WebLogic 10.3.6 - NodeManager automatically setting trustKeystore to DemoTrust

Hi,
We've configured our managed servers to use custom trust and identity keystores. But found that after making the change via admin console, and restarting the servers,
<Apr 23, 2015 11:44:55 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Apr 23, 2015 11:45:11 AM CDT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Apr 23, 2015 11:45:12 AM CDT> <Critical> <Security> <BEA-090174> <The trust keystore configuration specified on the command line or in boot.properties does not match the trust keystore configuration specified in config.xml.>
<Apr 23, 2015 11:45:12 AM CDT> <Alert> <Security> <BEA-090717> <Invalid server server1 SSL configuration>
<Apr 23, 2015 11:45:12 AM CDT> <Error> <WebLogicServer> <BEA-000297> <Inconsistent security configuration, weblogic.management.configuration.ConfigurationException: Invalid server server1 SSL configuration>
<Apr 23, 2015 11:45:12 AM CDT> <Emergency> <Security> <BEA-090034> <Not listening for SSL, java.io.IOException: Invalid server server1 SSL configuration.>
The problem is that NodeManager creates the $DOMAIN_HOME/servers/server1/data/nodemanager/boot.properties file with the option "TrustKeyStore"  set to "DemoTrust".
$ cat server1/data/nodemanager/boot.properties
#Thu Apr 23 11:43:23 CDT 2015
TrustKeyStore=DemoTrust
password=*************
username=************
But we can see that the configuration on the config.xml file is correct:
<key-stores>CustomIdentityAndCustomTrust</key-stores><custom-identity-key-store-file-name>/home/oracle/appIdentity.jks</custom-identity-key-store-file-name><custom-identity-key-store-type>jks</custom-identity-key-store-type><custom-identity-key-store-pass-phrase-encrypted>********</custom-identity-key-store-pass-phrase-encrypted><custom-trust-key-store-file-name>/home/oracle/appTrust.jks</custom-trust-key-store-file-name><custom-trust-key-store-type>jks</custom-trust-key-store-type><custom-trust-key-store-pass-phrase-encrypted>**************</custom-trust-key-store-pass-phrase-encrypted>
We've tried deleting the managed server directory, restarting nodemanager, restarting the entire domain, but always encounter the same problem. Does anybody know how to solve this problem?
After some investigation we found that there's a 6-years old thread that was never answered:
NodeManager auto updates boot.properties, injects DemoTrust for SSL, why?
Regards,
Franco.

Hi,
I did remove the entry and restarted the managed server, but nodemanager added the option again.
Regarding startup.properties, it doesn't have any ssl configuration:
Server startup properties
#Fri Apr 24 11:54:54 CDT 2015
Arguments=-Xms1024m -Xmx1024m -XX\:UseConcMarkSweepGC -Djava.net.perferIPv4Stack\=false -Dweblogic.ssl.JSSEEnabled\=false
SSLArguments=-Dweblogic.security.SSL.ignoreHostnameVerification\=false -Dweblogic.ReverseDNSAllowed\=false
RestartMax=2
RestartDelaySeconds=0
RestartInterval=3600
AdminURL=http\://wlserver\:7001
AutoRestart=true
AutoKillIfFailed=false

Similar Messages

  • I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

    I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
    At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

    iCloud isn't syncing them on your phone.  You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone.  You can do this with Gmail, Yahoo and other IMAP account.  iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
    iCloud didnt' set up a non-iCloud account on your Mac.  When you check Mail in System Preferences>iCloud, it only creates an iCloud email account.  You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar.  If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

  • REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

    Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
    Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
    Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
    documents which contain some of their pages in landscape orientation.
    publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
    documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
    Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
    Thank you in advance.
    Message was edited by: George Notaras
    Improved descriptions of example documents.

    To add to this, if you prefer you can separate your JavaScript from your JSF pages.
    Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
    Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
    You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
    (This can also be a URI reference to a JavaScript file hosted on a web server)
    <f:facet name="metaContainer">
      <af:resource source="/js/myJsFile.js" type="javascript"/>
    </f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
    It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
    A solution is to use <trh:script>.
    Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
    then in place of the above code use:
    <f:facet name="metaContainer">
      <trh:script id="script1" source="/js/myJsFile.js"/>
    </f:facet>Now after a page submit the JavaScript still functions.
    Edited by: Matthew Carrigy on 12/08/2009 10:39

  • Can i automatically set the timestamp of a file based on part of its filename?

