Web Services - Flight booking scenario

Hi all,
I'd like to set up a demo on web services, which should be based on the well-known flight booking scenario of XI 3.0.
Could anyone tell me where I could find EJBs and/or Java code for which I could generate my WS ?
Thanks !

Are you looking for consuming the flight booking web services through XI or creating similar web services in Java?
To consume flight booking web services, please refer to the Exchange Infrastructure section for more information.
To create Web Services in Java, please refer to:
http://help.sap.com/saphelp_nw04/helpdata/en/f7/af60f2e04d0848888675a800623a81/content.htm

Similar Messages

Web Service to FTP scenario - MAPPING.NO_MAPPINGPROGRAM_FOUND error

Hi,
I am developing a Web Service to FTP scenario in XI, I am testing the interface by writing a client program using AXIS. when I invoke the service from the client, it is able to hit the service and writing the file to FTP with the data However the client is program receiving a fault with the below error.
"SystemError:<context/><code>MAPPING.NO_MAPPINGPROGRAM_FOUND</code><text>Unable to determine name of mapping program</text>"
I set quality of service to 'Exactly Once' on the SOAP sender adapter.
Would appreciate any help on this.

Hi,
What is the URL to which you are posting the SOAP message?
Is it?
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet? channel=<party>:<service>:<channel>
If yes, then like mentioned the QOS is picked from the Sender SOAP adapter.
But, if the URL is ,
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Then you need to give the QOS as <b>,&QualityOfService=ExactlyOnce</b> appended to the above URL.
More, /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards
Bhavesh

Web Service to IDoc scenario: No receiver could be determined error

Hi. I am working on a web service to IDoc scenario. I am receiving this error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I've taken the XML message being sent to me and tested the mapping and I've completed the test configuration in the IB. Both work fine. Any ideas? I've been looking into this for a couple of days, so I've been through all the previous posts I could find.
Thank you.
Nicole

hi,
This is not related to receiverdetermination ,whether you creaeted or not.
It is somthing related to receiver systemwhich was configured in Receier determination.
check the target BS is correct or not or the inbound interface.
Did you configured the proper receiver technical system..
OR
Check the Receiver Determination is configured correctly. i.e R/3
Verify all the configurations like SM59, Partner Profile/Logical systems. etc. Also check in SM58 of R/3 system.Make sure that All the objects are activated in the Directory.Refresh the cache.Verify is the business system is pointing to correct R/3 system . Go to Business system/Service->Menu->Adapter specific identifiers in the directory
You can test your configuration with sample
payload.
In ID goto to TOOLS -
> Test Configuration for testing.
Hope in this way you can still find at which point the interface goes wrong.

WEB SERVICE TO ORACLE SCENARIO

Hi all,
I have to develop a web services to Oracle scenario. My problem is that I need to executed selects and stored procedure at runtime in the mapping. I mean that i need to check some values from the inbound during the mapping execution I did that before in Sap R/3 but i don´t know how to execute it in a Database.
Many thanks for your help!!!
Regards
Noelia

hi,
you can use standard API to do this lookup in
the mappings:
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

SAML2.0 for web services - sender-vouches scenario

We would like to configure this scenario using SAML2.0 assertion tickets. We are on ECC 6 EhP6.
Configuration in SAML2 has been completed - no WS security policy has been configured in order to support the sender-vouches scenario.
WSS_SETUP has run to use SAML.
When configuring the web services we are using https for transport and SAML for authentication - the wsdl generated in this case references SAML1.1 and as result we get an error of Wrong token type received. Endpoint expects SAML 1.1 token.
The question is: can SAML2.0 be used for sender-vouches scenarios or not?
Any input or help would be greatly appreciated.
Thank you,
Miklos

Hi Miklos,
Yes you can use SAML2.0 for Sendor-vouches scenarios.
Please see the below link for configuration process:
http://help.sap.com/saphelp_nw73/helpdata/en/b5/014086933d4576bba1b4c7e9533f4b/content.htm
I hope it will be helpful for you.
Regards,
Gourav
Message was edited by: Gourav Kumar Jena

