System only loading the first column from csv
Trying to load data from Excel saved as csv, but the preview and PSA shows data loaded only for the first column from the csv file. All other columns are not loaded from the csv. Changed the lengths of the fields from the datasource to match the ones in the csv to 8, but it only seems to load the first column. What could be the cause?
Hi
Check the file format once and general tab in Data source(make sour you selected comma separated file and symbol)
check below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
Regards,
Venkatesh
Similar Messages
-
BULK IMPORT ONLY LOADS THE FIRST FOUR DIGITS FOR THE SIC CODE
Hi,
The issue is: DNB enrichment file has 8 digits SIC codes, but oracle bulk import only loads the first 4 digits and ignore the last 4. Just would like to whether it will be possible to import all the 8 digits of SIC code.
Thanks and regards,
HareeshI solved the problem by using destroy() method instead of finally block. Thanks,anyway,Jimmy.
-
Can any one help? I have tried several times to import a particular cd onto i-tunes, but each time it will only load the first 9 seconds of each track.
If it was a recent purchase you could take it back to the store and return it as "not fit for purpose", then buy a digital version. If it is too late for that I suppose you could try contacting the record company but I doubt they care at this point since they have the money. Can't really go into any possible workarounds without breaching the TOU.
tt2 -
All the data getting exported in the first column of csv while exporting
Hi All,
In 11.5.10.2, I have a page with advanced table region. Am using OA Framework's export button to export the results.
But, problem is, All the results are getting exported in the first column of the output .csv file. Why such a behavior?
Profile Option of 'Export MIME Type' value is text/text-separted-values.
Any ideas would be of timely help. Thanks.
Regards, SooryaFrom OAF standpoint, it just exports the data. Data interpretation is completely dependent on client machine and excel setups.
Please check the Data-->Text to Columns wizard where we can specify the delimiter(s) on excel.
Not sure if this can be set up in Apps, so that we need not change on every end-user machine.
Hope this helps.
-- Thanks -
BindAggregation only returning the first element from a XML node
hello everyone,
investigating on this issue since fiew hours, I need your help (did not find a similar issue).
here is an xml sample:
<users>
<user active="true">
<reference/>
<name>
<prefix/>
<first>first</first>
<middle/>
<last>last</last>
</name>
<location></location>
<identifier>
<domain>mydomain</domain>
<login>flast</login>
</identifier>
<email>
<address>[email protected]</address>
<type>text</type>
</email>
<roles>
<role name="A"/>
<role name="B"/>
<role name="C"/>
<role name="D"/>
<role name="E"/>
<role name="F"/>
<role name="G"/>
</roles>
<groups>
<group name="A1"/>
<group name="A2"/>
</groups>
</user>
</users>
After having set the data in the table:
oModel.setData(data);
oTable.setModel(oModel);
oTable.bindRows("/user");
I am able to bind correctly properties like first name & last name in my table... but I am not able to do a bindAggregate on roles !
When I do this, only the first role is returned everytime for each row.
With the example above,
It displays, : first as firstname, last as lastname, & only role A instead of displaying all roles from A to G as above in the xml.
Here is the bindAggregation:
oTable.addColumn( new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "Roles"}),
template: new sap.ui.commons.ListBox({
"items": {
path: "roles",
template: new sap.ui.core.ListItem({text: "{role/@name}",})
Where is my misunderstanding/mistake ? or how should I deal for having all roles displayed correctly in the listbox of this column ?
No proposal ?
Files (javascript & data) for reproducing this behavior are attached below,
Really thank's in advance to each of you for your coming help,
Best Regardshello everyone,
investigating on this issue since fiew hours, I need your help (did not find a similar issue).
here is an xml sample:
<users>
<user active="true">
<reference/>
<name>
<prefix/>
<first>first</first>
<middle/>
<last>last</last>
</name>
<location></location>
<identifier>
<domain>mydomain</domain>
<login>flast</login>
</identifier>
<email>
<address>[email protected]</address>
<type>text</type>
</email>
<roles>
<role name="A"/>
<role name="B"/>
<role name="C"/>
<role name="D"/>
<role name="E"/>
<role name="F"/>
<role name="G"/>
</roles>
<groups>
<group name="A1"/>
<group name="A2"/>
</groups>
</user>
</users>
After having set the data in the table:
oModel.setData(data);
oTable.setModel(oModel);
oTable.bindRows("/user");
I am able to bind correctly properties like first name & last name in my table... but I am not able to do a bindAggregate on roles !
When I do this, only the first role is returned everytime for each row.
With the example above,
It displays, : first as firstname, last as lastname, & only role A instead of displaying all roles from A to G as above in the xml.
