Web Service Help (Login Problem?)

Hi,
     I'm trying to access the queryview webservice.  I have access to the WSDL, but when I perform the SOAP call I get an "Authority check failed" error.
Any ideas where this error is coming from gurus or how to get past it.?  I'm using infopath to perform the soap call.
Any help is greatly appreciated!
The SOAP response indicates that an error occurred:
Authority check failed

i assume that you have desinged the form and saved it. when you open the saved form and run it you get this error.
to avoid this you have to pass userid and password. for this you may have to add two fields in the form and add a custom code to the form tohandle the user id and password .
check out the link in my weblog on this subject.
/people/durairaj.athavanraja/blog/2004/09/07/microsoft-office-2003-infopath-sap-rfcwebservice
Regards
Raja
close your previous threads
Re: Web Service Login

Similar Messages

  • Autentication error in Web Service after Login Module

    Hi Experts,
    I am getting a failed autentication when i try to access a web service. This is my scenario:
    I have developed my own login module using JAAS. When i call a web service, the login module is executed, then it validate the credencials and make the authetication true. After that the web service is called. The web Service is mark as user/password authetication. But i always get this error:
    Authentication for web service UtilityService, configuration UtilityService using security policy BASIC___ws failed: Login failed.. (See SAP Note 880896 for further info).
    Just for you know, the credentials taht i use in login modulo isn't the user of UME. I use user store in another user store. I fthe credential is correct pass to the Principal an user of UME. To login stack is right when pass to login module:
    LOGIN.OK
    User: tecbmmab
    IP Address: 192.168.14.48
    Authentication Stack: tridmen.com.br/pegasus~ear*pegasus
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          false      false                
    2. br.com.tridmen.login.ERPCEHeaderLoginModule                             REQUISITE   ok          true       true                 
            #1 Client = 800
            #2 Destination_reference = CUSTOM_DEST
            #3 SysId = DE1
            #4 SysNum = 00
            #5 TargetHost = tecs220
            #6 TrATicket = TRATICKETCTRL
    Central Checks                                                                                true
    After this, the error mention above, of web service happen.
    As my knowledge, when i call the web service i already have the session autenticate with login module. But this is not happen.
    Could someone help with this question?
    Best regards
    Marcos Brandã

    Hi,
    in what order did you specify your login modules? In that error message it looks like it's in wrong order. Your custom module should be first with SUFFICIENT and then standard user name/password with REQUISITE.
    Cheers

  • Web service empty relationship problem

    hi all,
    I have a pretty simple web service. Two entities, a citizen and a business. A citizen is able to register 0..n businesses. There is a WS which reads the citizen. When the business key list in citizen is empty the web service wont return the citizen (portal request failed could not execute web service operation). When at least one relation is defined all works fine.
    I've tested the web service. The problem occurs only with VC.
    thanks for your help,
    regards, felix

    Hi Ankur,
    no, not exactly...
    The webservice is tested with an id as input and returns some string values (name, firstname...) and a list of references to other objects. When this list is empty...(depending on the back end system)
    part of the SOAP message:
    <ns1:businessRef xmlns:ns1='urn:com.sap.bureg001.core.besrv.citizen' xmlns:pns='urn:java/lang'></ns1:businessRef>
    ... visual composer returns an error.
    when this list is not empty (again depending on database entries in the back end)
    part of the SOAP message:
    <ns1:businessRef xmlns:ns1='urn:com.sap.bureg001.core.besrv.citizen' xmlns:pns='urn:java/lang'><pns:String>c22bc900-dec3-11db-cdce-00505625e523</pns:String>
    </ns1:businessRef>
    ... visual composer does not return an error but returns the values like the service is supposed to do.
    Testing the web service with Web Services Navigator both scenarios are working without problems.
    thanks for your fast response,
    felix

