to open another panel on the same page, using SpryURLUtils.js.
<a href="?tab=2#TabbedPanels1">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab: params.tab ? params.tab : 0});
When I return to the panel containing the link, the link no longer functions. So basically, it will work once, but not twice.
Thoughts on what's happening?

The example that you gave is great for opening a tab in a new page.To open panels on the same page see here http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm
Gramps

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Web server works externally, but not internally

Similar Messages

Maybe you are looking for