Is there a way to create a circular field or guide in Acrobat?

I have a fillable field that needs to fit nicely in a circle (the field will be exposed through a circular die cut on the page before it. I would like to have a way for the user to see how the field will appear through this circle so they can break the lines accordingly. Is there a way to either create a non-rectangular field, or import a page from InDesign with a guide visible, but not printable that Acrobat would recognize?

Is there a way to either create a non-rectangular field,
No.
or import a page from InDesign with a guide visible, but not printable that Acrobat would recognize?
Yes. You can place this graphic on a a non-printing layer in ID and it should remain the same in Acrobat.

Similar Messages

Is there a way to create entry form/fields in Numbers.

Can anyone let me know if there's a way to create an entry form/field in Numbers. The idea would be to have already created a list of contacts, then at an event on an iPad, people can check off if that person is there and also enter new contact info. Thanks in advance.

Isnt this just a table? A list of people, with a check box field in the second column, followed by a few columns for contact info to be entered in?
Jason

Is there any way to create a circular buffer using the INSERT ARRAY function?

I saw the example using the REPLACE ARRAY function, but it uses too much CPU power on my laptop. I'm using it for a very sensitive application and saw that the INSERT ARRAY function used much less CPU power.
I am also not wiring the index on the INSERT ARRAY function so that whatever is read from the buffer is added to the array.
However, since it is not indexed, I don't know how to set the "write" index back to 0 when it reaches a certain sized array (ie 1000 elements). I was looking for an array property node, but couldn't figure out if one exists for the "current write index".
Can anyone help?
Thanks

I will try to answer this question to my best understanding. I apologize if I interpreted the question wrong.
You are using the "Insert Array" vi without wiring the index. By doing that, new elements will be added (appended) to the array.
If you just want to know the current index to stop your acquisition when the array reach certain amount of elements, then you can use the "Array Size" vi to keep track of the size of the growing array. Remember that Array Size = last index + 1 because the index start at zero.
A second option is that you may want to start over the array when it hits the maximum number of elements that you will allow. If that's the case, then you may want to re-initialize the array to a NULL state by stablishing a condition (for example, when the
size of the array is 1000, re-initialize). I provided an example attached to this message showing how this can be accomplished. In the example, an 1D array grows in size using the "Insert Array" vi and inserting a random number. When the array reach 4 elements, it is re-initialized. You can expand this example by saving the array first to a file or some other holder before re-initializing the array. The example is in LabVIEW 6.
Finally, if you want to replace the current values with new values, I think you do not have other choice but to use the "Replace Array" vi.
Hope this can be of help.
Regards;
Enrique Vargas
www.vartortech.com
Attachments:
array_example.vi ‏20 KB

Is there a way to create a text field that shows on all slides?

I'm trying to create a "Revised On" date field that can be shown on every slide. Or, do I just have to copy and paste on all slides?
Thanks in advance.
- Michael

use the master slides
view > show master slides
click on the master slide that has a tick mark
add a text box to master slide and any other objects that you want on every slide; enter text, then position, size and set colour
click on the normal slide and add other content that is to be seen on that slide only
adding new slides will use the background design

Is there a way to create auto fill fields in an excel spreadsheet from AB?

Hey, so I've got an Excel spreadsheet that I'd like to tweak so when I enter a name, the boxes next to it labeled Phone Number and Email will auto fill the information in from Address Book. I don't know if this is possible in Excel, I have a Address Label Widget that does it though.

Being Applescriptable, you should be able to do that in Excel. MacTech magazine has a long article on applescripting Office. You might ask around in the Applescript forums or take a look at Macscripter.net.

Is there a way to create a year at a glance with detail and print?

Is there a way to create a year at a glance with detail and print?

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content?

Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content? By anyone, I mean someone who can download and use the free Adobe Reader, on either a Mac or PC. I have Acrobat Pro, and would like to be able to create forms that can not only be filled out and printed, but saved and emailed, which is not an option with the forms I have created to date. They can be filled out, but not saved, with Adobe Reader.
TIA,
Nancy

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Is there a way to create a local package repository

Is there a way to create a local package repository without technically being a mirror. For example, setting up multiple AL box's on my network and having them grab all the latest packages from one AL box?
Thanks,
Craig

What you most likely want is an ABS tree of your own, containing only the PKGBUILDs of those packages which you want to be included in your repository.
You should already have heard of the gensync program. In short, the parameters are the root of PKGBUILDs, sorted in subdirectories (ie. like the ABS tree), the intented name and location of the repository database file, and the directory containing the binary packages.
Let's assume you downloaded the current ABS tree to your hard drive, as well as all matching (same version as in the PKGBUILDs!) packages from a mirror, but you don't want the reiserfsprogs package in your repository. To achieve that, you must remove the /var/abs/base/reiserfsprogs directory, and may optionally remove the binary package, too. Since gensync analyzes the ABS tree you supplied as a parameter, removing the subdirectory of a specific package will cause this very package to not be included in the generated database. Assuming your packages lie in /home/arch/i686/current, your gensync call would look like this:
gensync /var/abs /home/arch/i686/current/current.db.tar.gz /home/arch/i686/current
If there are any discrepancies like
- PKGBUILD, but no matching binary package found
- PKGBUILD and binary package versions do not match
- permission problems (writing the db file must be possible)
gensync will gladly complain.
Otherwise you should find the db file in the place you specified. Keep in mind that the name of the db.tar.gz file must be equal to the repository tag in the pacman.conf to use the repo.
To make sure the db contains the right packages; use
tar -tzf current.db.tar.gz | less
to list the contents. Every package has it's own subdirectory including the metadata, which is rather obvious considering the file's generated from such a structure in the first place.
The binary packages along with a correctly generated db file are all you need. Make the repository directory containing these files available through FTP if local availability doesn't cut it for you, edit your pacman.conf if needed, and use it!
Adding packages works similar; All you need to have is the PKGBUILD in an ABS-like tree (it doesn't have to be the official tree; gensync doesn't care where the files come from. Just stick to one subdirectory per PKGBUILD, and you'll be fine), and the matching packages somewhere else, run gensync with the appropriate directories, and cackle with glee.
HTH.

Is there a way to create a collection based on the "previous import"?

is there a way to create a collection based on the "previous import"? that would make it easy to mobile sync the last import to my ipad, and do further picking/rejecting while away from my laptop.

well, yes, of course i could do it that way. i guess i wasn't specific enough. is there a way to create a smart collection, with the photos in the "previous import" as members of the smart collection. earlier i mentioned about using this smart collection to mobile sync with my ipad, to do further flagging.
so my intention, use a smart collection to mobile sync with my ipad, and the smart collection to include the photos from my previous import.
i guess another way to ask the question, is there a way to create a smart collection, by using some rule or condition in the smart collection, to automatically include previous import photos.
the documentation says that "previous import" is a collection, even though it shows up in the catalogue side bar section. but i see no way to choose that collection when making a smart collection.
jd

Is there a way to create a playlist from the now playing screen on ios7?

Is there a way to create a playlist from the now playing screen on ios7? I want to be able to hear a song in my collection and immediately add it to an existing playlist or create a new playlist.
Thank you in advance

Hi Cornellius,
From the now playing screen there's a Create button at the bottom that allows you to create a
Genius Playlist
New Station form Artist
New Station from Song
IPhone Help, Browse and play
http://help.apple.com/iphone/7/#/iph3cf21a82
The Now Playing screen provides playback controls and shows you what’s playing.
For information on Genius Playlists, see
Archived - Genius for iPod and iPhone
http://support.apple.com/kb/HT2978
I don't see an option to add it to an existing playlist.
Best Regards,
Nubz

Is there a way to create user logins or some other way to ...

Is there a way to create user logins or some other grouping for a set of applications to use (memory) resources optimally -- for example only mail and Safari and Word in one grouping and another for Safari and an audio recording application, etc.?

It is possible to use Parenal Controls to limit which applications can be used be a particular user account.
But it's not really necessary as far as managing memory.
Matt

Is there a way to create three different physical calendars in ical so that I can get a fiscal view of the calendars?

Is there a way to create three physically different calendars in iCal so that I can view the calendar and events from a fical point of view?

iCal just shows the calendars you have created in your account(s). So if you are using iCloud just log into your iCloud account in a web browser and make as many new calendars as you wish to have. Then enable those in iCal.
If you use Google accounts or something else for the calendars, then create them as needed, and enable them in iCal.
I have several separate calendars all displayed in iCal - a couple linked through my Gmail accounts, and one through my iCloud account. Each uses a different default item color so they are distinct in iCal.

