Web Services - RFC

Hi Guys,
I have to work and configure the scenario from Websrvices to SAP.
Can anyone let me know the process and steps to setup / Configure the
scenario for Web services --> RFC.
Thanks a lot in Advance.
Regards,
Kittu.

Hi,
The process is same as any other regular scinarios..
First in the IR :
Create MI, MM, IM for the SOAP Messages if you are using External Definations for the SOAP messages You no need of DT and MT
one is important is the SOAP Message is Syncronous or Asyncronous..
Secound in ID:
Creat communication chennel for SOAP as sender and RFC as Receiver
then Create Receiver Determination, Interface Determination and Aggreements...
then test initially the Receiver Determination by going to Tools --> Test Configuarations
Develop the WSDL file
Then You can use the tools SOAP SONAR or XML SPY to test the SOAP Messages
Import the wsdl file in to above mentioned tools and provide the user name and password of the R/3 system where RFC recides and send it and if it is syncronous you will receive the vaild response back...
Amaresh

Similar Messages

Error Web Services RFC proxy - Application Server

Hi,
I configured the Web services consumer. The architecture requires passage through a proxy. Now when I check the RFC of WS from Central istance the test is ok. While, when I check the same RFC from the application server, this asked by the user and password, resulting in authentication failure.
How do I solve my prolem?
Best regards,
Diego.

Hi Nagaraju
The checks are all ok. Then I contacted the network administrator, this was not the vision for SAP in the proxy.
The problem has been resolved.
Thanks for your cooperation.
Best regards,
Diego Garofalo.

Urgent: Web Service from Function Module

Hi guys, I am new to this area so please help to achieve following:
I want to show a demo to load data from a web service to BI. I have performed the following steps and dont know how to process further. Please help me in the sense where do I put the logic to show fields on the web service and .
1. I have created a web service data source in BI with four fields (Cal dat, material, amount and currency)
2. This created a Web Service /RFC FM automatically.
3. From this FM I created a web service (Utilities create web service from function module)
4. I followed the web service creation wizard.
Thanks,
sam

releasing and related steps are fine,
what i want to know is, BW/BI datasource will create a FM, from this FM inturn I will create a webservice.
Lets say BW/BI datasource has 4 fields account, company, amount & currency.
I want to enter these 4 values from the webservice which will bring these values to BW delta queue and eventually get loaded in BW.
For this process do I need to code anything in the FM or any other part of the system

Why Web services are used to send data not HTTP in Web dynpro for Java?

Is Web Dynpro for Java supports Web service , RFC as communication to other systems why http cannot be used in Wweb dynpro for java.........
Thanks and Regards,
CSP

Hi Pradeep,
Yes, Web Dynpro java supports web service, you can expose your web service as RFC Model to
communicate with others system. As per as HTTP is concern we don't have any
supportive method in web Dynpro. Insted of HTTP we use context in web dynpro to communicate.
Thanks
Anup

Calling web service from portal

Hi
I have created a webservice to RFC scenario in XI. Now I need to access this webservice from enterprise portal. how do i inlcude this web service in the portal. I want to use ABAP web dynpro.
thanks
sankar

Hi,
Refer these links:
Re: WebService Creation
http://www.riyaz.net/blog/index.php/2007/12/10/xipi-consuming-xi-web-services-using-web-dynpro-part-i/
How To Develop a Simple Web Service Application Using SAP NetWeaver Developer Studio & SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
Check this thread also.
Implementing Webservices Doubt
Invoke Webservices using SAPXI
Invoke Webservices using SAPXI
Testing XI exposed Web-Services
Testing XI exposed Web-Services
RFC as Web Service step by step approach in XI
Exposing Remote Function Module as Web Service in XI - Step By Step
Using RFC as WebService in WebDynpro
Creating and Exposing BAPI as Web Service and using it in Web Dynpro
RFC calls from Adapter modules...the Web Service Way!
How Web services play a key role on the SAP NetWeaver
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-500244687cbd30ffd
How to develop a Simple Web Service Application Using SAP NetWeaver Developer Studio & SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
How To... Set Up a Web-Service Related Scenario with SAP xi
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Enhancing Your Web Services with SAP Exchange Infrastructure
http://www.sappro.com/downloads/SAPXI.pdf
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on Aug 12, 2008 11:06 AM

Debugging a web service

Hi All,
I need to debug a web service (RFC-enabled function module in basis 640). Is it possible? I'm calling the web service from an adobe interactive form and need to see what is being passed to the web service.
Please let me know if you can think of a way to do this.
HTTP-enabled break-point did not work for me.
Thanks!
Roman D.