  • Web service help please - client invoking problem

    hi there
    can anyone help me on this? i create a client that is going to call a web service. now, i have erro exception saying that javax.xml.rpc.ServiceFactoryImpl can not be found. it happens when the execution reaches
    //code..................................
    ServiceFactory factory = ServiceFactory.newInstance();
    the following is my code to invoke a web service:
    //code................................................
    private void sendOrder(String orderid, String message)
    throws ClassNotFoundException, SQLException{
    // Setup the global JAX-RPC service factory
    try{
    System.setProperty( "javax.xml.rpc.ServiceFactory",
    "com.sun.xml.rpc.client.ServiceFactoryImpl");
    // create service factory
    ServiceFactory factory = ServiceFactory.newInstance();
    // define qnames
    String targetNamespace = "http://www.wowgao.com/exchange/server"
    + "wsdl/";
    QName serviceName = new QName(targetNamespace,
    "WGOrder.WGOrderBean");
    QName portName = new QName(targetNamespace,
    "WGOrderPort");
    QName operationName = new QName("urn:WGOrder", "orderSubmit");
    // create service
    Service service = factory.createService(serviceName);
    // create call
    Call call = service.createCall();
    // set port and operation name
    call.setPortTypeName(portName);
    call.setOperationName(operationName);
    // add parameters
    call.addParameter("BuyerID",
    new QName("http://www.w3.org/2001/XMLSchema", "string"),
    ParameterMode.IN);
    call.addParameter("SellerID",
    new QName("http://www.w3.org/2001/XMLSchema", "string"),
    ParameterMode.IN);
    call.addParameter("order",
    new QName("http://www.w3.org/2001/XMLSchema", "string"),
    ParameterMode.IN);
    call.setReturnType(new QName( "http://www.w3.org/2001/XMLSchema","long") );
    // set end point address
    call.setTargetEndpointAddress("http://www.xmethods.com:9090/soap");
    // invoke the remote web service
    String result = (String)call.invoke(operationName, new Object[]{"123","234",message});
    how do i set the com.sun.xml.rpc.client.ServiceFactor so that it know where to find the class?

    It sounds like a classpath problem. Try adding JWSDP_HOME/common/lib/jaxrpc-ri.jar to the client's classpath.
    Mike W.

  • WEB Service Session - Login

    Hello Experts,
    I have to consume a BOBJ Web Service Session in SAP Netweawer.
    Hello,
    We have SAP NetWeaver 2004s and BusinessObjects Enterprise 12.0.
    I've created an proxy object on the SAP Netweaver side in the following way :
    se80->Create->Enterprice Service->Service-Consumer->URL/HTTP Destination-> URL = http://<host>:8080/dswsbobje/services/Session?wsdl
    Then I've created an Port using soamanager.
    I't seems to be working, becouse methods like : getServerInfo, getServerInfoDetails are working ok.
    Now I have a problem with the method Login. As parameter for this method I see only structure CREDENTIAL, which have only one field CONTROLLER (PRXCTRLTAB).
    I've expected to have in the Parameters for this method a structure EnterpriceCredential with fields like username, password and so on - but its not.
    Could You help me ?
    Greetings
    Wojciech
    Here my coding :
    REPORT  ztest.
    DATA text TYPE string.
    DATA : lr_proxy TYPE REF TO zsco_session_port.  " its my session proxy object
    DATA : oref   TYPE REF TO cx_root.
    TRY.
        CREATE OBJECT lr_proxy
          EXPORTING
            logical_port_name = 'LP1'.
      CATCH cx_ai_system_fault INTO oref.
        text = oref->get_text( ).
    ENDTRY.
    DATA get_server_info_in TYPE zsget_server_info_soap_in.
    DATA get_server_info_out TYPE zsget_server_info_soap_out.
    THIS IS WORKING WELL
    TRY.
        CALL METHOD lr_proxy->get_server_info
          EXPORTING
            input  = get_server_info_in
          IMPORTING
            output = get_server_info_out.
      CATCH cx_ai_system_fault  INTO oref..
      CATCH zscx_dswsexception  INTO oref..
      CATCH cx_ai_application_fault  INTO oref..
    ENDTRY.
    break-point.
    AND THIS IS ENDINNG WITH EXCEPTION
    TRY.
        CALL METHOD lr_proxy->login
          EXPORTING
            input  = login_in
          IMPORTING
            output = login_out.
      CATCH cx_ai_system_fault INTO oref.
        text = oref->get_text( ).
    _ CATCH zscx_dswsexception INTO oref.   this exeption is being called_
        text = oref->get_text( ).
      CATCH cx_ai_application_fault INTO oref.
        text = oref->get_text( ).
    ENDTRY.

