Web transaction test monitor with Extracture rules and replacement parameters.

We are trying to setup a basic login test for a authentication scenario that uses OASIS Identity Server and Azure ACS Authentication.
It uses a ws security token and is returns from the identity server as a wresult.
This is passed to Windows Azure access control service (ACS) and another ws security token is passed in the wresult.
Since each test run of this login monitor requires a new token, We are trying to capture this ws security token with an extraction rule and then add it in on subsequent requests.
However when I run the test, I am not able to tell if I am extracting properly. The only time I can see the actual wresult as a fully formed xml record is when I first do the recording. When running the test after configuring the extraction
rule, I dont see any values that I expect.
Is there a way to see these extraction values or what is happening during this process? Are there any logs related to this?
Thanks Lance

You may find something in Event log or by a Network Package capturing tool.
Juke Chou
TechNet Community Support

Similar Messages

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

Hello. I need to define a mesure in a picture: I took a picture of an object with a ruler and I want to signify to photoshop "this segment = 1 cm". How to do? Thank you!

Hello. I need to define a mesure in a picture: I took a picture of an object with a ruler and I want to signify to photoshop "this segment = 1 cm". How to do? Thank you!

That's a good precaution, norm. It should be no problem is you have an object on a flat surface next to a ruler. It gets trickier in security camera frames.
Anyway that is one example. Anne can look further into the measuring tools of Photoshop Extended to see if it helps.
A note on the screen resolution thing. When I calculate the screen resolution, I go into Photoshop > Preferences > Units and Rulers
and enter it here in place of the default 72 ppi. Then when I use View > Print Size, the on-screen rulers will match a physical ruler.
That's if you wanted to look at the actual printed document size onscreen.
Gene

How do I delete my email address that is paired with my Droid and replace it with another email address? thanks!

How do I delete the email address that Veriozon Wireless rep paired with my Droid and replace it with a different address?

The easiest way would be to go to menu>settings>accounts & sync, select the account (I'm assuming you're referring to your gmail account, so select google), then press the remove account button at the bottom. You may lose all your contacts and other data associated with your google account, possibly even your apps, so be aware of this beforehand. You can then add the new account from the accounts & sync menu.
If you are willing to completely start over with your phone, another alternative would be to factory reset it (menu>settings>privacy>factory data reset). This will return your phone to an out-of-the-box condition, and you can use a different gmail address if you like.

Difference between Replacement with a query and Replacement from Variable

Hi Gurus
Would explain the difference between the Replacement Path: Replacement with a query and Replacement Path: Replacement from Variable with scenarios.
Thanks in advance,
Aravind.S

Hi,
If you are using Replacement with query, the given query output will be used as input your variable. For example if you want to display the product details, which can be find our from a query.
And Replacement with Variable will be used when you want to give the same input in two different fields. for example if you want to see the records from sending location and not the records from recived location at the same time. Here once you give the sending location id, it will be taken as the same input for received location.
Regards,
Vishnu

Editing a Web Photo Album Created With Dreamweaver CS3 and Fireworks CS3

I created a web photo album with DW CS3 and FW CS3. I want to
add and delete some of the photos in the collection. So far, the
only way I have been able to do this is to recreate the whole thing
from scratch with all the correct pictures in the target folder. Is
there an easier way?

I could be wrong (we only test Adobe widgets for the quality
of their output
code, not for features, or lack of features) but recreation,
as Patty said,
might be the only way. If you have a development budget, you
might want to
take a look at some commercial tools that would have the
features and
capabilities you want or need.
Al Sparber - PVII
http://www.projectseven.com
Fully Automated Menu Systems | Galleries | Widgets
Lightshow Magic: the new wave...
"AmateurWebMaster" <[email protected]> wrote
in message
news:g6kf6v$o1l$[email protected]..
>I created a web photo album with DW CS3 and FW CS3. I
want to add and
>delete
> some of the photos in the collection. So far, the only
way I have been
> able to
> do this is to recreate the whole thing from scratch with
all the correct
> pictures in the target folder. Is there an easier way?
>

3 Monitors with 1 iMac and 2 Cinema Displays conected to Windows Gaming PC Help!

Hi
I want to set up a 3 monitor gaming set up with 1 iMac in the middle and 2 cinema displays either side. This would be a tripple monitor set up.
I am looking to set up a new computer and i want to have 3 monitors. I also want to have an iMac so i want the iMac in the middle and two cinima displays next to each other. i Want to also conect these monitors with a Windows 7 gaming PC.
I want to hook up my very powerfull windows 7 gaming computer wich has 3 SLI GTX 560 EVGA cards. These cards have a display port output.
So i want to run 3 monitors from my gaming machine and i also want to have my iMac use the 3 monitors aswell. I also want to take advantage of the full, maximum resolution. I would get the thunderbolt cinema display monitors.
Gaming comupter has 3 display ports so i need to connect each graphics card to one of the monitors. I then need to conect the two cinema displays to the middle iMac.
I have not bought anything yet i just need to know if i can do this. Need to know stuff like what adapers to buy and what compatabilties.
I need to know if this is posible and how i would do it.
Thanks

Could i use some of these cables?
It says they are thunderbolt conpatable.
http://www.macfixit.com.au/shop/index.php?_a=viewCat&catId=229
http://www.macfixit.com.au/shop/index.php?_a=viewProd&productId=2444

Viewing on external monitor with ADVC-100 and s video

I am trying to view my canvas on a external monitor. I have a canopus ADVC-100 and i am using the firewire input and the s video as the output in the back. When I try to set it up and i select view all frames, but when i go to the video output menu it says my firewire device is missing. Any hints or tips on what i am doing wrong. I am using the s-video because the monitor only has a components input available, the RCA's are already occupied.

