WebDav and ACL's problem

Hello,
i've the folders:
..\test\a
\b
The subfolder "a" has other ACL's than "b". User
"A" has an ACL to access "a" but not "b" and user
"B" has one to access "b" but not "a".
With WebUI and SAMBA, user "A" can only see subfolder
"a" and "B" can only see subfolder "b", witch
is ok.
With WebDAV user "A" and "B" can see subfolder "a"
and "b" and the have read/write access to both
subfolders, witch is not ok.
Please had someone an idea what could be wrong ?
Sincerly
Robert Brandl

I have applied an acl that allows access to one server as well as ICMP. When I apply it to the guest VLAN, I have connectivity issues. As in I cannot access the servers to which I gave explicit permission to access.
When I remove the ACL, I can connect to the remote servers.
I finally decided that a ACL on the WLC was not the way to go as I could not find supporting docos on the WLC 4.X software. So, I applied VACLs to the VLAN for the Guest WLAN and it works.

Similar Messages

WebDAV and ACLs

I'm writing some software that uses WebDAV to access data on iFS. I would like to be able to retrieve ACL data with WebDAV calls, but I can't see how to do this. Although I can retrieve file properties (with the PROPFIND method), they don't seem to include any ACL data.
There is a proposed extension to WebDAV that covers ACLs (see http://www.webdav.org/acl/). It outlines an additional ACL method (a WebDAV HTTP extension) for retrieving ACL data. However, when I've tried this, I get a response 500 Internal Server Error, subsequent WebDAV requests get a 503 Service Unavailable, and I have to re-start server-side processes!
Is there any way to retrieve ACLs from iFS with WebDAV?

Thanks, Matt.
It would be nice if sending an unsupported request didn't crash anything. Try opening a telnet connection to the relevant port and sending this:
ACL /some/file/that/exists HTTP/1.1
Host: whatever
<-- blank line
I would expect the response 501 Not Implemented, but I get 500 Internal Server Error, further requests give 503 Service Unavailable, and I have to re-start things.

I screwed up my permissions and ACLs

In a nutshell:
1. Upgraded from Tiger to Leopard 10.5
2. Did all subsequent upgrades to 10.5.2
3. Problems began with folder access - for example, I couldn't install widgets in the main library widgets folder; I kept getting a message that the folder was write-protected. Also, auto-recovery in MS Word aborted, presumably because I don't have access to the folder where those files are stored.
4. During my attempts to diagnose and cure the problem, I went to "Get Info" for my hard drive option and clicked on the dreaded "Apply to enclosed items". As everyone has warned, that was a bad move.
5. Did an archive and install of 10.5. After reading these discussions, I also reset all ACLs to their orginal settings.
6. None of this solved anything, so I did a second archive and install. That didn't help either. I still have the problems, and now when I repair permissions, I get the following messages:
ACL found but not expected on "private/tmp".
ACL found but not expected on ".vol".
ACL found but not expected on "Volumes".
ACL found but not expected on "cores".
ACL found but not expected on "Network".
ACL found but not expected on "private".
ACL found but not expected on ".".
Is there a solution short of doing an erase and install?
Thanks in advance.
Message was edited by: Dick Young

Here they are:
drwxrwxr-x+ 99 root admin 3366 Apr 17 18:19 /Applications
0: group:everyone deny delete
drwxrwxr-t+ 54 root admin 1836 Apr 17 14:42 /Library
0: group:everyone deny delete
Actually, as I explore this a little more, I see that I may have misunderstood some of what was going on, and I may have been testing access incorrectly. It looks now as if things are working the way they should, but I'd appreciate your looking at the results and letting me know if that's what they should be.
I greatly appreciate your help. This whole Unix permissions thing is terra incognito to me, and that makes it a bit scary.

