Link to tabbed panel works once, but not again

I have successfully linked from text in one tabbed panel to open another panel on the same page, using SpryURLUtils.js.
<a href="?tab=2#TabbedPanels1">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab: params.tab ? params.tab : 0});
When I return to the panel containing the link, the link no longer functions. So basically, it will work once, but not twice.
Thoughts on what's happening?

The example that you gave is great for opening a tab in a new page.To open panels on the same page see here http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm
Gramps

Similar Messages

SF300-24 DHCP Server not responding (worked once but not again)

Tried to get the new firmware DHCP Server option working but after turning it off and back on it doesn't seem to give any addresses anymore.
Anyone else having troubles or success actually using the SF300 v1.4 DHCP Server?
I even tried factory default reset but no luck.
When I did have it working everything was good but the older Cisco Meraki would not get an IP address so I had to revert to an older DHCP server. When I tried again today by turning the older server off and the SF300 back on, none of the Windows machines that previously would work would get an address.
Am running:
System Summary
System Information
System Operational Mode:
L2 Mode
System Description:
SF300-24 24-Port 10/100 Managed Switch
System Location:
Edit
System Contact:
Edit
Host Name:
switche2653d
Edit
System Object ID:
1.3.6.1.4.1.9.6.1.82.24.1
System Uptime:
0 day(s), 0 hr(s), 37 min(s) and 28 sec(s)
Current Time:
17:33:23;2014-Aug-06
Base MAC Address:
00:25:84:e2:xx:xx
Jumbo Frames:
Disabled
Software Information
Firmware Version (Active Image):
1.4.0.88
Firmware MD5 Checksum (Active Image):
66ab3618cb29023da5ce7c2177e6c3d4
Firmware Version (Non-active):
1.3.7.18
Firmware MD5 Checksum (Non-active):
1f59c2af2f50786e1a8a3146de42c867
Boot Version:
1.3.5.06
Boot MD5 Checksum:
da44c9c583e5a8a274f911c4d16f501e
Locale:
en-US
Language Version:
1.4.0.88
Language MD5 Checksum:
N/A
TCP/UDP Services Status
Edit
HTTP Service:
Enabled
HTTPS Service:
Enabled
SNMP Service:
Disabled
Telnet Service:
Disabled
SSH Service:
Disabled
Serial Number:
DNI15xxxxx
PID VID:
SRW224G4-K9 V01

Tried to get the new firmware DHCP Server option working but after turning it off and back on it doesn't seem to give any addresses anymore.
Anyone else having troubles or success actually using the SF300 v1.4 DHCP Server?
I even tried factory default reset but no luck.
When I did have it working everything was good but the older Cisco Meraki would not get an IP address so I had to revert to an older DHCP server. When I tried again today by turning the older server off and the SF300 back on, none of the Windows machines that previously would work would get an address.
Am running:
System Summary
System Information
System Operational Mode:
L2 Mode
System Description:
SF300-24 24-Port 10/100 Managed Switch
System Location:
Edit
System Contact:
Edit
Host Name:
switche2653d
Edit
System Object ID:
1.3.6.1.4.1.9.6.1.82.24.1
System Uptime:
0 day(s), 0 hr(s), 37 min(s) and 28 sec(s)
Current Time:
17:33:23;2014-Aug-06
Base MAC Address:
00:25:84:e2:xx:xx
Jumbo Frames:
Disabled
Software Information
Firmware Version (Active Image):
1.4.0.88
Firmware MD5 Checksum (Active Image):
66ab3618cb29023da5ce7c2177e6c3d4
Firmware Version (Non-active):
1.3.7.18
Firmware MD5 Checksum (Non-active):
1f59c2af2f50786e1a8a3146de42c867
Boot Version:
1.3.5.06
Boot MD5 Checksum:
da44c9c583e5a8a274f911c4d16f501e
Locale:
en-US
Language Version:
1.4.0.88
Language MD5 Checksum:
N/A
TCP/UDP Services Status
Edit
HTTP Service:
Enabled
HTTPS Service:
Enabled
SNMP Service:
Disabled
Telnet Service:
Disabled
SSH Service:
Disabled
Serial Number:
DNI15xxxxx
PID VID:
SRW224G4-K9 V01

ATV2 woked once, but not again.

I have a new ATV2, HomeSharing worked the first time I turned it on, now it doesn't. I had the same problem last week before I switched to ATT U-Verse, but it's doing the same thing. Worked once, but not again. Any suggestions?

Sounds like there's something up with the local network
Have you had a look at this?
http://support.apple.com/kb/TS2972

ITunes won't recognize iPhone (3G), restored with another pc and worked once but not anymore, help please

- I changed a new case, battery and a headphone jack, after that iTunes didn't really wanna recognize my iPhone
- I've had the same problem earlier too, before ^that
- I have the latest version of iTunes
- I've tried to remove all USBs and reconnect iPhone many times, and rebooted both PC and phone
- I had the error 1611 while trying to restore on my PC -> I tried on another computer, worked
- my PC's iTunes recognized my iPhone once after restoring but not anymore
This is really annoying, I would be so thankful if you can help me.

