WebCats - Only 4 characters of first column in search help get transferred

Hi Henning,
I hope you can help me -
When I select a search help for an input field (Operation) which is a second field in search help, the system is not tranferring the selected object into the time sheet, instead it transfer first 4 characters of very first column (Network). I also checked related OSS Notes: 359620 / 357001 / 355690 / 369056 on my system and all seems to be applied long back.
We are on SAP vers 6.2.
Please advise.
Regards.
Pras Durafe

Hi Darren,
I have branched your message into a new topic because it didn't belong to the topic of the old thread. Please provide the exact patchlevel of your ITS 6.20.
Best regards,
Henning.

Similar Messages

Pa30 to view only a selected infotype and still use search help prem

Is it possible to use PA30 to have non-hr users see a custom infotype but none of the other standard infotypes? I would like for the non-hr users to be able to use the Search Help PREM to find records for the custom infotype.
Is this type of inquiry better served by creating a custom program?

These type of requirements are served at the security level but instead going into so much complexity, it is a better idea to write a custom report for the requirement.
Regards,
Amit
Reward all helpful replies.

Additional columns in customer search help

Need to add 5 additional fields in customer search help. The problem is i have to fetch data from ADR2 (active telephone and mobile number) ADR6 active email id. In table condition i have mentioned kna1-adrnr = adr2-adrnr, kna1-adrnr = adr6-adrnr.
So the search help is displaying only the record which is having adrnr number in adr2 and adr6. but the client wnat to display all the kunnr irrespective whether they are having mail id or telephone number. How to achieve it???
Is it is possible to add columns thru search help exist.
regards
Mullai

Create a copy of VTBAA and append your fields...

How to add one column in existing search help.

Hi Folks,
My quesion is
How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
Shivam

Hi,
If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
I think this should help you to certain extent.
Regards,
Kranthi
Edited by: Kranthi on Jan 14, 2010 11:15 AM

Search help overwrite a read-only field

Hi, I have some problems with search help and hope someone can help me.
My search helps (either standards or customs) work perfectly, but a strange behaviour
occur on Read-Only fields. If I open the Search Help popup and select a value, it overwrite the
READ-ONLY value !!!!!
Hope you can help.

Depending on the support pack level you are on - search helps - freely programmed or otherwise don't seem to trigger off read only fields (I noticed this when we moved to NW7.01)
I've got around this by making the field a link to action - providing the read only link I want as the text, and then calling the following code:
call method cl_wdr_value_help_handler=>handle_application_def_vh
    exporting
      context_element      = context_element
      component_usage_name = 'JOB_SELECTION'
      context_attribute    = 'JOB'.
Where component 'JOB_SELECTION' is my freely programmed value help - implementing WD interface IWD_VALUE_HELP.
This was helpful as I wanted the search help to trigger and the user to be able to update the field but only by using the search help - I didn't want the user to be able to write anything in the field.
it was a particular use case I had - it may or may not fit your needs.
Cheers, Chris

Why is my ping so high in the first column only when i do a tracert?

When i do a tracert my ping is really high in the first column only on each hop and then it drops to a respectable level. Does anyone know why it is like this on my 4G LTE device? On my dsl when i do the same ping test its pretty even across on each hop. This is what im seeing when i do a ping test on my 4G LTE device.
tracert www.yahoo.com
Tracing route to ds-any-fp3-real.wa1.b.yahoo.com [98.139.183.24]
over a maximum of 30 hops:
1     9 ms     3 ms     3 ms
2 1101 ms    34 ms    38 ms 193.sub-66-174-20.myvzw.com [66.174.20.193]
3   169 ms    55 ms    52 ms 49.sub-69-83-13.myvzw.com [69.83.13.49]
4    52 ms    56 ms    54 ms 194.sub-69-83-13.myvzw.com [69.83.13.194]
5   179 ms    58 ms    57 ms 101.sub-66-174-17.myvzw.com [66.174.17.101]
6   168 ms    57 ms    60 ms TenGigE0-0-1-0.GW14.BOS4.ALTER.NET [152.179.2.97
7   181 ms    58 ms    57 ms 0.ge-0-3-0.XL3.BOS4.ALTER.NET [152.63.17.130]
8   170 ms    59 ms    58 ms 0.ae3.BR1.NYC1.ALTER.NET [152.63.18.222]
9   177 ms    67 ms    59 ms ae11.edge2.NewYork.Level3.net [4.68.62.41]
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13   192 ms    49 ms    60 ms ae-4-90.edge4.NewYork1.Level3.net [4.69.155.210]
14   185 ms    51 ms    60 ms YAHOO-INC.edge4.NewYork1.Level3.net [4.28.130.82
15   380 ms    73 ms   129 ms ae-5.pat2.bfz.yahoo.com [216.115.96.67]
16   339 ms    69 ms   146 ms ae-4.msr2.bf1.yahoo.com [216.115.100.73]
17   215 ms   152 ms    80 ms xe-5-0-0.clr2-a-gdc.bf1.yahoo.com [98.139.128.11
18   289 ms   217 ms   217 ms et-17-1.fab6-1-gdc.bf1.yahoo.com [98.139.128.47]
19   187 ms    87 ms    79 ms po-14.bas2-7-prd.bf1.yahoo.com [98.139.129.227]
20   474 ms   314 ms   294 ms ir2.fp.vip.bf1.yahoo.com [98.139.183.24]
Trace complete.