Web service to File scenario

hello experts
I would like to know how to configure WS to File Scenario.
(if possible all the steps will be appreciated)
thanks
Kfir

Hi kfir goldwasser,
Here is a scenario i'm explaining webservices(SOAP) to file scenario step by step:
SENDER SOAP ADAPTER: The sender SOAP adapter is basically used to send content from remote clients or Web service servers to the XI.
To do the end to end scenario let us consider a simple scenario
IR:
1. source data type
2.target data type
3.MT for Both
4.Message interface for both
5.message mapping
6.interface mapping
ID:
1)Define Serder Comunication channel type SOAP.
in DEFAULT XI PARAMETER you must put Message interface and Namespace of serder structure defined in IR
2) Define Receiver Communication channel.
3)define Receiver Determination
3)define Interface Determination
4)Define Sender agreement
5) Define Receiver Agreemen.
6)Active your changes.
DEFINE WEB SERVICE:
7)go to tool>enviroment>define Web services and put this string
http://<Host>:<Port>/XISOAPAdapter/MessageServlet?channel=:<Bussines_System>:<Communication Channel>.
Example: http://srv-xi01-adm:50000/XISOAPAdapter/MessageServlet?channel=:SCR_D:scr_d_soap_customer_sender
8)next step select MI of list
9)en next step you must define your sender BS and Message Interface.
10) Save Web service.
Test ur service with for example XML-Spy
Steps to make a request using the XML SPY:
1. Open the XML SPY, in the menu go to SOAP  Create new SOAP request
2.it will open a new window you will provide the path wsdl file that you have recently save .
3.Click on OK button a new window will be opened which shows the SOAP request
4.In the menu choose SOAP  Send request to server
5.Asynchronous Request: If your request is successful you will receive a SOAP response which will be empty response in an asynchronous request .
to configure file receiver adapter take in mind these blogs
File Receiver with Content Conversion
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
For webservice to file scenario:
Plz Do check the following blog:
Invoke Webservices using SAPXI
In your case, receiver is file.. so you need to create Message Interface etc for the file output..
Also refer this document to understand the steps-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
For SOAP see below links
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
An Overview of SOAP
An Overview of SOAP
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
Regards,
Vinod.
Edited by: Vinod Reddy on Jul 1, 2008 9:46 AM

Importing test data into "Web Service Navigator Test Scenario" fails

Hello,
I'm using NW 7.2 Java and have the following problem: when I try to import a XML file containing test data as scenario in the web service navigator and when I execute the scenario or just click on the details of on entry, all input parameters are gone except the first one!
The XML file was created by the web service navigator itself. I added a few sample web service calls using the web service test function and exported the resulting scenario afterwards. The XML file looks like this (some parameters blackened):
<?xml version="1.0" encoding="UTF-8"?>
<rn1:services WSILURL='' xmlns:rn0='java:sap/standard' xmlns:rn1='http://www.sap.com/webas/2007/02/ws/wsnavigator/' xmlns:rn3='http://schemas.xmlsoap.org/soap/encoding/' xmlns:rn2='http://www.w3.org/2001/XMLSchema'>
<rn1:service name='OrderService' namespace='http://test.sap.com/Scenario/OrderService/' WSDLURL='host:port/sapws/scenario-processes-models_OrderService/OrderService_SAP_DEFAULT_PROFILE_Service/HTTPAuthOverHTTP_1?wsdl&mode=ws_policy'>
    <rn1:operation name='receiveOrder'>
      <rn1:input>
        <Customer>Customer1</Customer>
        <Product>Product1</Product>
        <Quantity>100</Quantity>
        <DeliveryDate>2010-08-19T14:06:24.691+02:00</DeliveryDate>
        <BlockedOrder>false</BlockedOrder>
      </rn1:input>
      <rn1:output></rn1:output>
    </rn1:operation>
    <rn1:operation name='receiveOrder'>
      <rn1:input>
        <Customer>Customer2</Customer>
        <Product>Product2</Product>
        <Quantity>200</Quantity>
        <DeliveryDate>2010-08-19T14:06:24.691+02:00</DeliveryDate>
        <BlockedOrder>false</BlockedOrder>
      </rn1:input>
      <rn1:output></rn1:output>
    </rn1:operation>
</rn1:service>
</rn1:services>
Thanks in advance for any comments on that issue!!!

