Webdynpro application in mobile

Hi friends ,
    i have developed a webdynpro application.when i called the url in my system application is opening,but when i call the same url
its getting dump im my mobile showing rabax_state .can we directly call the urls in our mobiles .is there any configuration is required.

Hi Sudhir
if you want to develop a 'webdynpro' application specifically for mobile, then you will have to create a 'Mobile' web dynpro application (which is a separate design environment from WD). Please refer to below given link for the same
For laptops
<http://help.sap.com/saphelp_nwmobile71/helpdata/EN/8b/0b674240449c60e10000000a1550b0/frameset.htm>
For handhelds
<http://help.sap.com/saphelp_nwmobile71/helpdata/EN/8b/0b674240449c60e10000000a1550b0/frameset.htm>
Best Regards
vaidehi
Edited by: Vaidehi Pandya on Dec 15, 2010 11:13 AM

Similar Messages

  • WebDynpro Application for WinMobile 6.5

    Hi Experts,
    Can anybody tell if there is an official SAP statement that WebDynpro supports or not Windows Mobile 6.5 devices? I can not find anything about that in the PAM.
    WebDynpro supports the URL Parameter sap-wd-client=PieClient to render WebDynpro applications on mobile Devices (Pocket Internet Explorer in our case). Our application works fine on a 5.5/6.0/6.1 device but with view bugs on a 6.5 device (seems that using ParameterMapping on IWDButton and IWDLinkToAction is ignored).
    Regards
    Michael

    Hello Michael,
    Windows Mobile 6.5 device has to be certified and for this the customer vendors should contact SAP to get it certified.                                                                               
    So, new devices that come out with 6.1 and later versions shall be supported by SAP, provided the devices are certified. Certification will be on a "device-level".                                                                               
    So, all you have to do is to ask your device vendor to get the devices certified with SAP.                                                                               
    So, if a device vendor wants to get a device certified - then they can approach SAP. We shall do the testing and then certify that the device can run SAP NetWeaver Mobile client. So, it does not matter if the device OS is 6.0 or 6.1 or later. We shall certify the device, and then customers can run the application on the certified mobile device.
    I hope this helps you.
    Regards,
    Blanca

  • Accessing Webdynpro ABAP application using Mobile Device..........

    Hi,
      Can any please let me know if we can access Webdynpro ABAP application using mobile device. If yes, what are the steps/procedure to be followed.
    Thanks.
    NP

    Hello,
    after 4 years in 2012, i bought a tablet pc (aldi lifetab), installed a firefox-browser, the add-on cert-manager, installed a client certificate. After doing this i can accces webdynpro for abap applications without any problems.

  • How to access custom JAVA webdynpro application from an iPad?

    Hi,
    We are trying to access custom JAVA webdynpro application from an iPad, but nothing is opening up from the iPad browser.
    What can be the possible reasons for this? Any kind of SICF enablement or opening up of ports in the network?
    Any inputs are welcome!!
    TIA,
    Regards
    Deepthi

    Hi,
    it is possible to show Java Web Dynpro applications on a mobile device in general, but the controls and the ui should be optimized for the mobile device.
    Safari devices are not officially supported so far for Mobile Web Dynpro.
    Supported are Windows Mobile devices and Blackberry devices. I also got some good results with Symbian devices.
    You can find more inforamtion on Mobile Always Connected at:
    ht[http://help.sap.com/saphelp_nwce711core/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/content.htm|http://help.sap.com/saphelp_nwce711core/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/content.htm]
    Best Regards,
    Stefan

  • Deployment of Application on mobile client failing.

    HI,
    I have created a simple webdynpro application and uploaded it to the DOE via SDOE upload archive transaction. Created MCD then assigned it to my devices.After synchronizing from my client i am getting message as 'Error in installation' and on client trace i can see the message as 'deployment failed, unrecoverable error'. In the SDA file-> mcd.xml file i cannot see mbo_name,dependency,trans_guid etc.
    could it be a problem?
    Appreciate your help!!
    Thanks & Regards
    Devendra

    Hi Nipun,
    I have used Mobile Application for Laptops.
    I can see the following error message in NWA.
    DOE  KEYMAP_SERVICE_AV Invalid Task. Node DEPLOYMENT_STATUS.
    Do you have any idea about this?
    Regards
    Devendra

  • How can I use an WebDynpro application off line?