hi there
see you never got an answer from vzw
take it you still have the high ping or no ping in my cases
your doing better then i
seems the lte is getting bad with this problem over time as my connection times out causing half loaded web pages and lots of buffering in video playback
i have had 3 tickets in the past 3 month to try and get this fixed but they say cant find anything wrong
and noone else is having the problem here are a few things that seems to have helped me out
1 increase your TTL time till live
this tells your computer to wait a bit longer before giving up and requesting that a packet of info be resent
2 in your computers network settings and reg you can change packet size to a smaller number and add a stop bit to the packet with a time stamp on each packet back in the old days this was what v 90 modems did to get v92 speeds and did help with noisy copper wire dial up and seems to help here too
http://www.dslreports.com/drtcp
is a tool that will help you change your computer setting and reg
use drtcp and the results from this page
http://www.dslreports.com/tweaks
xp win 7 win 8 this will help. vista did it right and dynamically change these settings on the fly and all of step 2 is unnecessary
remember your original settings write them down so you can go back to them should you have problems
also make a restore point and backup your reg before tinkering with windows os
send a private message to me if you need more help or get a computer savvy friend to help you out if you need
3 if your signal noise is under 4G -100bd the lower the better, there is a way to set your android to lte only mode.
more likely to lose data and voice in weak signal areas but great if tethering or hotspotting at home
dail *#*#4636#*#* this is a back door to your android software and is open source code by android os not vzw
and will not unlock your phone voiding warranties. be warned though if you set things wrong in here
you can make more problems be very sure what you change and do one thing at a time so you remember and can dial in again and change it back should you disable something you need. fyi each time you dial in the number it resets to vzw default setting and may look like it did not save setting but it doz. till you dial in again.
good luck
ron
ps im not a vzw rep in any way other then a fellow customer not getting answers.

"Pie chart in pivot view showing only the first column's results" in obiee

Hi,
In my pivot view(pie chart view+pivottable),i'm getting only the first column's result in pie chart..
I have added a column named *'A*' in rows and '*moneyspent*' in measuresfield and the '*period*' in the columnsfield in the pivot view.I'm calculating the sum of
the rows and columns..
I'm not getting the sum valueof moneyspent in the pie chart..instead i'm getting only the first column of period in the pivot table in the pie chart.
can anyone tell how can i get the sum value of pivot table in pie chart?
Thanks in advance..

Hi Prash,
let me try to give you an example based on the paint sample:
Use Markets.Region, Products.Brand, 'Sales Measures'.Units
choose a pivot view to display the result: region goes into the rows-section, Brand goes into the columns-section and Units into the measures-section
In the columns-section add a total using the 'add total' at 'Measure Labels' level
the result is a total column on the right side of the pivot.
looking like this:
Units
Brands
Region Enterprise Magicolor Mccloskey Valspar Units Total
Central 1032.....
Eastern 1485......
Southern 824.....
Western 580
What I am looking for is a new column 'Units Total pct'.
If I duplicate the measure to show the values in percent, I'll get a second column per Brand (showing the absolute and percentage values) - that's what I don't want
Regards
Andy

Select-String to search only first column in .CSV

Hello all,
I'm wondering if anyone knows a way to only search the first column of a .CSV file using Select-String. I guess I could probably import-csv and pipe the first column to select-string, but I was wondering if Select-string has this capability within itself?

Yes, a "large file that I only need a few lines from" is more the issue. And I was also just curious if Select-String had such functionality. For the file I am reading, it has over 23,000 lines (13MB), and there is a significant
performance increase with using select-string (over %4000 increase) :
Using Import-CSV and Where-Object: around 5.938 seconds
Using Select-String: around 0.138 seconds
Thus, if I have several strings that I want to search the file for, I would prefer to use Select-String. I suppose I could just do the following?
1. Use Select-string to search the file for each string I need to search for
2. Once I'm done searching for all strings, I can query the resultant data set to be sure the string is in the first column of each record in the dataset
3. If the string is not in the first column in the resultant data set, I can just remove the record.
Am I way off base here?

