WebHelp and Number of Files Generated

Hi,
Using RH 7.0 to build our WebHelp system. Is it really
necessary to take all the files that are outputted to the WebHelp
folder? I am checking these into a location for engineering to pick
up in their builds so that the context sensitive help works. I am
not even sure what 1/2 of these files are or what they are used
for.
I have been reading about RoboHelp Packager for Adobe AIR,
would this be something to look into to reduce file count?
Thanks,
Mary

Hi hardlyworking
Okay, now it is me that is confused. For starters, and just
to clarify, I suspect MEP45 was/is creating a single WebHelp target
with no Student/Admin stuff. Just basic WebHelp was what I was
assuming was being discussed.
Now on to your issue. How are you generating? Batch generate?
Are you using a merged setup? Conditional tagging? We need more
information to go on here.
The bottom line here is that many folks see the swarm of
WebHelp files and think that surely there has to be some way to put
it on a diet and slim it down a bit. But all those files are there
for a reason. Accommodating different browsers, different settings
within the same browsers, different versions of the same browser,
etc. While it would be possible to ferret out all the files that
aren't needed for your own situation and delete them, it would have
to be done each and every time you updated the help. From an
efficiency standpoint, it's simply better to consider all of them
necessary and adapt to the flow.
Cheers... Rick

Similar Messages

Problems converting PDF to MS Word document. I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the co

Problems converting PDF to MS Word document. I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure. I attempted to convert the entire document and same result. I specifically purchased the export to Word feature. Please assist. I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

Hi sdr2014,
I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
So, let's try this:
If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
Please let us know how it goes.
Best,
Sara

Degree of parallelism and number of files in tablespace

Hi,
I am trying to find out the relationship between the number of files in a tablespace and degree of parallelism. does number of files in a tablespace effect dop in parallel query. because if more files are in the tablespace so the IO of the system has increased and system has become more feverable for parallel query.
However i looked into the formulas for calculating dop i dont find any parameter which specify how many file are there in a tablespace. please give me the formula of calculting dop in oracle.
regards
Nick

Maurice Muller wrote:
Did you run this test on an Exadata Storage Server? How much IO throughput did you have per process? No. That one is from a RAC cluster of DL580 G5s. There were 7 in that query, but I had 8 total. One was down at the time due to hardware failure.
The >500 DOP is from a RAC cluster of 16 DL580s (so DOP=512) to be exact.
The amount of I/O you get per slave (or talking aggregate) is dependent on what the query execution plan is. Simple things like select count(*) are very I/O intensive, but not very CPU/memory intensive. The blocks are read, counted and then discarded. A group by or hash join will be more CPU intensive and less I/O intensive. Over the course of a given query execution the use of resources will generally alternate. Heavy on I/O at first, then more CPU heavy for a hash join, etc.
How much IO throughput do you recommend per CPU(Core) for an Oracle DWH server?As a rule of thumb I size systems to have around 100MB/s of physical I/O throughput per CPU core. So for a four socket quad core DL580 G5 (16 cores) target 1600MB/s, which works out nicely to four 4Gbps FCP ports. Do note if you are using compression you will be delivering a logical I/O rate higher than the physical based on the compression ratio for the data.
With Exadata, things are a little different. Since the CPUs that do the physical I/O are not at the DB layer, no wait I/O shows up in the metrics. The db blocks are transferred to the host using iDB protocol, not FCP like most external storage.
For instance, here is a screen capture of a HP Oracle Database Machine running a single query that uses PQ
http://structureddata.org/files/life_without_waitio.png
The problem is that most storage system are, from my point of view, much to slow compared to the available CPUs performance. In most cases people don't realise that the IO throughput required for large parallel queries is not comparable with the one required for an OLTP system having >90% cache hit ratio.Very true. Also discussed here:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28313/hardware.htm
Regards,
Greg Rahn
http://structureddata.org

SAPFPAYM_MERGE and PMW/DME file

Hello Gurus,
I want to use the transaction FBPM1 to group the payment media. I am also using PMW with the DME tool.
I don't understand the link between the program SAPFPAYM_MERGE and the number of file generated...
Is there a link betwwen the number of files created by the program SAPFPAYM_MERGE and the events customized into the DME?
I need to have several file per SAPFPAYM_MERGE run, do you know how I could customize a specific sort criteria?
Thank you in advance for your help
Best regards
Pascal.

