Web Services Log files

Hi Experts,
I was wondering if there is any way to read/access the log file which is generated while making a web services call . If yes then How??
Thanks & Regards
Sablok

Similar Messages

Where yo find reporting services log files in sharepoint 2013 integrated mode

i use to find the reporting services log files in the msrs folder in sharepoin 2010 integrated mode. but when we migrated to sharepoint 2013. i am not able to find the logs.i wanted to check all the executed sql statement using the logs as we don't have
access to sql server profiler. does anybody know the location of yhe logs?

Hi there,
Not sure you'll see the sql statements however you can find information on the ULS logs here:
http://technet.microsoft.com/en-us/library/cc627510(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/ff487871(v=sql.105).aspx
and here:
http://technet.microsoft.com/en-us/library/ms156500(v=sql.105).aspx
You might want this once ULS log is capturing info.
http://archive.msdn.microsoft.com/ULSViewer
cheers,
Andrew
Andrew Sears, T4G Limited, http://www.performancepointing.com

(261936172) Q general Where are the Web Service source files?

Q <general> Where are the source files for a Web Service created
with WebLogic Workshop stored? How do I deploy the Web Service
on a different WebLogic Server? Is there a way to bundle the
Web Service project files manually to distribute them?
Is there a way to configure the directory where Workshop stores
the files?
ANSWER: (by Adam Fitzgerald, [email protected]) The .jws files are stored
in the project folder. This can be located on a local system, although by default
they are in c:\bea\wlserver700b\sample\workshop\applications. The Web Service
structure is understood by WLS 7.0 so by archiving the appropriate folder you
can transfer the Web Service in its entirety from one deployment to another.

Hi Dean,
In SharePoint 2013 Designer, the help files are online. They provide tons of general information regarding SharePoint Designer 2013. You can also find help files at:
http://technet.microsoft.com/en-us/library/jj219638%28office.15%29.aspx .
And find a great set of information on SPD 2013 and the new Workflow architecture here:
http://msdn.microsoft.com/library/office/jj163986(v=office.15)
More information, please refer to the link:
http://blogs.msdn.com/b/sharepointdesigner/archive/2012/08/07/welcome-to-sharepoint-designer-2013-customer-preview.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Web Service mapping file

You will be greatly appreciated if you can help me on following question:
In a web service mapping file, under <java-xml-type-mapping> element, either <anonymous-type-qname> or <root-type-qname> is valid element according to schema. My question is which one should be used under which situation?
Thanks,
Michael
===========
Mapping file
===========
<java-wsdl-mapping xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://www.ibm.com/webservices/xsd/j2ee_jaxrpc_mapping_1_1.xsd"
version="1.1">
<package-mapping>
<package-type>test</package-type>
<namespaceURI>http://test/</namespaceURI>
</package-mapping>
<java-xml-type-mapping>
<java-type>test.Status</java-type>
<anonymous-type-qname>{http://test/}Status</anonymous-type-qname>
<qname-scope>complexType</qname-scope>
==========
Schema
==========
<xsd:sequence>
<xsd:element name="java-type" type="j2ee:java-typeType">
<xsd:annotation>
<xsd:documentation>The java-type element is the fully qualified class name of a Java class, primitive, or array type.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<choice>
<xsd:element name="root-type-qname" type="j2ee:xsdQNameType"> <xsd:annotation>
<xsd:documentation>The root-type-qname identifies the WSDL QName of an XML type.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="anonymous-type-qname" type="j2ee:string">
<xsd:annotation>
<xsd:documentation>The anonymous-type-qname identifies the WSDL QName of an anonymous XML type.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</choice>

I am stuck here with the same problem - don't know what to do with the (required) Mapping File.
Has anyone found out?
Please let me know.
Best,
Philipp
[email protected]

What determines the location of the shared services log files

I've just completed an install and configuration of Shared Services 9.2.1. The shared services log files, SharedServices_Security.log, SharedServices_Admin.log, etc., are being written to the C:\WINDOWS\system32\null\logs\SharedServices9 path. These files should be written to the Tomcat application folders in the Shared Services home, CSS_HOME, folder. e.g. d:\hyperion\sharedservices\9.2\appserver\installedapps\tomcat\5.0.28. This is according to the Shared Services installation documentation.
Is there any way to get these log files written to the d: drive? The following references sharedservices.logdir from the hsslogger.properties file but I don't see where a value is set that I can change.
log4j.appender.FILE.File=${sharedservices.logdir}${file.separator}SharedServices_Security.log
Thanks,
Tom

Hi there!
Are you looking for the AOM log file?
By default it´s located at:
SIEBEL_ROOT\ENTERPRISE\SIEBEL_SERVER\log
If you can´t find the AOM log files here, try to check the "Log directory" server parameter value.
Best regards,
João Paulo

Location of Orchestrator Web Service Logs

Anybody know where Orchestrator hides any web service logs? i'm troubleshooting an issue.

