Weblogic 6.1 and 7.0 EJB interoperability

Are WebLogic 6.1 and 7.0 EJBs interoperable? Can a client EJB on 6.1
call another EJB on 7.0 and vice versa?
Weblogic 5.1 and 6.0 were not interoperable. Interoperability was
achieved with versions 5.1 sp12 and 6.1 sp 3.
http://e-docs.bea.com/wls/docs61/interop/interop.html
--Janne.

Hi Janne,
You may want to check this link:
http://e-docs.bea.com/wls/docs70/compatibility/compatibility.html
"janne" <[email protected]> wrote in message
news:[email protected]..
Are WebLogic 6.1 and 7.0 EJBs interoperable? Can a client EJB on 6.1
call another EJB on 7.0 and vice versa?
Weblogic 5.1 and 6.0 were not interoperable. Interoperability was
achieved with versions 5.1 sp12 and 6.1 sp 3.
http://e-docs.bea.com/wls/docs61/interop/interop.html
Regards,
Slava Imeshev

Similar Messages

Weblogic 6.1 and JVM 1.4 on Solaris

I know this combination is not officially supported, but I would like to be
able to try it in a test system for comparative purposes.
I saw a previous mail on this subject indicating it was possible (reproduced
below). I tried creating the Solaris equivalent of the file as
/usr/j2sdk1.4.0/jre/lib/security/login.config with the contents:
ServerLoginModule {
com.sun.security.auth.module.UnixLoginModule required debug=true;
This made no difference to the output (also reproduced below)
I have two questions:
- Have I done something wrong (file owner/permissions?) or is there
something else I need to do to make this work?
- Is there anywhere else I can place this file - on the CLASSPATH perhaps -
I tried this a bit but I didn't get anywhere.
Thanks,.
Roger Broadbent
Technical Consultant
Wilco International Ltd
From: "dominik" <[email protected]>
Sender: "dominik" <[email protected]>
Reply-To: "dominik" <[email protected]>
Subject: Re: Support for JDK 1.4 -> works on Suse 7.2 & 7.3
Newsgroups: weblogic.support.install
X-User-Info: 80.254.173.142
References: <[email protected]> <[email protected]>
NNTP-Posting-Host: 80.254.173.142
X-Original-NNTP-Posting-Host: 80.254.173.142
Message-ID: <[email protected]>
Date: 7 Apr 2002 03:19:19 -0800
X-Trace: newsgroups.bea.com 1018174759 80.254.173.142 (7 Apr 2002
03:19:19 -0800)
Organization: BEA SYSTEMS Inc
Lines: 42
XPident: Unknown
Hi
It works for me on Suse Linux 7.2 & 7.3 with JDK
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0-b92)
Java HotSpot(TM) Client VM (build 1.4.0-b92, mixed mode)
This is my login configuration:
#/usr/lib/jdk1.4/jre/lib/security > cat login.config
ServerLoginModule {
com.sun.security.auth.module.UnixLoginModule required debug=true;
I had to pass the weblogic system password on the commandline
(with -Dweblogic.management.password=$WLS_PW).
The password in password.ini somehow didn't work ... (I was
prompted for the guest password, was able to boot the server but
had some weblogic.management.NoAccessRuntimeException later on.
Yeshwant <[email protected]> wrote:
>
Try the pdf document that I have attached. Please note that using 1.4
JVM
is currently not supported by BEA
let me know if it works.
Aamir Baig wrote:
Will weblogic 5.1, 6.0 or 6.1 work with jdk 1.4 ? has anyone tried
and
succeeded ?
Thanks in advance
Kind Regards,
Aamir Baig
Etilize, Inc.
Phone : 310-767-4001 x 205
Fax: 310-767-1548Output:
% startWebLogic_JVM1.4.sh
LD_LIBRARY_PATH=.:/usr/sybase/OCS-12_0/lib:/local/upm/bea/wlserver6.1/lib/so
laris:/local/upm/bea/wlserver6.1/lib/solaris/oci816_8
* To start WebLogic Server, use the password *
* assigned to the system user. The system *
* username and password must also be used to *
* access the WebLogic Server console from a web *
* browser. *
java.lang.SecurityException: Unable to locate a login configuration
at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:97)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAcces
sorImpl.java:39)
at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstruc
torAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at
javax.security.auth.login.Configuration$3.run(Configuration.java:221)
at java.security.AccessController.doPrivileged(Native Method)
at
javax.security.auth.login.Configuration.getConfiguration(Configuration.java:
215)
at
javax.security.auth.login.LoginContext$1.run(LoginContext.java:170)
at java.security.AccessController.doPrivileged(Native Method)
at
javax.security.auth.login.LoginContext.init(LoginContext.java:167)
at
javax.security.auth.login.LoginContext.<init>(LoginContext.java:393)
at
weblogic.security.internal.ServerAuthenticate.main(ServerAuthenticate.java:8
1)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:195)
at weblogic.Server.main(Server.java:35)
Caused by: java.io.IOException: Unable to locate a login configuration
at com.sun.security.auth.login.ConfigFile.init(ConfigFile.java:206)
at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:95)
... 16 more

