Webcache origin server auto up and down

hi all,
I've configure 2 node and try to perform load balance within each other. i notice from origin server statistic, each of the 2 node keep on restarting by itself. The node alive with the longest time, the load balance will transfer the connection the the node until the node disconnected.
how can i disable the node by restart itself? i want to force 80% of the connection to node 2.
thank you

Hi,
Web Cache doesn't restart itself without a reason. Please try to check why this is happening. Check logs in $OH/opmn/logs
Regards,
Martin

Similar Messages

Screen moving up and down in remote desktop

Hi!
I'm having this trouble since months ago. I conect to a server from desktop remote and everything works fine, until I minimize the remote desktop, I do some things on my local PC and I go back to my remote desktop, when I maximize, most of the times the
whole screen(only the server) moves up and down and doesn´t allow me to do anything. Later stop doing that and I can work perfectly.
I had tried to close and open it again, change de screen resolution, and it doesn´t work that either.
I would really apreciate if somebody can help me to solve this! thanks!

Hi,
Firstly, please let us know the OS version of your local system and remote system.
Meanwhile, what do you mean that the screen moves up and down? Would you please provide us screenshots.
Thanks.
Jeremy Wu
TechNet Community Support

Firefox drop down not allowing page redirect is preventing me from auto running and installing software

When I try to install software, Firefox window opens with a drop down box stating Firefox is not allowing page to re-direct. I click on allow, and it goes back to original page. It is preventing me from auto run and installing software. I tried several times, and it just runs me in circles. When I click to allow page re-direct, I click auto run and it send me right back to Firefox page with same thing. Very frustrating.

When do you get this redirect?
Is that when you (try to) visit other websites?
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You can look for suspicious extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Programaticaly remove(disable/enable) origin server from WebCache Cluster

Hi.
Can I programaticaly disable/enable origin server (OAS) from WebCache Cluster for safe node Up/Down ?
Thanks.

I found only one way - simulate HTTP request from web console by wget.
wc_balance.bat (windows script):
@rem Using a script: parameter ON - enable node, OFF - disable node
@rem server env
set HOST=class4.tst.lan:4000
set AUTH=ias_admin:system
@rem req env
set u_host=class4.tst.lan
set u_port=7888
set u_capacity=100
set u_numRetry=5
set u_url=/
set u_interval=10
@rem !!! line number server in the Origin Server !!!
set u_id=h2
set U1="hostname=%u_host%&port=%u_port%&routing=%1&capacity=%u_capacity%&numRetry=%u_numRetry%&URL=%u_url%&interval=%u_interval%&SSL_TYPE=NONE&ACTION=Submit&id=%u_id%&SCREEN_ID=CGA.Site.OriginServers_Edit"
set U2="webcacheadmin?SCREEN_ID=CGA.ConfigTree&ACTION=Apply+Changes"
@rem set new status
wget http://%AUTH%@%HOST%/webcacheadmin?%U1%
@rem commit changes
wget http://%AUTH%@%HOST%/webcacheadmin?%U2%
Message was edited by:
sisaev

Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

LMS 3.2 and window server 2008 standard, get error when we try
Khi truy nhập vào menu chức năng:
License Server/Daemon Manager is down. Please check license.log for more information.
access licensing:
Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
Lincense.txt is file log of LMS
Must I have to active window server 2008 first ?
thank you very much ?

Hi ,
--Add the Casuser to the Administrator Group
and then reset the casuser password:
1. Go to CSCOpx\setup\support> and run the following command:
resetCasuser.exe
2. Restart the daemon manager:
Net stop crmdmgtd
Net start crmdmgtd
Let me know how it works
If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
--also screen shot of the below directory :
NMSROOT\etc\license
Thanks
Afroj