Here is the bindAggregation:
oTable.addColumn( new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "Roles"}),
template: new sap.ui.commons.ListBox({
"items": {
path: "roles",
template: new sap.ui.core.ListItem({text: "{role/@name}",})
Where is my misunderstanding/mistake ? or how should I deal for having all roles displayed correctly in the listbox of this column ?
No proposal ?
Files (javascript & data) for reproducing this behavior are attached below,
Really thank's in advance to each of you for your coming help,
Best Regards -
When looking for images on Google Images why does Firefox only load the first page?
For over a month now whenever I've gone to Google Images only the first page of pictures is shown, the others are just gray boxes or nothing at all. I've cleared my cache and cookies, but don't know what else I can try.
Does it help if you disable "Google Instant" in the Google Search settings?
You can click the Gear icon (top right) to open the Google Settings page -
Select-String to search only first column in .CSV
Hello all,
I'm wondering if anyone knows a way to only search the first column of a .CSV file using Select-String. I guess I could probably import-csv and pipe the first column to select-string, but I was wondering if Select-string has this capability within itself?Yes, a "large file that I only need a few lines from" is more the issue. And I was also just curious if Select-String had such functionality. For the file I am reading, it has over 23,000 lines (13MB), and there is a significant
performance increase with using select-string (over %4000 increase) :
Using Import-CSV and Where-Object: around 5.938 seconds
Using Select-String: around 0.138 seconds
Thus, if I have several strings that I want to search the file for, I would prefer to use Select-String. I suppose I could just do the following?
1. Use Select-string to search the file for each string I need to search for
2. Once I'm done searching for all strings, I can query the resultant data set to be sure the string is in the first column of each record in the dataset
3. If the string is not in the first column in the resultant data set, I can just remove the record.
Am I way off base here? -
Separate first column from the others
Hi,
how can I separate the first column from the others in a way that it does not scroll out of the active window? I.o.w., I want column B, C, D.... to slip "under" A.
I got a "Names" list (column A), and in the following columns lots of stuff, and when I scroll to the right / to the last column, the Names are out of the window.
Thanks a lot!
PeterHi Peter,
That was I that provided that answer. Freeze Rows, Freeze Columns doesn't break a column or row from the table it allows the remaining rows or columns to scroll under it.
Here's the trick, the spreadsheet grid must be longer or higher than the boarder of Numbers program. In other words you cannot see the lower right or upper right of the far end of the spreadsheet. It's past the boarder. Then when you scroll it will slide right. Make the Grid out to column Y. Now make the program smaller in size. Now lock a column then as you move from cell to a cell farther right the columns will scroll left until you come to the end of the grid—in this example column Y.
Truly I hope that makes sense for you. I reread it, it confused me. It takes a few seconds to visually show it but, longer to explain. Think of tying a tie, bam it's tied now walk someone through tying it.
Cordially,
RicD -
Chosing "open all in tabs" only opens the first of the bookemarks in the folder.
I have upgraded my computer with a new processor, RAM, MoBo and GPU. I also updated to the latest version of Firefox.
All my bookmarks were transferred over. However there are two main problems. When I select a folder of bookmarks to open and select "open all in tabs" it only opens one tab and then only loads the first bookmark. I tried using a mozbackup to refresh the bookmarks but they still don't open.
However Firefox does open a load of multiple tabs from a previous browsing session. However the number of tabs is wider than my screen. I used to be able to use the scroll wheel on the mouse button to "flow" the bookmarks across the screen but that no longer works.
I have also discovered that I can no longer move tabs along.
All in all FF is stuffed and I am going to have to swap to Opera or another browser as in its current state FF is unusuable.
Please can anyone make any suggestions as to what I can do?Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
SQL* Loader Loading specific column from CSV file to the table
Dear All,
Iam Loading specific column from .CSV file to the oracle table.
Could pls help how i can load only that cols into the table
Eg: CSV file having id, Frst_name,Last_name, Address,Phone,Insurance etc
out of this I want to load only Frst_name,Last_name columns to oracle table say fname and lname.
Thanks in Adv.
JunuLily,
I made some changes to your table def but you will get the idea
-- Table EMPLOYEE
CREATE TABLE EMPLOYEE
EMPID NUMBER NOT NULL,
EMPNICKNAME VARCHAR2(10 BYTE) NULL,
FNAME VARCHAR2(20 BYTE) NOT NULL,
MI VARCHAR2(20 BYTE) NULL,
LNAME VARCHAR2(20 BYTE) NOT NULL,
FULLNAME VARCHAR2(20 BYTE) NOT NULL,
HIREDATE DATE DEFAULT SYSDATE NOT NULL
-- data file employee.dat
1,amy,b,amy b
2,cindy,d,cindy d
3,eric,f,eric f
4,gary,h,gary
-- Control file : Employee.ctl ( you can use truncate, replace or append , see sqlldr for more options)
load data
Truncate into table employee
fields terminated by ","
optionally enclosed by '"'
TRAILING NULLCOLS
empId INTEGER EXTERNAL,
FName char(20),
LName char(20),
FullName char(30)
now to load use following or you can speicify infile in control fle
sqlldr username/passowrd control=employee.ctl data=employee.dat log=employee.log
{code}
Hope this help.