Is the ADVC powered? When you connect firewire to the back of the unit, it gets powered by that connector, but the firewire jack on the front is only 4-pin and doesn't support power.
If you have a 6-pin to 6-pin firewire cable, try connecting it to the back of the ADVC110 and then the front of the box should light up, indicating power.
I'm having a similar issue. I can print to tape via the Canopus box, but I want to be able to drive a monitor with it just so I can have an NTSC monitor while I'm editing. I can't seem to make it work. Any ideas?

How to use Dual monitors with G5 Mac; AND How can the image in "Develop" be made to look like wh

Two questions: How can I use my dual monitors on my G5 Mac?
How can the image in "Develop" be made to look like what it will print, just as it is
done in Photoshop with view>proof setup.

Still wondering what tool is available in LR 1.1 to "view proof"
As in Photoshop CS 3, and previous versions of PS, in view I can
choose the custom .icc profile of the printer, to view what the final
print will nearly perfectly appear like.
What tool is available in LR 1.1 to do the same?
Equipment: Mac OS 10.4.10; dual monitors; Epson Pro 9600 and SPR
2400, both dedicated to matte black ink. Color working space is
ProPhoto RGB. I stay in 16 bit.

Test Wizard with databank value and wildcard

Is it possible to use e.g. the table test with a databank value and wildcard in the Wizard?
for example:
<<username>>*
or with regular expressions?

Greetings Spike,
Unfortunately the table test and the custom object test they both do not support concatenation of a data bank variable and something else (where something else could be another data bank variable, text or numbers).
You can use the wildcard or the regular expression of a table test or a custom object test by defining the pattern to use in your data bank file.
Example:
A data bank file that contains the following information:
--------------- Begin data bank file example -----
OrderNumber
L2007*
K2006*
---------- End data bank file example -------------
Notice that the wildcard was included in the value of each data bank record.
In the table test the expression field should be "<<OrderNumber>>" (without the quotes) and the Test Type would be String and WildCard.
The same thing can be done with the regular expression option.

Has anyone used the Panasonic BT-LH2600WP monitor with Premiere CC and AJA T-TAP?

I'm considering investing in the Panasonic 26" BT-LH2600WP to use as a color correct monitor with my 27" imac and a aja T-tap (thunderbolt to sdi adapter). Has anyone done this or know if there are any quality issues?
thanks
Phil

Phil, I have a similar set up, but I have the 17-inch Panasonic SDI monitor. Premier works okay with the T-Tap, with some minor yet annoying bugs.
If I monitor audio via HDMI from the T-Tap, which I prefer, then my Panasonic monitor and its matching audio are about half a second out of sync with the iMac display. (But the HDMI audio is perfectly synced with the Panasonic SDI video.) This is annoying because both the Panasonic and the iMac are directly in front of me, and it's confusing seeing the out of sync iMac image. Definitely not something to show any clients.
If I switch my audio monitoring to "Adobe Desktop Audio," which is the feed from the iMac's headphone jack, this problem disappears. In that case, the Panasonic and the iMac display are almost perfectly matched up. However, now I'm getting lower quality audio, with added digital-to-analog processing in the signal.
Using the T-Tap is smooth and trouble free in Final Cut Pro X, but in Premier it is a bit buggy. That said, it works mostly okay.
While we're on the subject, can anyone suggest the best Preferences settings in Premier to use the AJA T-Tap? I may be missing something.
Thanks!

SABRIX/JBOSS monitoring with Solution Manager and Wily Introscope

Reading SCN discussions it is not quite clear to me if an extra (Wily) license is needed for monitoring SABRIX/JBOSS with Solution Manager and Wily Introscope. Does someone have experience in this area what exact to do?

Hi GSAP,
Please check this pdf file:
Wily Introscope a CA Product- Utility that Comes with Solution Manager Specifically for Java Monitoring
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50973df5-e1d1-2c10-cf89-c177fbfd7e65?QuickLink=index&…
Thanks
Vikram

External monitor with external mouse and keyboard. what am I doing wrong?

I got a iBook G3 with 600 MHz , 640 RAM, running 10.4.10. I bought a external keyboard, mouse and got a free ViewSonic Monitor from school so I hoped that I would be able to use all of these while the lid of my computer was closed. I close it, wait a few seconds, press random keys on my external keyboard to wake it up and it at first appears that it works but then it just goes back to sleep after about 1 min at the most. If you could help me I'd appreciate it. THANKS!!!!

You aren't doing anything wrong; the iBook is supposed to sleep whenever you close it. It's designed to work that way, ostensibly so that it won't overheat.
Apple's word on the matter can be found in this Apple Knowledge Base article:
http://docs.info.apple.com/article.html?artnum=88199
Others have addressed the problem by simply darkening the display with the F1 key and leaving the iBook open an inch or so.

How to use Dual monitors with G5 Mac; And... How can the image in "Develop" be made to look like

Two questions: How can I use my dual monitors on my G5 Mac?
How can the image in "Develop" be made to look like what it will print, just as it is
done in Photoshop with view>proof setup.

Patience! :)
(This was asked and answered in previous thread.)

Web transaction test monitor with Extracture rules and replacement parameters.

Similar Messages

Maybe you are looking for