Hi Janne,
You may want to check this link:
http://e-docs.bea.com/wls/docs70/compatibility/compatibility.html
"janne" <[email protected]> wrote in message
news:[email protected]..
Are WebLogic 6.1 and 7.0 EJBs interoperable? Can a client EJB on 6.1
call another EJB on 7.0 and vice versa?
Weblogic 5.1 and 6.0 were not interoperable. Interoperability was
achieved with versions 5.1 sp12 and 6.1 sp 3.
http://e-docs.bea.com/wls/docs61/interop/interop.html
Regards,
Slava Imeshev

WEBLOGIC 6.1 AND STRUT 1.1

Does anybody knows if weblogic 6.1 server support strut 1.1? Thank you.

Hi Janne,
You may want to check this link:
http://e-docs.bea.com/wls/docs70/compatibility/compatibility.html
"janne" <[email protected]> wrote in message
news:[email protected]..
Are WebLogic 6.1 and 7.0 EJBs interoperable? Can a client EJB on 6.1
call another EJB on 7.0 and vice versa?
Weblogic 5.1 and 6.0 were not interoperable. Interoperability was
achieved with versions 5.1 sp12 and 6.1 sp 3.
http://e-docs.bea.com/wls/docs61/interop/interop.html
Regards,
Slava Imeshev

Communicating between Weblogic 8.1 and Weblogic 10.3

Hi,
I have a requirement where in I need to access Queues in Weblogic 10.3 from Weblogic 8.1 and viceversa.
Weblogic 8.1 :
This has a proxy/web application that needs to put request to a Queue exposed in weblogic 10.3
And will again poll for a Response Queue in weblogic 10.3
Is it feasible, knowing the fact that jdk version in 8.1 is 1.4 & Jdk version is 1.6 in 8.1 ?
Can we lookup for Queue defined in 8.1 in Weblogic 10.3 ? Can we use JMS adapter in 10.3 for acheiving this.
Any help is greatly appreciated.
Thanks !!

Avoid using Message Bridges to receive messages.
See the best practice: http://download.oracle.com/docs/cd/E15051_01/wls/docs103/jms/interop.html#wp1009272
Q. When should I avoid using a messaging bridge?
A. Other methods are preferred in the following situations:
    * Receiving from a remote destination—use a message driven EJB or implement a client consumer directly.
    * Sending messages to a local destination—send directly to the local destination.
    * Environment with low tolerance for message latency. Messaging Bridges increase latency and may lower throughput. Messaging bridges increase latency for messages as they introduce an extra destination in the message path and may lower throughput because they forward messages using a single thread.
    * Forward messages between WebLogic 9.0 domains—Use WebLogic Store-and-Forward.