Hi,
Hope it helps you:
http://technet.microsoft.com/en-us/library/hh912318.aspx
http://technet.microsoft.com/en-us/library/hh488400.aspx
Natalya

Web Services logging

Hi,
There is no log and trace records are available under the Web Services Log Viewer in a CE System
NWA> SOA Management >Logs and traces > Web services logging and tracing
what are to be checked and why it's not showing .
Thanks in ton

Hi,
Check the logs in NWA > Prblem Mgmt > Logs & Traces > Deafult Trace
Regards
Priya

Dashboards web service config file set up

I am new to dashboards and want to understand, how do we make a web service connection to the dashboard?
We previously had the web services set up and never got a chance to set it up, but now there is a need to set it up in our own machines.
The issue exactly being faced right now is:
we tried setting up the web service config file and it works when we execute it ( i.e. I get a URL) but it comes as
http://localhost:2910/QueryService.asmx
which we tried using as " http://localhost:2910/QueryService.asmx?wsdl " in the dashboard connection manager and i am able to get the methods (runSQLQuery etc).
When trying to see the dashboard in the bo Infoview, we get the below error:
To access external data, add a Cross Domain policy file to the external data web server.
Please help me in understanding the issue and significance of all these things.
Any help would be appreciated.
Thanks,
Khushboo

First of all change localhost to proper host name or IP address in connection.
You need to place crossdomain policy file in the root of the web server. Please check this for details:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40c58930-c78f-2f10-cf82-8b90999065cc?overridelayout=t…
http://www.adobe.com/devnet/flashplayer/articles/cross_domain_policy.html

Merging web-services.xml files

Good day,
Is there an easier way to merge a custom web-services.xml file with the
one generated by servicegen? It makes it very difficult to have a clean
build when you have to go in and edit the web-services.xml to add your
own types.
Thanks,
Sean

This is no good tool to merge web-services.xml.
You can run servicegen once and get the web-services.xml file, then modify
it as you need.
In your automatic build process, run autotype, then use wspackag to package
your customized web-services.xml.
Thanks,
-Neal
"Sean Garagan" <[email protected]> wrote in message
news:[email protected]..
Good day,
Is there an easier way to merge a custom web-services.xml file with the
one generated by servicegen? It makes it very difficult to have a clean
build when you have to go in and edit the web-services.xml to add your
own types.
Thanks,
Sean

Sync Services Log file very large

user>library>application support>sync services>local
My Sync Services log file was over 111 Gb. It appears to grow in size every day. I have reset SyncServices per Apple. http://support.apple.com/kb/TS1627
I even deleted the contents of the local folder (not recommended per apple, but seems fine) and still my syncservices.log grows and is taking over my hard drive.
I use Entourage and Sync Services is used to Sync iCal/Address book (then for my iPhone sync).
Any suggestions to stop this out of control log?!?

Hi,
Increasing the size of the redo logfile size may reduce the number of switches as it takes time to fill the file up but your system's redo generatin will stil be the same. Reduce the frequent commits.
Use the following notes to further narrow down the possible root cause.
WAITEVENT: "log file sync" Reference Note [ID 34592.1]
WAITEVENT: "log file parallel write" Reference Note [ID 34583.1]

Mmp services log files rotation

Hi,
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS mta01 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V240
I'm trying to find out what setting controls mmp services log file rotation and how to change it. Presently, it appears rotation take place daily and files are kept forever.
ImapProxy_<date>.log
AServices_<date>.log
I would prefer to only keep these files for a week or so.
Should I configure:
local.schedule.prune_mmp = "45 23 * * * /usr/bin/find /var/opt/SUNWmsgsr/log -name ImapProxy\* -atime +3 -exec rm {} \; "
local.schedule.prune_mmp.enable = 1
Thanks.

d-v-k wrote:
I'm trying to find out what setting controls mmp services log file rotation and how to change it. Presently, it appears rotation take place daily and files are kept forever.There is no inbuilt Log Rotation mechanism for the MMP logs.
ImapProxy_<date>.log
AServices_<date>.log
I would prefer to only keep these files for a week or so.
Should I configure:
local.schedule.prune_mmp = "45 23 * * * /usr/bin/find /var/opt/SUNWmsgsr/log -name ImapProxy\* -atime +3 -exec rm {} \;
local.schedule.prune_mmp.enable = 1This is definitely one way to prune the log files. I would use the following find string instead:
{code}
/usr/bin/find /var/opt/SUNWmsgsr/log/ -name 'ImapProxy_*.log' -mtime +6 -exec rm {} \; "
You would need to write/enable a similar rule to prune the AServices_*.log files as well.
Regards,
Shane.

