WebID (x509 certificate) on Windows Server 2012

How can a (end) user log in to Windows Server 2012 using his WebID (x509 certificate)?

Hi,
I assume that you are talking about smart card logon, which makes it possible for user to logon using a smart card and a PIN (Personal Identification Number).
More information for you:
Set up a smart card for user logon
http://technet.microsoft.com/en-us/library/cc775842(v=WS.10).aspx
How to implement x.509 certificate-based windows logon and authentication
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0291dee1-1b10-4139-b36d-f1b953f8a09a/how-to-implement-x509-certificatebased-windows-logon-and-authentication?forum=winserversecurity
I hope this helps.
Amy Wang

Similar Messages

Install GoDaddy SSL Certificate to Windows Server 2012 - Access Anywhere

I would like to activate Access Anywhere on my windows server 2012 essentials. I went through the guided steps and purchased a SSL certificate from Godaddy. Godaddy doesn't offer support regarding the correct installation process of their certificates
using iis 8 (server 2012 essentials). I noticed that Access Anywhere requires a PFX certificate and Godaddy only provided a PKCS #7 and a cer. file. Please let me know if Godaddy's certificates are compatible with windows server 2012 essentials. Without Access
Anywhere functioning on my server, the usefulness of the server greatly decreases. Your assistance is greatly appreciated. Thanks.

All you need is the standard, lowest level, single domain, no email, no bells, no whistles, no UCC. Just a simple SSL cert. Even SBS standard which adds email to the RWA feature, only requires that, thanks to the magic of the dev. team.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit.

Windows server 2012 update standalone installer error: the certificate for the signer of the message is invalid

I have a windows server 2012 Hyper V machine which acts as a web front end for my sharepoint 2013 farm.
It is set to install updates automatically.
I have 4 patch to install to correct an issue with my search:
KB
2567680, KB
2554876 , KB
2708075 , KB
2472264
These are Microsoft patches
Whenever I try to install them I receive an error
Googling the error, I have tried extracting the file and using CMD prompt to install the xml file to install but to no avail.
I have installed Windows Identity Foundation as a role. It is necessary for this to be
I have also noticed that all updates for a couple of weeks have failed. I have 2 other servers in the farm, both of which are joined to the same private network cannot look for updates with another error. Not sure if these are related.
Anyone know of anything like this?
Thanks in advance

right-click the file and select properties.
On "Digital Signatures" the tab, select the "Microsoft Corporation" entry and click "Details"
In the "Digital Signature Details" dialog, click "View Certificate"
In the "Certificate" dialog, click "Install Certificate..."
In the "Certificate Import Wizard" dialog, select "Local Machine" (though current user might work, didn't use it, so I can not attest to it) and click "Next"
Select the "Place all certificates in the following store" option and click "Browse"
In the "Select Certificate Store" dialog, select "Trusted Publishers" and click "Ok"
Back in the "Certificate Import Wizard" click "Next"
You should now be at the "Completing the Certificate Import Wizard" step of the "Certificate Import Wizard" ... click "Finish"
You should get "Import was successful"
You should now be able to install the package.
gimme some slamming techno!!!!

Just FYI, new blog post "Windows Server 2012 Server Certificate Deployment Guide Now Available in TechNet Gallery"...

...At
http://gallery.technet.microsoft.com/Windows-Server-2012-Core-e0970aa7
James McIllece

Hi,
Thanks for your sharing, the guide will very helpful for the network deploy and troubleshooting!
Best regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ASA and RADUIS on Windows server 2012

hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i get this message "Error authentication rejected aaa failure"
Running Config
: Saved
ASA Version 9.1(3)
hostname NazcoFW
domain-name default.domain.invalid
enable password XgEKS9WizHnI9IUJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XgEKS9WizHnI9IUJ encrypted
names
interface Ethernet0/0
switchport access vlan 22
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 32
shutdown
interface Vlan1
nameif NAZCO
security-level 100
ddns update hostname OSI
dhcp client update dns server both
ip address 172.16.200.1 255.255.255.0
interface Vlan12
nameif outside4
security-level 0
ip address 172.16.4.254 255.255.255.0
interface Vlan22
nameif Outside20
security-level 0
ip address 172.16.20.254 255.255.255.0
boot system disk0:/asa913-k8.bin
ftp mode passive
dns domain-lookup NAZCO
dns server-group DefaultDNS
name-server 10.1.1.1
name-server 10.1.2.1
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network HP5220
host 10.10.10.105
object network ak20
host 10.10.10.110
object network hp5520
host 192.168.2.105
object network HP7000
host 192.168.2.106
object network HP5520
host 192.168.2.105
object network ak04
host 10.10.10.110
object network HP400
host 192.168.2.107
object network out04
range 192.168.2.200 192.168.2.220
object network AK04
host 10.10.10.110
object network oooo
subnet 10.10.10.0 255.255.255.0
object network 444
host 10.10.10.110
object network OSITOINT
subnet 10.10.10.0 255.255.255.0
object-group network OSItoOUT04
network-object object out04
access-list outside20_access_in extended permit icmp any4 any4
pager lines 24
logging enable
logging asdm-buffer-size 512
logging trap informational
logging asdm informational
logging host NAZCO 10.10.10.10 17/6161
logging debug-trace
logging permit-hostdown
mtu NAZCO 1500
mtu Outside20 1500
mtu outside4 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (NAZCO,outside4) source dynamic any interface dns
nat (NAZCO,Outside20) source dynamic any interface dns
route Outside20 0.0.0.0 0.0.0.0 172.16.20.1 1
route outside4 0.0.0.0 0.0.0.0 172.16.4.1 11
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 NAZCO
snmp-server host NAZCO 10.10.10.196 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity fru-insert
snmp-server enable traps remote-access session-threshold-exceeded
snmp-server enable traps connection-limit-reached
snmp-server enable traps cpu threshold rising
snmp-server enable traps ikev2 start stop
snmp-server enable traps nat packet-discard
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh scopy enable
ssh 172.16.200.0 255.255.255.0 NAZCO
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access NAZCO
dhcp-client update dns server both
dhcpd dns
dhcpd update dns both
dhcpd address 172.16.200.20-172.16.200.89 NAZCO
dhcpd dns 172.16.20.1 172.16.4.1 interface NAZCO
dhcpd lease 1048575 interface NAZCO
dhcpd update dns both interface NAZCO
dhcpd enable NAZCO
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username admin password bZmVDHuxUzzxS3yz encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
service call-home
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:357b7c6f861e8aa9bb3a3674a789b39b
: end
asdm image disk0:/asdm-721.bin
no asdm history enable

Hi
Looks like the AAA configuration is set for local
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
Change it to Radius
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
for example :
aaa authentication telnet console Keefa-Raduis LOCAL
Now when you will do telnet to using Radius credentials, Its Should work, If radius goes down you can use LOCAL username and password as fallback method.
Cheers!
Minakshi(Do rate the helpful post)

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

[Forum FAQ] Introduce Backup in Windows Server 2012 R2 Essentials

Windows Server 2012 R2 Essentials provides reliable ways to perform regular backups of your server and backups of your network computers.
1. Server Backup
Description:
Backs up your server running Windows Server Essentials. The data is backed up to an external USB drive. You can also perform full system restore of server.
Operations:
On Dashboard, please select DEVICES and then navigate to the server which you need to backup. Right click the server and select Set up backup. When set up complete, you will be able to
Start a backup for the server. (Figure 1)
Figure 1
More information:
Manage server backup in Windows Server Essentials
Restore or repair your server running Windows Server Essentials