WebLogic 8.1 and Tomcat connection problem

I am using Tomcat 4.0.6 for my JSPs and WebLogic for my EJBs.
Everything worked fine under WebLogic 6.1 but I am trying
to upgrade to WebLogic 8.1 and it is not working.
I can also connect to WebLogic 8.1 from a standalone class
but not using Tomcat. What is wrong?
This is the basic code I am using to connect:
Hashtable ht = new Hashtable(4);
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,"t3://localhost:7009");
InitialContext ic = new InitialContext(ht);
Object obj = ic.lookup("NsbInfoHome");
NsbInfoHome home = ( NsbInfoHome) PortableRemoteObject.
narrow(obj, NsbInfoHome.class);
NsbInfo nsbInfo = home.create();
NsbMemberPrimaryInfo info = nsbInfo.getMemberPrimaryInfo(1);
And this is the error
java.lang.NullPointerException
at weblogic.rmi.internal.StubGenerator.getStubOnClient(StubGenerator.java:694)
at weblogic.rmi.internal.StubGenerator.getStubClass(StubGenerator.java:666)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:712)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:699)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:76)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:486)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:449)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:345)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:308)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:234)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:135)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:672)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:250)
at javax.naming.InitialContext.init(InitialContext.java:226)
at javax.naming.InitialContext.<init>(InitialContext.java:202)
at org.apache.jsp.testWL2$jsp._jspService(testWL2$jsp.java:81)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:201)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:381)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
at java.lang.Thread.run(Thread.java:536)
--------------- nested within: ------------------
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Failed to
generate class for weblogic.jndi.internal.ServerNamingNode_WLStub ] -
with nested exception:
[java.lang.NullPointerException]
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:716)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:699)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:76)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:486)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:449)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:345)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:308)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:234)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:135)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:672)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:250)
at javax.naming.InitialContext.init(InitialContext.java:226)
at javax.naming.InitialContext.<init>(InitialContext.java:202)
at org.apache.jsp.testWL2$jsp._jspService(testWL2$jsp.java:81)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:201)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:381)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
at java.lang.Thread.run(Thread.java:536)
Any ideas how to fix this?
Thanks,
Dan

Hi,
I work under a sligthly different seeting like Dan used (Java Client instead of JSPs, but same context properties), but the problem is exactly the same: weblogic.rmi.internal.StubGenerator.getStubOnClient() results in a NullPointerException.
What does this method actually do? I provided the weblogic.jar in the client's runtime environment; is it possible that the method asks for something else on the client side that I have to provide (only guessing...)
PS: I found the error myself. Its the Eclipse 3.0 IDE that won't work together with the factory class of BEA for some obscure reason. Switching to another IDE solved the problem...
Message was edited by c_web at Dec 1, 2004 6:03 AM

WebLogic 11g R2 and OSGI

Hi there,
We are running Oracle WebCenter Sites 11g on top of WebLogic 11g R2 and we would like to have different versions of the same library running together, one for OWCS itself and other to some Java code we are developing (which will be part of the new website).
Is that possible?
The real question is: How can we have a current version of a library (for isntance, Spring MVC) running side by side with a (much) older version of that library which is required by OWCS? Some people said we could wrap the application (running on top of a current version of Spring) into an EJB, but that sounds like a lot of overhead.
Cheers

Hi,
I do not think domain will be an issue. Did you install Oracle 11gR2 at home 32 bit or 64 bit version. Your server also may not be same. So there are so many factor which are different, causing it not to work at work, but work in a small setup at home.
Regards

How do I develop J2EE application in integrated envirenment of WebLogic 8.1 and JBuilder9?

Now I have 3 questions:
1. I can not use the EJB's local interface, although I have define local interface
in config file and query code in the programe perfectly. What additional work
has I not done;
2. I have to compile my program into a .jar, .ear or .war file(s) to debug, that
is a unhandy way, even I change only one line of one page, I have to redeploy
the whole application package once more. Is there any way else to deal with the
work? Not a .jar, .war or .ear file(s) in the design time, just one page or class
file, and I need not deploy and compile the whole application;
3. If I use the JBuilder9's Run command boot the WebLogic Server, the application
deploied anteriorly becomes unavailable. But when the WebLogic Server is boot
from console, everything is O.K.. Any advice?
Thanks in advance for any help you offer!