New Mac with major permission and disk-write problems

Right, so I'm pretty new to Mac, after getting my first Mac computer (a 17-inch MacBook Pro) at the end of January this year. It's been great so far and I love the thing, but I've suddenly encountered some crazy problems which I'm pulling my hair out over because I have tried everything to fix them, and have had no luck.
I'll try to include as many details as possible, and I'm prepared to bear with anyone who asks me about something I've alrady tried, just so I can get this sorted.
Okay, so first of all, the main problem seems to be with permissions, mostly with disk-write permissions. Any apps that I want to install that required keychain access will no longer install. I enter my keychain password, hit Return, and the dialog box closes without continuing. So I hit "Install" again and it becomes a never-ending cycle of entering my password to no avail. Now, this happens with ANY application that requires keychain access to install. It is not limited to any particular application. I know my password is right because the box closes, and if I enter it wrong, the dialog box shakes because it is incorrect.
Furthermore, it seems keychain access is problematic in other apps. If I want to authenticate something, it will do the same thing as I mentioned before, meaning I get nowhere with the application.
From here, it gets worse. If I download something (anything), then restart my computer, it is still there. As it should be. However, if I delete an APPLICATION (not just any file) OR change preferences for some programs (one in particular that I specifically don't want starting up on.... startup), including through System Preferences>Users & Groups>Login Items, they will not save. This is driving me insane. For instance, I downloaded some free apps from the Mac App Store to try out, but decided I didn't want them. I tried to deleted them from the app folder and succeeded. Emptied trash. Gone. Restart, and.... they're back? So I tried to uninstall them via the Mac App Store, once I found you could do that. Again, it didn't work. Any Login Items preference changes don't stay after a restart.
Originally, none of this was a problem and everything was working fine. The first sign that something was wrong would be Apple Mail often asking for passwords, usually for my Hotmail accounts, saying that they were rejected by the server (but are correct passwords, I get the emails from the accounts, and the passwords are always accepted once I type them in, only to be asked for them some time later on for no apparent reason). At the time, I tried to repair the keychain, tried deleting and recreating the mail account entries and what not, but nothing helped. It still happens, but at the time, it was more of a niggly thing than an outright problem.
I should also mention that I did use BootCamp to install Windows 8 on a small partition, but after I couldn't boot back into Mac (I didn't realise you had to use the Option key whilst booting), I found out that you had to hold the Option key to get back into Mac, then used BootCamp to get rid of Windows. Everything was fine so far. Until I decided to reinstall Windows 8 with BootCamp. This is where things started going wrong. I decided to install a bootloader to make it easier for me to boot between the two systems. I was tossing up between rEFIt and Chameleon, and decided that rEFIt would be the best for my needs. So I downloaded and installed it, which seemed to go fine. Until I restarted. Mac would endlessly load (the spinning grey dots with the Apple logo).
Now, I actually managed to fix this, but I should probably go into more detail. First of all, holding the option key and selecting my Mac partition would allow me back into Mac, and same with Windows 8. At this point, I decided to uninstall Windows 8 to try fix my problems, except now BootCamp was giving me errors. I believe it was something about being unable to unmount the disc, but it may have been a different error. I don't entirely remember. So then I decided to try getting rid of rEFIt. I followed the instructions on the official site but it didn't work. So then I tried deleting the files with root (sudo) access through terminal. Which also failed....
So to the Recovery partition. Booting into Disk Utilities, I repaired permissions, which worked fine, and repaired the disk. I believe I had run the disk repair a few times before to try to fix BootCamp when it stopped working. Anywaym it had worked before, but this time, it said that it was corrupted and could not be repaired. Something about needing to reinstall Mac OS X. With all my files on this computer and currently nothing to back it up with (eventually I will have something to do backups with, but it'll have to wait a few months), I'm not going to do that.
Finally, I managed to delete the rEFIt files through Terminal within the Recovery partition. I ran permission repair and disk repair again to clean anything up. Disk repair gave me the same error, but now I could get back into Mac without holding the option key on every **** boot.
Now more problems had presented themselves. I decided that the lock under Login Items was probably preventing me form successfully changing my startup items. Trying to unlock it did the same thing as I previously mentioned. Type in my password, keychain accepts it, then nothing happens. The keychain settings were already defaulted so that keychain would stay unlocked after authenticated, and all stuff like that. Using "Get Info" on anything has permissions locked and again, I cannot unlock to change them, although looking at a PDF file just now, whilst still locked, it would allow me to add or remove users, so maybe that's not completely accurate. I believe I tended to look at the system folders though, and my name wasn't under ownership, although I don't believe it was meant to be, but I was hoping that maybe that would fix the problem. I guess not.
At this time, I still had my Windows 8 partition sitting around and couldn't get rid of it. I heard of the manual way to do it through Disk Utility. I tried this in Mac OS X, and through the Recovery partition, but neither worked. An error about being unable to unmount the drive. I finally found a way to remove it. Honestly, I don't completely remember how I did it, but I believe it was through a command line, uh.... command. Now I had free space that I couldn't use to expand my Macintosh HD partition back to full size, again with the unable to unmount error. Finally, I fixed this by booting from a Mac OS X installation disc that I happened to have, and using Disk Utility off of that. After that, Disk Utility no longer gave me errors for disk repair.
However, my other problems all still remained. I had written a little list of things I found on the internet for fixing my problems. One solution was to use "resetpassword" through terminal under the Recovery partition, then select Macintosh HD and select "Reset Home Directory Permissions and ACLs". That didn't work until I tried it through the Disk Utility on the Mac OS X installation disc. That worked, and once I was back into Mac, Spotlight started indexing again. However, nothing else had happened.
I should also mention that keychain access isn't completely non-existent for me. Setting up a new WiFi connection worked for me (that is, connecting to a new network), but now every time I connect to the network, I have to authenticate it. However, it does accept my keychain password and eventually connect.
Now, another thing on my list to try was single-user mode, and using "/sbin/fsck -fy" until everything was okay. Well, the first time, it found a bunch of errors, then fixed itself up. Then it was all okay. But nothing had changed. So trying again, I this time used ?/sbin/mount -uw /" which I believe is meant to allow writing access to the drive. Now when running "/sbin/fsck -fy", I had an error. Specifically, "Journal need to be replayed but volume is read-only".
So that's pretty much where I am up to at the moment. It seems to be a poblem with write permissions, possibly among other things. If it was Windows, I might be able to work it out easier, but being new to Mac, I'm still finding my way around. I guess this is a good learning experience, but it's not fun to have to deal with it so early on.
If anyone can help me, I'd greatly appreciate it. I have tried many things, so if you suggest something that I have tried and possibly forgot to mention, I'll let you know, but any help is still helpful, even if only eliminating possible problems/causes/solutions.