    I have a bunch of files (approx. 500) with the same name pattern, that is : name_CreationDate.pdf. For instance: invoice015_2013_06_25.pdf or invitation035_2012_11_30.pdf. The last 10 digits are always the creation date. The original timestamps of the files have been messed up by a batch application which set them all to the same day; therefore they mean nothing anymore.
    Is there a way to automatically set the timestamp (for instance the "Creation Date" one) to the date indicated in the filename? I was thinking of Automator or some kind of shareware/freeware. Does anyone of you have an idea about this? Ideally as a batch rather than individually.
    Thanks,

    Thank you for your script. I made a test based on your script:
    a) I copied a PDF file on my desktop and named it "URSAFF 1er trim 2012_1998_09_19.pdf". The date component I want to set ultimately is therefore 1998_09_19.
    b) I created a service in Automator and pasted your script in a "Run a Shell Script" command. I added the Get Specified Finder Items at the beginning to be able to test the script on the file from Automator. (See screen shot of Automator below)
    c) The script appears to run successfully but I don't see a change in the timestamps of the file after I display Get Info from the Finder. (See screen shot of Get Info after I run the shell script)
    I wonder if my Region settings (I am based in France) do not interfere with the date/time string layout compatible with touch in your script. Just in case, I have added a capture of these settings.

  • Automatically set date and time in PDF file

    Good Day to all
    I use LiveCycle to create a PDF template so my users can fill up reports with out printing, the problem is the "time/date" field changes every time the supervisor open the file, so there is no way to track the date the report was created.
    I'm looking for a way (any trick) to make the automatically set but only when I save the document instead when I open it, I hope I'm explaining myself.
    Or maybe I just need to use another software, if you can recomend me one, or a trial just to be sure is the one I need.
    Any help would be great!!!...
    Thanks!!!

    You probably might have placed the code to populate the Data/ time value on the initialize event. Before you assign the current system date, check if the field has a value already. If it has then do not assign a new value.
    Thanks
    Srini

  • Is there a way to make it automatically set the ouputs of new tracks to Bus 5? (or something other than Stereo Out?)

    When I add a new track, it is automatically set to Stereo Out, is there a way to make it automatically set to Bus 5?  I use a mix that sends everything through busses and every time I add a track it seems I have to adjust this.
    Thanks

    ...and/or setup one or more tracks the way you want.. and then create/save a template and load that when you want to start a new project...
    You can even have Logic (via it's Startup preferences) autoload that template every time you start a new project... by choosing your template as the default one.
    See this page in the User Guide for more info

  • Payment Block Status automatically set 'Y' in FBV2

    Hi Team,
                 My requirement is this,   when user want to post document by T Code  FBv2 or MIR4 
                 if user stands on 25 to month end date. means  system date check then
    Payment block automatically set to 'Y' (month end posting).
    for this one i used many BADI and FM but not working as of now.
    one BADI i used as FAGL_SET_DOC   in debugg mode its updating the that fields value
    as its technicsl field name is  ZLSPR  whic i set  to 'Y'
    its working fine in debugg mode , but when we again check for that Document no then that filed's value is not populating as required.
    So please suggest me how can i set Payment block status to 'Y' as month end posting.
    Thanks
    Vivek

    hi Hiriyapapa,
                       I used BADI    FAGL_SET_BADI for our field update
    method is CHANGE_SEGMENT_PSEGMENT
    there i put code as below
    TYPES:  BEGIN OF TY_EKPO,
               EBELN TYPE EBELN,
               EBELP TYPE EBELP,
               PSTYP TYPE PSTYP,
               END   OF TY_EKPO.
       DATA : IT_EKPO TYPE TABLE OF TY_EKPO,
              WA_EKPO TYPE          TY_EKPO.
       DATA: WA_ACCIT TYPE ACCIT,
             L_TABIX  TYPE SY-TABIX.
       IF SY-TCODE = 'MIR4' OR SY-TCODE = 'FBV2'." OR sy-tcode = 'ZTR_SEG_RECLASS_REV' .  "Tcode for Netting Counter wise and Segment Reclassification
         BREAK 51393182.
         SELECT EBELN
                EBELP
                PSTYP
                FROM EKPO INTO TABLE IT_EKPO
                FOR ALL ENTRIES IN CT_ACCIT
                WHERE EBELN EQ CT_ACCIT-EBELN
                AND   EBELP EQ CT_ACCIT-EBELP.
         IF SY-SUBRC = 0.
           LOOP AT IT_EKPO INTO WA_EKPO .
    *          <--Begin of Change by Ashutosh Mishra     27-june-14 HRDK950590
             IF WA_EKPO-PSTYP = '9'.    ."BREAK 51393182.
               LOOP AT CT_ACCIT INTO WA_ACCIT.
    *         if WA_ACCIT-EBELN is NOT INITIAL.
                 IF SY-DATUM+6(2) EQ '25' OR  SY-DATUM+6(2) EQ '26' OR  SY-DATUM+6(2) EQ '27'
                 OR SY-DATUM+6(2) EQ '28' OR SY-DATUM+6(2) EQ '29' OR SY-DATUM+6(2) EQ '30'
                 OR SY-DATUM+6(2) EQ '31'.
                   WA_ACCIT-ZLSPR = 'Y'.      "SET Y PAYMENT BLOCK STATUS
                   MODIFY CT_ACCIT FROM WA_ACCIT TRANSPORTING ZLSPR.
                   CLEAR : WA_ACCIT.
                 ENDIF."endif.
               ENDLOOP.
             ENDIF.
           ENDLOOP.
         ENDIF.
       ENDIF.
    ENDMETHOD.
    in debug mode its working fine its updating as i want , but when we out of debug its not updating that fields status.
    I request to you please suggest me for this issue.
    Regard
    Vivek