    Hello,
    I struggle with exactly the same problem accessing the login webservice of the BOE server. Unfortunately the previous answer did not help me since I don't understand it
    Anyone able to enlighten me?
    Edit: Nevermind, I just found out by myself.
    Thanks,
    Sebastian
    Edited by: Sebastian Solzbacher on Nov 25, 2011 9:43 AM

  • BOBJ WEB Service Session - Login

    Hello Experts,
    I have to consume a BOBJ Web Service Session in SAP Netweawer.
    Hello,
    We have SAP NetWeaver 2004s and BusinessObjects Enterprise 12.0.
    I've created an proxy object on the SAP Netweaver side in the following way :
    se80->Create->Enterprice Service->Service-Consumer->URL/HTTP Destination-> URL = http://<host>:8080/dswsbobje/services/Session?wsdl
    Then I've created an Port using soamanager.
    I't seems to be working, becouse methods like : getServerInfo, getServerInfoDetails are working ok.
    Now I have a problem with the method Login. As parameter for this method I see only structure CREDENTIAL, which have only one field CONTROLLER (PRXCTRLTAB).
    I've expected to have in the Parameters for this method a structure EnterpriceCredential with fields like username, password and so on - but its not.
    Could You help me ?
    Greetings
    Wojciech
    Here my coding :
    REPORT ztest.
    DATA text TYPE string.
    DATA : lr_proxy TYPE REF TO zsco_session_port. " its my session proxy object
    DATA : oref TYPE REF TO cx_root.
    TRY.
    CREATE OBJECT lr_proxy
    EXPORTING
    logical_port_name = 'LP1'.
    CATCH cx_ai_system_fault INTO oref.
    text = oref->get_text( ).
    ENDTRY.
    DATA get_server_info_in TYPE zsget_server_info_soap_in.
    DATA get_server_info_out TYPE zsget_server_info_soap_out.
    THIS IS WORKING WELL
    TRY.
    CALL METHOD lr_proxy->get_server_info
    EXPORTING
    input = get_server_info_in
    IMPORTING
    output = get_server_info_out.
    CATCH cx_ai_system_fault INTO oref..
    CATCH zscx_dswsexception INTO oref..
    CATCH cx_ai_application_fault INTO oref..
    ENDTRY.
    break-point.
    AND THIS IS ENDINNG WITH EXCEPTION
    TRY.
    CALL METHOD lr_proxy->login
    EXPORTING
    input = login_in
    IMPORTING
    output = login_out.
    CATCH cx_ai_system_fault INTO oref.
    text = oref->get_text( ).
    _ CATCH zscx_dswsexception INTO oref. this exeption is being called_
    text = oref->get_text( ).
    CATCH cx_ai_application_fault INTO oref.
    text = oref->get_text( ).
    ENDTRY.

    Hello,
    I struggle with exactly the same problem accessing the login webservice of the BOE server. Unfortunately the previous answer did not help me since I don't understand it
    Anyone able to enlighten me?
    Edit: Nevermind, I just found out by myself.
    Thanks,
    Sebastian
    Edited by: Sebastian Solzbacher on Nov 25, 2011 9:43 AM

  • Web service url redirecting problem

    I am working on a form developed by LC Designer that will call a web service from our web server.
    In the WSDL, the soap address location points to www.domain.com/webservice1,
    however our web server will perform load balance by directing all www.domain.com to a new url
    either www1.domain.com or www2.domain.com.
    The result is that nothing is returned after executing the webservice call, I can't catch any error
    after xfa.connectionSet.WebServiceDC.execute(false); just nothing returns after the call.
    I suppose it is the problem that the url has been redirected to a different one.
    However if the soap address location points directly to either www1 or www2, the call returns result alright.
    Is there way or script that I can handle by redirecting a web service to a different URL like that in Adobe Flex?
    That is what I found from the web for Adobe Flex :
    public function onLoginResult(event:ResultEvent):void {
    //Extract the new service endpoint from the login result. 
    var newServiceURL = event.result.serverUrl;
    // Redirect all service operations to the URL received in the login result. 
        serviceName.endpointURI=newServiceURL;
    Best Rgds.

    A helpful poster on the House of Fusion forums pointed me to
    a work-around:
    Apparently ColdFusion just uses the WSDL to create the sub
    objects for the web service call, so as long as there is a service
    port address secified in the WSDL it doesn't matter where the
    actual WSDL file sits. So I just downloaded the WSDL using CFHTTP
    (had to use this article to configure CFHTTP for HTTP Compression:
    http://www.talkingtree.com/blog/index.cfm/2004/7/28/20040729)
    and then I pointed my CF Administrator to the WSDL on my local
    machine. And Presto - I can connect to the web service no problem
    now.
    Only problem is that I have to download the WSDL every time
    there is a change to the webservice, but I can schedule a task that
    downloads the file once a week or so.