    : Hello,
    I am developing a normal WebDynpro application to publish on my portal.  I would also like to use this app on my mobile engine (so I can use it off line) . What do I need to change of my WebDynpro application for it to work in the mobile client? The MC comes with tom cat light is there a way to deploy de webDynpro libraries for tom cat ?
    Any help is great help
    I am using :
    WebAS 640 sp 9
    MI 2.5 sp 9
    Windows 2000 + mobile client
    Thank you in advance,
    Guy

    Hello Guy,
    I am afraid that Gregor is right: WebDynPro is a complete online solution and has neither the aim nor the ability to become available offline. Ms Karin Schattka (SAP Product Manager WebDynPro) stated this very clearly in her TechEd04 presentation, which is available in SDN as well.
    To employ offline applications you can choose from the Mobile Business Solutions portfolio that SAP offers for it's "Mobile Infrastructure" which is part of Netweaver 04 and later. Several applications are available, such as Sales, CRM, AssetMgmt and Mobile Time and Travel.
    If nothing fits your needs you can develop your own applications using the MI framework. These are the options you have but unfortunately they have nothing to do with WebDynPro and No, there is no way to generically take Netweaver Portal content offline, as the portal (like WebDynPro technology) follows an online-only strategy.
    Best regards,
    Tim

  • WebDynpro Application

    Has anyone had to create a WebDynpro application that scans in a BarCode using an Intermec or Symbol device?

    Mobile Web Dynpro.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/feabace5-0601-0010-e48e-da7e7fc795a6
    Also search for 'Mobile Web Dynpro' in the Library.
    Regards,
    Rich Heilman

  • Webdynpro Application is not Deploying into Netweaver 2004s From NWDS CE

    Hi,
    I Developed Webdynpro Application in NWDS CE 7.1 SP5.
    I Am using Netweaver 2004s AS JAVA .
    After Deploying application i will get page can not be displayed and in the browser url is following below
    http://localhost:-1/webdynpro/dispatcher/demo.sap.com/firstapp/FirstApp?SAPtestId=2
    my actual port is 50000 but it gives -1.
    and also i need one clarification NWDS CE 7.1 Applications Supports the Netweaver 2004s or
    it requires Netweaver CE 7.1 AS JAVA.
    We have to develop applications using webdynpro,mobile perspectives in NWDS CE 7.1 SP5
    Is it Supports Netweaver 2004s.
    Thanks
    Subbarao

    Hi
    NetWeaver CE 7.1 uses Java 5 and so does the NWDS CE 7.1 by default. The server you have is NW 2004s SP 9 which runs on Java 1.4. So you simply can not build with Java 5 and deploy it to a server with JRE 1.4, you will get a class unsupported version error.
    Next you are using NWDS CE 7.1 to connect to server 2004s. The architecture of the Java servers in SAP is changed. 2004s has SDM and dispatcher and a server process at its simplest form. In CE theres an ICM and server. (SDM & Dispatcher combined). You no more give the message port number when you set up the JEE server of NWDS 7.1 instead you would use instance number. When you register a NW 2004s server with NWDS 7.1 (instance numbers are available for 7.0 servers as well), the studio fails to find the deploy mechanism (SDM or ICM) hence you see a port -1.
    Lastly the architecture of WebDynpro is greatly changed from NW 7.0 to NW 7.1 so dont even think of deployment to previous versions.
    Regards
    LNV

  • To get login details of portal into webdynpro application

    Hi All,
             How to get the portal login details(user name) into my webdynpro application.
    Thank you,
    Harsha P.

    Hi,
    If you want to have portal login details from backend system (with ABAP) you should ask this question in some portal forum and ask if it is possible. This has nothing to do with workflow or UWL. Even if you get the portal user ID to the backend system, then what? Do you want to manipulate the portal roles etc. from your ABAP WD application? Then you will have even more complicated requirements to achieve with ABAP. It is not that straightforward to call different portal functionalities from backend system. You might need to do some "portal development". And eventually your ABAP WD application might come just an unnecessary wrapper component for calling some web services or whatever in portal.
    Regards,
    Karri

  • Needs a background webdynpro application running at the server side

    Hi All,
    We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R/3 tables.
    We are thinking of a webdynpro java application.
    Can anyone suggest what kind of application needs to be implemented here?
    And what  would be the steps required to run the application at the server side without calling the application.
    Thanks & Regards,
    Anurag

