Webhost failed to process a request-sharepoint 2013 found error in event viewer

I am getting following error everyday in event viewer,
My server has 4GB ram, 64bit, 2.26ghz processors.
error:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/64221192
Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/client.svc' cannot be activated due to an exception during compilation. The exception message is: Memory gates checking failed because the free memory (186724352 bytes)
is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment
config element.. ---> System.InsufficientMemoryException: Memory gates checking failed because the free memory (186724352 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve
this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element.
at System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
--- End of inner exception stack trace ---
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Process Name: w3wp
Process ID: 11320
Thanks,
Deepak patel

Add more memory to the host. 4GB is 4GB less than the minimum system requirements for SharePoint.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Error ID 3 WebHost failed to process a request.

We are getting the following error after installing the last 3 months Windows updates. No SharePoint updates or patches were applied.
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/34106743
Exception: System.ServiceModel.ServiceActivationException: The service '/98ffac32b3ca4fe1bd9955e19acd712f/ExcelService.asmx' cannot be activated due to an exception during compilation. The exception message is: Loading this assembly would produce
a different grant set from other instances. (Exception from HRESULT: 0x80131401). ---> System.IO.FileLoadException: Loading this assembly would produce a different grant set from other instances. (Exception from HRESULT: 0x80131401)
at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
--- End of inner exception stack trace ---
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)
Process Name: w3wp
Process ID: 6692

HI,This could be of many reasons.please check the link below for the most relevant solutions
http://expertsharepoint.blogspot.de/2014/10/loading-this-assembly-would-produce.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

WebHost failed to process a request

when i am connecting to Server Foundation provider in windows azure i am getting error.
WebHost failed to process a request.
Sender Information: System.ServiceModel.Activation.HostedHttpRequestAsyncResult/12036987
Exception: System.Web.HttpException (0x80004005): The service '/SC2012R2/Admin/Microsoft.Management.Odata.svc' does not exist. ---> System.ServiceModel.EndpointNotFoundException: The service '/SC2012R2/Admin/Microsoft.Management.Odata.svc' does not
exist.
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest()
at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest()
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result)
Process Name: w3wp
Process ID: 10000

Hi,
For this situation, you could refer to the following links for more information about this error message:
http://blogs.msdn.com/b/jimoneil/archive/2011/07/11/troubleshooting-endpoints-on-a-wcf-web-role.aspx
http://geekswithblogs.net/michaelstephenson/archive/2013/07/17/153435.aspx
And this issue is more related to the windows azure settings, so it's recommended that you could ask the issue in the Microsoft Azure Forum:
https://social.msdn.microsoft.com/forums/azure/en-US/home?category=windowsazureplatform%2Cazuremarketplace%2Cwindowsazureplatformctp
Regards

Visio - bug - The server failed to process the request

Hi
When uploading a visio diagram into one of our sharepoint document libraries we then get a 'The Server failed to process the Request' error when we then try and view the document in the Web Browser. Does anyone know how to fix this?
Thanks

I understand that this is an old thread. The following might be useful to other readers engaging this issue in the future.
I experienced the same error message when provisioning a new instance of the Visio Graphics Service application for a new farm. I first tested the approach presented by sjb500 and found that this approach did resolve the problem. I then
explored using a more limited permission approach. Over the course of several attempts, I eventually found that I only need map the application pool identity to the SPDataAccess role to resolve the problem:

An error has occurred: "Failed to process the request."

I try to make a deploy and this error appears:
[code]An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Product: null, Vendor: null, Version: null, Build ID: 6.3007.00.0000.20040726091658.0000 (release=630_VAL_REL, buildtime=2004-07-29:21:25:09[UTC], changelist=267691, host=PWDFM026), Build Date: Fri May 06 16:36:04 VET 2005
Web Dynpro code generators of DC local/PruebasEstilos:
SapDictionaryGenerationCore: 6.4014.00.0000.20050818151336.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:08:16[UTC], changelist=363802, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4014.00.0000.20050818152356.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:11:31[UTC], changelist=363818, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:18[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapGenerationFrameworkCore: 6.4014.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:01:32[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:15:40[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4014.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:05:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:26[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:16:08[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/progmodel/gci/IGCIComponentDelegate
Loader Info -
ClassLoader name: [local/PruebasEstilos]
Parent loader name: [Frame ClassLoader]
References:
   common:service:http;service:servlet_jsp
   service:ejb
   common:service:iiop;service:naming;service:p4;service:ts
   service:jmsconnector
   library:jsse
   library:servlet
   common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
   library:ejb20
   library:j2eeca
   library:jms
   library:opensql
   common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
   interface:resourcecontext_api
   interface:webservices
   interface:ejbserialization
   sap.com/tcwddispwda
   sap.com/tcwdcorecomp
   service:webdynpro
   service:sld
   library:tcddicddicservices
   library:com.sap.aii.proxy.framework
   library:tcgraphicsigs
   library:com.sap.mw.jco
   library:com.sap.lcr.api.cimclient
   library:sapxmltoolkit
   library:com.sap.aii.util.rb
   library:com.sap.util.monitor.jarm
   library:tcddicddicruntime
   library:com.sap.aii.util.xml
   library:tccolapi
   library:com.sap.aii.util.misc
   library:tc~cmi
   library:tccolruntime
Resources:
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\local\PruebasEstilos\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
The error occurred while trying to load "sap.wdp.InternalTest1".
     at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:328)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:40)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doInit(ClientComponent.java:775)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:329)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:356)
     at com.sap.tc.webdynpro.clientserver.task.Task.createApplication(Task.java:219)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:547)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:57)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:139)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:101)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:38)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
[/code]
I don't know what does it mean, I will appreciate it any helpfull information as soon as possible(urgent).
Tokio

