Weblogic 8.1 with Xalan 2.6.1 and Xerces 2.6.2 ?!?

Hi,
I'm trying to use Xalan 2.6.1 and Xerces 2.6.2 with Weblogic 8.1SP2, but no result yet...
I found docs on bea website:
http://edocs.bea.com/wls/docs81/pdf/faq.pdf
http://e-docs.bea.com/wls/docs81/xml/xml_admin.html
where I found this:
"Warning: In version 8.1 of WebLogic Server, you can plug in only the following versions of the Apache Xerces parser:
Xerces 2.2.0
Xerces 2.3.0
Xerces 2.4.0
In addition, you can plug in only those versions of the Apache Xalan transformer that are compatible with the preceding versions of the Apache Xerces parser."
I can't find any solution to this?
I tried various option:
- xercesImpl2.6 in the classpath variable
- xalan2.6.2 in the endorsed lib
- registered factory impl names in xml registry
- prefer web-inf set to true
Errors result in following exception:
- NoMethodFound (rhino classes inside weblogic.jar)
- ClassCast (xalan/xerces conflicts)
Any one has suggestions?
Regards
Leonardo

According to that link your right it is not supported.
Have you tried adding the xerces jars at the beginning of the classpath?

Similar Messages

Weblogic and xerces and xalan

I understand that xerces and xalan are a part of the weblogic's distribution.
Will BEA also upgrade to newer versions of these softwares as they are available?
If not how do I use newer versions of these softwares with weblogic.
This is becoming a critical issue for us as I already see a remarkable difference
in performance while doing transformations. The newer versions of xalan and xerces
are performing much better with the same xml and xsl documents as compared to
the previous versions.

According to that link your right it is not supported.
Have you tried adding the xerces jars at the beginning of the classpath?

Install weblogic server 6 with sp1 failure in W2K

When I install weblogic server 6 with sp1 in W2K,
InstallAnyWhere display, when InstallAnyWhere process 100%,
there is nothing in my display about the Install.
there is weblogic600sp1_ and javaw in Windows Task manager->process.
I have install JDK1.3

If I remember correctly, you should make sure that the JDK is not in your
path.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"yshyang" <[email protected]> wrote in message
news:[email protected]..
When I install weblogic server 6 with sp1 in W2K,
InstallAnyWhere display, when InstallAnyWhere process 100%,
there is nothing in my display about the Install.
there is weblogic600sp1_ and javaw in Windows Task manager->process.
I have install JDK1.3

Using WebLogic JMS Wrappers with Spring

Hi,
I was just wondering if anyone used WebLogic JMS wrappers with Spring?
I am using WebLogic configured to have Sonic as my Foreign JNDI Provider. Weblogic provide me with specific entries on the admin console to set information such as the JNDI name of the Sonic Connection Factory. If I specify this JNDI name in the Spring config, and call getConnection() then I will get back a new connection each time.
I don't want this, I want to cache the connection (as connections are expensive in Sonic). This is where the WebLogic JMS wrappers come in, they can handle the pooling for me but the only way I can see to use them is via a resource-ref. It is possible for Spring to get a handle onto these wrappers or should I use Spring's own pooling mechanism instead?
P.S. I've also asked this question on the Spring forum
Thanks for any help
Mandy

Maybe you have already tried the following:
<beans xmlns:jee="http://www.springframework.org/schema/jee" ... >
<jee:jndi-lookup id="connectionFactory" jndi-name="jms.ConnectionFactory">
<jee:environment>
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://localhost:7001
</jee:environment>
</jee:jndi-lookup>
</beans>
an alternative is to use the JNDI template
<beans ... >
<bean id="jndiTemplate" class="org.springframework.jndi.JndiTemplate">
<property name="environment">
<props>
<prop key="java.naming.factory.initial">weblogic.jndi.WLInitialContextFactory</prop>
<prop key="java.naming.provider.url">t3://localhost:7001</prop>
</props>
</property>
</bean>
<bean id="connectionFactory" class="org.springframework.jndi.JndiObjectFactoryBean">
<property name="jndiTemplate" ref="jndiTemplate" />
<property name="jndiName"><value>jms.ConnectionFactory</value></property>
</bean>
</beans>

How to use CMP in Weblogic 9.2 with MySQL?