Hi All,
I need to debug a web service (RFC-enabled function module in basis 640). Is it possible? I'm calling the web service from an adobe interactive form and need to see what is being passed to the web service.
Please let me know if you can think of a way to do this.
HTTP-enabled break-point did not work for me.
Thanks!
Roman D.

Unallowed RFC-XML Tag (SOAP_EINVALDOC) - Web Service using ABAP Proxy

Hi there
I am trying to consume a Web Service using ABAP Proxies. I have done the following in the system:
I configured the HTTP and HTTPS Proxy settings.
I created a package with package interfaces SAI_TOOLS and SAPPINT included under the Use Access tab.
I created the proxy classes by using the WSDL provided by the system I'm trying to interface with.
I created my HTTP destination RFC via SM59.
I configured a logical port for the proxy.
I developed the ABAP code for calling the proxy.
In the code the exception CX_AI_SYSTEM_FAULT gets raised with error message <b>"Unallowed RFC-XML Tag (SOAP_EINVALDOC)"</b> when I call the method for passing data to the destination system in the proxy class.
I had a look at SM21 and the following message was written in the log:
<b>"SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)"</b>. I also looked at SAP Note 919886 which states that it can be dumps in the system, missing configuration or the path prefix of the RFC destination that is incorrect. I cannot find any ST22 entries. The trace file looks as follows:
SAP System ID: DGH
Client: 009
User: COLESKG
System time: 072910
System date: 20070531
SAP Release: 700
Host: hd307c
Operating system: AIX
DB System: ORACLE
Program: ZUK_IPA00003
Processing State: 0
Location: Client
Transport Binding: http://schemas.xmlsoap.org/soap/http
SOAP Application: urn:sap-com:soap:runtime:application:client
SOAP Runtime Protocol: http://www.sap.com/webas/630/soap
/runtime/protocol
SOAP Protocols: <initial>
Request Message: <initial>
Response Message: <initial>
Fault: <initial>
Registry: <initial>
SOAP Roles: <initial>
Trace Level: 3
Logging Level: 2
Monitoring Level: 0
Security Profile: <initial>
WS Security Protocol: <initial>
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to create client application for Proxyclass:
ZES_CO_PROCESS_EMPLOYEE_BATCH LP name: DEFAULT
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application created
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to initialize client application
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Try to initialize application
urn:sap-com:soap:runtime:application:client
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new runtime CL_SOAP_RUNTIME_CLIENT
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Try to register application
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Application registered
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Read type of transport binding from
configuration
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new transport binding type
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() Try to initialize
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() http://schemas.xmlsoap
.org/soap/http initialized
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Try to create request message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Request message created
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Try to create response message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Response message
created
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Try to initialize
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Check transport binding
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Create runtime protocol
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Runtime-intrinsic
Protocol as SENDER with Priority 5
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create trace header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Trace header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create logging header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Logging header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT()
Initialized
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Try to create instance for http://www.sap.com/webas/630/soap
/runtime/session/protocol::http://www.sap.com/webas/630/soap
/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Instance of CL_SOAP_SESSION_PROTOCOL created for http://www.sap.com/webas/630/soap/runtime/session/protocol::http://www.sap.com/webas/630/soap/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Session Protocol
as SENDER with Priority 5
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Try to configure features
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() Try to
create ICF Client for DESTINATION = ALSB
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() ICF
Client created by DESTINATION
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_DESTINATION_URL_PATH() Set
DESTINATION PATH = /SapHRSmartIntegrationWeb/processes/ProcessEmployeeBatch.jpd
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Features configured
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Application urn:sap-com:soap
:runtime:application:client initialized
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application initialized
Trace file opened at 20070531 073030 GMT SAP-REL 700,0,95
Error in module XMLParserGetNextElement:773
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfcpars.c#2 $
Unallowed RFC-XML Tag
Error in module XMLConverterReadTag:3061
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfccnvrt.c#5 $
Unallowed RFC-XML Tag(24)
Error in module ab_soap:4392
Id @(#) $Id: //bas/700_REL/src/krn/rfc/abxrfccal.c#2 $
failed with return code 1
It then must be something in the config. Has anyone got any idea why this message is encountered?
Kind Regards
Gustav Coleske
Message was edited by:
Gustav Coleske