HI
I think this link could help, hopes it do so
http://wiki.sdn.sap.com/wiki/display/Snippets/%28DMEE%29ReturingMultiplerecordsfromExitFunctionModuletoanElement
Regards
Jose

How to use the RSA key files generated by Crypto++ in java

Hi - Good day to all :)
I have two RSA key files(private key file and public key file) generated by Crypto++ 5.2.1:
code here:
void GenerateRSAKey(unsigned int keyLength, const char *privFilename, const char *pubFilename, const char *seed)
     RandomPool randPool;
     randPool.Put((byte *)seed, strlen(seed));
     RSAES_OAEP_SHA_Decryptor priv(randPool, keyLength);
     HexEncoder privFile(new FileSink(privFilename));
     priv.DEREncode(privFile);
     privFile.MessageEnd();
     RSAES_OAEP_SHA_Encryptor pub(priv);
     HexEncoder pubFile(new FileSink(pubFilename));
     pub.DEREncode(pubFile);
     pubFile.MessageEnd();
}generated private key is:
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use this key in java
BufferedInputStream input=new BufferedInputStream(new FileInputStream("privateKey"));
          int size= input.available();
          byte[]buffer=new byte[size];
          input.read(buffer);
X509EncodedKeySpec lX509EncodedKeySpec = new X509EncodedKeySpec(buffer);
          PrivateKey lPrivateKey = KeyFactory.getInstance("RSA").generatePrivate(lX509EncodedKeySpec);there is a exception,at generatePrivate() method
at sun.security.rsa.RSAKeyFactory.generatePrivate(RSAKeyFactory.java:294)
     at sun.security.rsa.RSAKeyFactory.engineGeneratePrivate(RSAKeyFactory.java:171)
     at java.security.KeyFactory.generatePrivate(KeyFactory.java:322)
     at test.Main.main(Main.java:27)any body can help me?

X509 is for public keys, not private keys. You need PKCS8 using PKCS8EncodedKeySpec on the hex decoded private key string.
Your method for reading the private key from the file is flawed. The method available() does not guarantee to give you the file length. This is easy to prove since files can be longer than Integer.MAX_VALUE and available() returns an 'int'. To get the file length use File.length() which returns a 'long'. Also, reading from an InputStream using
input.read(buffer); does not guarantee to read all the bytes. For that you need to use something like DataInputStream.readFully().

"Get Info" Reports an Incorrect Number of Files in a Directory

I have a 17" MacBook Pro with OS X, 10.6.4. I've been relying upon Finder's "Get Info" to determine how many files a directory contains, and I never noticed any problems when using it. However, this afternoon I saw an anomaly with the actual number of files in a directory and what "Get Info" reported.
I had previously created a new directory and moved 23 files to it. This morning I added three (3) more files to the directory, for a total of 26 files. This afternoon I added another five (5) files for a final total of 31 files in the directory. While Finder's "Get Info" showed that the directory had been updated this afternoon, it would not update the number of files it contains -- it still showed 26 files and the old total file size. I had to log out and log back in again for it to show me the correct file size and number of files.
Is this normal behavior or was it a glitch in Finder? That is, can I rely upon Finder to tell me the correct number of files in a folder -- or not?
Is there a way to force Finder to refresh itself? I looked around, but I did not see anything obvious, which is why I tried the logout/login method of refreshing it.
Thanks,
Bev in TX

Welcome to Apple Discussions.
This is a known issue in Finder. No fix I know of but a decent refresh here.
-mj

Number of files in unix directory

Hi All,
anyone can help me, how can I get the number of files in specific unix directory and number of files in each
sub-directory inside that directory?
Thank You