Hi
Hi,
You can use XML editors like XMLSPY to send the SOAP request or SOAP client tool provided by SAP for this purpose.
SOAP client- https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/downloads/tools/sap%20nw%20application%20server/sap%20soap%20client%20tool%20download.abst
Various methods to Testing SOAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7ccd3e4e-0501-0010-95ae-afa58cb46b75
http://www.soapui.org/gettingstarted/your_first_soapUI_project.html
Hope it helps,
Regards,
Abhishek

Web service to IDOC scenario

Hi,
I'm defining Web service (through the configuration builder) and the message interface that i'm using to publish is based on idoc.
when i'm trying to check the WSDL which was generated, in the wsnavigator i'm getting the following error:
"cannot download WSDL from http://<server.....filename.wsdl: cannot load java.class: typename = /wsdl:definition/wsdl:types/xsd:schema/xsd:elemen/xsd:complexType, elementName=TEST_BASIC_TYPE
please advise,
Pavel Sheynkman.

I think you have used the proposed url which was mentioned in defining the webservice in configuration. better to use this link:
http://hostname:port/XISOAPAdapter/MessageServlet?channel=:<service>:<sender channel name>.in that url. you have to mention the hostname of the server and the port number.

What is a web service address book sample in IBM RAD.

Hi,
I started learning web services by running sample programs provided by RAD. I followed instructions to run the sample to see what the web service will do. But could not. If anyone gone through the example, Can You please take some time to explain.
Thank you.

R u using axis. If you want to stick with axis and don't want to use JBossWS there is nothing else you need to do. Move all the axis to Jboss. If you plan to reimplement all ur services in JBossWS here it is:
http://jbws.dyndns.org/mediawiki/index.php?title=Quick_Start
http://jbws.dyndns.org/mediawiki/index.php?title=User_Guide
Let me know if you need anything else.

Web Service Scenario Not Working

Hi Sdners,
I am working on Support project where I have web Service to RFC Scenario which is synchronus scenario. when the user sending the WSDL request to XI it's woking fine in for Devlopment but it is not working QA .In QA i am gettings error below
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZCA_RATE_INTF.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I asking user to send the message from their they are coming to QA syetm insted of DEV.........for this where I have to check........
Edited by: gangadhar kh on Mar 3, 2010 12:29 PM

HI All,
Can anyone help me on this?
there is no communication is going between the sender system(Web Service) to PI . When user is sending the data through URL he is not able to send the data and when he is sending the data . I am getting the message in PI/XI(MONI) messsage coming (with system Error with balls sign)

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZCA_PRICE_F_EX_RATE_INTF.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and IN payload of This message
RFC_ERROR_SYSTEM_FAILURE</ID><Attributes><V1>CALL_FUNCTION_NO_DEST</V1>
Please suggest on this Problem
Regards
Edited by: gangadhar kh on Mar 8, 2010 6:00 AM

TIBCO - XI SCENARIO - Web Service ?

I starting in project to integrate Aspentech, what use Tibco eai, with R3 using XI.
In my first analyze I design a interface using Web Service Adapter, using asynchronous scenario.
I would like, same opinions about benefits and problems using web service or other scenario, like jms, etc.
sds
Marco Zerbini

Hi Marco,
Ur decision should b based on the fact that which system is most convenient for u to transfer the data
If u r thinking of JMS, then do you already have a message queuing infrastructure in place. This could be otherwise an extra task
HTTP is generally used for better performance
General advantages of using web service
http://dev.systinet.com/doc/ssc-60/primer/html/using.web.services.html
http://www.estrategy.gov/presentations/umd_e-gov_ent_arch/sld015.htm
General disadvantages of using web service
http://www.samspublishing.com/articles/article.asp?p=31555&rl=1
http://www.omg.org/news/whitepapers/CORBA_vs_SOAP1.pdf
Regards,
Prateek

Issue with SSL in web service.