Hello all...
So I've been tasked wiith moving an Oracle/Weblogic installation to a MySQL/Weblogic platform. Things are moving along well, except that in my CMP (Container-Managed Persistence) descriptors, the database-type is set to "Oracle" and there are references to columns of type "OracleBlob" and "OracleClob".
I changed database-type to "MySQL" and those columns to "Blob" and "Clob", but it doesn't work -- Weblogic reports that MySQL doesn't support Blobs and Clobs (which is untrue, but perhaps Weblogic 9.2 doesn't know how to deal with MySQL Blobs and Clobs).
Has anyone encountered this before? Is there a workaround? I've Google'd it and looked here, and it doesn't seem like many people use this combination of MySQL and Weblogic, so there's not much discussed on this topic.
Any help would be much appreciated!
- Tim Bessie

First you need to make sure that you are using supported configuration. CMP (WebLogic feature) is supported with MySql4 with Connect/J
http://edocs.bea.com/platform/suppconfigs/configs92/92_over/supported_db.html#1177621
Thanks,
Jayesh
Yagna Sys

How can I enable remote debug in weblogic to use with Rational RSA IDE?

How can I enable the remote debugging technique so that I can work with my IDE.
I use RSA by IBM as the IDE
What should be the changes in the setdomainenv or startweblogic?
I use 10.3
Please help.. ur help is appreciable...

Hi,
I did not make any console adjustments for debugging on my WebLogic 10.3.2.0 - however I am running in development mode on an "adminServer" (an option during the install)
In the console there is a debug setup page - that seems to have no effect for me (I can always debug) - so either it is a combination of development mode and/or the startWeblogic script from the Eclipse plugin.
However, these debug settings are likely for debugging into the server - you only want to debug your own app code right?
On the console page goto
http://localhost:7001/console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage
servers | AdminServer | configuration-debug | expand weblogic
I see...
"Use this page to define debug settings for this server.
Debug settings for this Server
EnableDisableClear Showing 1 to 2 of 2 Previous Next
Debug Scopes and Attributes State
default Disabled
weblogic Disabled
EnableDisableClear Showing 1 to 2 of 2 Previous Next
Try expanding the whole tree and selecting the root to enable everything.
You will see the following
10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute DebugAbbreviation on weblogic.management.configuration.ServerDebugMBeanImpl@47a32e1b([base_domain]/Servers[AdminServer]/ServerDebug[AdminServer]) has been changed. This may require redeploying or rebooting configured entities>
<10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server AdminServer. This server must be rebooted in order to consume this change.>
<10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage.>
When I debug WebLogic 10.3.2.0 from Eclipse 3.5 EE - I see the following in my server startup log which includes the "-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453" you mentioned.
Starting WLS with line:
c:\opt\wls10320\JROCKI~1.5-3\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\opt\wls10320\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\opt\wls10320\WLSERV~1.3 -Dwls.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=c:\opt\wls10320\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
The server process listening on debug portl 8453 ooks like this
Oracle WebLogic Server 11gR1 PatchSet 1 at localhost [Oracle WebLogic Launch Configuration]
     BEA JRockit(R)[localhost:8453]
          Thread [Main Thread] (Running)
          Daemon Thread [Timer-0] (Running)
          Daemon Thread [Timer-1] (Running)
          Daemon Thread [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)
          Daemon Thread [weblogic.time.TimeEventGenerator] (Running)
          Daemon Thread [JMAPI event thread] (Running)
          Daemon Thread [weblogic.timers.TimerThread] (Running)
          Daemon Thread [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)
          Daemon Thread [Thread-7] (Running)
          Daemon Thread [ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'] (Running)
          Daemon Thread [ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'] (Running)
I hit a breakpoint and see
Daemon Thread [[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] (Suspended (breakpoint at line 56 in ApplicationService))
     ApplicationService_5ptwty_Impl(ApplicationService).insertObjects(List<Cell>) line: 56
     NativeMethodAccessorImpl.invoke0(Method, Object, Object[]) line: not available [native method]
     NativeMethodAccessorImpl.invoke(Object, Object[]) line: 39
     DelegatingMethodAccessorImpl.invoke(Object, Object[]) line: 25
     Method.invoke(Object, Object...) line: 597
     AopUtils.invokeJoinpointUsingReflection(Object, Method, Object[]) line: 310
     ReflectiveMethodInvocation.invokeJoinpoint() line: 182
     ReflectiveMethodInvocation.proceed() line: 149
     DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131
     DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119
     ReflectiveMethodInvocation.proceed() line: 171
     MethodInvocationVisitorImpl.visit() line: 37
     EnvironmentInterceptorCallbackImpl.callback(MethodInvocationVisitor) line: 55
     EnvironmentInterceptor.invoke(MethodInvocation) line: 50
     ReflectiveMethodInvocation.proceed() line: 171
     ExposeInvocationInterceptor.invoke(MethodInvocation) line: 89
     ReflectiveMethodInvocation.proceed() line: 171
     DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131
     DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119
     ReflectiveMethodInvocation.proceed() line: 171
     JdkDynamicAopProxy.invoke(Object, Method, Object[]) line: 204
     $Proxy68.insertObjects(List) line: not available
     ApplicationService_5ptwty_ApplicationServiceLocalImpl.insertObjects(List<Cell>) line: 306
     FrontController.generateGlider(PrintWriter) line: 240
thank you
/michael
http://www.eclipselink.org