    Hi Robin,
    Thanks for the detailed explaination.
    This may sound silly to you but I've another doubt which is as follows:
    As you mentioned that the external web application will be sending requests to our Web service(in SOAP envelopes) and rest of the functionality can be  achieved by our web service.
    Actually, we are expecting only responses from the external web application. The thing is that we are sending the requests to the external web applications from our custom webdynpro application and in return the web application will be sending us 2 responses.
    First response would be back to our WD java application URL(to the browser in which WD java app is running) which would get the response and display some message based on the response.
    Second would be to this web service which you have just suggested. We are having two responses so that even if the browser in which the WD java application is running gets accidentally closed, the response from the external web application must get captured somewhere else and should not get lost in any case.
    So, now since we are only expecting the response from the web application and we do not want any requests from the web application to our web service; how is this possible?
    I am asking the above question because you have mentioned that the external web application has to request our Web service but we want is only this web service to capture the response coming from the Web application.
    Or is it like the web application will send us the response string as request string to our Web Service and the web service will capture these response parameters as request parameters from the web application and do the further processing.
    But in that case, we do not want any response to be sent by the Web Service to the external web application.
    Please suggest if this is possible.
    Once again, many thanks for the help so far.
    Thanks & Regards,
    Anurag

  • SSO b/w portal and webdynpro application customized login??

    Hi,
    I  have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller). if user credentials are correct it performs some actions defined in webdynpro application.
    I want to configure SSO b/w portal and this webdynpro application sothat when user logon to the portal and open this webdypro application, Login page of webdynpro application should not be shown i.e user credentials should be passed from portal and corresponding authentication method in webdynpro should be called to authenticate the user.
    How to do the same without touching webdypro application ?
    Can we call a method of webdynpro application from portal?
    Regards
    Deepak

    1) To enable ticket authentication for the web dynpro iviews, you must maintain the definition of the system running the Web Dynpro application and set logon method to "SAPLOG"
    2)Since you have customized login screen, you need to bypass this screen manually when you login from portal.
    Add parameter to the application while defining the iview.Give some constant value.
    Check value of this parameter in webdynpro and fire to next view.

  • How To Get GP Process Parameters in a Webdynpro Application runtime

    Hi ,
    Iu2019 ll hope you can help me to solve my problem with GP process.
    Iu2019 m trying to get GP process parameters from a Webdynpro application.
    I have to get parameters during the process runtime in every step of the process using
    a webdynpro application with the following code:
          IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
          try {
                IGPProcessInstance processInst = rtm.getProcessInstance(processId,userContext);
                IGPProcessInstanceInfo procInfo = rtm.getProcessInstanceInformation(processInst.getID(),
    userContext.getSAPUser());
                IGPStructureInfo inputstructInfo = processInst.getTemplate().getInputParameters();
                IGPStructure inputparams = GPStructureFactory.getStructure(inputstructInfo);
          } catch (GPEngineException e) {
                // TODO Auto-generated catch block
    //          e.printStackTrace();
                manager.reportException("GPEngineException:"+getStackTrace(e), false);
          } catch (GPInvocationException e) {
                // TODO Auto-generated catch block
    //          e.printStackTrace();
                manager.reportException("GPInvocationException:"+getStackTrace(e), false);
    But printing the values of attributes with u201Cinputparams.getAttributeAs... ("param name")u201C the value returned is always 0. On the contrary if I check the same parameters structure in the runtime
    GP view of the portal, the values are those that I have set in the start process wizard.
    Have you a solution for this question?
    Thanks in advance
    Luca

    hi Abhimanyu
    I believe originally access to session was deliberately not made available inside WDA.
    Growing security concerns due to misuse of session information and
    perhaps other reasons as well.
    X.509  is considered a better approach.
    This may not help you in your problem.
    But you may see a trend in WDA pushing more robust and client independent
    approaches.
    Full x.509 access should remove the need for session fiddling.
    Also when developers access such session info directly, there is a possiblity
    when they dont understand the technology exactly that they create a security hole.
    You may know how to do safely, it is however discouraged.
    Im not aware of a way to get at the session info inside the WDA framework.
    Well not without a mod to the framework.
    It may be possible without a mod, but I dont know the trick.
    If someone has a little trick... please post.
    You may need to use BSP, if your only solution requires access to the session info.
    regards
    Phil

  • Database connection in a WebDynpro Application - urgent

    Hi
    I am facing a problem with database connection. I am trying to develop a normal webdynpro application.
    I want to retrieve data from a table and show it.
    But my query is not giving the expected output. It is not even raising errors.
    Please give me an answer
    Thanks & regards
    Aparnna