Hi All,
We are having synchronous web service to proxy scenario in XI. We are trying to send a binary data using the SOAP web service to SAP via XI. Initially, we were posting large binary data using HTTP connection via XI from the SOAP client. The scenario was working without any issues.
Since the data is sensitive changed the web service from HTTP to HTTPS.The interface works without issues when we test it using the SOAP client for testing. When the data is sent using the Dot Net application (the end application) using the same webservice, URL (HTTPS connection) the message errors out. The connection is borken and the message fails. In this scenario, XI does not even receive the message which I can make out looking into the SOAP adapter communication channel.
The interesting fact here is the same Dot Net application is able to connect and send smaller binary data using HTTPS connection.
Could you please let us know if this could be the issue with HTTPS connection on XI side? I doubt it to be an issue on XI side because the adapter does not even receive any message when the scenario fails. But we used some HTTPS monitoring tools and found that the Dot Net Application receives some encrypted response from the server which the application is not able to decrypt and the handshake breaks.
Could you please throw some inputs into this issue.
Thanks,
Manohar.

Hi Manohar
You have posted the same question with two different subject text
anyway follow these SAP notes your problem will be short out
Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=856597&_NLANG=E
Note 856599 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 Mail Adapter
https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=856599&_NLANG=E
Note 870845 - XI 3.0 SOAP adapter SSL client certificate problem
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=916664&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=870845&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
check the OSS Note 554174 & see if it helps
Note 645357 - SAPHTTP: SSL error
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=645357&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1150980&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
one alternative may be Restart ICM (Internet Communication Manager) .This will solve your HTTP issue
Cheers!!!!
Regards
sandeep
if helpful kindly reward points

Invoking a AXIS Web Service with a Java object as input argument

Hi
I've been trying to execute a bpel process that invokes a web service deployed through axis.
This web service takes a java object as input argument as opposed to data types that are directly mapped to java types through the SOAP engine.
I deployed and tested the service outside of BPEL using a test client class. Everything works well.
When I try to configure the "Assign" and "Invoke" activities so that service can be invoked, I cannot see the data structure through the variable picker and I see the following message:
"The element {urn:ComplexTypeWebService}TimeSheetBean is not know to the schema container. Perhaps a schema file that uses it needs to include or import its definition.There mat also be an XML schema issue (non resolvable schema) which prevents {urn:ComplexTypeWebService}TimeSheetBean from being seen by the schema processor."
Is there any example that demonstrates how to invoke an axis web service in such scenario? What am I doing wrong?
Please, let me know.

The passing of Java objects in and out of a web service is NOT supported. variables must be xml documents defined by a XML schema. In my opinion, missing Java object and WSDL is not a good idea. -Edwin

Web Service calling a Stored Procedure thru a DB Link

hi guys,
I'm getting this error ORA-02064: distributed operation not supported when I invoke my Web service. My scenario is more like the #3 below. How can I simplify update when what I'm invoking is just inserting a record in a table.
- USER A calls, a procedure owned by USER B (w/c inserts to table X)
- USER A have insert, update rights to TABLE X owned by USER B
- USER A have execute rights to the procedure owned by USER B
- USER A does the calling by Callable statement
e.g. begin B.runme@dblink(?,?); end;
- USER B is an Oracle ERP SCHEMA user, USER A is just another oracle schema but not of any Oracle apps
- USER B runme Procedure have a COMMIT statement inside and an OUT parameter.
I have no problems in making this code run when procedure being called is not thru dblink.
I'm really have no other idea how to fix this. except for using a different user maybe B or C that logs to the same DB without using any other DB link.
I'm guessng, maybe Web Service does not allow such call which uses a DB link.
Help anyone?
below is the ORA explanation.
ORA-02064: distributed operation not supported
Cause: One of the following unsupported operations was attempted:
1. array execute of a remote update with a subquery that references a dblink, or
2. an update of a long column with bind variable and an update of a second column with a subquery that both references a dblink and a bind variable, or
3. a commit is issued in a coordinated session from an RPC procedure call with OUT parameters or function call.
Action: simplify remote update statement

You can check this example.