Auto-Deployment and Restarting Managed Server

Hi,
We are using WebLogic Server 7.0 SP2 on Solaris 8. Yesterday, a developer copied
over a new WAR file into the applications directory. Then he ried to restart the
managed server. This appeared to hang, so he tried restarting the admin. server,
which also failed. Looking at the log, it looks like the admin. server is trying
to deploy apps. from the applications/backup directory.
After I removed the backup directory and edited config.xml to remove all references
to this directory, I was able to startup the Admin. server (though there were
still some errors; see later) and the managed server.
The servers are actually running in "developemnt" mode and have the Aut-Deploy
feature enabled, so my theory is that the auto-deployment was conflicting with
the managed server restart. He shouldn't have had to restart the managed server
since Auto-Deploy is enabled, right?
I'm also wondering about these errors I got when I the Admin. server finally started:
Starting WebLogic Server...
<May 4, 2004 11:41:04 AM MDT> <Notice> <Management> <140005> <Loading configuration
/wlsapp/prod/ivrprod/./config.xml>
<May 4, 2004 11:41:14 AM MDT> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 4, 2004 11:41:14 AM MDT> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "admin" for domain "ivrprod">
<May 4, 2004 11:41:44 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir>
<May 4, 2004 11:41:49 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Running>
<May 4, 2004 11:41:51 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Completed>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Management> <141052> <Application Poller
started for development server.>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir-0>
<May 4, 2004 11:41:57 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:41:59 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
<May 4, 2004 11:42:13 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=2268781,name=InternetTroubleshooting,context-path=/backup/
InternetTroubleshooting)] failed to compile /dialogs/ADSLDisambig.jsp, compiler
errors:
/wlsapp/prod/ivrprod/./admin/.wlnotdelete/_appsdir_backup_dir_InternetTroubleshooting_2268781/jsp_servlet/_dialogs/__ADSLDisambig.ja
va:17: package com.nuance.ps.telus does not exist
<May 4, 2004 11:42:20 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=1642582,name=ReportAPayment,context-path=/backup/ReportAPa
yment)] translation of /dialogs/GetStatus.jsp failed: weblogic.servlet.jsp.JspException:
(line 7): class 'com.nuance.ps.telus.Shared
Storage' could not be loaded>
<May 4, 2004 11:42:20 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:22 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=3439810,name=TelusLogin,context-path=/backup/TelusLogin)]
translation of /conf/ClearOldKeys.jsp failed: weblogic.servlet.jsp.JspException:
(line 2): class 'com.nuance.ps.telus.SharedStorage'
could not be loaded>
<May 4, 2004 11:42:22 AM MDT> <Error> <Deployer> <149201> <The Slave Deployer
failed to complete the deployment task with id 16 for
the application appsdirbackup_dir.
weblogic.management.ApplicationException: Prepare failed. Task Id = 16
Thanks,
Paul

The short answer to your question is that auto-deployment and multiple
servers don't mix.
If you have a single-server domain and choose to use auto-deployment,
that'll work fine.
Once you have separate admin/managed servers, you need to use
weblogic.Deployer, the wldeploy ant task (8.1), or the console to deploy
applications.
-- Rob
Paul wrote:
Hi,
We are using WebLogic Server 7.0 SP2 on Solaris 8. Yesterday, a developer copied
over a new WAR file into the applications directory. Then he ried to restart the
managed server. This appeared to hang, so he tried restarting the admin. server,
which also failed. Looking at the log, it looks like the admin. server is trying
to deploy apps. from the applications/backup directory.
After I removed the backup directory and edited config.xml to remove all references
to this directory, I was able to startup the Admin. server (though there were
still some errors; see later) and the managed server.
The servers are actually running in "developemnt" mode and have the Aut-Deploy
feature enabled, so my theory is that the auto-deployment was conflicting with
the managed server restart. He shouldn't have had to restart the managed server
since Auto-Deploy is enabled, right?
I'm also wondering about these errors I got when I the Admin. server finally started:
Starting WebLogic Server...
<May 4, 2004 11:41:04 AM MDT> <Notice> <Management> <140005> <Loading configuration
/wlsapp/prod/ivrprod/./config.xml>
<May 4, 2004 11:41:14 AM MDT> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 4, 2004 11:41:14 AM MDT> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "admin" for domain "ivrprod">
<May 4, 2004 11:41:44 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir>
<May 4, 2004 11:41:49 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Running>
<May 4, 2004 11:41:51 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir on admin - Completed>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Management> <141052> <Application Poller
started for development server.>
<May 4, 2004 11:41:54 AM MDT> <Notice> <Application Poller> <149400> <Activating
application: appsdirbackup_dir-0>
<May 4, 2004 11:41:57 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:41:59 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<May 4, 2004 11:42:02 AM MDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
<May 4, 2004 11:42:13 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=2268781,name=InternetTroubleshooting,context-path=/backup/
InternetTroubleshooting)] failed to compile /dialogs/ADSLDisambig.jsp, compiler
errors:
/wlsapp/prod/ivrprod/./admin/.wlnotdelete/_appsdir_backup_dir_InternetTroubleshooting_2268781/jsp_servlet/_dialogs/__ADSLDisambig.ja
va:17: package com.nuance.ps.telus does not exist
<May 4, 2004 11:42:20 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=1642582,name=ReportAPayment,context-path=/backup/ReportAPa
yment)] translation of /dialogs/GetStatus.jsp failed: weblogic.servlet.jsp.JspException:
(line 7): class 'com.nuance.ps.telus.Shared
Storage' could not be loaded>
<May 4, 2004 11:42:20 AM MDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbackup_dir-0 on admin - Running>
<May 4, 2004 11:42:22 AM MDT> <Error> <HTTP> <101045> <[ServletContext(id=3439810,name=TelusLogin,context-path=/backup/TelusLogin)]
translation of /conf/ClearOldKeys.jsp failed: weblogic.servlet.jsp.JspException:
(line 2): class 'com.nuance.ps.telus.SharedStorage'
could not be loaded>
<May 4, 2004 11:42:22 AM MDT> <Error> <Deployer> <149201> <The Slave Deployer
failed to complete the deployment task with id 16 for
the application appsdirbackup_dir.
weblogic.management.ApplicationException: Prepare failed. Task Id = 16
Thanks,
Paul