Hi,
I have the same problem as described.
Can you give me a little more information about the error you have solved in the proxy.
Thanks for help
John

Web Service from RFC function module

Hi all,
I'm searching for a way to create web services from RFC-enabled function modules. I know there is a wizard, but it's not suitable for my problem:
I have around 30 function modules (number raising in near future) I want to enable for web services, most of them share the same structures representing the underlying data model. When one structure is modified (i.e. a new sub-structure is added) I have to recreate all web services, which is quite uncomfortable.
In addition, using the wizard results in one wsdl-file for each web service operation, that leads to an administration overhead using this web services from a java frontend.
So I'm searching for a "bulk creation". I also know the wizard can be used for a function group, but I can't put all my RFC-enabled function module in one function group, that would lead to confusion in the package.
Does anyone know how web services are created programmaticaly? If I had a function module which creates the web services I could write a function module which creates all web services I need.
Thank you in anticipation!
Florian

I'm not sure I understand the 're-create' part...how are you re-creating the web service? if you modify the interface of a function-based web service, then you use the 'modify operations' functionality (context menu - right-click) to regenerate the web service interface; this works for a function group based web service as well and hits all of the methods at once. As for the java overhead on function group services, stating the obvious, maybe you just need to lower the number of functions in your groups. We use .Net-developed applications with multi-function webservices and don't have any overhead issues.

Generate XML file from RFC using Web Services

Hi,
I am trying to save an RFC enabled Function Module output to an XML file using ABAP web services.
I could able to create Web Service and release it using WSCONFIG/WSADMIN. I can actually get the output in XML file when i launch the web service home page. But I need this to be done in the ABAP program itself. So If i run the RFC I could able to create,release web service and capture the Generated XML file by SOAP runtime.
Any FM available?
Thanks,
Ram Sanjeev

which version of WAS you are on .
if you are on WAS6.40 check the following weblog on how to consume webservice using the wsdl file.
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
lower version of WAS use class cl_http_client.
if this case you have to manually build the soap message.
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
Regards
Raja

Error during creation of web service from abap rfc

Hi,
I'm creating a web service from abap rfc (SE37), but at the end of Creation Wizard I have this error:
"web service object already exist".
This is my first web service creation. Into WSADMIN there are not web services with the same name.
How can I solve this problem?
Thanks!

Hi,
What system/release/SP do you use ?
Beginning with Netweaver 7.0 SP14, you configure Web services with SOAMANAGER and you don't see them with WSADMIN...
Regards,
Olivier

Exposing an RFC enabled function as a Web Service in Minisap

Hi all,
i'm trying to expose an RFC enabled function as a Web Service in my Minisap installation. Everything works fine, until i actually want to finish the Web Service wizard. It always quotes that the object can only be deployed in an sap paket. If i try to put it in the $TMP paket, by marking it as a local object, i always get the message that test objects can not be deployed in external pakets.
Any idea?
Furthermore the virtual interface with the name i selected in the Web Service wizard seems to exist, at least i can not try to deploy the Web Service again with the same name. Actually, i also can't find a place where i can delete the virtual interface. Any hint on that issue is also appreciated.
Thanks in advance!
/Marc

I wanted to write a web service adapter:
@WebService
public class MyWebService implements StreamSender {
     private StreamSender eventSender;
     @WebMethod
     public void echo(String msg) {
          eventSender.sendInsertEvent(new MyEvent(msg));
After deploying I've got NullPointerException, eventSender is null. This is because MyWebService instance is NOT on the spring context, since it was created by jetty via reflection.
So now I'm trying another approach. I want to inject an adapter from the spring context into the web service:
I wanted to write a web service adapter:
@WebService
public class MyWebService {
     private MyWSAdapter myAdapter;
     @Resource
     private WebServiceContext context;
     @WebMethod
     public void echo(String msg) {
          myAdapter = getMyAdapterFromSpringContext();
          myAdapter.sendInsertEvent(new MyEvent(msg));
     public MyWSAdapter getMyAdapterFromSpringContext() {
          ServletContext sc = (ServletContext) context.getMessageContext().get(MessageContext.SERVLET_CONTEXT);
          ApplicationContext springContext = WebApplicationContextUtils.getWebApplicationContext(sc);
          return (MyWSAdapter) springContext.getBean("myWSAdapter");
So far i'm getting java.lang.NoClassDefFoundError for org.springframework.web.context.support.WebApplicationContextUtils (org.springframework.spring-web_2.5.6.jar), and trying to figure out where is the jetty classpath.