Hi,
Use the following program which will list the files on a unix system.
Put/modify the logic for getting the file count. (play around)
REPORT ZUNIXFILES MESSAGE-ID Z1
                  NO STANDARD PAGE HEADING
                  LINE-COUNT 65
                  LINE-SIZE 132.
Global Variables.                                                   *
DATA: BEGIN OF TABL OCCURS 0,
          LINE(2000),
      END OF TABL.
DATA: PARCOM_LOC LIKE RS37A-LINE.
DATA: SIZE(10) TYPE C,
      LINE     LIKE TABL-LINE,
      SUM(16) TYPE C.
DATA: FILE LIKE RS37A-LINE.
DATA: PATH(255) TYPE C.
Parameters.                                                       *
SELECTION-SCREEN SKIP 2.
PARAMETERS: PARCOM LIKE RS37A-LINE.
*AT SELECTION-SCREEN.
AT SELECTION-SCREEN.
CONDENSE: PARCOM NO-GAPS.
*TOP-OF-PAGE.
TOP-OF-PAGE.
PERFORM WRITE_PAGE_HEADING.
*INITIALIZATION.
INITIALIZATION.
PARCOM = '/usr/sap/*'.               "Only default value
*START-OF-SELECTION.
START-OF-SELECTION.
PERFORM MAKE_LOC.
PERFORM COLLECT_DATA.
PERFORM FILE_LIST.
*AT LINE-SELECTION.
AT LINE-SELECTION.
CLEAR FILE.
FILE = SY-LISEL+55.
REPLACE '|' WITH SPACE INTO FILE.
IF SY-LISEL+1(1) = 'd'.
     PATH = FILE.
     PATH+200 = '/*'.
     CONDENSE PATH NO-GAPS.
     SUBMIT ZUNIXFILES
       WITH PARCOM = PATH
       AND RETURN.
ENDIF.
SUBMIT ZBROWSEFILE            "Call the browse program
     WITH PARCOM = FILE
     AND RETURN.
FORM MAKE_LOC.                                                      *
FORM MAKE_LOC.
CLEAR: PARCOM_LOC.
PARCOM_LOC(7)    = 'ls -ld '.
PARCOM_LOC+7(45) = PARCOM.
ENDFORM.
FORM COLLECT_DATA.                                                  *
FORM COLLECT_DATA.
REFRESH TABL.
CALL 'SYSTEM' ID 'COMMAND' FIELD PARCOM_LOC
                ID 'TAB'     FIELD TABL-SYS.
ENDFORM.
FORM FILE_LIST.                                                   *
FORM FILE_LIST.
FORMAT RESET.
CLEAR SUM.
LOOP AT TABL.
    CLEAR LINE.
    LINE = TABL-LINE.
    WRITE /2 LINE.
    PERFORM VERTICAL_LINES.
    SUM = SUM + SIZE.
ENDLOOP.
WRITE:/1(132) SY-ULINE.
ENDFORM.
FORM WRITE_PAGE_HEADING.                                          *
FORM WRITE_PAGE_HEADING.
WRITE:/1(132) SY-ULINE.
PERFORM VERTICAL_LINES.
FORMAT INTENSIFIED.
WRITE: /2(131) SPACE COLOR 1.
WRITE: 2    SY-DATUM COLOR 1.
WRITE: 35 'File Manager' COLOR 1.
PERFORM VERTICAL_LINES.
WRITE:/1(132) SY-ULINE.
PERFORM VERTICAL_LINES.
FORMAT INTENSIFIED.
WRITE: /2(131) SPACE COLOR 3.
PERFORM VERTICAL_LINES.
FORMAT RESET.
WRITE:/1(132) SY-ULINE.
ENDFORM.
FORM VERTICAL_LINES.                                              *
FORM VERTICAL_LINES.
PERFORM WRITE_VLINE USING ' ' 1.
PERFORM WRITE_VLINE USING ' ' 132.
ENDFORM.
WRITE_VLINE.                                                      *
FORM WRITE_VLINE USING MODE POS.
IF MODE NE 'T'.
    FORMAT INTENSIFIED.
ENDIF.
POSITION POS.
WRITE: SY-VLINE.
IF MODE NE 'T'.
    FORMAT RESET.
ENDIF.
ENDFORM.

Rman backup failure, and is generating a large number of files.