  • SOAP Web Service +  Custom Login Module issue

    Hi Guys,
    We faced an authentication issue in our project. Could you please give any advice how the issue could be resolved.
    Environment: A simple SOAP Web Service on top of POJO class created in a Web Application. The web application deployed to the SAP NetWeaver 7.10 Application Server in the Enterprise Application Archive.
    Configuration:
          Single Service Administration Application(NetWeaver Administration -> SOA Management -> Application and Scenario Communication -> Single Service Administration)
           The web service endpoint has authentication configured to use User ID/Password HTTP Authentication.
        Authentication Application(NetWeaver Administration-> Configuration Management->Security->Authentication)
          The application(<vendorName>/<earName>*<vendor>~<webAppName>) has Authentication Stack configured to use our custom login module.
    Issue:  BasicPasswordLoginModule used by the J2EE when we are trying to execute the web service using Web Service Navigator(checked in debug mode). It seems that we missed something in configuration.
    Idea: The main Idea is to use our custom login module when we are executing a web service.
    Could you help me to resolve the issue.
    Thanks,
    Dmitry
    Edited by: Dmitry Eidin on Jul 17, 2009 3:46 PM

    > The web service endpoint has authentication configured to use User ID/Password HTTP Authentication.
    That's the point.

  • Web service model initialization problem

    Hello, every one
    I have some trouble in the initialization of web service model.
    I tested the web service through web service navigator and it was ok.
    My context structure is:
    Request_ZBAPIWCALIST_zbapiWcalist(0..n)
    --parameters(0..1)
    rBdate(0..n)
    high(string)
    low(string)
    option(string)
    sign(string)
    --Response(0..1)
    Result(0..1)
    tWca(0..n)
    estat(string)
    istat(string)
    Following is my codes:
    Request_ZBAPIWCALIST_zbapiWcalist model = new Request_ZBAPIWCALIST_zbapiWcalist();
    ComplexType_ZbapiWcalist parameter = new ComplexType_ZbapiWcalist();
    model.setParameters(parameter);          
    ComplexType_ZbapiRBdate rBdate = new ComplexType_ZbapiRBdate();
    ComplexType_ZbapiRResp rResp = new ComplexType_ZbapiRResp();
    ComplexType_ZbapiRTplnr rTplnr = new ComplexType_ZbapiRTplnr();
    ComplexType_ZbapiRWapinr rWapinr = new ComplexType_ZbapiRWapinr();
    ComplexType_ZbapiRWapius rWapius = new ComplexType_ZbapiRWapius();
    ComplexType_ZbapiWcalistImport wcaImport = new ComplexType_ZbapiWcalistImport();
    rBdate.setLow("2007-7-1");
    rBdate.setHigh("2007-7-2");
    rBdate.setOption("EQ");
    rBdate.setSign("I");          
    rResp.setLow("");
    rResp.setHigh("");
    rResp.setOption("");
    rResp.setSign("");
    rTplnr.setLow("");
    rTplnr.setHigh("");
    rTplnr.setOption("");
    rTplnr.setSign("");
    rWapinr.setLow("");
    rWapinr.setHigh("");
    rWapinr.setOption("");
    rWapinr.setSign("");
    rWapius.setLow("");
    rWapius.setHigh("");
    rWapius.setOption("");
    rWapius.setSign("");
    wcaImport.setAnye("");
    wcaImport.setAnyi("");
    wcaImport.setSpd("");
    wcaImport.setStatu("");
    wcaImport.setWerks("");          
    ZbapiRBdate rBdateBean = rBdate.getOriginalBean();
    ZbapiRResp rRespBean = rResp.getOriginalBean();
    ZbapiRTplnr rTplnrBean = rTplnr.getOriginalBean();
    ZbapiRWapinr rWapinrBean = rWapinr.getOriginalBean();
    ZbapiRWapius rWapiusBean = rWapius.getOriginalBean();
    ZbapiWcalistImport wcaImportBean = wcaImport.getOriginalBean();
    ZbapiRBdate[] rBdateArray = new ZbapiRBdate[1];
    rBdateArray[0] = rBdateBean;
    ZbapiRResp[] rRespArray = new ZbapiRResp[1];
    rRespArray[0] = rRespBean;
    ZbapiRTplnr[] rTplnrArray = new ZbapiRTplnr[1];
    rTplnrArray[0] = rTplnrBean;          
    ZbapiRWapinr[] rWapinrArray = new ZbapiRWapinr[1];
    rWapinrArray[0] = rWapinrBean;          
    ZbapiRWapius[] rWapiusArray = new ZbapiRWapius[1];
    rWapiusArray[0] = rWapiusBean;
    wcalistBean.setRBdate(rBdateArray);
    wcalistBean.setRResp(rRespArray);
    wcalistBean.setRTplnr(rTplnrArray);
    wcalistBean.setRWapinr(rWapinrArray);
    wcalistBean.setRWapius(rWapiusArray);
    wcalistBean.setWaImport(wcaImportBean);
    wdContext.nodeRequest_ZBAPIWCALIST_zbapiWcalist().bind(model);
    The exception is:
    LocalizedMessage: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. Property [Low] of class [com.pjs.wcalist.model.wsmodel.proxies.types.p1.ZbapiRWapius] must exist and can not be null. This is required by schema description.
    In the test of the web service the Low of the ZbapiRWapius is not needed.
    And after setting the value, the exception told me that I must set the tWca, ie the subnode of the result.
    The problem is: I do not know why the setter method of the original bean of the "parameters" only accept the parameter of array type .
    I think the parameter I set may be wrong.
    When I deal with another web service model(the level of the structure is not deep), it is ok.
    Could someone give me some suggestion or explanation?
    Thanks a lot.
    Referring to the link:
    Re: HELP for WebDynpro web service model with complex structure