Hey Daniel.
1. What specific problems are you having? What is your EJB architecture?
You can find an EJB example that uses Local Interfaces here:
http://dev2dev.bea.com/codelibrary/code/examples_ejb20.jsp
Also, our end-to-end sample application called MedRec, found in WebLogic
Server 8.1, uses Local EJBs.
2. Not sure which WebLogic server you are running, but 8.1 has the ability
to deploy ears and wars as exploded applications where non-compiled files
remain within your source location. This feature eliminates the need to
jar, war, or ear while also eliminating copying of source code. This
feature is called Split Development Directory Structure. Split Development
Directory Structure is accompanied by new Ant tasks to aid in application
development.
You can find more on Split Development Directory Structure here:
http://edocs.bea.com/wls/docs81/programming/environment.html#1092719.
Ant tasks:
http://edocs.bea.com/wls/docs81/programming/environment.html#1093779
An example is here:
http://dev2dev.bea.com/codelibrary/code/examples_splitdir.jsp
MedRec also uses the Split Development Directory Structure and Ant tasks.
3. Dunno. ;-)
-Chris
<[email protected]> wrote in message news:[email protected]...
>
Now I have 3 questions:
1. I can not use the EJB's local interface, although I have define localinterface
in config file and query code in the programe perfectly. What additionalwork
has I not done;
2. I have to compile my program into a .jar, .ear or .war file(s) todebug, that
is a unhandy way, even I change only one line of one page, I have toredeploy
the whole application package once more. Is there any way else to dealwith the
work? Not a .jar, .war or .ear file(s) in the design time, just one pageor class
file, and I need not deploy and compile the whole application;
3. If I use the JBuilder9's Run command boot the WebLogic Server, theapplication
deploied anteriorly becomes unavailable. But when the WebLogic Server is boot
from console, everything is O.K.. Any advice?
Thanks in advance for any help you offer!

Weblogic 9.1 and Weblogic 6.1 "Incompatible versions " error

Hi,
When i tried to create InitalContext object on Weblogic 9.1 It gives me following error.
"javax.naming.CommunicationException [Root exception is weblogic.socket.UnrecoverableConnectException: [Login f
ailed: 'Incompatible version: Incompatible versions - this server:6.1.7.0 client:9.1.0]]"
The EJB is deployed on Weblogic 6.1 and client deployed on Weblogic 9.1 trying to access that EJB.
Please let me know how to resolve this issue.
Regards
Jagat Kansara

Hi,
When i tried to create InitalContext object on Weblogic 9.1 It gives me following error.
"javax.naming.CommunicationException [Root exception is weblogic.socket.UnrecoverableConnectException: [Login f
ailed: 'Incompatible version: Incompatible versions - this server:6.1.7.0 client:9.1.0]]"
The EJB is deployed on Weblogic 6.1 and client deployed on Weblogic 9.1 trying to access that EJB.
Please let me know how to resolve this issue.
Regards
Jagat Kansara

Help!.... XA error: using Weblogic 6.1 and Oracle 8.1.6

 Hi,
 I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSource as I wanted
 to use Container Managed Transaction through a Session Bean.
 Connection Pool Settings: -------------------------
 Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
 TXDataSource Settings : -----------------------
 Name - myXADS
 JNDIName - myXADS
 PoolName - myXAPool
 Everything works fine but once in a while I get the following exception:
 java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured
 in the transaction branch start() failed on resource 'myXAPool' Unexpected error
 during start for XAResource 'myXAPool': null
 The connection pool size is 30 and the number connections high reached was 5,
 which means there are enough connections in the pool available at all time.
 It would be really great if you can help me out.
 Thanks in Advance, Sudhir.