Is there a way to create scripts to use tmconfig...

Is there a way to create a script to execute tmconfig and change CLOPTS parameters
for a particular server?
Here is what I would like to accomplish. Want to set "-r" option to a limited
number of servers, on an as needed basis. I do not want to bring down the environment
and update the ubbconfig file. The support people are not familiar with tmconfig.
So, I would like to create a script to turn the "-r" option on when needed and
restart only those servers and then turn it off once the debufgging is done.
Is there any command other than tmconfig, which I could use to accomplish this?
James

If you've got perl on your machine, you can download the tuxedo perl module and
write perl scripts to call tuxedo services. There's also a tuxedo::admin module
at cpan now.
"james mathew" <[email protected]> wrote:
>
I am sorry Roopesh. ud worked with the command 'ud32 with -Ctpsysadm
-Utpsysadm
first time when I tried, I used our tuxedo admin id instead of 'tpsysadm'.
When
tried with 'tpsysadm' it worked.
Thanks a lot.
James
"james mathew" <[email protected]> wrote:
I tried the options, but didn't help. By the way, I cannot find anydescription
on "-C" option in the reference guide.
I tried to use a client program, similar to ud, which is developed locally
to
test the services.
When I send request to '.TMIB' service, the client never gets any reply
back.
The input userd is
service_name .TMIB
TA_OPERATION GET
TA_CLASS T_SERVER
In the ULOG, I see the following error messages.
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTMIB_CAT:133: ERROR: Fielded buffer
access
error 2
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTUX_CAT:6031: ERROR: Unable topre-process
buffer before tranmission. Error code(12/3474)
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTUX_CAT:1286: ERROR: tpreturn could
not send
reply TPESYSTEM - internal system error
I have FIELDTBLS include 'tpadm' and FLDTBLDIR include '%TUXDIR%\udataobj'
What is causing the above errors.
"roopesh" <[email protected]> wrote:
run ud32 with -Ctpsysadm -Utpsysadm .
"james mathew" <[email protected]> wrote:
Thanks Sccott. Using ud32 is what I should do.
Now, I have a problem in using ud32 because the environment uses user
authentication.
I am not able to use ud32 due to logon failures. I am getting LIBTUX_CAT
errors
6311, 6247 and 6234.
I do not know what value am I supposed to provide for "application
specific
authentication
data". I think the environment variable TPIDATA stands for the samething.
Any help is appreciated.
Regards
james
Scott Orshan <[email protected]> wrote:
For scripting, you should use ud32 to call the MIB.
james mathew wrote:
Is there a way to create a script to execute tmconfig and change
CLOPTS
parameters
for a particular server?
Here is what I would like to accomplish. Want to set "-r" option
to
a limited
number of servers, on an as needed basis. I do not want to bring
down
the environment
and update the ubbconfig file. The support people are not familiarwith tmconfig.
So, I would like to create a script to turn the "-r" option on
when
needed and
restart only those servers and then turn it off once the debufggingis done.
Is there any command other than tmconfig, which I could use to
accomplish
this?
James

Is there a way to create a button that links to a website?

Is there a way to create a button that links to a website?
I was reading up that it's possible to this with menus, and tracks but can you do it with a button and how?
I am hoping to create a button that people viewing my discs on a computer can click on the link and their web browser will pop up and take them to a website.
Any help is appreciated.
Thanks.
-Fraky

dvd@ccess questions are being asked once a week on this forum, so I'll repeat why it's useless:
- Mac users have to enable the feature in the preferences of DVD Player in order to for the links to work.
- PC users have to install a small application on their PC, and they have to reboot the PC in order for the links to work.
- On top of this, it's still unreliable, and may not work on some computers.
It's a dog: Don't use it.

Is there a way to create a password protected folder for pictures or lock the photos app? For Ipad Air and Iphone 5s.

Is there a way to create a password protected folder for pictures or lock the photos app? I want to do this for Ipad air and Iphone 5s. I have other family members that use my Ipad and Iphone and do not want some pictures to be able to be viewed.
Thanks

Use 3rd party apps like Photo Manager Pro.

Is there a way to create a circular field or guide in Acrobat?

Similar Messages

Maybe you are looking for