    Hi,
    I ahbe set the proxy in webcontainer in configtool,Is there any other thing i need to do?But please tell me what does the error means,<b>GenericServiceFactory error</b>?
    waiting for your reply,
    Regards,
    Ameya

  • Web Service Help

    Hi,
    I am new to Web Service. I am trying to create my first web service in jdev enviorment. I have created a methos whicjh return a string value. I have generated the wsdl, web.xml from jdev. Also generated the client from jdev. Deployed the ws in my local env and when i try to invoke the ws i get the error :
    [SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type &quot;text/html&quot;, must be: &quot;text/xml&quot;. Response was:
    &lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0 Transitional//EN&quot;&gt;
    &lt;HTML&gt;&lt;HEAD&gt;&lt;TITLE&gt;Error Message&lt;/TITLE&gt;
    &lt;META http-equiv=Content-Type content=&quot;text/html; charset=UTF-8&quot;&gt;
    &lt;STYLE id=L_default_1&gt;A {
         FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: #005a80; FONT-FAMILY: tahoma
    A:hover {
         FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: #0d3372; FONT-FAMILY: tahoma
    TD {
         FONT-SIZE: 8pt; FONT-FAMILY: tahoma
    TD.titleBorder {
         BORDER-RIGHT: #955319 1px solid; BORDER-TOP: #955319 1px solid; PADDING-LEFT: 8px; FONT-WEIGHT: bold; FONT-SIZE: 12pt; VERTICAL-ALIGN: middle; BORDER-LEFT: #955319 0px solid; COLOR: #955319; BORDER-BOTTOM: #955319 1px solid; FONT-FAMILY: tahoma; HEIGHT: 35px; BACKGROUND-COLOR: #d2b87a; TEXT-ALIGN: left
    TD.titleBorder_x {
         BORDER-RIGHT: #955319 0px solid; BORDER-TOP: #955319 1px solid; PADDING-LEFT: 8px; FONT-WEIGHT: bold; FONT-SIZE: 12pt; VERTICAL-ALIGN: middle; BORDER-LEFT: #955319 1px solid; COLOR: #978c79; BORDER-BOTTOM: #955319 1px solid; FONT-FAMILY: tahoma; HEIGHT: 35px; BACKGROUND-COLOR: #d2b87a; TEXT-ALIGN: left
    .TitleDescription {
         FONT-WEIGHT: bold; FONT-SIZE: 12pt; COLOR: black; FONT-FAMILY: tahoma
    SPAN.explain {
         FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #934225
    SPAN.TryThings {
         FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #934225
    .TryList {
         MARGIN-TOP: 5px; FONT-WEIGHT: normal; FONT-SIZE: 8pt; COLOR: black; FONT-FAMILY: tahoma
    .X {
         BORDER-RIGHT: #955319 1px solid; BORDER-TOP: #955319 1px solid; FONT-WEIGHT: normal; FONT-SIZE: 12pt; BORDER-LEFT: #955319 1px solid; COLOR: #7b3807; BORDER-BOTTOM: #955319 1px solid; FONT-FAMILY: verdana; BACKGROUND-COLOR: #d1c2b4
    .adminList {
         MARGIN-TOP: 2px
    &lt;/STYLE&gt;
    &lt;META content=&quot;MSHTML 6.00.2800.1170&quot; name=GENERATOR&gt;&lt;/HEAD&gt;
    &lt;BODY bgColor=#f3f3ed&gt;