Hi Slava,
Sorry about that Oracle instance I am using is 8.1.7.
For the XA Driver I am using the one that comes with Weblogic in weblogic.jar.
And my Weblogic version 6.1 Sp3.
Thanks,
Sudhir.
"Slava Imeshev" <[email protected]> wrote:
Hi Sudhir,
Are you using an instance of 8.1.6 or 8.1.7? In the message header you
say
8.1.6.
Regards,
Slava Imeshev
"Sudhir Babu" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSourceas
I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager errorhas
occured
in the transaction branch start() failed on resource 'myXAPool' Unexpectederror
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reachedwas
5,
which means there are enough connections in the pool available at alltime.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.

XA error: using Weblogic 6.1 and Oracle 8.1.6

Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSource as I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured
in the transaction branch start() failed on resource 'myXAPool' Unexpected error
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reached was 5,
which means there are enough connections in the pool available at all time.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.

Hi Slava,
Sorry about that Oracle instance I am using is 8.1.7.
For the XA Driver I am using the one that comes with Weblogic in weblogic.jar.
And my Weblogic version 6.1 Sp3.
Thanks,
Sudhir.
"Slava Imeshev" <[email protected]> wrote:
Hi Sudhir,
Are you using an instance of 8.1.6 or 8.1.7? In the message header you
say
8.1.6.
Regards,
Slava Imeshev
"Sudhir Babu" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSourceas
I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager errorhas
occured
in the transaction branch start() failed on resource 'myXAPool' Unexpectederror
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reachedwas
5,
which means there are enough connections in the pool available at alltime.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.

Which database driver is required for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server

Hi,
i am trying to configure JDBC with weblogic. Can any one tell me which deriver needs to be selected for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server.
if i use BEA oracle Driver (Type 4) version 9.0.1, 9.2.0,10,11, i find error (see snap:2)
Connection test failed.
[BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: hdyhtc137540d weblogic.jdbc.base.BaseExceptions.createException(Unknown Source) weblogic.jdbc.base.BaseExceptions.getException(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.open(Unknown Source) weblogic.jdbc.base.BaseConnection.connect(Unknown Source) weblogic.jdbc.base.BaseConnection.setupImplConnection(Unknown Source) weblogic.jdbc.base.BaseConnection.open(Unknown Source) weblogic.jdbc.base.BaseDriver.connect(Unknown Source) com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:505) c om.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConn ectionConfiguration(CreateJDBCDataSource.java:369) sun.reflect.GeneratedMethodAccessor 826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...
and
when i use oracle's driver (thin) version 9.0.1, 9.2.0,10,11, i find error
Connection test failed.
Io exception: The Network Adapter could not establish the connection oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:10 1) oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112) oracle .jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173) oracle.jdbc.drive r.DatabaseError.throwSqlException(DatabaseError.java:229) oracle.jdbc.driver.DatabaseE rror.throwSqlException(DatabaseError.java:458) oracle.jdbc.driver.T4CConnection.logon( T4CConnection.java:411) oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnectio n.java:490) oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202) oracle .jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33) oracle.jdbc. driver.OracleDriver.connect(OracleDriver.java:474) com.bea.console.utils.jdbc.JDBCUtil s.testConnection(JDBCUtils.java:505) com.bea.console.actions.jdbc.datasources.createjd bcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:36 9) sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...

i am finding this error when i click on Test Configuration button to test the connection wth oracle DB

CF8 on Weblogic 10.0 and Apache

I am trying to configure CF8 as an EAR file on Weblogic 10.0
and configuring it with Apache webserver. The settings for Weblogic
are made as mentioned in the configuration document and CF8 is
working fine on Weblogic.
Now for Apache connectivity, a connector is configured for
Weblogic which handles *.cfm files requests as well.
- The CFM files are kept in webserver and when I try to open
a cfm file, the proxy is getting invoked but since Weblogic doesn't
find the file URI it returns 404.
- Please let me know how can the CFM files kept on Webserver
be rendered using CF8 deployed on Weblogic
Or there is a need for these files to be kept on the Weblogic
Appserver only

sam_cf09 wrote:
> Can the CFM files be a part of any WAR file deployed on
Weblgic and Cold
> fusion will take care of rendering them
Sure. If you want to put a file example.cfm in a WAR file,
put it in the
root of the WAR. Your folder structure will look something
like:
WAR/
WAR/example.cfm
WAR/WEB-INF
WAR/WEB-INF/web.xml
WAR/WEB-INF/*
WAR/WEB-INF/cfusion
WAR/WEB-INF/cfusion/lib/
etc.
Then if you have a context root "/test" in your
Application.xml you can
reach your template through the URL
http://server/test/example.cfm
The best way to get a WAR (or EAR) file for deployment is to
run the
installer. It has the option to generate a WAR or EAR for
you. Use that,
then later unjar it to see how it looks internally.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