Actually you first post is so long that most people just glance at it and move on. To say the least you are very verbose.
Your problem stems from something going wrong with permissions, as you know. How and why that happen is usually a user error of some type.
You can try to repair permissions and see if that corrects it. If not I will leave other options to someone that may know more about the permission system on a Mac.

Webdav and InCopy compatible?

My company has had continual problems with file sharing externally.
We tried Dropbox and Xythos. Dropbox lets you save multiple versions of the same problem which causes obvious problems when 5 people are working simultaneously. Xythos was giving our off-site mac user download problems.
It's now been proposed that we use WebDav as our file sharing place. Does anyone know if this will mesh with InDesign and InCopy? I'm worried that the fact that you have to download a file will prevent the InDesign user from working while the editors are in InCopy. Or if there are multiple InCopy files in one InDesign file, only one person will be able to work on any of those at once, right?
Has anyone used this software?
Thanks!!
Kate

hi BWer,
check sap help ?
http://help.sap.com/saphelp_bw33/helpdata/en/9e/9f653ade969f4de10000000a114084/frameset.htm
You can access pre-calculated HTML pages in different ways:
· Using the BEx Download Scheduler
SAP recommends that you use the BEx Download Scheduler as an assistant when you download pre-calculated Web templates as HTML pages from the BW server. More information is available under Offline Scenario.
· Using a Web folder
As an alternative to the BEx Download Scheduler, you can also use the WebDAV Service of the document storage facility in the content management framework, to store pre-calculated HTML pages locally and easily. (Restricted) offline reporting options are available using this method. You can find further information about the WebDAV service under Implementing External Tools . See also: WebDAV (World Wide Web Distributed Authoring and Versioning). You can find additional information about this procedure under Downloading Web Templates Using WebDAVs and Web Folders
WebDAV (BW-BEX)
http://help.sap.com/saphelp_bw33/helpdata/en/e9/440042fe7cd511b1250008c784efb1/content.htm

ACL recipe problem

Hey all,
On 10.4.6 Server, we have two groups:
staff (which contains all user accounts)
accounting (which contains a subset of staff)
A sharepoint has POSIX permissions [admin=RW, staff=RW, everyone=none], and no ACLs defined.
However, there's a folder inside that sharepoint called Accounting. As you can guess, only the accounting group should have access to it. So I gave it the following perms:
POSIX [admin=RW, staff=none, everyone=none]
ACL [accounting=Allow Full Control, using the Workgroup Mgr]
Problem: the accounting group does NOT have access to the Accounting folder.
I presume this is because the members of the accounting group are also members of the staff group, the latter of which does not have POSIX access to the Accounting folder. However, according to Gerrit DeWitt's great ACL primer (http://discussions.apple.com/thread.jspa?threadID=318161), my understanding is that a folder's Effective Permissions are the union of POSIX and ACL -- thus I thought that the ACL Allow permission would trump the POSIX deny.
I guess I was wrong! Suggestions on how to mix this one right?
Thanks!