I would appreciate some pointers on this if possible, as I'm a bit of an rman novice.
Our rman backup logs indicated a failure and in the directory where it puts its files there appeared a large number of files for the 18th, which was the date of the failure. Previous days backups generated 5 files of moderate size. When it failed it generated between 30 - 40 G of files ( it looks like one for each database file ).
The full backup is early monday morning, and the rest incremental :
I have placed the rman log, the script and a the full directory file listing here : http://www.tinshed.plus.com/rman/
Thanks in advance - George
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055071_s244_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055096_s245_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734573008_s281_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055045_s243_s1
-rw-r----- 1 oracle dba 524296192 Jan 18 00:03 database_f734055121_s246_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055020_s242_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054454_s233_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054519_s234_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054595_s235_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054660_s236_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054725_s237_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054790_s238_s1
-rw-r----- 1 oracle dba 209723392 Jan 18 00:02 database_f734055136_s247_s1
-rw-r----- 1 oracle dba 73408512 Jan 18 00:02 database_f734055143_s248_s1
-rw-r----- 1 oracle dba 67117056 Jan 18 00:02 database_f734055146_s249_s1
-rw-r----- 1 oracle dba 4194312192 Jan 18 00:02 database_f734054855_s239_s1
-rw-r----- 1 oracle dba 2147491840 Jan 18 00:02 database_f734054975_s241_s1
-rw-r----- 1 oracle dba 3221233664 Jan 18 00:02 database_f734054920_s240_s1
drwxr-xr-x 2 oracle dba 4096 Jan 18 00:00 logs
-rw-r----- 1 oracle dba 18710528 Jan 17 00:15 controlfile_c-1911789030-20110117-00
-rw-r----- 1 oracle dba 1343488 Jan 17 00:15 database_f740621746_s624_s1
-rw-r----- 1 oracle dba 2958848 Jan 17 00:15 database_f740621745_s623_s1
-rw-r----- 1 oracle dba 6415990784 Jan 17 00:15 database_f740620829_s622_s1
-rw-r----- 1 oracle dba 172391424 Jan 17 00:00 database_f740620814_s621_s1

george3 wrote:
Ok, perhaps its my understanding of RMAN that is at fault. From the logs :
Starting recover at 18-JAN-11
channel m1: starting incremental datafile backup set restore
channel m1: specifying datafile copies to recover
recovering datafile copy file number=00001
name=/exlibris1/rmanbackup/database_f734055020_s242_s1
recovering datafile copy file number=00002
name=/exlibris1/rmanbackup/database_f734055045_s243_s1
it seems to make backup copies of the datafiles every night, so the creation of these large files is normal ?Above results indicate that you have full (incremental level 0) backup(all datafiles copies ) and there happen update/recover (applying incremental level 1) backup.So there was happen applying */exlibris1/rmanbackup/database_f734055045_s243_s1* inremental backup to full(level 1) backup.And size should be normal
Why is it making copies of the datafiles even on days of incrementals ?
Because after getting level 1 backup and need applying and every day will apply one incremental backup.

Why did my index.htm file generate blank? and other weirdness.

Here's the story. Maybe someone can tell me where I made my mistake, or what happened. I'm numbering the steps for convenience in discussing this.
1) I started a new project, a WebHelp project.
2) I imported content in Word.
3) I created an index, glossary, and TOC. I used wizards for some of this.
4) I created a style sheet and applied it to all the topics.
5) I added a skin from the gallery.
6) I generated output.
Then I sent that output to the UI developer on my project. He plugged it in to the web app, and it seemed to work fine. So then:
7) I opened the project, edited the text, and removed glossary links (because I didn't like how they were working) individually.
8) I generated a new TOC to match the changed topic structure (minor changes).
9) I generated another output.
I sent that output to the UI developer and he said it was blank. I opened index.htm and sure enough, it was indeed blank. In fact, it was Zero KB. I also noticed that four other files were blank: whfform.htm, whform.js, whskin_plist.htm, and whtbar.js.
So then I decided to start over. I created a new project, imported just the html topic files from the old project, redid the index (in a hasty and less thorough manner), decided to bail on the glossary for now, did a TOC and sent that to the developer.
Now the Search pane is totally wonky, showing a list of characters and terms.
So I am getting frustrated. The developer has tried monkeying around with stuff on his end, but it's not working. So he says, why don't you send me a build with everything?
The problem is, I have two broken builds. The first one, which for whatever reason has the blank index.htm file (and other blank files), and the second one, which has no glossary, a messy index, and a screwed up search.
I can't seem to find anyone else having this problem. :-/ Can someone help?
Thanks so much,
Tamarleigh