WebLogic 8.1SP4 and IIS

Hi,
I want to configure weblogic with IIS and have found enough articles on how to proxy IIS to point to a single instance or a clustered environment but not on how to proxy IIS to multiple WebLogic servers
I have the application running on
http://<weblogic-server>:7201/elms
http://<weblogic-server>:7301/elms
http://<weblogic-server>:7401/elms
and I want to be able to access these via the IIS through these URLs:
http://<IIS_Server>/elms
http://<IIS_Server>/elms_sit
http://<IIS_Server>/elms_uat
Is this configuration possible? Any help would be highly appreciated.
Thanks
Sandeep

Since you are attempting to proxy by path you need to configure the iisforward.dll as stated in step #3 here:
http://e-docs.bea.com/wls/docs81/plugins/isapi.html#100382

Weblogic Bridge "failed and will reconnect later"

The enterprise architecture is as follows:
1 Physical machine where I have 2 VMs on this machine, and each VM I have 1 domain, 1 Cluster and 1 managed server, and the second VM I have the replicated what I have in first VM.
In first domain I have the OSB, in the second domain I have SOA.
What I need ? Send information of queues (topics) of First Domain (OSB) to second domain(SOA).
At first the only thing I did was:
In the first domain I created OSB JMS Server, JMS Module, Connection Factory and Queue Topic.
In the second domain SOA I replied the same thing but with different names.
Then I created the bridge with configuration default between the first domain and the second domain, the bridge and when active it generates me a message Weblogic Bridge "failed and will reconnect later"
I did a test on my local machine windows where I created two domains, and the same procedures you did above, but the point was funcinou been activated now for the enterprise environment I'm not managing to make it work, you could tell me what is wrong . in both cases restarted the weblogic server as the machine itself the question that ran on my machine and machine company no.
If you can give me a light thank.

This is a bug (6973877, derby only) which has been fixed in 4.5 build14 and 4.4u2p1. Thanks for reporting. The problem is the missing "FOR BIT DATA" in LOG_RECORD column in derby table definition MQTMLRJMSBG41 in broker default.properties file
- LOG_RECORD VARCHAR(2048) NOT NULL,\
+ LOG_RECORD VARCHAR(2048) FOR BIT DATA NOT NULL,\

Preview Release of WebLogic Portal 9 and Workshop 9

I would like to get my hands on a developer preview release of WebLogic Portal 9 and Workshop 9. I can't seem to find it online so I'm hoping someone can point me in the right direction. We're currently evaluating portal products and I would hate to decide against BEA based on the lack of availability of the forthcoming version.
Anybody know where a developer release of either of these two products can be found?

The Technology Preview for WLP 9.x and WLW 9.x will be available in early December. Please contact your BEA account team to let them know that you are interested.
At present the plan is to have a GroupSpace community site for use by all customers participating in the Technology Preview. A BEA technical field staff member (SE, PS, etc.) assigned to your account will use this site to send you an invitation, and when you join you will have access to the installation. Questions, discussions, etc. for the Technology Preview will all go through the GroupSpace site. If you don't know who your BEA technical account member(s) are, you should find out as they will be the key to obtaining the Technology Preview.
If you can't wait for the Technology Preview, please ask your BEA acount team to contact myself or others in Product Management. We'll be happy to go over the product features, show you demos from current builds, etc.
Thanks,
Skip Sauls
Senior Product Manager, WebLogic Portal

Weblogic 6.1 and 7.0 EJB interoperability

Similar Messages

Maybe you are looking for