Regards -
Why is my ping so high in the first column only when i do a tracert?
When i do a tracert my ping is really high in the first column only on each hop and then it drops to a respectable level. Does anyone know why it is like this on my 4G LTE device? On my dsl when i do the same ping test its pretty even across on each hop. This is what im seeing when i do a ping test on my 4G LTE device.
tracert www.yahoo.com
Tracing route to ds-any-fp3-real.wa1.b.yahoo.com [98.139.183.24]
over a maximum of 30 hops:
1 9 ms 3 ms 3 ms
2 1101 ms 34 ms 38 ms 193.sub-66-174-20.myvzw.com [66.174.20.193]
3 169 ms 55 ms 52 ms 49.sub-69-83-13.myvzw.com [69.83.13.49]
4 52 ms 56 ms 54 ms 194.sub-69-83-13.myvzw.com [69.83.13.194]
5 179 ms 58 ms 57 ms 101.sub-66-174-17.myvzw.com [66.174.17.101]
6 168 ms 57 ms 60 ms TenGigE0-0-1-0.GW14.BOS4.ALTER.NET [152.179.2.97
7 181 ms 58 ms 57 ms 0.ge-0-3-0.XL3.BOS4.ALTER.NET [152.63.17.130]
8 170 ms 59 ms 58 ms 0.ae3.BR1.NYC1.ALTER.NET [152.63.18.222]
9 177 ms 67 ms 59 ms ae11.edge2.NewYork.Level3.net [4.68.62.41]
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 192 ms 49 ms 60 ms ae-4-90.edge4.NewYork1.Level3.net [4.69.155.210]
14 185 ms 51 ms 60 ms YAHOO-INC.edge4.NewYork1.Level3.net [4.28.130.82
15 380 ms 73 ms 129 ms ae-5.pat2.bfz.yahoo.com [216.115.96.67]
16 339 ms 69 ms 146 ms ae-4.msr2.bf1.yahoo.com [216.115.100.73]
17 215 ms 152 ms 80 ms xe-5-0-0.clr2-a-gdc.bf1.yahoo.com [98.139.128.11
18 289 ms 217 ms 217 ms et-17-1.fab6-1-gdc.bf1.yahoo.com [98.139.128.47]
19 187 ms 87 ms 79 ms po-14.bas2-7-prd.bf1.yahoo.com [98.139.129.227]
20 474 ms 314 ms 294 ms ir2.fp.vip.bf1.yahoo.com [98.139.183.24]
Trace complete.hi there
see you never got an answer from vzw
take it you still have the high ping or no ping in my cases
your doing better then i
seems the lte is getting bad with this problem over time as my connection times out causing half loaded web pages and lots of buffering in video playback
i have had 3 tickets in the past 3 month to try and get this fixed but they say cant find anything wrong
and noone else is having the problem here are a few things that seems to have helped me out
1 increase your TTL time till live
this tells your computer to wait a bit longer before giving up and requesting that a packet of info be resent
2 in your computers network settings and reg you can change packet size to a smaller number and add a stop bit to the packet with a time stamp on each packet back in the old days this was what v 90 modems did to get v92 speeds and did help with noisy copper wire dial up and seems to help here too
http://www.dslreports.com/drtcp
is a tool that will help you change your computer setting and reg
use drtcp and the results from this page
http://www.dslreports.com/tweaks
xp win 7 win 8 this will help. vista did it right and dynamically change these settings on the fly and all of step 2 is unnecessary
remember your original settings write them down so you can go back to them should you have problems
also make a restore point and backup your reg before tinkering with windows os
send a private message to me if you need more help or get a computer savvy friend to help you out if you need
3 if your signal noise is under 4G -100bd the lower the better, there is a way to set your android to lte only mode.
more likely to lose data and voice in weak signal areas but great if tethering or hotspotting at home
dail *#*#4636#*#* this is a back door to your android software and is open source code by android os not vzw
and will not unlock your phone voiding warranties. be warned though if you set things wrong in here
you can make more problems be very sure what you change and do one thing at a time so you remember and can dial in again and change it back should you disable something you need. fyi each time you dial in the number it resets to vzw default setting and may look like it did not save setting but it doz. till you dial in again.
good luck
ron
ps im not a vzw rep in any way other then a fellow customer not getting answers. -
SQL Loader Inserts chr(13) and chr(10) in the first column of every row.