3. Microsoft Azure Backup
Descriptions:
Performs an online backup of files or folders on your server. When you use Azure Backup to back up server data, the information is encrypted by using your passphrase before it is uploaded to a secure datacenter on the Internet.
Operations:
1) Open Dashboard and follow the path: HOME-> Get Started-> ADD-INS-> Integrate with Windows Azure Backup. Then as Figure 3 shows, you need to “Click to sign up for Windows Azure Backup” and “Click to download Windows Azure
Backup integration module”.
Figure 3
Please note: when you click to download, you may encounter the issue as Figure 4 shows. If so, please follow the path:
Tools-> Internet Options-> Security->
Trusted sites-> Add this website to the zone and add
http://downlaod.microsoft.com,
https://activedirectory.windowsazure.com in Trusted sites in IE. (Please uncheck
Require server verification (https:) for all sites in this zone). Then please check if you can download as normal.
Figure 4
2) After you download the OnlineBackupAddin, please run it. Then begin to install the add-in. (if any issue occurs in your installation of add-in, please navigate to C:\PrgramData\Microsoft\Windows Server\Logs folder and check
InstallAddin log file if you can find some clues.)
3) During your installation, KB 2873390 may be required. Please download the update package and run it. Then Windows Azure Backup Agent Upgrade Wizard appeared. Please follow it and complete as Figure 5
and Figure 6 show.
Figure 5
Figure 6
4) Then please re-open Dashboard, you will find ONLINE BACKUP option. (Figure 7) There will be three steps that you need to do: (i)
Upload a certificate. (ii) Register your server.
(iii) Configure backup settings.
Figure 7
(i). Upload a certificate. (In this example, we use the second option: Upload certificate to Windows Azure Backup vault)
Please logon Windows Azure, select RECOVERY SERVICES and click
NEW. Follow the path: RECOVERY SERVICES-> BACKUP VAULT->
QUICK CREATE. Please type NAME and select
REGION, then click CREATE VAULT. When create completes, please click the name of this new recovery service that you create. As Figure 8 shows. Then select Manage Certificate to add or update the certificate file (.cer) that contains
a public key for the vault. The certificate is used to register servers with the vault.
Figure 8
(ii). Register your server
On Dashboard, navigate to Online Backup and click Register. (Figure 9)
Figure 9
Then it will check the certificate. And then you need to set a passphrase to secure your data. (Figure 10)
Figure 10
When you set passphrase complete, please click Next to continue. When register successfully. You will see Figure 11.
Figure 11
(iii). Configure backup settings
When register completes, please click Configure Online Backup. Then you can follow the Configure Online Backup wizard to configure online backup (add folders), specify the backup schedule, specify the backup retention policy and choose bandwidth usage. The
all process will be shown in Figure 12-16.
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
After all configurations complete, you will be able to see that the server integrates with Windows Azure Backup. (Figure 17)
Figure 17
On the Dashboard in server essentials, you will be able to start backup online. (Figure 18)
Figure 18
After backup online, you will see the protected data as Figure 19 and Figure 20 show in Dashboard and Windows Azure.
Figure 19
Figure 20
More information:
Manage Online Backup in Windows Server Essentials

Migrating Certificate Services to Server 2012 in a 2008 R2 AD Domain

We have a Windows 2008 R2 SP1 Active Directory domain. Our Enterprise Certificate server is running on Windows 2003 R2. We'd like to introduce a Windows 2012 server into our existing domain and migrate the Certificate Services to that new box. Are there
any 'gotchas' to implementing Certificate Cervices on a Windows Server 2012 system in a Windows 2008 R2 SP1 domain that we should be concerned with?
Orange County District Attorney

Hi,
You can migrate Certificate Services to another server but server name should be same. Also changing the server name which has CA role installed is not recommended.
AD CS Migration: Preparing to Migrate
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
http://technet.microsoft.com/en-us/library/ee126102(v=ws.10).aspx
Also I would request to post this question in security forum :
http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads
Also you consider, Windows Server 2012 General forum :
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Server 2012 CA will not allow Windows XP to autoenroll

I have a Windows Server 2012 Domain Controller with an Enterprise root CA installed. I have created a client authentication certificate template (2003 compatible). Domain Computers have Read, Enroll and Autoenroll permissions. I modified
the Domain Policy to enable Certificate autoenrollment. I have two clients on the same subnet with the domain controller, one Windows 7 Ent SP1 and one Windows XP SP3. The problem: Windows 7 reboots, has client auth cert installed in computer's
personal cert store. The Windows XP machine cannot acquire the certificate. Event ID 13, source is AutoEnrollment, 0x80094011,The permissions on this certification authority do not allow the current user to enroll for certificates. Both machines
belong to the domain. Running gpudate /force on the XP machine generates an info event stating that the computer security policy has be applied successfully, then the autoenrollment error. I've setup autoenrollment dozens of times without any
problems. The only thing different in this environment is that the CA is installed on Server 2012. I could be something else, but the only real difference is Server 2012. There are no errors on the server. It is like the client just
cannot talk to the server at all, but it's getting its policy from that server.
Any ideas?