    &lt;TABLE cellSpacing=0 cellPadding=0 width=&quot;100%&quot;&gt;
    &lt;TBODY&gt;
    &lt;TR&gt;
    &lt;TD class=titleborder_x width=30&gt;
    &lt;TABLE height=25 cellSpacing=2 cellPadding=0 width=25 bgColor=black&gt;
    &lt;TBODY&gt;
    &lt;TR&gt;
    &lt;TD class=x vAlign=center align=middle&gt;X&lt;/TD&gt;
    &lt;/TR&gt;
    &lt;/TBODY&gt;
    &lt;/TABLE&gt;
    &lt;/TD&gt;
    &lt;TD class=titleBorder id=L_default_2&gt;Network Access Message:&lt;SPAN class=TitleDescription&gt; The page cannot be displayed&lt;/SPAN&gt; &lt;/TD&gt;
    &lt;/TR&gt;
    &lt;/TBODY&gt;
    &lt;/TABLE&gt;
    &lt;TABLE id=spacer&gt;
    &lt;TBODY&gt;
    &lt;TR&gt;
    &lt;TD height=10&gt;&lt;/TD&gt;&lt;/TR&gt;&lt;/TBODY&gt;&lt;/TABLE&gt;
    &lt;TABLE width=400&gt;
    &lt;TBODY&gt;
    &lt;TR&gt;
    &lt;TD noWrap width=25&gt;&lt;/TD&gt;
    &lt;TD width=400&gt;&lt;SPAN class=explain&gt;&lt;ID id=L_default_3&gt;&lt;B&gt;Explanation:&lt;/B&gt;&lt;/ID&gt;&lt;/SPAN&gt;&lt;ID id=L_default_4&gt; There is a problem with the page you are trying to reach and it cannot be displayed. &lt;/ID&gt;&lt;BR&gt;&lt;BR&gt;
    &lt;B&gt;&lt;SPAN class=tryThings&gt;&lt;ID id=L_default_5&gt;&lt;B&gt;Try the following:&lt;/B&gt;&lt;/ID&gt;&lt;/SPAN&gt;&lt;/B&gt;
    &lt;UL class=TryList&gt;
    &lt;LI id=L_default_6&gt;&lt;B&gt;Refresh page:&lt;/B&gt; Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
    &lt;LI id=L_default_7&gt;&lt;B&gt;Check spelling:&lt;/B&gt; Check that you typed the Web page address correctly. The address may have been mistyped.
    &lt;LI id=L_default_8&gt;&lt;B&gt;Access from a link:&lt;/B&gt; If there is a link to the page you are looking for, try accessing the page from that link.
    &lt;/UL&gt;
    &lt;ID id=L_default_9&gt;If you are still not able to view the requested page, try contacting your administrator or Helpdesk.&lt;/ID&gt; &lt;BR&gt;&lt;BR&gt;
    &lt;/TD&gt;
    &lt;/TR&gt;
    &lt;/TBODY&gt;
    &lt;/TABLE&gt;
    &lt;TABLE id=spacer&gt;&lt;TBODY&gt;&lt;TR&gt;&lt;TD height=15&gt;&lt;/TD&gt;&lt;/TR&gt;&lt;/TBODY&gt;&lt;/TABLE&gt;
    &lt;TABLE width=400&gt;
    &lt;TBODY&gt;
    &lt;TR&gt;
    &lt;TD noWrap width=25&gt;&lt;/TD&gt;
    &lt;TD width=400 id=L_default_10&gt;&lt;B&gt;Technical Information (for support personnel)&lt;/B&gt;
    &lt;UL class=adminList&gt;
    &lt;LI id=L_default_11&gt;Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. (12209)
    &lt;LI id=L_default_12&gt;IP Address: 170.3.63.13
    &lt;LI id=L_default_13&gt;Date: 4/28/2008 2:50:45 PM [GMT]
    &lt;LI id=L_default_14&gt;Server: wpmoif05.nysdot.private
    &lt;LI id=L_default_15&gt;Source: proxy
    &lt;/UL&gt;
    &lt;/TD&gt;
    &lt;/TR&gt;
    &lt;/TBODY&gt;
    &lt;/TABLE&gt;
    &lt;/BODY&gt;
    &lt;/HTML&gt;
    ]

    Can anybody help on this ???