System only loading the first column from csv

Trying to load data from Excel saved as csv, but the preview and PSA shows data loaded only for the first column from the csv file. All other columns are not loaded from the csv. Changed the lengths of the fields from the datasource to match the ones in the csv to 8, but it only seems to load the first column. What could be the cause?

Hi
Check the file format once and general tab in Data source(make sour you selected comma separated file and symbol)
check below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
Regards,
Venkatesh

Swapping the first and last characters in a column

Hi,
Fairly new to T-SQL and i want to swap the first and last characters in a column.
Thanks
Umar Javed

Likewise i have also tried your suggestion and i still seem to be getting errors:
IF (@TYPE = 'SCRAMBLE')
BEGIN
DECLARE @SQLCOMMAND VARCHAR(2000)
SET @SQLCOMMAND = 'UPDATE ' + @TABLENAME + ' SET ' + @VALUE +
STUFF(STUFF(@VALUE,1,1,RIGHT(@VALUE,1)),LEN(@VALUE),1,LEFT(@VALUE,1))
EXECUTE(@SQLCOMMAND)
END
Umar Javed
Please post the errors.
EDIT: Actually looking at your code this will bring errors:
IF (@TYPE = 'SCRAMBLE')
BEGIN
DECLARE @SQLCOMMAND VARCHAR(2000)
SET @SQLCOMMAND = 'UPDATE ' + @TABLENAME + ' SET ' + @VALUE + ' = STUFF(STUFF('+@VALUE+',1,1,RIGHT('+@VALUE+',1)),LEN('+@VALUE+'),1,LEFT('+@VALUE+',1))'
PRINT @SQLCOMMAND
EXECUTE(@SQLCOMMAND)
END
I've also added a print command so it will show you what the code looks like upon concatenation. It's much easier to debug this way.

How to make a summary column appear only once (in the first page only) in SSRS 2008?

Hello Everyone,
How to make a summary column appear only once (in the first page only) in SSRS 2008?
Regards
Gautam S
Regards

Hi,
Assuming you have test data like this ;
select 'abc'as [GROUP],'NN' name , 1 id
union all
select 'abc' as [GROUP] ,'PP' name , 1 id
union all
select 'abc'as [GROUP],'RR' name , 2 id
Step1 : take Tablix with row group as your group Name .
Step2 : right Click on Row Group Details -> Delete-> Delete Group Only
Step3 : In Count Cell use below expression ;
=CountDistinct(Fields!id.Value)
Follow this link;
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b6b45917-0a26-4d15-be46-2c6a2697d6e9/distinct-rows-sum?forum=sqlreportingservices#5ffdee06-c2c8-44ea-a3a5-b958488bb6b5
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Read From Measurement File... removes X Values of first column?

During one of our tests, two instruments were switched at the terminal by accident. I need to read in the massive lvm files, remove the wrong scaling and apply the correct scaling, while switching the values in the columns and right it all to new files. Simple right?
I wanted to use the Read from Measurement File.vi to make things easier, because the files are very large and I would like to analyze them 100 rows at a time. Some of the the files are around 1.5 Gigs in size so I need to read them in chunks.
The read from measurement file keeps removing the first column from the data! It outputs the data as a signal (dynamic data) and I have to use the dynamic to numeric array express vi. For some reason, before I even get to that point, the first column is not in the data.
No matter what settings I pick on the read from measurement express vi, the time column is removed from the data. I have checked/unchecked the "first row is channel names" and "first column is time channel" to no avail. The odd thing is that in the preview it shows the first column, as if it will read it properly... but it doesnt. Nothing I change in the settings can seems to make a difference in getting the first column, the x values, out of the file.
Below you can see the first column completely removed from the data.
This is extremely frustrating. By probing the signal out I can see the dynamic data attributes and the time column has already been removed, so I don't think that the signal to double array express vi is the problem, but I am not sure.
I am attaching my VI and a small data file to be analyzed. You can see what I mean.
The alternatives seem less than adequate. The read from spreadsheet file vi wants an offset of a specific number of characters not rows. The problem is that this is not constant between rows for some reason, when hidden characters are taken into account so I cant just set the number of characters in 100 rows and increment the offset in a loop... like I normally would. That means I might miss data or get a corrupted row.
This means that I have to use the read from text file, read how ever many characters I think a row is (over estimating a bit) then search for the newline character, find out how many chars are in that set and then offset that for the next loop iteration, all while converting each string number to a double. Talk about slow.
I have searched around and found that I am not the only one that has had this issue. This is a common thing, but no one seems to have the answer. Why can't the read from measurement file VI read all of the numbers in every row? Why cant I tell it I want a 2d array of doubles out and not a dynamic data type? It has to be something I am doing wrong.
Attached is a zip file with my VI and two data files. The "S19_A_DSI_detensioning_c.lvm" is the one generated by my VI (_c meaning corrected). "S19_A_DSI_detensioning.lvm" is the original measurement file. I hope you will pardon my messy VI, it's a quicky.
Any help you guys can give would be much appreciated.
[will work for kudos]
Attachments:
Scaling Factor Correction.zip ‏1109 KB