Your recipe looks good to me, but here's one suggestion: Did you just enable ACLs for the volume that houses that share point? If so, restart your server and try again. It's not well-documented, but restarting is necessary to switch from Effective Permissions to POSIX-only.
Note that if you already have files in the Accounting folder, setting the ACL on it (even if you specified file_inherit and directory_inherit), won't magically change the permissions of files and folders already there. To do that, either (1) copy the files out and back in for them to receive any inherited ACL entries, or (2) edit the ACL via chmod using the recursive (-R) option like this:
chmod -R +a "accounting allow readattr, readextattr, readsecurity, list, search, read, execute, writeattr, writeextattr, delete, delete_child, add_file, add_subdirectory, write, append, chown, file_inherit, directory_inherit" <path to Accounting directory>
I've added spaces after each ACL control in this entry for clarity. When using chmod, separate controls with just a comma. If you've already added an ACL like this via Workgroup Manager, delete it before issuing chmod, or replace the +a option with =a to edit the existing ACL entry.
Thank you for the kind words!
--Gerrit

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

A720 and windows 8 problems

Im trying to setup the a720 with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
If I run the windows 8 install, just for test, the touch is working, the problem is after install.
External hard disk not working when connect to any USB port, and unplug result in a system freeze.
Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* * * * Bugcheck Analysis * * * *******************************************************************************
SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
Debugging Details: ------------------
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xAB
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80060680506 to fffff800600fc040
STACK_TEXT: fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::NNGAKEGL::`string'+36216
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5010ac4b
FAILURE_BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
Followup: MachineOwner ---------

Ok, the problem is generated by NVIDIA VIDEO DRIVER!
Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
Anyway the solution is simple:
1 Turn OFF windows update, or change to selective install.
This prevent win update install NVIDIA driver in automatic way.
2 Uninstall NVIDIA driver sand NVIDIA related stuff.
3 Restart the machine, NOT POWER OFF, just restart.
4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
NOW RESTART.
After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

Authentication to XML DB via WebDAV and SSO

Hi,
Is there any way to be authentified by XML DB via WebDAV and SSO ?
If the access to our infrastructure of database servers is controled by SSO, once I'm authentified by OID (SSO), is it possible to pass that authentification to XML DB through standard port 8080 ?
Thank you for your help

This is planned for a future (not 10g) release

My 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort

my 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort ... ran CleanMyMac and freed up about 30GB of space but didn't help ... ran AdwareMedic so that's been sorted but the other issues that came up on the EtreCheck I need help with however i can't figure out how to paste the results on this page