Put some data form the databse of SQL Server into SAP and auto general PR?

Dear all,
Can you tell me how I can put some data from the databse of SQL Server into SAP and auto general PR?
Best regards,
Merryzhang
Edited by: merry zhang on Feb 4, 2009 9:10 AM

Hi Zhang,
If i have understood your question properly, I guess you wanted to create Purchase Requistion automatically right?
Then you have lots of option simpilest one would be create a couple of Z table with all the fields that you require for header and Item.
create a Program and use BAPI function module to create the PR by reading the values from those Z tables. after creation delete the contents from the table. Schedule this program in Background periodically like everyday or weekly once however you would like it to be. So once the table has contents in it and when the program runs it will create the PR's (Purchase Requisition).
You can also use a workflow with the Z table. Once the Z table is filled you can trigger a workflow based on the Table change. I'm not sure like how to do it but I nkow that this process can also be used.
Hope this might have thrown some light upon.
Thanks,
Prashanth

Address bar suggestion drop down no longer accepts a left click to auto complete and goto url, instead left click is forcing a generic search.

Using firefox 31.0, following update I seem to no longer be able to left click a suggested url for it to auto-complete and GOTO...
I am happy to recheck all about:config again, as part of getting to the route of this "issue", ..
In fact I will try anything, I have tried a fresh install of firefox, this has not worked, however the "feature" I am trying to describe still works under safe mode, which means I think that there has to be something that is incorrect in my config.
Thank you all in advance for any pointers tips... and possible resolve offered.

Hi ScoobTheNoob,
I am bad a rhyming, but Safe Mode essentially only disables add ons. I would disable them one by one to find the culprit.

Hard drive constantly spinning up and down when asleep

Hi all,
I have a problem with an external USB 2.0 hard drive connected to my Mac mini (late 2012).
When I put the computer to sleep the drive spins up to speed, stops, then immediately starts to spin up again. This goes on and on.
I understand that drives will periodically spin up when asleep for spotlight indexing etc. However this seems like strange behaviour, it just repeats spinning up and down in an endless cycle.
I have had the drive for a while now, as my time machine backup. Interestingly this problem only started after I rearranged my desk when I set up a second monitor. I have a USB 3.0 drive (my scratch disk) that behaves normally.
I have drives set to not sleep in preferences.
I have searched around but can only find posts about people not wanting to wait for drives to spin up when they open finder etc.
What do you think? Could the drive be on its way out? It is a Samsung spinpoint f3 1tb in an Iomega enclosure, for information...
I appreciate any help,
Cheers,
Mike