http://technet.microsoft.com/en-us/library/hh831373.aspx
What works differently?
Windows XP clients
will not be compatible with this higher security setting enabled by
default on a Windows Server 2012 CA. If necessary, you can lower the
security setting as previously described.
Try run this command:
certutil -setreg CA\InterfaceFlags +IF_ENFORCEENCRYPTICERTREQUEST
Restart the certification authority
net stop certsvc
net start certsvc
INFO FROM LINK:
What value does this change add?
The CA
enforces enhanced security in the requests that are sent to it. This
higher security level requires that the packets requesting a certificate
are encrypted, so they cannot be intercepted and read. Without this
setting enabled, anyone with access to the network can read packets sent
to and from the CA using a network analyzer. This means that
information could be exposed that might be considered a privacy
violation, such as the names of requesting users or machines, the types
of certificates for which they are enrolling, the public keys involved,
and so on. Within a forest or domain, leaking these data may not be a
concern for most organizations. However, if attackers gain access to the
network traffic, internal company structure and activity could be
gleaned, which could be used for more targeted social engineering or
phishing attacks.
The commands to enable the enhanced security
level of RPC_C_AUTHN_LEVEL_PKT on Windows Server® 2003,
Windows Server® 2003 R2, Windows Server® 2008, or Windows
Server 2008 R2 certification authorities are:
certutil -setreg CA\InterfaceFlags +IF_ENFORCEENCRYPTICERTREQUEST
Restart the certification authority
net stop certsvc
net start certsvc
If
you still have Windows XP client computers that need to request
certificates from a CA that has the setting enabled, you have two
options:

Domain computers can't runt RD Web applications when connected from outside company – Windows server 2012 R2

Hi Everyone,
I have a question related to RDweb service.
I have successfully installed RD web role on windows server 2012 R2.
All went ok. I also installed a valid third party certificate.
I can connect from outside to the server and run applications using any devices: Ipad’s, mobiles and laptops.
The problem is that: Any Computer/Laptop that is joined on the domain can connect to RDWEB from outside the company BUT CAN'T RUN ANY APPLICATIONS. The RD session is taking long time it failes.
Note that from inside the network is working.
What it can be?
Thank you in advance,
Criss

Hi,
The internet connection from where I’m doing the tests is quite good. I think the error with the latency is not relevant because probably the computerRD gateway it doesn’t allow it and that way it fails with this error. For a computer that never been joined
on the domain is working perfect no delay at all..
We are using RD Gateway … installed everything on the same machine Windows server 2012 R2.
When I click RemoteApp I see the remote the prompt of RD gateway, I click ok, then nothing happened for 2-3 min. after this time it brings the error with the delay.. OR “couldn’t connect on the remote computer because an error occurred on the remote
computer that you want to connect to.”
Again, the connection is failing ONLY when we try to connect from outside the company and it happened ONLY with the Computers that are joined on the Domain.
EX: An user (with Office Laptop - joined on domain) can connect to RD Gateway and lunch the RemoteApp’s from inside LAN but when is leaving Home can’t run the Remote App;s. In the meantime he can connect and run RemoteApp’s with his private computer.
What it can be different between the Office and his home private computer?
For Outside users we’ve have open only port 443 on firewall. Why need to open UPD 3391?
I’ve notice that if I take a laptop that is working and join it on the domain it will have the same issue. If will dis-join it will still have the same issue after all.
Thank You

Workflow Manager Configuration Issue Windows Server 2012 R2 / SQL 2014

Hello All,
Environment: SharePoint 2013 Enterprise with SP1
Farm consists of
2 App Server, 2 Web Server and 2 SQL Servers all the server have Windows 2012 R2
OS . The SQL backend is SQL Server 2014
Installed Workflow manager on the Web server, the configuration ran fine without any errors. Trying to browse the workflow management site via IIS Manager encountered Certificate Error clicked Continue to this website which gives a HTTP 403 Forbidden and
following detail message
This error (HTTP 403 Forbidden) means that Internet Explorer was able to connect to the website, but it does not have permission to view the webpage.
Checked the web site Workflow Management Site in the IIS manager which has only one folder bin . I was not able to submit the Screenshot
I have installed the latest patch for the Workflow manager and the Service Bus
Question I have
Should there be more folder under the Workflow Management Site.
Why is the Web site not showing the web page
Is workflow manager supported for Windows Server 2012 R2 and SQL 2014
Thanks
Dhanraj