Exposing RFC as a Web Service

Hello All,
I am working on a SOAP to SOAP (Backend as ECC where I am exposing an RFC as Web Service). Once the Web service is generated for RFC and the WSDL is imported in PI, I can see that all the fields in different nodes become mandatory.
Is it how normally Web Service for BAPI works or can this behaviour (mandatory / optional) be controlled ?
Also when I execute the end to end scenario via SOAP UI, I don't get any error back but also neither get the Return table nor the Sales Order NO. I am using the BAPI BAPI_SALESORDER_CREATEFROMDAT2.
Can it be because of no COMMIT (The BAPI uses external commit although this reason seems less likely as executing a RFC wo any commit atleast gives me a Sales Order no) ?
How can this call be analysed in backend ECC system ? (As I assume that messages will not be visible in SXMB_MONI as explained by the Harald's thread below. I am currently in process of getting authorization of SOAMANAGER logs but wondering how it'll help?
Thanking you in advance.
SOAP to SOAP scenario: XML messages not visible in SXMB_MONI
Cheers
KanesI

Hi,
Please see the SOAP ststud..
http://<host>:5<sys#>00/mdt/amtServlet
also you might check any error logs.
The error is because of invalid xml document. So check the validity of the xml message ie. after first mapping i.e Req mapping.
For this you can refer this -
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
See the below links
Also this blog may help you-/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
Could not post a SOAP request to the interface
Message Servlet is in Status ERROR
Error while posting messages to SOAP sender adapter SP 13
http://localhost:50000/XISOAPAdapter/HelperServlet?action=FindChannel&channel=PartyA:SOAPService:soapchannel
SOAP Adapter in PCK
Regards
Chilla..

ABAP Proxy, WEB SERVICE and RFC

Hi
I have to pull the data from XI.
I have the PDFdocument of how to integrate XI with BI.
But i am not clear what is abap proxy and web service.
Could anyone let me know basic of what is abap proxy and webservice.
Is abap proxy and webservice are present in both the systems XI&BI ?
REgards
annie

Hi,
ABAP proxy is a connection between SAP XI & BI . For all the connections need to chk in SM59, and SICF .
proxies are a replacemet for adapters whereas webservices(WSDL) are replacements for data typesYou generate proxies from an interface description in WSDL (Web Service Description Language) by using ABAP proxy generation.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46d6c25d-0b01-0010-06a9-8e8218753c02
The SOAP adapter enables you to exchange SOAP messages between remote clients or Web service servers and the Integration Server. Also you can use the axis framework with SOAP adapter. Check this help:
http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
We can Communicate between SAP System & Webservice Using Proxies. Check this weblog for some information on this:
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
ABAP Proxy -> XI -> Webservice :
pls chk this links;
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
http://www.webservicex.net/WS/WSDetails.aspx?CATID=4&WSID=59
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3022- [original link is broken] [original link is broken] [original link is broken] Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies -ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Hope this helps,
Regards
CSM Reddy

Gettinfg error in RFC to Web Service scenario

hi friends,
I am getting the following error while configuring RFC to Web Service scenario.
I have used the ws :http://webservices.imacination.com/distance/Distance.jwsPlease help me out.

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. )</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi
check this thread
Getting error in target SOAP communication channel
regards
krishna

RFC- XI- Web services

Hi All,
We are configuring RFC->XI->Web Services scenario.
We are using SOAP adapter in the receiver side. We are getting the following error message.
soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: ConversionRate. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing).
Kindly help.

Hi,
Quick checks-
1) Reciever SOAP Adapter configuration
2) Check the Target URL - it should be wsdl URL
3) Transport protocol used (HTTP)
Check this blog about SOAP Adapter Configuration carefully-
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
Regards,
Moorthy

Web Services - RFC

Similar Messages

Maybe you are looking for