Weblogic.management.security with transactions, Please HELP

I am using weblogic.management.security.authentication API to programmatically insert/delete users and passwords into/from default security provider on Weblogic Server 8.1. I want to add transactional support to this these actions, I tried using UserTransaction API but without any luck. Does weblogi.managment.security.authenication has no transactional support (rollback-commit) or am I doing something wrong? I very much appreciate your help and looking forward to hearing from you!!!!
It doesn't rollback, Here is the code:
UserTransaction transaction = (UserTransaction)ctx.lookup("javax.transaction.UserTransaction");
transaction.begin();
UserEditorMBean userEditor = (UserEditorMBean)providers;
userEditor.createUser(userName, password, description);
transaction.rollback();

I do not think you can have transactions over MBean calls as they communicate with relevant object over t3 and this objects are possibly in different class loader.
-TJ

What are the limitations in weblogic that comes with JDeveloper?

Hi,
What are the limitations in weblogic that comes with JDeveloper?
Thanks for your help.

Not much. If there is, you can always create your own domain with the servers you want and create a connnection to the admin server of that domain in JDeveloper.

SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70

SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70
Have you tried to port and run (Sneak Preview) SAPNetWeaver java 04 SP16 or 04S SP7 with a later version on Xalan version 2.60 or Xalan version 2.70 along with jdk 1.4.2_(8 or greater)?
What specifically is failing? What patches or work around have you used to overcome compatibility issues with Xalan?
When we run Sneak Preview SAPNetWeaver java 04 SP16 SP7 with a version on Xalan version 2.60 or Xalan version 2.70 along with jdk 1.4.2_11, We get error 503 Service Unavailable, Application cannot be started
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Error while parsing file data-source-aliases.xml.

Hi
SAP does not allow usage of any other XML parsers with SAP web AS.
please have a look at this link
http://help.sap.com/saphelp_nw04/helpdata/en/36/ef353e39011a38e10000000a114084/frameset.htm
"Setting system properties in a system that supports more than one parser is prohibited".
The Error which you are getting is because one of the
java.system properties for parsing is
getting changed by xalan. These system properties are explictly set by the SAP XML implementation which it does not allow you to change.
Also can you please let me know where are you placing the xalan jar file ? is it deployed as a j2ee library or part of war ?
Hope this helps. please mark points for helpful answers
regards
rajesh kr

Weblogic portal Integration with UCM by weblogic virtual repository

Anyone has experience with Weblogic portal Integration with UCM by weblogic virtual repository? Thanks.

Since only folders_g can be used for integrating with Webcenter Spaces/Portal we are not sure of what our strategy should be. Is there plan to use framework folders with Webenter in the future?Certainly there are. Unfortunately, no exact date/release has been communicated so far. If you need a quick implementation (following few next months) I'm afraid you will have to go with folder_g

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

WebLogic 9.2 with Apache Connector Config

Hi I am new to this forum, WebLogic, and all Oracle products for that matter. I am a college intern and I have been asked to learn how to use WebLogic 9.2. I was told that they want it to be connected to apache with the mod_wl_22.so shared module for Apache. I have placed the module in the directory and added the LoadModule line to the httpd.conf file and the module loads fine. From reading through the WebLogic documentation I now know that I need to create a <Location> block in httpd.conf for the connector. I also know that the arguments that you need to use are WebLogicHost and WebLogicPort. So in my httpd.conf I have added the following.
<Location /weblogic>
WebLogicHost 10.15.107.90/weblogic
WebLogicPort 7001
</Location>
I also tried.....
<Location /weblogic>
WebLogicHost /weblogic
WebLogicPort 7001
</Location>
and.....
<Location /weblogic>
WebLogicHost 10.15.107.90
WebLogicPort 7001
</Location>
All with no luck. When I browse to http://10.15.107.90/weblogic I get nothing. Can anybody help me out here?
Thanks
Scott