Hi, Armin
In fact I'm using NWDS SP14 but I don't know what is the version of Web AS.
I was reading and posting few days ago some question about install and uninstall Web AS, J2EE Server, etc. I could do something but just when I' trying to deploy and run NWDS Application that error occurred.
Well, I supose in this case I have to install a new version of Web AS, from the "SDN Download Catalog" what I must to do? ...
In Download - Sneak Preview SAP NetWeaver page, what exactly I have to download to install:
<i>Download file 1 (1.9GB)
Download file 2 (1.9GB)
Download file 3 (.5GB)
Download file 4 (.8GB)</i> ?
Thanks for your help...
Tokio

404 Application Not Found:Failed to process the request

Hello
We are facing below dump issue on our SAP Netweaver CE EHP1 as Java system (DEV System). But its not coming frequently.
when refresh the url then loging screen coming again.
OS - Windows Server 2008 R2
Database - MS SQL Server 2008
404 Application Not Found SAP NetWeaver Application Server/Java AS
Failed to process the request: Request refers to an unknown session
Correction Hints
The request refers to a session that doesn't exist. Reasons might be one of the following: a) Wrong URL is used to request the application (i.e. there might be a typo in the URL). b) Request with wrong parameters is sent by the client (might also indicate an unfriendly attack). c) Request belongs to a session that expired already some time ago and is no longer traced on the server. If the problem persists, record the HTTP traffic to analyse the causing requests.
Note: The above hints are only a guess. They are automatically derived from the exception that occurred and therefore can't be guaranteed to address the original problem in all cases.

Hello Asish,
Could you please check the follwing link if it is helpful!!
http://wiki.sdn.sap.com/wiki/display/JSTSG/%28JSTSG%29%28Web%29Problems-P203
The requested resource does not exist

Add user Error 90:7019:Failed to process the request

Shared services 11.1.2
Does anyone have any information on this error? I can not find it anywhere?
90:7019:Failed to process the request.
It is encountered when adding a user to a group in shared services.
Thank you,

Apply Patch 9921096.

400 Session Not Found, Failed to process the request: Request refers to an unknown session.

Dear Team,
NW 7.3
SRM 7.02
We are facing the following error, whenever we try to "Transfer all" material from MDM catalog to SRM shopping cart.
400 Session Not Found
SAP NetWeaver Application Server/Java AS
Failed to process the request: Request refers to an unknown session
Entries in the Define External Web Services. as follows..
Please find the attached Java components list in "srm_components.txt" and the detailed error description in "MDM_400_error.txt" document.
Please help on this.
Regards
Amit...

Dear Experts,
Any suggestions ???
Regards
Amit...

PDFDocument Processor failed to process Render Request

Hi experts,
I am using GP of CE 7.1 SP05. I create a callable object and create a composite form. I create it from external xdp file. After I activate it and test it, it shows "PDFDocument Processor failed to process Render Request". What happened?
Best Regards
Tom

Hi Tom,
Seems to be an issue with your ADS configuration.
Please check it according to configuration guide.
Regards,
Arafat

PDFDocument Processor failed to process InputPDF Request.

Hi Experts,
My Adobe Forms application has been running without a hitch for some time already but suddenly this exception came up out of the blue.
PDFDocument Processor failed to process InputPDF Request.
I can't find anything on it here or in google. Could anybody enlighten me?
Cheers,
Alfonso

Hello, I really would like to help but you did not provide any information about your system and form application.
Please specify form name (if it is standard SAP form), specify type (online, offline, interactive, dynamic, printing etc.). Would be nice if you could provide few system changes made before the first occurence of the problem.
Have a nice day, Otto

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

Apple Developer Program Enrollment Big Warning We are unable to process your request. An unknown error occurred. Please try again.

I am trying to register as a developer in UK and it shows this:
Apple Developer Program Enrollment
We are unable to process your request.
An unknown error occurred. Please try again.
If i click in try again it takes me to company(i am an individual) and it does it again and again

I have this same issue. What's frustrating is it puts me in an endless loop. Says to contact them but when I click any contact link it cycles me back to the problem.
I can not access my developer account and do not know why and have no way to contact apple because ...looop... I can not access my developer account. Please help.
Thanks,
Darren

We are unable to process your request. An unknown error occurred. Please try again.

I'm this problem when try complete entrollment registration
We are unable to process your request.
An unknown error occurred. Please try again.

I have the same issue! , Please HELP US!!!

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

Webhost failed to process a request-sharepoint 2013 found error in event viewer

Similar Messages

Maybe you are looking for