Why i am I getting Error (5,8) TestCas for a Web Service Test File Generate

why i am I getting the following error for a Web Service Test File Generated by jdeveloper when i run it:
Error (5,8) TestCase not Found
Error(12,14):constructor Object(java.lang.String) not found in java.lang.Object

actually i removed that error by added the junit.jar to my libraries but i am getting a new error when accessing the webservice with a Jdev generated web service proxy:
WARNING: Unable to connect to URL: https://mytest.test.com/WebService/MyTest_1.0/soap.soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11977)
     at project7.proxy.MyTestClient.echoOfficeLocation(MyTestClient.java:1276)
     at project7.proxy.MyTestClient.main(MyTestClient.java:38)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:174)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:150)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:176)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:113)
     at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11961)
     ... 2 more
Process exited with exit code 0.
looks like something to do with the certificate or keystore... how do you add the keystore to JDev.. i tried the JDK cacert but that doesnt work...

How to write Web Service Log to a file in Java

Hi..
I have a requirement that I need to maintain Log file of my web service which is deployed on OC4J server.
Is there any API for this ? Or any other way to do it ?
Regards,
Ajay

Hi..
Thanks.
Instead of using Logging API, I created own class to handle Log.
But my issue is When Ever I am appending Log to already created file the following Line is also appending.
<?xml version = '1.0' encoding = 'UTF-8'?>I want this Line only one time in each log file.
What should I do for this ?
Regards,
Ajay

Web server log files under LabVIEW RT

Hello,
Is there any log files for the web server under LabVIEW RT running on a PXI? The log file checkbox is disable in the target options.
Also, is there a way to find out if the web server is running on the target?
I'm asking the question because I can't access anymore a remote panel (and even the root of the web server) on my PXI. I reinstall everything and I still have the issue. I'm pretty sure that IT changes some network settings but they say no. I need to validate that everything is working on my side before before taking further action.
Thanks,
Patrick

Hi Patrick,
I would suggest having the log file checkbox enabled in the target options. That should show if errors are occurring while it is running. Are you running remote front panels and web services, or just remote front panels?
Can you provide a picture of all the software you have installed on your PXI? You should be able to find this in MAX under the PXI in Remote Systems.
Scott A
SSP Product Manager
National Instruments

Trouble compiling web service client file

Hi,
I am trying to deploy a test web services implementation on JBoss 3.2.1 and Axis 1.1RC2. The problem is, I cannot even compile my client code (the one that invoke the web services)...it seems that the java compiler cannot locate the following packages:
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
even though I have set my classpath (in the environment var part of my Win2k box) to: C:\axis-1_1RC2\lib\axis.jar;C:\axis-1_1RC2\lib\jaxrpc.jar;C:\axis-1_1RC2\lib\saaj.jar;C:\axis-1_1RC2\lib\commons-logging.jar;C:\axis-1_1RC2\lib\commons-discovery.jar;C:\axis-1_1RC2\lib\wsdl4j.jar;C:\axis-1_1RC2\lib\;C:\axis-1_1RC2\[rest of classpath truncated]
Has anyone experienced something similar? I'll award Duke dollars to the first person getting the right solution. Thanks!
Here are the error messages:
C:\web_clients>javac DataUserClient.java
DataUserClient.java:1: package org.apache.axis.client does not exist
import org.apache.axis.client.Call;
^
DataUserClient.java:2: package org.apache.axis.client does not exist
import org.apache.axis.client.Service;
^
DataUserClient.java:3: package javax.xml.namespace does not exist
import javax.xml.namespace.QName;
^
DataUserClient.java:26: cannot resolve symbol
symbol : class Service
location: class DataUserClient
Service myWebServ= new Service(url, "StandardPersonData");
^
DataUserClient.java:26: cannot resolve symbol
symbol : class Service
location: class DataUserClient
Service myWebServ= new Service(url, "StandardPersonData");
^
DataUserClient.java:27: cannot resolve symbol

Hi,
I had the same problem with my client too. The problem is with your classpath. You have to set it at the command prompt as well as editing the setclasspath.bat file. The full path to where you libs are stored is required. eg:
set classpath=%classpath%;C:\axis-1_1\lib\axis.jar;C:\axis-1_1\lib\jaxrpc.jar...etc
I tried to set the classpath using %axisDirectory%\lib\axis.jar ...etc but it didnt work for whatever reason. The above method seems to eliminate all errors. At the moment im just running axis 1.1 under tomcat 4.1.
Hope that helps :-)

Web Services Log files

Similar Messages

Maybe you are looking for