I am having the exact same problem, and I think I've figured out what is happening here. There is an issue when mapping Word styles into RH. The person who setup our Word template included a sidehead with conditional text to hide instructor notes when printing participant training manuals. I removed the conditional text, and everything is working fine. You may want to double check to make sure you don't have conditional text in your Word docs. I've uploaded an image with the code below to show how the conditional text looked when the document was linked and generated.
Check out the code below:
<table cellspacing="0">
          <tr>
                    <td style="vertical-align: top; padding-left: 0px; padding-top: 0px;
                               padding-right: 0px; padding-bottom: 0px;" height="800" width="114"><table
                               cellspacing="0" width="100%">
                              <tr>
                                        <td style="padding-left: 0px; padding-top: 0px; padding-right: 0px;
                                                   padding-bottom: 0px;"><div v:shape="Text_x0020_Box_x0020_146"
                                                                                                                         class="shape" style="padding: 3.6pt 7.2pt 3.6pt 7.2pt;">
                                                  <p class="WD_InstructorNotesHeading"><span style="background: #ffff00;">Instructor
                                                   Notes:</span></p>
                                                  <p class="WD_InstructorNotesText"><span style="background: #ffff00;">Add
                                                   any additional instructor information into this text
                                                   box.  It will only appear when hidden text
                                                   is turned on.</span></p>
                                                  <p class="WD_InstructorNotesText"> </p>
                                        </div></td>
                              </tr>
                    </table>
                     </td>
          </tr>
</table>
Cheers.

Need to generate "n" number of files if value of a field say "B" is "n"

Hi,
I have a Proxy to file scenario,where I need to generate "n" number of files if value of a field say "B" is "n".
My source structure is :
Source
   A
   B
   C
Source
How can I do it,all the rest field values will be same in the all the files ,except 1 filed which will increase from 1 to "n" from 1st file to last file.
Regards,
Sri
Edited by: sriparna on Feb 27, 2012 11:28 AM
Edited by: sriparna on Feb 27, 2012 11:28 AM
Edited by: sriparna on Feb 27, 2012 11:29 AM

Dear Sriparna
First step is to create a UDF (user defined function). Create One input and create two output varaibles for this UDF.
It will have two objectives
1. to create source node of the target message (output1_
2. to create the node B for the target side
As per your requirement you need to create the Source Node of the target message as per the value of B ( if 2 then two source nodes at target)
In the UDF take B as input
int b = B[0];
for(int i=0;i<b;i++)
output1.addValue(" "); //you need to map this out put with the source node of your target
output2.addValue(i+1); // this field should be mappoed with the field B of target
Hope this clears your confusion
@ gagan: for a requirement like this handling the logic in mapping is the right way to do, I dont think we should go for OS commands

I just read the tutorial and did exactly what it was telling me to do, and I still can't get it done. Once I have selected the file, I get a box that pops up that says "Subscribe now to convert unlimited number of files to PDFs. Subscribe Now. I already

I just watched the tutorial and did exactly what it was telling me to do, and I still can't get it done. Once I have selected the file, I get a box that pops up that says "Subscribe now to convert unlimited number of files to PDFs. Subscribe Now. I already have done this! I am a subscriber! Arrrrhhhgggg!

Hello Kathie,
Please let me know what exactly are you trying to do using Adobe online service.
You might try accessing the same service for some other PDFs and check.
Have you signed up correctly at "https://cloud.acrobat.com/" using your Adobe ID credentials.
If the same message pops up, then please visit Contact Customer Care as they could let you know if there is any problem with your account.
Hope to get your response.
regards,
Anubha

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
Joerg

Hi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

2009 macbook pro incorrect number of file hard links. repaired and still slow. I replaced the hard drive within the year and it's 1 tb not full. help!

I have a 2009 macbook pro and I keep it up to date. I replaced the hard drive with a new 1 tb hard drive within the last year. It is not even close to full. The other night I was doing a time machine backup and the spinning color wheel appeared. It would not go away and the only thing I could do was restart the computer. The Grey apple screen appeared and nothing else happens. I restarted in disk utility and verified the drive. It said "incorrect number of file hard links". I repaired it successfully and check the drive as well as the startup drive. All was ok. I restarted my computer and it took forever to come on. It is now one but I can not do anything. The desktop and all appropriate dock items are there but I can not do anything. What should I do?

It's likely that the startup drive, or some other hardware component, is failing. Back up all data immediately, then run Apple Diagnostics or the Apple Hardware Test.
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

WebHelp and Number of Files Generated

Similar Messages

Maybe you are looking for