+ I have reinstalled my iTunes.

Linked server problem, its works locally but not from remote machine

Hi,
i am using the application NAV and have written the query in the application. am using automation variable to link to the SQL Server.
The problem is that , the query which i have written executes only when i am working on local machine .
I mean when i want to execute the same query from remote machine through my app Dynamics NAV then its not getting executed.
Thanks in advance

Depends on what you are trying to do and what security you are using.
What error did you get?
If you are using windows authentication then take a look at delegation
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Quadra 4000 and Lion worked once but not anymore

HI all
I just bought a new MacPro that came with Lion on it. I added a Nvidia Quadra 4000 to and it all worked just fine. Cuda picked it up and it worked fine with Adobe Premire 5 and Davinci Resolve.
I simply restarted my computer and now it's not regognising the card any more.
Does anyone have any suggestions please, it worked just fine and now after a restart it's not working at all.

+ I have reinstalled my iTunes.

HT1386 I cant download a playlist from my itunes (PC) to my iPad it worked once but not anymore ?

I cant sync my playlist from itunes (pc) to my ipad ? It syncs drop box but nothing else

Hello JLHINC,
Thank you for using Apple Support Communities!
I have a few things to recommend here. First if you havent already, restart the iPhone and computer and try again.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Next, if needed I would backup your device to iTunes and restore it.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling

IDVD Burns Once, But Not Again

I think I might be adding to the whole "iDVD not burning in the last minutes after hours of waiting" theme. The trouble the last couple of days I have been having is I get the first disk to burn and everything looks good. When it asks if i want to burn a second one, I say yes and put in another DVD (Sony). Then it starts to burn and just before the end (a minute or so away) and the whole thing freezes. It ejects the disc unburned. So I am totally stumped. It has done this twice now. I will look for a cleaner, but is there another issue? Thanks everyone. - Carlyle

Can you save your iDVD project as a disk image file?
From within your iDVD project, go to File->Save as Disk Image
This process looks like the burning and will take just as long for the encoding, but the end result is a disk image file, not a burned DVD disk. There are several advantages to saving your iDVD projects as disk image files.
It is more efficient and less stress on iDVD to burn your DVD disks from a disk image file.
You can save a disk image file and safely delete your iDVD project and all the media used in it since it is all encoded into the disk image file. This can save you drive space because usually a disk image file takes up less space than the project.
A disk image file can be transferred to an external drive or another computer.
It is a great backup for your project.
Many people have saved only the iDVD project and deleted the iMovie used in it and have been bitterly disappointed to discover that the iDVD project is useless without its media files available. An iDVD project should be thought of as a container with references to its media that iDVD pulls into the project just for the burn, but does not keep them there. The movies, photos and audio files remain where they are. If you move, change, rename or delete these, iDVD will not be able to locate them.
To create a disk image file:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6733.html
If the file is successfully created, you can test that it is ok by clicking on the file to mount it (you don't have to do anything with the files you see) then opening DVD Player (in Applications). The project should begin playing. If the project plays correctly, then you can burn your DVD disks from it using Disk Utility (Applications/Utilities) following this:
http://support.apple.com/kb/HT2087?viewlocale=en_US
If you are not able to create a disk image file that works, but you do already have a burned DVD-R disk that works, you can use it to create a disk image file and then use that file to burn more DVDs. See this for help with doing that:
http://support.apple.com/kb/HT2059?viewlocale=en_US
Other suggestions.....
Be sure you have enough free space for the burn. At least 20GB is recommended, but more is better
Use a recommended brand of DVD disk. Verbatim, Maxell and Taiyo Yuden are the most recommended here. I use Verbatim DVD-R and have never had a burn issue with them. I have occasionally use Sonys and they seem ok, too.
Burn the DVD disks at a slow speed to get a more consistent burn...usually 4x or less.
Post back if you have more questions.

Installer works once, but never again

I created an installer using PackageMaker. This package installs my app bundle and a local copy of postgres 9.1.
I also created an uninstaller that runs the Postgresql un-installer script, removes my app bundle and uses pkgutil to "forget" the receipt.
The installation on the end user machine works if the app has never been installed.
Running the un-installer appears to remove all the necessary parts, include the .bom and .plist from the receipts db tree.
Running the installer again ends with an error:
PackageKit: Install Failed: PKG: pre-install scripts for "com.mycompany.myapplication.pkg"\nError Domain=PKInstallErrorDomain Code=112
Digging through the logs I uncovered one error: psql command not found. This was in the log for the script that add roles to dbms. Interestingly, the postgres installer succeeded. pgAdmin fires up and the basic postgres schema, etc., are present.
So why can't the installer script find psql on this second invocation?

Hello Jnielsen,
If you have tried the 5 R's and the iPod is still not mounting in iTunes, there are several possibilities. Additional troubleshooting for most potential causes are described in this article:
http://support.apple.com/kb/TS1369?viewlocale=en_US
Before taking it back to the reseller, if you have the option to do so, test it on another computer.
Charles

Itunes 10.5: It starts once, but not twice....