Hi BDAqua,
I should have noticed this earlier but it appears the problem is with the mini waking from sleep and thus causing the drives to wake.
When I put the mini top sleep (without the external drives powered on) it constantly wakes and sleeps. The displays dont come back on (untiul you click the mouse or hit a key etc.) but you can hear the internal drive spin up and the sleep light comes on, then goes back to blinking until it wakes again.
I have realised that it must be due to the second monitor that I have connected via the mini display port. It is connected using a mini display port to hdmi cable I bought from play.com. Something to do with the display and thunderbolt is casuing the sleep function to misbehave, I think.
Here is the console log that was created after sleeping the mini, allowing it to go through its weird sleep/wake cycle then fully waking it up again.
Hope that makes sense, it is late and I am tired!
Thanks for all your help.
Mike
21/05/2013 23:30:16.840 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
21/05/2013 23:30:16.000 kernel[0]: HID tickle 43809 ms
21/05/2013 23:30:18.747 WindowServer[93]: Created shield window 0xc1 for display 0x003f003f
21/05/2013 23:30:18.747 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:18.752 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:18.766 WindowServer[93]: Created shield window 0xc2 for display 0x003f003d
21/05/2013 23:30:18.766 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:18.784 airportd[1018]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:30:19.169 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:19.206 loginwindow[42]: resume called when there was already a timer
21/05/2013 23:30:19.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:30:58.348 com.apple.backupd-helper[1028]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.
21/05/2013 23:31:02.141 WindowServer[93]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
21/05/2013 23:31:02.142 loginwindow[42]: CGSGetWindowTags: Invalid window 0xffffffff
21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
21/05/2013 23:31:02.142 loginwindow[42]: CGSSetWindowTags: Invalid window 0xffffffff
21/05/2013 23:31:02.307 WindowServer[93]: Created shield window 0xc8 for display 0x78c8d2fe
21/05/2013 23:31:02.311 WindowServer[93]: Created shield window 0xc9 for display 0x78c8d1b0
21/05/2013 23:31:02.311 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
21/05/2013 23:31:02.352 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:02.352 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:02.370 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
21/05/2013 23:31:02.389 WindowServer[93]: device_generate_lock_screen_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
21/05/2013 23:31:02.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
21/05/2013 23:31:04.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:04.000 kernel[0]: LE is supported - Disable LE meta event
21/05/2013 23:31:04.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
21/05/2013 23:31:04.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
21/05/2013 23:31:04.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:04.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
21/05/2013 23:31:04.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
21/05/2013 23:31:10.000 kernel[0]: TBT W (2): 0x0010 [√]
21/05/2013 23:31:10.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
21/05/2013 23:31:10.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
21/05/2013 23:31:10.000 kernel[0]: Previous Sleep Cause: 5
21/05/2013 23:31:10.000 kernel[0]: en1: 802.11d country code set to 'X3'.
21/05/2013 23:31:10.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:10.965 configd[18]: network changed: v4(en0-:192.168.1.190, en1-:192.168.1.47) DNS- Proxy- SMB
21/05/2013 23:31:11.549 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:11.632 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:11.000 kernel[0]: en1: 802.11d country code set to 'US'.
21/05/2013 23:31:11.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
21/05/2013 23:31:11.000 kernel[0]: MacAuthEvent en1 Auth result for: 10:bf:48:3e:02:74 MAC AUTH succeeded
21/05/2013 23:31:11.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
21/05/2013 23:31:11.000 kernel[0]: AirPort: Link Up on en1
21/05/2013 23:31:11.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:11.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:12.000 kernel[0]: en1: 802.11d country code set to 'GB'.
21/05/2013 23:31:12.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
21/05/2013 23:31:12.000 kernel[0]: Graphics suppressed 2116 ms
21/05/2013 23:31:12.000 kernel[0]: AirPort: RSN handshake complete on en1
21/05/2013 23:31:12.454 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
21/05/2013 23:31:12.466 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
21/05/2013 23:31:12.470 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
21/05/2013 23:31:12.895 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:12.915 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:13.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
21/05/2013 23:31:14.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,c5e1,3800]
21/05/2013 23:31:14.757 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
21/05/2013 23:31:14.776 mDNSResponder[39]: 78: Could not write data to clientPID[-1]() because of error - aborting connection
21/05/2013 23:31:14.779 mDNSResponder[39]: 78: DNSServiceGetAddrInfo v4v6 39-courier.push.apple.com. PID[-1]()
21/05/2013 23:31:15.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:16.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:17.426 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:17.426 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:17.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
21/05/2013 23:31:17.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:17.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
21/05/2013 23:31:17.000 kernel[0]: LE is supported - Disable LE meta event
21/05/2013 23:31:17.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
21/05/2013 23:31:17.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:17.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