Hi,
I have exported a data in a pipe delimited file using TOAD in one database. Now I want to load the data in my local database using SQL Loader. However every time I try to load the data a double quote followed by a new line is entered for the first column of each row. Unfortunately the delimited file is very big and hence can't be posted here. However I tried the same with a customized table and its data and found the same problem. Below are the table structures and control file that I used.
create table test_sql
a varchar2(30),
b date
insert into test_sql values('51146263',sysdate-3);
insert into test_sql values('51146261,sysdate-1);
EXPORTED PIPE DELIMITED FILE_
A|B|!##!
51146261|04/14/13 4:55:18 PM|!##!
51146263|04/12/13 4:55:32 PM|!##!
create table test_sql1 as select * from test_sql where 1=2;
CONTROL FILE_
OPTIONS(SKIP=1)
LOAD DATA
INFILE 'C:\Users\Prithwish\Desktop\Test.txt' "str '!##!'"
PRESERVE BLANKS
INTO TABLE TEST_SQL1
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
A CHAR(2000),
B DATE "MM/DD/YYYY HH12:MI:SS AM"
select * from TEST_SQL1;
After this when I paste it in notepad I get the following result
A B
51146261" 14-APR-0013 16:55:18
51146263" 12-APR-0013 16:55:32.
I have no idea how the quotes or the newline appear. Is this a Toad bug? Any help would be greatly appreciated. Really urgent.
Thanks in advance
RegardsHi Harry,
I actually thought that the str !##! was causing the problem. Actually my original export has some new lines in some specific columns so I can't keep the new line as my line terminator and hence I kept the !##! as my terminator.
When I put the same data in a notepad and load it there is no problem at all. For e.g I just typed the following in a notepad and the data loaded just fine.
A|B|!##!
51146261|01-01-01 10:10:10 AM|!##!
51146263|01-01-01 11:11:11 AM|!##!
Its just when I load the exported file there the problem arises though I have verified the file using UNIX as well using octal dump and found no hidden characters.
Regards,
Prithwish -
Report from SQL Query -Excel format only show the first page
Hi,
I have some Reports from SQL Query. In the display options, I choose Excel as default format. The Excel documents only show the first page. If I choose HTML as default format, it shows every rows.
Please advise on how to have a complete Excel document as HTML format does.
Thanks a lot.
Lina HanI beleive when you export Oracle reports to Excel it is the Data that is transferred along with Column Names.
You cannot export the variables defined on the report.
Hence you will not be able to export the Footer to excel. (Still looking into it will let you know if i find anything interesting)
Regards,
Bhushan Salgar -
I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?
Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right. -
PDF sent from SAP 4.6C only shows the first 10 pages
Since a few weeks a spoolrequest that is produced by a job contains more than 10 pages. This report is automatically converted to pdf and mailed to an external recipient, but the pdf only contains the first 10 pages.
When I look into this spool request in SAP, I can see all pages.
Does anyone know how to include all pages in the PDF?
thanks in advance,
Maarten Ettemahi,
by default only the first 10 pages of spool are being saved (or converted to pdf in another way). you can change this settings. here i'll show you the way :
- goto SP02 or SP01, input suitable parameters
- select your spool request
- press F6 to display the content
- navigate to : goto >> display request >> setting
- from popup window, on "Display Area" section, you can set the page settings for your spool. the default value is only from page 1 to 10, you can set it as you need (in example from page 1 to 100), but beware, setting it too high in some case will cause memory issue.
hope it helps you.
rgds
alfonsus guritno
Maybe you are looking for
-
Can not see the ICON of Complete Order (Business Completion) in the IW32.
Hi All, I want to Complete the Maintenance Order (Business Completion) but I can not see Icon - Complete Order. to complete the Maintenance Order. I understand Order --- Function - Completion path can be used for competeion but it is disab
-
Document created succsesfully but attached file unable to open.
Dear Friends, For testing i was writing a program which is reading data from a db table and i am attaching its text file to newly created DMS. this below program created the DMS dcoument and shows the attachment but it is not opening it and giving m
-
Managed users with Active Directory?
Hi guys I was wondering if any of you can help me out. I'm looking to get a OS X Server 10.4 to act as a managed user server, with all the pros of Open Directory (ie Finder restrictions etc) and user home directories on the Xserve's HD, but to authen
-
Problems with body email using Email Event Generator
Hi I need to start a workflow when an email is received by a email account. In order to do that, I built a Email Event Generator that uses the next channel: <?xml version="1.0"?> <channels xmlns="http://www.bea.com/wli/broker/channelfile" c
-
Is anybody having a problem texting photos to non iPhone users?
Is anybody having problems texting photos to non iPhone users?