Hi there everybody,
I have a question, I have myself a new gaming pc, everything works, software, hardware, no problem at all.Itunes also worked perfectly, I use itunes, because I have an i Phone and, well, I just need Itunes to sync everything.
Now a few days back, my Itunes started acting up, all of a sudden it kept asking me for my password because it needed authorization for automatic downloads. Also, Itunes would boot only 1 time, not more, whenever I closed it up and needed it to boot up again, it wouldn't. After a reinstallation, I kept having these problems, so I deleted Itunes again, and deleted every Apple related directory from my pc, even within the hidden directories. I knew that this would maybe help, cause alot of programs these days don't delete everything, even if you tell them to;) It sort off helped, I don't have the problem with the password asking anymore, but still Itunes only boots once a "pc startup".
The Symptoms:
Itunes boots once, but not for a second time.
Itunes.exe and ItunesHelper.exe do show in the processes tab of the task manager.
Whenever I close these processes and I try to start Itunes, Itunes freezes on my screen as a square gray space.
Can someone please help me, cause, as sad as it sounds, I am really annoyed by having a brandnew pc, having everything work perfectlly, better than ever, and still have 1 program that doesn't work properly...Itunes.
If you need any more detail, just ask me:)
Thanks everyone!

Seems like I found myself a solution with the help of some random thread I found (thank god), seems that APSdeamon, also known as ApplePush, seems to cause the prblem here. Terminate the process in the process tab, and everything works out fine again. Maybe a bit drastic, but you could also delete the .exe file and never have the problem again.

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help

make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac

Constant Error; Adobe Flash Player 11.4 r402 has stopped working. But NOT running Trusteer Rapport.

I am experiancing this unbelieveably annoying and constant Flash error; Adobe Flash Player 11.4 r402 has stopped working.
But NOT running Trusteer Rapport, I never have, and it's not even installed on my computer. So what's causing this?

There were a couple AntiVirus/AntiMalware products that keep coming up, but I haven't validated that in the lab and don't want to call anyone out publicly without reporting the issue to them first.  If you could tell me what antivirus/antimalware products and versions you have installed, that would be helpful.
So, third party stuff aside, I'd like to know more about the crashes your seeing:
1.) Please provide links to the Firefox crash reports. If you have multiples, the first few would be great.
     In Firefox, type about:crashes in the address bar
     If the link starts with "bp...", it's already been submitted -- just right-click on it and copy the link, and paste it into the reply here.
     If not, click it to submit it, and copy the subsequent link.
2.) In firefox, type about:support
     Just copy and paste the output into the reply.
3.) In Firefox, type about:plugins
     Please copy and paste the output into the reply
4.) Please provide the output of the DirectX Diagnostic Utility
     Click Start > type "dxdiag" [enter]
     Click Save All Information
     Copy the output of the file into the reply, or use Adobe SendNow/DropBox/PasteBin to share the file.
5.) If you can provide an exact URL and step-by-step instructions on repeating the crash (if it's consistent), that would be really helpful. My goal is to build out a configuration that matches yours as closely as possible, reproduce the problem and then debug it.
If you're not comfortable sharing that diagnostic information publicly, send me a private message. Just click my name and use the options on the right.
Thanks!

I BOUGHT an application from my iphone Application icon and paid 2.99 dollars too, for phone tracker , downloaded sucessfully and its working too but not tracking the phones as mentioned in the description can any one support me??? better from apple

I BOUGHT an application from my iphone Application icon and paid 2.99 dollars too, for phone tracker , downloaded sucessfully and its working too but not tracking the phones as mentioned in the description can any one support me??? better from apple!!

Is this the app you're referring to?
http://itunes.apple.com/us/app/phone-tracker/id348537489?mt=8
As you'll note it's made by Presselite and that page has a link to their support.
Also, you'll find it best not to post questions about iPhone apps in the AppleWorks forum. Best to contact the makers of the app.
Regards
TD

[AS3] EventDispatcher works locally but not remotely

Hi,
I am very new to Action Script and have the following
problem. I hope someone can point me in the right direction.
I have a small video player app. I have added the FLVPlayback
component to the stage and set some properties via action script
(AS 3)
I then instantiate a class to go and retrieve some XML,
register an eventListener to wait for the XML to be loaded and once
the event has fired, load the FLV file (just hard coded at the
moment) into the FLVPlayback object.
This works when testing in the Flash IDE but not when I
publish the movie to my webserver. I have tried commenting out the
player.load() and just adding a textfield and again this works
locally but not when I publish to the webserver. I have included
some code snippets below.
Can anyone tell me where I am going wrong?
Any pointers much appreciated.
Thanks
Martin

Hi,
I found the problem if anyone has the same issue. I was
passing some FlashVars in incorrectly using the
AC_RunActiveContent.js that comes with Flash. I have switched to
swfobject and all is well.
thanks

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

See:
* http://kb.mozillazine.org/Browser_will_not_start_up

Link to tabbed panel works once, but not again

Similar Messages

Maybe you are looking for