21/05/2013 23:31:24.000 kernel[0]: TBT W (2): 0x0010 [√]
21/05/2013 23:31:24.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
21/05/2013 23:31:24.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
21/05/2013 23:31:24.000 kernel[0]: Previous Sleep Cause: 5
21/05/2013 23:31:24.006 configd[18]: network changed: v4(en0:192.168.1.190, en1-:192.168.1.47) DNS* Proxy SMB
21/05/2013 23:31:24.010 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.47)
21/05/2013 23:31:24.973 configd[18]: network changed: v4(en0-:192.168.1.190) DNS- Proxy- SMB
21/05/2013 23:31:24.978 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en0 (192.168.1.190)
21/05/2013 23:31:25.269 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:25.277 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:26.000 kernel[0]: MacAuthEvent en1 Auth result for: 10:bf:48:3e:02:74 MAC AUTH succeeded
21/05/2013 23:31:26.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
21/05/2013 23:31:26.000 kernel[0]: AirPort: Link Up on en1
21/05/2013 23:31:26.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:26.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:26.000 kernel[0]: Graphics suppressed 2278 ms
21/05/2013 23:31:26.000 kernel[0]: AirPort: RSN handshake complete on en1
21/05/2013 23:31:26.580 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:22C9:D0FF:FE8F:B1EB)
21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (192.168.1.47)
21/05/2013 23:31:26.590 configd[18]: setting hostname to "mikemini"
21/05/2013 23:31:26.592 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
21/05/2013 23:31:26.596 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
21/05/2013 23:31:27.016 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:27.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
21/05/2013 23:31:28.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,c5e1,3800]
21/05/2013 23:31:28.797 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:AA20:66FF:FE11:3086)
21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.190)
21/05/2013 23:31:28.816 mDNSResponder[39]: 78: Could not write data to clientPID[-1]() because of error - aborting connection
21/05/2013 23:31:28.819 mDNSResponder[39]: 78: DNSServiceGetAddrInfo v4v6 13-courier.push.apple.com. PID[-1]()
21/05/2013 23:31:28.835 configd[18]: setting hostname to "MikeMini.local"
21/05/2013 23:31:30.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:31.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:33.745 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
21/05/2013 23:31:33.000 kernel[0]: HID tickle 9738 ms
21/05/2013 23:31:35.674 WindowServer[93]: Created shield window 0xca for display 0x003f003f
21/05/2013 23:31:35.674 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:35.679 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:35.700 WindowServer[93]: Created shield window 0xcb for display 0x003f003d
21/05/2013 23:31:35.701 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:35.712 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:36.104 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:36.129 loginwindow[42]: resume called when there was already a timer
21/05/2013 23:31:36.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:36.896 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
21/05/2013 23:31:36.897 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
21/05/2013 23:31:37.669 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
21/05/2013 23:31:37.683 WindowServer[93]: Created shield window 0xcc for display 0x78c8d1b0
21/05/2013 23:31:37.683 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x3f003d
21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x78c8d2fe
21/05/2013 23:31:39.009 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
21/05/2013 23:31:39.026 WindowServer[93]: Created shield window 0xcd for display 0x78c8d1b0
21/05/2013 23:31:39.026 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003d
21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003e
21/05/2013 23:31:39.051 WindowServer[93]: Created shield window 0xce for display 0x78c8d2fe
21/05/2013 23:31:39.051 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:39.490 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.490 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.490 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
21/05/2013 23:31:39.491 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
21/05/2013 23:31:39.491 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.491 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.685 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:39.713 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.714 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.805 WindowServer[93]: Created shield window 0xcf for display 0x78c8d1b0
21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd0 for display 0x003f003d
21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd1 for display 0x003f003f
21/05/2013 23:31:39.811 WindowServer[93]: Created shield window 0xd2 for display 0x78c8d2fe
21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
21/05/2013 23:31:39.842 WindowServer[93]: Display added
21/05/2013 23:31:39.842 WindowServer[93]: Display removed
21/05/2013 23:31:39.875 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.876 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
21/05/2013 23:31:39.883 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d2fe device: 0x10646ea10 isBackBuffered: 1 numComp: 3 numDisp: 3
21/05/2013 23:31:39.892 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d1b0 device: 0x10646e110 isBackBuffered: 1 numComp: 3 numDisp: 3
21/05/2013 23:31:41.029 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.062 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.088 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.089 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.103 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.104 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.843 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.846 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:32:20.130 com.apple.backupd-helper[1043]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.