SOAP receiver adapter error using Google Search web service

Hi all,
I'm trying to connect and old 4.5b system to XI SP16 to make it receive information from external Web Services.
My scenario is made up of a sender RFC adapter and a SOAP receiver which is sending the message to the Google web service (http://api.google.com/GoogleSearch.wsdl) and then awaiting a response from it.
I'm stuck with this error: "No Deserializer found to deserialize a ':key'". The problem is that XI is sending this kind of message:
          <m:doGoogleSearch xmlns:m="urn:GoogleSearch" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
               <key>mykey</key>
               <q>testing</q>
               <start>0</start>
               <maxResults>1</maxResults>
               <filter>true</filter>
               <restrict>String</restrict>
               <safeSearch>true</safeSearch>
               <lr>String</lr>
               <ie>String</ie>
               <oe>String</oe>
          </m:doGoogleSearch>
while Google is expecting this:
          <m:doGoogleSearch xmlns:m="urn:GoogleSearch" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
               <key xsi:type="xsd:string">mykey</key>
               <q xsi:type="xsd:string">testing</q>
               <start xsi:type="xsd:int">0</start>
               <maxResults xsi:type="xsd:int">1</maxResults>
               <filter xsi:type="xsd:boolean">true</filter>
               <restrict xsi:type="xsd:string">String</restrict>
               <safeSearch xsi:type="xsd:boolean">true</safeSearch>
               <lr xsi:type="xsd:string">String</lr>
               <ie xsi:type="xsd:string">String</ie>
               <oe xsi:type="xsd:string">String</oe>
          </m:doGoogleSearch>
with explicitly declared xsi:type.
I've tested both messages with XMLSpy and the first one is always returning the same error.
Is there a way to make XI send an XML message with written xsi:type?
Many thanks in advance!
Max

Hi Ricardo!
I followed your suggestion to create a simple XSLT mapping program (in the ABAP stack) and I added it to the Interface Mapping in the Integration Repository. The result is exactly the soap message that the Google web-service is expecting.
I'm attaching the XSLT code below in case somebody has the same problem... thanks again for your hint!!
Regards!
Max
<xsl:transform version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:sap="http://www.sap.com/sapxsl"
>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
<ns1:doGoogleSearch xmlns:ns1="urn:GoogleSearch" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
      <key xsi:type="xsd:string"> <xsl:value-of select= "//key"/> </key>
      <q xsi:type="xsd:string"> <xsl:value-of select= "//q"/> </q>
      <start xsi:type="xsd:int"> <xsl:value-of select= "//start"/> </start>
      <maxResults xsi:type="xsd:int"> <xsl:value-of select= "//maxResults"/> </maxResults>
      <filter xsi:type="xsd:boolean"> <xsl:value-of select= "//filter"/> </filter>
      <restrict xsi:type="xsd:string"> <xsl:value-of select= "//restrict"/> </restrict>
      <safeSearch xsi:type="xsd:boolean"> <xsl:value-of select= "//safeSearch"/> </safeSearch>
      <lr xsi:type="xsd:string"> <xsl:value-of select= "//lr"/> </lr>
      <ie xsi:type="xsd:string"> <xsl:value-of select= "//ie"/> </ie>
      <oe xsi:type="xsd:string"> <xsl:value-of select= "//oe"/> </oe>
   </ns1:doGoogleSearch>
</xsl:template>
</xsl:transform>

Web Services - Flight booking scenario

Similar Messages

Maybe you are looking for