Hi Dhanraj,
I captured the screenshot from my IIS Manager on workflow server. There is only bin folder under Workflow Management site
If I browser workflow host uri from IIS Manager
https://localhost:12290, I received certification error, and I chose the continue to this website, it returned me as follow:
From the link: http://support.microsoft.com/kb/2902007/en-us It is supported on Windows Server 2012 r2 if you have install latest update.
Here is an article which talks about error:
http://www.sp2013blog.com/Lists/Posts/Post.aspx?ID=36
In addition, here is the reference for troubleshooting workflow manager 1.0 management:
http://msdn.microsoft.com/en-us/library/jj193529(v=azure.10).aspx#AnalyzingWorkflowManagementLogs
You could also open SharePoint Designer 2013 and see if you could create a workflow on platform 2013.
Regards,
Rebecca Tu
TechNet Community Support

Set up a smart card for user logon to windows server 2012 R2

Good Evening,
I have Windows Server 2012 R2 Datacenter edition (dreamspark license)
Is it possible to successfully set up smart card logon to a server ? I already have the smart card reader, smart card and the certificate (which is also my digital signature) I know how to setup a DC role (as far as I know, the server has to be in a domain
to use smart card logon) I would like to logon using to my PC using a smart card and set the certificate I already have to use as a certificate for logon.
Kind Regards,
Tomasz

It would take a few things to do this, and could cause some security issues. In short, I assume the certificate you "already have" came from another environment or a commercial provider. You would need to configure your computer to trust that CA
to be an issuer of smart card authentication certificates. That effectively moves a good portion of your computer security control out of your environment. For many environments that is an unacceptable security risk.
If you dont have an Active Directory running, you will also need to make some accommodations to the standard guides. I dont believe there are any published guides on how to do this with a single server and third-party CAs.
Here are some references for generic smart card authentications. They are not 100% applicable to your need, so some interpretation is going to be needed.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Cannot start virtual machine on Windows Server 2012

Hello,
I have a weird problem and have been unable to find a solution to it after two days of searching. I have Windows Server 2012 host on IBM x3500M2 machine. I set up a hyper-v platform (added the role, configured the storage and network) and created two virtual
machines. Now when I try to start either one of these VMs, using the Hyper-V manager, it throws this error:
"machine name" could not initialize
Could not initialize machine remoting system. Error: Element not found. (0x80070490).
Could not find a usable certificate. Error: Element not found. (0x80070490)
In the event log there is a similar error with the event IDs: 3040, 12460, 12500.
I tried clearing up the certificate from vmm/personal folder to recreate it again but to no avail. I found few articles regarding a similar problem on Windows Server 2008R2 but from what I can see this problem mainly occurs with SCVMM...

Hi,
Please restart your server or restart VMMS service to check the result.
In addition, I searched the internet and found that someone with the same issue has solved it by removing a
certificate from my Trusted Root Certificate Authorities container. The certificate is a self-signed cert generated by Remote Desktop Gateway service.
Hope it helps.
Regards,
Yan Li
Cataleya Li
TechNet Community Support

Azure: Windows Server 2012 R2 Essentials, Anywhere access

Hi all,
I testing a Windows Server 2012 R2 Essentials server in Azure. But I can't find the answers on the follow questions:
When I configure Anywhere access, the Wizard asking to configure my domain. I own a public domain name, but can I use this domain name in Azure?
Do I need a certificate? Can I reach the Anywhere access website with my own domain name?
Thnx in advanced!

Im fairly sure i have setup my own domain name in an azure essentials VM.
Yes you will need a certificate for the correct functioning of Anywhere Access.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

WebID (x509 certificate) on Windows Server 2012

Similar Messages

Maybe you are looking for