Origin server recovery after failover not working

version of oracle web cache - webcache9.0.2.0.0_WINDOWS_OWM.zip
patch set applied - p2885472_9022_WINNT
firstly architecture is as follows:
- 1 x Standalone OWC
- 2 x Origin Web Servers (Standalone OC4J)
- OWC configured with single site mapped to two origin servers (load-balancing and failover)
- only http at this point in time
behaviour i experience is the following:
1.. 2 origin servers (A + B) running, owc balancing the load
2.. origin web server A is shut down
3. owc reports origin web server A to be down on first failed request
4. all sessions fail-over instantly to origin server B
5. origin web server A is started again
6. within 5 seconds owc reports origin web server A to be UP
7. ****problem**** all requests (even new clients) are forwarded to origin web server B, origin web server A never receives a request again (I've waited more than 10 mins)
- to restore normal load balancing behaviour i need to restart owc
-already checked event log in verbose mode and no errors reported

Hi Venkat,
In the site-to-server mapping page, make sure that you are matching one Web cache with 2 origin servers in a single entry.
If possible, I urge you to patch Web Cache up to 9.0.2.3. There has been some bug fixes in 9.0.2.0 regarding load balancing. To obtain a patch, you need to contact Oracle Support.
Thanks!

Would a 347 MB file be slow? Auto save and auto type turn off?

I am doing an art inventory and add jpegs of the art. I don't resize them they range from 750k to 3MB. I guess if it is slowing the program down i should? It currently is 267 rows by about 18 columns.
Thanks in advance.
Oh can I turn off auto save and auto type? That may help. How do I do that?

Done.
Enter Scrip Editor
paste the posted script
File > Save > as Script on the Desktop
Move the script to the folder :
Macintosh HD:Library:Scripts:Folder Action Scripts:
CAUTION, you will be asked to enter your pasword.
Create a folder to do the job. I named mine Normalized. I created mine on the Desktop where it's easy to reach.
Go to :
Macintosh HD:Library:Scripts:Folder Actions:
Double click the alias : Configure Folder Actions
Below the left column, click
navigate to select your new folder
Below the right column, click
select the script image - normalize400.scpt
After that, drag and drop a picture file onto your folder.
The original will be move in the folder Originals (isn’t it original ?)
and a reduced copy 400 x height will be stored in the folder Normalized images.
And now, here is the script :
--{code}
Image - Normalize
This Folder Action handler is triggered whenever items are added to the attached folder.
The script rotates the image counter-clockwise (left).
Copyright © 2002–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
modified by Yvan KOENIG (VALLAURIS, France)
2011/12/08
This version normalize pictures so that
(1) the greater dimension become the width one (rotate left if needed)
(2) this greater dimension is ruled by the property maxWidth defined below.
property maxWidth : 400
-- set it to fit your needs
property done_foldername : "Normalized Images"
property originals_foldername : "Original Images"
property newimage_extension : "jpg"
-- the list of file types which will be processed
-- eg: {"PICT", "JPEG", "TIFF", "GIFf"}
property type_list : {"TIFF", "GIFf", "PNGf", "PICT", "JPEG"}
-- since file types are optional in Mac OS X,
-- check the name extension if there is no file type
-- NOTE: do not use periods (.) with the items in the name extensions list
-- eg: {"txt", "text", "jpg", "jpeg"}, NOT: {".txt", ".text", ".jpg", ".jpeg"}
property extension_list : {"tif", "tiff", "gif", "png", "pict", "pct", "jpeg", "jpg"}
on adding folder items to this_folder after receiving these_items
 tell application "Finder"
 if not (exists folder done_foldername of this_folder) then
make new folder at this_folder with properties {name:done_foldername}
 end if
 set the results_folder to (folder done_foldername of this_folder) as alias
 if not (exists folder originals_foldername of this_folder) then
make new folder at this_folder with properties {name:originals_foldername}
 set current view of container window of this_folder to list view
 end if
 set the originals_folder to folder originals_foldername of this_folder
 end tell
 try
 repeat with i from 1 to number of items in these_items
 set this_item to item i of these_items
 set the item_info to the info for this_item
 if (alias of the item_info is false and the file type of the item_info is in the type_list) or (the name extension of the item_info is in the extension_list) then
 tell application "Finder"
--set name of this_item to "YK#" & (text -4 thru -1 of ("0000" & i))
 my resolve_conflicts(this_item, originals_folder, "")
 set the new_name to my resolve_conflicts(this_item, results_folder, newimage_extension)
 set the source_file to (move this_item to the originals_folder with replacing) as alias
 end tell
process_item(source_file, new_name, results_folder)
 end if
 end repeat
 on error error_message number error_number
 if the error_number is not -128 then
 tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
 end tell
 end if
 end try
end adding folder items to
on resolve_conflicts(this_item, target_folder, new_extension)
 tell application "Finder"
 set the file_name to the name of this_item
 set file_extension to the name extension of this_item
 if the file_extension is "" then
 set the trimmed_name to the file_name
 else
 set the trimmed_name to text 1 thru -((length of file_extension) + 2) of the file_name
 end if
 if the new_extension is "" then
 set target_name to file_name
 set target_extension to file_extension
 else
 set target_extension to new_extension
 set target_name to (the trimmed_name & "." & target_extension) as string
 end if
 if (exists document file target_name of target_folder) then
 set the name_increment to 1
 repeat
 set the new_name to (the trimmed_name & "." & (name_increment as string) & "." & target_extension) as string
 if not (exists document file new_name of the target_folder) then
-- rename to conflicting file
 set the name of document file target_name of the target_folder to the new_name
 exit repeat
 else
 set the name_increment to the name_increment + 1
 end if
 end repeat
 end if
 end tell
 return the target_name
end resolve_conflicts
-- this sub-routine processes files
on process_item(source_file, new_name, results_folder)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
 try
-- the target path is the destination folder and the new file name
 set the target_path to ((results_folder as string) & new_name) as string
 with timeout of 900 seconds
 tell application "Image Events"
launch -- always use with Folder Actions
 set this_image to open file (source_file as string)
 set {oldW, oldH} to dimensions of this_image
 if oldH > oldW then
 set {oldW, oldH} to {oldH, oldW}
rotate this_image to angle 270.0
 end if
 set |échelle| to maxWidth / oldW
 if |échelle| < 1 then scale this_image by factor |échelle|
save this_image as JPEG in file target_path with icon
close this_image
 end tell
 end timeout
 on error error_message
 tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
 end tell
 end try
end process_item
--{code}
Yvan KOENIG (VALLAURIS, France) jeudi 8 décembre 2011 21:25:33
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Auto Levels and other adjustments