  • BAPI Web Service Context Mapping Problem

    Hello all,
                 I am developing a process consisting of an automated activity.
    This automated activity uses a logical destination for a web service call to an ECC BAPI.
    The BAPI name is 'BAPI_INQUIRY_CREATEFROMDATA2'
    Now the problem is the Output mapping in the automated activity which calls the web service for the above BAPI has the response name as 'BAPI_INQUIRY_CREATEFROMDATA2.Response'
    So when i try to map the nodes it gives me an error, 'Error at Line 2, Column 29, Found '.' after BAPI_INQUIRY_CREATEFROMDATA2'.
    Since there is no mapping i do not get the process working
    If i remove the '.' from the wsdl file source, mapping is done. But the backend service call gives an error.
    How can i solve this problem?
    Any inputs will be very helpful.

    Hello Martin,
                     thnks a ton for your replies.
    The '.' is a standard thing.
    Its the part of the WSDL file which is a standard WSDL file for a service offered for a standard SAP BAPI. So i haven't changed anything.
    Its what is standardly available. So i cant anything on that.
    And the response element is not below the bapi node.
    The name of the root node of the BAPI return context is
    "BAPI_INQUIRY_CREATEFROMDATA2.Response"
    This is what is causing the problem.
    Please note here that '.' is not responsible for any hierarchy. Its the name of one single root node element.

  • Web service request formatting problem

    I'm trying to create a few interfaces to work with some web services that we have published within our organization. Creating the web service reference seems to go fine. We had to work through the details of getting that working over SSL and we seem to have gotten past that hurdle.
    Problem is that when I either test the web service reference through the testing page of the Apex app builder or attempt to call the web service from a page built on the web service reference I'm getting an error indicating that the XML of the SOAP request isn't properly formatted. Specifically, it seems that Apex is inserting an extra double-quote at the end of each element tag for all the input parameters.
    So I have this:
    <SOAP-ENV:Header><ns1:parameters xmlns:ns1="urn:GetIncidentTest"><ns1:userName">
    Notice the double-quote at the end of the userName element tag.
    The error message says:
    Element type "ns1:userName" must be followed by either attribute specifications, ">" or "/>".
    So it's seeing the double-quote where it's not expected/supposed to be and returning an error.
    It would seem to me that Apex must be putting that extra double-quote in there at request time, since the web service definition (the WSDL) seems to return all the proper parameters all neatly layed out in the testing page and any other pages I build off the service definition.
    Anyone got any ideas on this?
    Earl