  • Automatically Setting Date and Time - How often does it occur?

    Can anyone tell me exactly when Mac OS X retrieves the date and time from Apple's time server? Quite often, the time on my Mac is several seconds out from the correct time. When I open the "Date and Time Preferences", it seems to sync up with the correct time and everything is good.
    Is there any way to schedule when Mac OS X automatically sets the time, or how frequently over the course of a day it sets the time? Or, alternatively, does anyone know of a utility that I can use to accomplish this?
    Thanks in advance for any help you can give me.
    iMac 1.83 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    Hi Barry,
    Thanks for your reply.
    I have a wristwatch that receives a radio signal which transmits the correct date and time from an atomic clock in Fort Boulder, Colorado. The watch automatically picks up this signal three times a day (in the early morning so as to get the correct time once we go on/off DST) and sets my watch to it. So my watch is always accurate (so long as it can receive this signal). I have an alarm clock that uses the same principle. It's actually kinda nice...I can look at my watch and KNOW I have the right time!
    At any rate, that's how I know my Mac's clock is out a few seconds...I just check it to my watch.
    The real reason I would like to be able to schedule this function (or, at least have it occur more often) is so my Palm TX gets the correct time from my Mac each morning. I automatically sync it to my Mac every morning, and one of the conduits actually synchronizes the Palm clock to the one on my Mac.
    I'm just curious to find out when exactly Mac OS X sets the clock. Does it happen once a day? Once a week? I haven't had my Mac for all that long, so I do not know what will happen when we go off DST this spring. Will OS X (based on the date) just bump up its clock by one hour, or will it actually get the correct time from Apple's time server and sync the Mac clock to it?
    And, if there's no way the change when this happens or the frequency with which it occurs, is there anyone out there who has written a utility which can do this?
    What about Automator? I'm new to the Mac world, so I am just learning about all this stuff. When I open the Date and Time System Preferences, the clock seems to sync up at that point. Could I use Automator to do this?
    As always, any help would be most appreciated.
    Thanks again for your reply, Barry!

  • Automatically setting date and time

    Is there any way to automatically set the date and time on an iPod Touch? I don't think so, but I thought maybe there was a third-party app or some other work around to do this. I don't see why this isn't built into the OS. I know the iPhone can do this by getting time information from the cellular network, but why cannot this be done also over a wireless network? My computer can connect to a time server over the internet.

    Hi Barry,
    Thanks for your reply.
    I have a wristwatch that receives a radio signal which transmits the correct date and time from an atomic clock in Fort Boulder, Colorado. The watch automatically picks up this signal three times a day (in the early morning so as to get the correct time once we go on/off DST) and sets my watch to it. So my watch is always accurate (so long as it can receive this signal). I have an alarm clock that uses the same principle. It's actually kinda nice...I can look at my watch and KNOW I have the right time!
    At any rate, that's how I know my Mac's clock is out a few seconds...I just check it to my watch.
    The real reason I would like to be able to schedule this function (or, at least have it occur more often) is so my Palm TX gets the correct time from my Mac each morning. I automatically sync it to my Mac every morning, and one of the conduits actually synchronizes the Palm clock to the one on my Mac.
    I'm just curious to find out when exactly Mac OS X sets the clock. Does it happen once a day? Once a week? I haven't had my Mac for all that long, so I do not know what will happen when we go off DST this spring. Will OS X (based on the date) just bump up its clock by one hour, or will it actually get the correct time from Apple's time server and sync the Mac clock to it?
    And, if there's no way the change when this happens or the frequency with which it occurs, is there anyone out there who has written a utility which can do this?
    What about Automator? I'm new to the Mac world, so I am just learning about all this stuff. When I open the Date and Time System Preferences, the clock seems to sync up at that point. Could I use Automator to do this?
    As always, any help would be most appreciated.
    Thanks again for your reply, Barry!