Just a small question..will auto levels and other adjustments degrade a photo quality. I most of the times use auto levels before developing a photo and I want to make sure that I keep the same quality of the original image after using adjustments.
Thanks in advance.

If you have limited skills-two schools of thought. Quality will be better if you fine tune- if you put in a little more time-learn full Photoshop, but not everyone has the time-interest or capibilities.
1) If U R only WANT to make basic changes--check out the IMAGE drop-down in PS. You can auto adjust -Color-Tone and Contrast by just clicking on the drop-down.
Are you asking this Q in order becaus you have limited time put into your images? If so, then your capibilities should drive your actions. Go auto but know with digital photography, anyone can take a great shot.
2) If you want to do more with your phontography, learn more about Photoshop CS. 8 months ago-I thought I understood PS. Then I got serious about it. The difference is stunning
Bottom line-you will learn more by trial and error-reading-online info and video. There is a great deal of info out there.
With the advent of digital photogrphy-even rookies can come up with amazing images. Dont short change yourself by being lazy-or just going "auto-all." Make your photos shine
Take your best shot--invest more time-in Photoshop. There is magic out there. Find it
Good luck

WXE-14046 Origin server response is being throttled

Hi,
We're experiencing problems when downloading files; sometimes the downloads are retrieved quickly, sometimes slowly.
In IE it's always slow, in FF or Chrome it tends to vary.
Our setup is: webcache -> http-server -> weblogic.
The downloaded files are not cached by webcache.
It's a local setup, so files are downloaded over LAN and when quick, an 8mb file s retrieved in a second.
When slow a download comes in at 100kb/s, and it seems to come in at 1mb bursts every 10 sec.
When the webcache is bypassed, and we download from the httpserver or weblogic directly, there's never a slowdown.
So it seems webcache is interfering somehow.
I've set the event log to debug mode, and the only difference between a quick and a slow download is this line.
[2011-02-02T15:18:35+01:00] [webcache] [TRACE:32] [WXE-14046] [backend] [ecid: 653466200783,0:1] Origin server response is being throttled.
Does anyone have some info on what's going on here and if/how it can be disabled ?
I can't find any info on this feature anywhere other than this page where something similar is mentioned:
http://www.oracle.com/technetwork/middleware/ias/index-089317.html
NB the version in use is 11.1.1.3.0.
Cheers,
Hans Rabouw

Read bug 11671195 or Note 1306856.1 on Metalink.
Caveat --- while the workarounds may alleviate some of the performance issues to some degree, they do not fix the problem. Despite extensive configuration and testing (including the "workarounds"), we have been unable to match the performance of WebCache 10g, especially with large file downloads.