    Jeff,
    That text() thing came from the Oracle magazine example. I've been looking in the documentation for an explanation of what it's for but haven't had any luck finding anything yet.
    Here's a sample response
    <?xml version="1.0" encoding="utf-8"?>
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <soapenv:Body>
    <ns1:HelpDesk_QueryList_ServiceResponse xmlns="urn:Port"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:ns1="urn:Port">
    <ns1:getListValues>
              <ns1:Assigned_Group>Voice Services</ns1:Assigned_Group>
              <ns1:Assigned_Group_Shift_Name/>
              <ns1:Assigned_Support_Company>University of Utah</ns1:Assigned_Support_Company>
              <ns1:Assigned_Support_Organization>Office of Information Technology</ns1:Assigned_Support_Organization>
              <ns1:Assignee>JULIA JONES</ns1:Assignee>
              <ns1:Categorization_Tier_1/>
              <ns1:Categorization_Tier_2/>
              <ns1:Categorization_Tier_3/>
              <ns1:City>Salt Lake City</ns1:City>
              <ns1:Closure_Manufacturer/>
              <ns1:Closure_Product_Category_Tier1>Voice / Telephone Services</ns1:Closure_Product_Category_Tier1>
    <ns1:Closure_Product_Category_Tier2>Phone</ns1:Closure_Product_Category_Tier2>
    <ns1:Closure_Product_Category_Tier3>Coral</ns1:Closure_Product_Category_Tier3>
              <ns1:Closure_Product_Model_Version/>
              <ns1:Closure_Product_Name/>
              <ns1:Company>University of Utah</ns1:Company>
              <ns1:Contact_Company>University of Utah</ns1:Contact_Company>
              <ns1:Contact_Sensitivity>Standard</ns1:Contact_Sensitivity>
              <ns1:Country>United States</ns1:Country>
              <ns1:Department/>
              <ns1:Summary>Calling to outside numbers rings busy or just drops call</ns1:Summary>
              <ns1:Notes>Found trouble and corrected.  I will follow up with Cindy later today</ns1:Notes>
              <ns1:First_Name>CINDY</ns1:First_Name>
              <ns1:Impact>4-Minor/Localized</ns1:Impact>
              <ns1:Incident_Number>INC000000000230</ns1:Incident_Number>
              <ns1:Internet_E-mail>[email protected]</ns1:Internet_E-mail>
              <ns1:Last_Name>SOMEBODY</ns1:Last_Name>
              <ns1:Manufacturer/>
              <ns1:Middle_Initial/>
              <ns1:Organization/>
              <ns1:Phone_Number>888/555-6648</ns1:Phone_Number>
              <ns1:Priority>Low</ns1:Priority>
              <ns1:Priority_Weight>1</ns1:Priority_Weight>
              <ns1:Product_Categorization_Tier_1>Voice / Telephone Services</ns1:Product_Categorization_Tier_1>
         <ns1:Product_Categorization_Tier_2>Phone</ns1:Product_Categorization_Tier_2>
         <ns1:Product_Categorization_Tier_3>Coral</ns1:Product_Categorization_Tier_3>
              <ns1:Product_Model_Version/>
              <ns1:Product_Name/>
              <ns1:Region/>
              <ns1:Reported_Source>Other</ns1:Reported_Source>
              <ns1:Resolution>Misconfigured Trunk was corrected
    No futher reports of trouble</ns1:Resolution>
              <ns1:Resolution_Category/>
              <ns1:Resolution_Category_Tier_2/>
              <ns1:Resolution_Category_Tier_3/>
              <ns1:Service_Type>User Service Restoration</ns1:Service_Type>
              <ns1:Site>0523 Moran Phase II</ns1:Site>
              <ns1:Site_Group/>
              <ns1:Status>Closed</ns1:Status>
              <ns1:Status_Reason>No Further Action Required</ns1:Status_Reason>
              <ns1:Urgency>4-Low</ns1:Urgency>
              <ns1:VIP>No</ns1:VIP>
         </ns1:getListValues>
    </ns1:HelpDesk_QueryList_ServiceResponse>
    </soapenv:Body>
    </soapenv:Envelope>When I use the wrong node syntax I get an error saying that the node is invalid. However, when I set the xpath value to /HelpDesk_QueryList_ServiceResponse, with or without the /text() suffix I get the error I mentioned in my last post.
    Is that any more help? Sorry I'm such a noob with the XML stuff. I was hoping to avoid this level of detail by using the WSDL, but we already know that story. Thanks.
    Earl

  • ADFMobile - Web service data control problem for android

    Hi,
    I created an application for android and testing it on an emulator.
    I am able to create web service data control for a jax-ws web service. But when I invoke the web service and the call comes to the web service host, there are no namespaces in some of the parameters. Typically, the tags which do not have the namespace are complexTypes. All the values of the parameters come properly. I have tried executing the data control in three different manners but still no luck.
    AdfmfJavaUtilities.invokeDataControlMethod(..);
    AmxMethodActionBinding.execute();
    +#{bindings.invokeMethod.execute}+
    Thanks.

    Hi there,
    Can you try to generate a sample JAX-WS the generates a similar complex structure that can help you and us to isolate the issue? I created a jax-ws service using simple complex type on Ubuntu and also a client mobile application getting no problems running it. But, perhaps you are using a more complex structure, hence an standalone would be very useful.
    Juan C.
    Edited by: Juan Camilo Ruiz on Dec 10, 2012 4:00 PM

  • Web Service - SSL handshake problem

    I'm trying to stabilish a SSL connection to Web Service using the Jakarta AXIS WebService (client) API in WAS environment.
    And sometimes i got the follow stacktrace:
    ; nested exception is:
         javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found
    Does someone have any tip to help me solve this problem?
    Thank you.

    Hi,
    you will have to import the server SSL certificate from the webservice into you client. To do this, you will have to import it into the keystore of your client.
    br,
    Tobias

  • Web service with login soap action

    Hi !
    I would an explanation if the XI soap adapter can resolve the web service's flow below:
    1 - soap action login with the first wsdl;
    2 - reception of the session header;
    3 - when the soap action that needs be called to solve, the session header (cookie saved) must be written inside the http protocol header (from the cookie saved) and after that to send with the second wsdl.
    If there are another thing  to resolve, I would thank about.
    Thanks for your attention.

    Hi thanks for your input, but did you have to encode your binary data stream in say Base64 / utf-8 ? Also if you are transferring files in bulk(say 10 -100 files)  how does your web  service indicate end of one file or what is the best way so as to avoid performance problems.
    Regards,
    Aditya

Maybe you are looking for