  • How do I make Mail automatically set the reciepient of an E-Mail as the replying E-Mail-Adress

    Hi!
    I have an @me.com iCloud E-Mail-Adress with 2 Aliases
    I'm using one of them for students of my tutorial at the university, so that they can contact me without knowing my actual email-adress.
    so when someone of them sends me a message to this tutorial-alias and a write an answer, i always have to set the replying email adress
    from my actual @me.com to the tutorial-alias.
    I often forget to do this, so in the replying email people see my actual one instead of the alias, answer on it again, and everybody starts using both.
    I want to prevent this, so ist there a way to automatically set the replying adress to the one the former email im replying on was sent to?
    Regards
    DaNylz

    Mail Preferences:
    It works with accounts; I've never tried it with aliases but you may be lucky. Presumably from what you say they already appear in the drop-down menu when composing.

  • Is it possible to change the automatically set image on the new iMovie Theater title screen?

    I made a few movies on the new iMovies 2013 then uploaded into iTheater. I love the software and its ease of use. However, I noticed iTheater automatically sets the title image. Similar to youtube, iTheater probably uses the video mid point image as default. Is it possible to change the set image on iTheater?

    Unfortunately, no.

  • Alarm is automatically set when I enter a new appointment i n the calendar Treo 680

    When I enter a new appointment in the handheld an alarm is automatically set and I have to disable it manually.  This doesn't happen when I enter a new appointment on the computer.  I called Palm and they told me that the Treo 680 default mode was to automatically set the alarm and there was nothing I could do.  THIS IS VERY ANNOYING.  Anyway I can disable this so I am able to set alarms only when I want to?
    Post relates to: Treo 600 (Sprint)

    I've looked for a means of setting default lead times for calendar event alarms, and I've not found any. So, I don't think you can set a default of being off, either.
    When I had my old Sony Clié NR70V with the Palm O/S, under the Calendar application's (they called it Date Book) Preferences, it had an "Alarm Preset" option. You could check or uncheck it, and set a number, 0-99, and select Minutes, Hours or Days.
    Look under the "i" information Icon under the Calendar application's Preferences area. Note that it says: "When available, checking Alarm Presets sets an alarm for every new event, including....."
    You use to be able to set the number of times and how often you would be reminded for alarmed events, too, as is indicated there.
    Why have they crippled our O/S in several ways? Third party software sales? It doesn't make sense to me.
    We are going backwards.
    Good luck.
    Never, under any circumstances, take a sleeping pill and a laxative on the same night.
    Post relates to: Treo 680 (Cingular)
    Post relates to: Treo 680 (Cingular)
    Message Edited by Sick_Puppy on 08-28-2008 07:54 PM

  • How to deselect "automatically set up account" in Mail?

    I have a new Mac book Pro OS X v. 10.6.7 and I don't have the option to deselect "automatically set up account" when I set up a new account in Mail. I have therefore not the option to say which type of account I want: IMAP, POP, etc. On my old MacBook this option was available.
    Does anyone have an idea how I can still deselect this option so I can choose the type of account I really wish to have?
    Thank you for any tip

    Storminator from Lint wrote:
    hello,
    Changing from PC to Mac is a tough cookie! ...pfft...
    Anyhow, I also have the same issue as described above, only that the so called "option" button does not appear on my screen. Result: i don't seem to be able to select this IMAP.
    Any advice would be welcome (...have googled for some time, but also there: no clear indication on how to get around this issue)
    best regards,
    The Option Key
    Is right .............here, in between control and command

  • How to automatically set Print Scaling to 'None'

    Is there any way to automatically set print scaling to 'none' on an existing PDF document?
    This setting is set manually by going to File > Properties, and then going to the 'Advanced' tab and changing the 'Page Scaling' preference from 'Default' to 'None'. This preference can then be saved with the document.
    There seems to be no way to do this via javascript but if anyone has found a way to automate this that would be great!!!
    Ideally I want to run this as a batch process across a number of PDFs. Maybe as a last resort there is a way to do this using "execMenuItem"????
    Many thanks in advance for your help!!!!
    HJ

    Would something along these lines would work???
    "if printing 1:1 is critical, my recommendation would
    be to have an area on the page(s) for which scaling must be performed
    where you explicitly state the requirement for no scaling AND in which
    you place an line of known length, let's say an inch or a centimeter with
    text that warns that if that line is not exactly at the size specified,
    to reprint without scaling."
    (extract from post at: http://lists.frameusers.com/pipermail/framers/2008-March/011530.html)

  • Airport "Automatic" Setting

    Hi folks. Question about automatic setting for my MacBook.
    How do I get it to work if I have multiple WiFi networks that take different TCP/IP settings? I only want preferred networks.
    Location 1: DHCP
    Location 2: Manually (forced DHCP IP)
    Location 3: DHCP
    The second one (my office network) is the one that seems to have current issues using automatic.
    Any ideas welcome.

    Create a 'Location' for each network. Then you can easily select the Location that you need.
    KB 106653, Using network locations in Mac OS X

Maybe you are looking for