That is a great workaround. The help talked about putting a check next to "read lines" but for the life of me I couldn't find where to do that. I wonder what other VIs have mystery check options in the right mouse click menu. I mean normally options like those are inputs, I thought. I'm going to start right clicking on every VI I drop to see if there are options there I never realized.
I would still have to use the set file position VI and specify the byte offset right? How would I know where that is? I guess each character is a byte and I would count the characters in the string retrieved and then offset by that amount on the next iteration using a shift register?
While waiting for help, I ended up using the read from text file and using the match string to look for the new line character, and using the spreadsheet string to array vi, analyzed the files line by line. Thats just because I couldn't easily come up with a regular expression to get 100 lines. It was slow but it worked.
However, that still really doesn't answer the question of why it is impossible to get the first column with the read from measurement file express VI. Does anyone know? Is this a known bug?
[will work for kudos]

SQL Trimming Characters in a Column

Hi,
First question here. My company is running Oracle 8i on HP - UX 11, if it helps. So here is the question:
I want to run an update statement that will remove 2-4 characters, only 4 variations from a column with 800 records.
Example, remove MD or M.D. from a Provider's Last Name. The problem is that the Provider's Last Name is from about 500 different providers, hence the variation.
Otherwise I would have to manually change every record with:
update table_name set provider_last_name = example
where provider_last_name = example MD
Any help or ideas would greatly be appreciated.

The number returned by the UPDATE statement indicates how many rows in the table Oracle performed the operation on. In your original UPDATE statement, Oracle performed the REPLACE operation on that field for every row... even though, for most rows, the REPLACE operation didn't change the row contents. For eg. if the column contents were 'xxx', Oracle would have set the column to REPLACE ('xxx','MD'), which is 'xxx'.
When you put the WHERE clause in, it only runs the statement for the rows that match the WHERE clause. The end results are the same, but the second way is faster.
-Natalka
http://toolkit.rdbms-insight.com

SQL Loader Inserts chr(13) and chr(10) in the first column of every row.

Hi,
I have exported a data in a pipe delimited file using TOAD in one database. Now I want to load the data in my local database using SQL Loader. However every time I try to load the data a double quote followed by a new line is entered for the first column of each row. Unfortunately the delimited file is very big and hence can't be posted here. However I tried the same with a customized table and its data and found the same problem. Below are the table structures and control file that I used.
create table test_sql
a varchar2(30),
b date
insert into test_sql values('51146263',sysdate-3);
insert into test_sql values('51146261,sysdate-1);
EXPORTED PIPE DELIMITED FILE_
A|B|!##!
51146261|04/14/13 4:55:18 PM|!##!
51146263|04/12/13 4:55:32 PM|!##!
create table test_sql1 as select * from test_sql where 1=2;
CONTROL FILE_
OPTIONS(SKIP=1)
LOAD DATA
INFILE 'C:\Users\Prithwish\Desktop\Test.txt' "str '!##!'"
PRESERVE BLANKS
INTO TABLE TEST_SQL1
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
A CHAR(2000),
B DATE "MM/DD/YYYY HH12:MI:SS AM"
select * from TEST_SQL1;
After this when I paste it in notepad I get the following result
A B
51146261" 14-APR-0013 16:55:18
51146263" 12-APR-0013 16:55:32.
I have no idea how the quotes or the newline appear. Is this a Toad bug? Any help would be greatly appreciated. Really urgent.
Thanks in advance
Regards

Hi Harry,
I actually thought that the str !##! was causing the problem. Actually my original export has some new lines in some specific columns so I can't keep the new line as my line terminator and hence I kept the !##! as my terminator.
When I put the same data in a notepad and load it there is no problem at all. For e.g I just typed the following in a notepad and the data loaded just fine.
A|B|!##!
51146261|01-01-01 10:10:10 AM|!##!
51146263|01-01-01 11:11:11 AM|!##!
Its just when I load the exported file there the problem arises though I have verified the file using UNIX as well using octal dump and found no hidden characters.
Regards,
Prithwish

How to get fourthly row (row4) first column value (col1) in matrix

Hi to all,
In FMS, how to get fourthly row (row4) first column value (col1) in matrix in document.
select $[$38.1.4]
But it display the first row
Please give me hint.
Thank you

Hi Eric,
FMS may only apply to current row. There is no way to get any other fixed row.
Thanks,
Gordon

WebCats - Only 4 characters of first column in search help get transferred

Similar Messages

Maybe you are looking for