Touchpad no longer scrolls up and down on Satellite A

So my HD crashed and i have to completely install Windows and all the Toshiba stuff with it a new.
All is well - except for one thing, my touchpad no longer scrolls up and down using the side of it in IE or Chrome, but it still works in SeaMonkey.
My Computer technician tells me it's an issue with getting some new driver for the touchpad, and i think i had to do that already about a year ago when i still had my original HD running.
So i went to the Toshiba.ch website and tried to find something.
I found all their "verfication" stuff and got inside the system and it instantly returned about 45 drivers by the looks of my "un"-driving eyeys they all could have been for whatever, so i searched especially for "touch pad" and yes, there was one for my Synapsis touchpad and XP as well, so i downloaded it - or i should say i opened it in Win Zip and checked first on the "readme file - wow, that was some Portugese in there, and that's when i kind of begun to feel lost.
I check in at Toshiba.ch, get a ton of drivers in my face i have no clue whether i am supposed to download them all or what, and when i finally pick what i think i need the whole thing seems to be in Portugese, what the crickey in the afternoon is this???
Anyway, before i download and try to install stuff i have no clue about i was hoping someone would actually give me a better hint on what i have to do exactly to get my touchpad to scroll up and down again also in Chrome, IE and where ever else.
I use Service Pack 3 on Win XP Pro and was told that's maybe why the old original driver for this laptop needs to be updated, but which file, where to get it, and how to properly install it please anyone???

Thanks for that, you confirm what i actually found out myself in the meantime.
The way i got this issue solved was that i first tried to download and install the Synaptics driver from the Toshiba site - that simply failed miserably, glad with no negative side effects at least.
Nesxt i used what unfortunately is way easier that sites like the Toshiba overload, i used Google to simply find the Synaptics website and instantly got the link to their driver download - eh voila, that actually gave me a .exe file, not an endless array of zipped files like the stuff on the Toshiba site in endless language versions!!!
This worked, tested everything out alread since a while.
- Which now leaves me with the question about the second driver you mentioned,
Alps Electric
what is that one needed for??
I have not seen this name on my lappy before, so totally unsure about whether it still needs this dispite things are working everywhere, i did not even have to go into the Device Settings of the Mouse / touchpad to change or rearrange anything in there after the direct download from Synapsis, but well informed is always best, so if you could let me know about that
Alps thing would appreciate...

Sun Web Server Reverse Proxy and Weblogic HTTP to HTTPS redirection

Hi,
I am currently testing reverse-proxy from SJSW 7.0 update 5 to Weblogic server but I have encountered an issue.
I have configured a context root to be forwarded to weblogic:
Web Server: www.server.com
URI: /path
Reverse Proxy URL: wlserver:9000
When I access https://www.server.com/path, I am getting the correct page. The issue is, the weblogic server is configured to redirect HTTP access to HTTPS, i.e., when I access http://www.server.com/path, it should be redirected to https://www.server.com/path. However, that is not the case. What happens is that I am being redirected instead to https://www.server.com/.
If I don't use reverse proxy, that is, if I use the libproxy.so from weblogic, I get the correct redirection.
Would appreciate it very much if someone can help me troubleshoot this issue.
Thanks in advance!
Edited by: agent_orange on Jul 29, 2010 2:30 AM
Edited by: agent_orange on Jul 29, 2010 2:31 AM

I am not sure, how you have configured your reverse proxy since you didn't attach / refer your current configuration file. this is how I would do it..
- create a new configuration (using web server 7 admin gui , within configuration wizard, disable java option if you plan to use web server 7 only for reverse proxy)
- select this new configuration and go to reverse proxy and try to reverse proxy / to the origin server.
that is all it should need.
your obj.conf or <hostname>-obj.conf depending on your configuration should look like following snippet
<Object name="default">
AuthTrans..
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</object>
<Object name="reverse-proxy-/">
Route fn=....
Service ..
</Object>
this is all you should need..
However, if you wanted to add complexity to your configuration, you could do some thing like
<Object name="default">
Auth..
<If defined $security>
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</If>
</Object>
<Object name="reverse-proxy-/">
Route...
</Object>

Webcache origin server auto up and down

Similar Messages

Maybe you are looking for