    Connection con=null;
      Statement st=null;
      ResultSet rs=null;
    public void wdDoInit()
        //@@begin wdDoInit()
    try
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con = DriverManager.getConnection("jdbc:odbc:erdsn","root","enteg123");
      st=con.createStatement();
        catch(Exception e){
        //@@end
    public void onActiononClickLogin(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActiononClickLogin(ServerEvent)
         String desig=null;
    try{
    rs = st.executeQuery("select *  from Login where Empid like uid and Pword like pw");
        if(rs.next()){
               desig=rs.getString("Designation");
         wdComponentAPI.getComponent().getMessageManager().reportSuccess(desig);
        if(desig.equalsIgnoreCase("Employee")){
              wdThis.wdFirePlugEmpOutPlug();
         else
         wdComponentAPI.getComponent().getMessageManager().reportWarning("Invalid input!");
          }catch(Exception e){

  • Need help in developing a webdynpro application using UWL API

    Hi developers,
    Iam developing a new WebDynpro application for UWL using UWL API.the functionality is to dispaly the summary of UWL like number of unread items, total items.
    Iam getting the problem while deploying the application, iam getting warning while deployed the application.
    I have given all possible ways mentioned in the below forum link
    Re: Accessing PortalRuntime at runtime?
    The exact problem is coming at reference file.
    Please giude me how to move forward.
    1. Below is the error when given "tckmcbc.uwl~api" in the service entry
    deployed with warning :
    Finished with warnings: development
    Caught exception during application startup from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application local/UWLCountDemo for startup. Reason=Clusterwide exception: Failed to start dependent service ''tckmcbc.uwl~api'' of application ''local/UWLCountDemo''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
    2.Below is the error  when i gave PORTAL:sap.com/tckmcbc.uwl~api in the sharing refernce entry
    Finished with warnings: development
    Caught exception during application startup from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/UWLCountDemo cannot be started. Reason: it has hard reference to resource tckmcbc.uwl~api with type application, which is not active on the server.
    Thanks in Advance
    Sekhar.
    Edited by: sekhar c on Mar 21, 2009 11:24 AM

    Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
    How to use UWL API for NetWeaver BPM Tasks
    The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

  • Single Webdynpro Application with multiple JCO Connection ?

    Hi Experts,
    I have a strange requirement ......
    We have a Webdynpro Application which is connected to
    say (using JCO connection)
    client:- A
    now i want to connect the same Webdynpro application to
    Client:- B which is again in the same server as the client A.
    Please help me how to handle this.
    how it possible to connect a single Webdynpro application to two different clients using JCO Connection.
    Please help.
    Points would be rewarded to helpful answers.
    Regards,
    Sanjyoti.

    Hi experts
                        We have to use  wd application for both client at a same time e.g. as follow
    Client A -
    > Travel app--->Featches data from A for   employee hired in client A ,in same server as B
    Client B -
    > Travel app--->Featches data from B for   employee hired in client B , in same server as A
    we  are using same EP for both client but using diffrent roles for employees of both client.
    Please reply asap.

Maybe you are looking for

  • Edit files on a server with dreamweaver CS5

    I am having a problem editing files directly from a ftp server. I just updated to Cs5 from Cs3 and seem to of lost the ability to edit and change files on a live server. I understand that I can download an entire site, but with the amount of sites th

  • T20 connection

    Hi, Does anybody know which is the best quality external speaker connection to use from a tv. Is it 3.5 mm headphone socket, or RCA phono connection. Thanks.

  • OSB 10.3 connectivity to Database: Recommended approach?

    Hi OSB 10.3 doesnt yet provide JCA adapter framework to connect to database. In Oracle integration world, this is one of the foundational requirement. We understand that we can write and call a BPEL wrapper and fetch data using SOA suite DB adapter.

  • ExecuteBatch() with java.lang.NegativeArraySizeException

    Friends, I'm using this code : try { conn.setAutoCommit(false); PreparedStatement pstat = conn.prepareStatement("INSERT INTO tb_fre_tran_in (fre_tran_id, fre_tran_in_tlv_seq, fre_tran_in_tlv_value) VALUES (?, ?, ?)"); for (iCount=0; iCount<in.getSize

  • Where to buy songs, but not from  iTunes?

    I'm a 75 year old retired man who simply loves to take pictures of my family and all other family events that occur in what is left of my limited time here on earth!.. And, I'm having the time of my life creating wonderful slideshows of these events,