thanks thomas ... here it comes
EtreCheck version: 2.1.5 (108)
Report generated December 29, 2014 at 5:03:07 PM GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (17-inch, Early 2009) (Verified)
    MacBook Pro - model: MacBookPro5,2
    1 2.66 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1920 x 1200
    NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 0:5:36
Disk Information: ℹ️
    FUJITSU MHZ2320BH FFS G1 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        [redacted]'s world too (disk0s2) / : 319.21 GB (30.39 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-868
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. iPhone
    Logitech USB Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
    /etc/hosts - Count: 29 - Corrupt!
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Roxio
    [not loaded]    com.roxio.TDIXController (1.7) [Support]
        /System/Library/Extensions
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
        /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
    [not loaded]    com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Startup Items: ℹ️
    AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
    Firewall: Path: /Library/StartupItems/Firewall
    RetroRun: Path: /Library/StartupItems/RetroRun
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.CS4ServiceManager.plist [Support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Support]
    [invalid?]    com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Support]
    [invalid?]    com.adobe.SwitchBoard.plist [Support]
    [loaded]    com.adobe.versioncueCS3.plist [Support]
    [loaded]    com.adobe.versioncueCS4.plist [Support]
    [running]    com.atomicbird.macaroni.launchd.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Support]
    [invalid?]    com.oracle.java.Helper-Tool.plist [Support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Support]
    [loaded]    com.skype.skypeinstaller.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.google.keystone.agent.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    [running]    com.prosofteng.DGMonitor.plist [Support]
    [running]    ws.agile.1PasswordAgent.plist [Support]
User Login Items: ℹ️
    CNQL1210_ButtonManager    ApplicationHidden (/Library/CFMSupport/CNQL1210_ButtonManager.app)
    System Events    ApplicationHidden (/System/Library/CoreServices/System Events.app)
    Mail    Application (/Applications/Mail.app)
    Firefox    Application (/Applications/Firefox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader 9/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Calendar    Application (/Applications/Calendar.app)
    Skype    Application (/Applications/Skype.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    MouseWorks Background    Application (/Library/Application Support/Kensington/MouseWorks.prefPane/Contents/Resources/Support/MouseWorks Background.app)
Internet Plug-ins: ℹ️
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
    Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
    EPPEX Plugin: Version: 3.0.0.0 [Support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
    ContentUploaderPlugin: Version: 1.2 [Support]
    iPhotoPhotocast: Version: 7.0
    RealPlayer Plugin: Version: Unknown [Support]
    PDEPrint: Version: 2.0 [Support]
    DirectorShockwave: Version: 11.5.2r602 [Support]
    PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Support]
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Support]
    DivXBrowserPlugin: Version: 1.3 [Support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
    Google Earth Web Plug-in: Version: 6.0 [Support]
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
User internet Plug-ins: ℹ️
    QuickTime Plugin: Version: 6.5.1
    fbplugin_1_0_0: Version: Unknown [Support]
Safari Extensions: ℹ️
    Ultimate [Installed]
3rd Party Preference Panes: ℹ️
    ASM [Support]
    DivX [Support]
    Flash Player [Support]
    Flip4Mac WMV [Support]
    Macaroni [Support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Destinations:
        G-DRIVE Mini [Local]
        Total size: 999.86 GB
        Total number of backups: 7
        Oldest backup: 2014-07-09 00:13:07 +0000
        Last backup: 2014-12-10 22:18:57 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    firefox
         1%    mds_stores
         0%    mdworker
         0%    Skype
Top Processes by Memory: ℹ️
    348 MB    firefox
    137 MB    Skype
    122 MB    mds_stores
    120 MB    com.apple.IconServicesAgent
    73 MB    Dropbox
Virtual Memory Information: ℹ️
    1.26 GB    Free RAM
    1.74 GB    Active RAM
    477 MB    Inactive RAM
    543 MB    Wired RAM
    503 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Dec 29, 2014, 04:58:09 PM    Self test - passed
    Dec 29, 2014, 10:58:04 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105804_[redacted].hang
    Dec 29, 2014, 10:54:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105433_[redacted].hang
    Dec 29, 2014, 10:52:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105233_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105024_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Skype_2014-12-29-105024_[redacted].hang

Here. Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem in game world strike

Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem want or were can I fit it pls

The e-mail for World Strike support is: [email protected]
You need to contact them with your questions.

PHP and MySQL Connection problem

I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.

I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
>

Many syncing and e-mail problems.

Hi folks, lots of syncing and e-mail problems here:
Syncing: My phone won't sync iCal (it tells me my phone is disconnected), my safari bookmarks or my email accounts. I've been through the threads here, tried resetting iSync, tried deleting calendars and resetting to 10 days instead of 30 -- still no luck. For e-mail, initially iTunes saw the e-mail accounts but did not sync theml. I tried the one-time advance settings and now it's not even seeing the accounts and still not syncing them. and for Safari, no luck with the bookmarks at all even thought the check-box is checked.
Also, the iPhone won't receive e-mail from any of my POP accounts, even the one I set by hand (because none of the settings synced.) I used the same settings that I have on my desktop, but no luck. I use RoadRunner, so I know I can't send off it. But I went to the genius bar today and they told me to just leave the SMTP server field blank and I should be able to receive, but all I get on wi-fi and edge is a message that says, "Cannot Get Mail, the connection to the server "pop-xxxxxx etc" failed." even on my home netowrk, with five bars, it can't seem to connect. (btw, it does seem to be working properly on my .Mac account, but I don't use that account for most of my correspondence.)
As far as the sync problems, the genius bar told me to reinstall iTunes, which I did with the new update that just came out this evening. Still no luck.
any thoughts? bum phone? some setting I'm not catching? any help would be appreciated.
Dave
Quad G5 Mac OS X (10.4.2)

You will find the iPhone will freak out over any kind of perceived data corruption. Calendars seem to the worst for this (windows or mac)
Test in a new user and try sending info in each direction. If it works - then your phone works fine.
Other users have reported having to basically copy the contents of their calendars into a sticky or text edit window. delete the calendars and create brand new ones. they then just transfer the data back.

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

WebDav and ACL's problem

Similar Messages

Maybe you are looking for