Hi,
This is a template for 'httpd.conf'. Please make it sure that you are following this:
===
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName beatest.kpit.com:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7004
WLLogFile C:/proxylog/wl-proxy.log
WLTempDir C:/temp/wl-proxy.log
MatchExpression /*
</IfModule>
<Location />
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005
Debug ALL
WLLogFile C:/proxylog/wl-proxy.log
WLTempDir C:/temp/wl-proxy.log
DebugConfigInfo On
PathTrim /
DynamicServerList OFF
</Location>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

Weblogic 9.1 with toplink JPA - Problem creating entityManagerFactory

I am using weblogic 9.1 with toplink jpa provider.
I am getting the error while creating entityManagerFactory.
Exception stack trace
faces.FacesException: #{LogonMB.authenticateLogin}: javax.faces.el.EvaluationException: java.lang.ExceptionInInitializerError
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:98)
     at javax.faces.component.UICommand.broadcast(UICommand.java:332)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:268)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Caused by: javax.faces.el.EvaluationException: java.lang.ExceptionInInitializerError
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:150)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
     ... 19 more
Caused by: java.lang.ExceptionInInitializerError
     at com.arisglobal.cc.service.impl.PreferencesServiceImpl.getEntityManager(PreferencesServiceImpl.java:45)
     at com.arisglobal.framework.service.AbstractBusinessService.(AbstractBusinessService.java:24)
     at com.arisglobal.cc.service.impl.PreferencesServiceImpl.(PreferencesServiceImpl.java:36)
     at com.arisglobal.cc.factory.BusinessServiceFactory.createPreferencesService(BusinessServiceFactory.java:113)
     at com.arisglobal.cc.mb.LogonManagedBean.authenticateLogin(LogonManagedBean.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
     ... 20 more
Caused by: Exception [TOPLINK-34002] (Oracle TopLink Essentials - 2006.7 (Build 060720)): oracle.toplink.essentials.exceptions.XMLParseException
Exception Description: An exception occurred while processing persistence.xml from URL: file:/D:/ClinicalConnect/4. CODING/web/WEB-INF/classes/META-INF/persistence.xml. A SAXParser instance could not be created.
Internal Exception: org.xml.sax.SAXNotRecognizedException: http://java.sun.com/xml/jaxp/properties/schemaLanguage
     at oracle.toplink.essentials.exceptions.XMLParseException.getXMLParseException(XMLParseException.java:101)
     at oracle.toplink.essentials.exceptions.XMLParseException.exceptionCreatingSAXParser(XMLParseException.java:73)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.processPersistenceXML(PersistenceUnitProcessor.java:315)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.processPersistenceArchveFromUnconvertableURL(PersistenceUnitProcessor.java:90)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.processPersistenceArchive(PersistenceUnitProcessor.java:202)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.getPersistenceUnits(PersistenceUnitProcessor.java:77)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initPersistenceUnits(JavaSECMPInitializer.java:222)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initialize(JavaSECMPInitializer.java:240)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initializeFromMain(JavaSECMPInitializer.java:277)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.getJavaSECMPInitializer(JavaSECMPInitializer.java:80)
     at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:118)
     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:83)
     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:60)
     at com.arisglobal.cc.helper.ResourceManager.(ResourceManager.java:8)

hi JavaCrazyLover
u got why u getting the error i ma getting similar error its running fine in 8.1 but in web9.1 it is giving errors in some jsp pages may be due to versions or name spacing ie we write in top of the page DTD schema am not sure but i think , there is no jars to add on as such web 9.1 is upgraded one and it supports all files some where there will be conflicts between versions example JDK 1.5and 1.4 enum is a keyword in 9.1 but in normal in 8.1 if u get the solution for this error please mail me to [email protected]
rgds
Mohammed Mansoor

Debug Weblogic 10.0 with 2-Way SSL: Error 401--Unauthorized

Hi,
I am working on Weblogic 10.0 with 2-Way SSL configuration. User uses X.509 certificate to login into the system. I have a default UserNameMapper which maps the CN to the a user name in the LDAP user store. User can login without problem. But after user login, when he tries to hit a new page before the original page fully loaded, he will get a "Error 401--Unauthorized".
I turned on the Weblogic security debug and got the following warning with stack trace. Can anybody help me to figure out what's wrong? How do I troubleshoot this issue? Any help is really appreciated.
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecurityAtz> <BEA-000000> <com.bea.common.security.internal.service.AccessDecisionServiceImpl.isAccessAllowed AccessDecision returned PERMIT>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecurityAtz> <BEA-000000> <com.bea.common.security.internal.service.AuthorizationServiceImpl.isAccessAllowed returning adjudicated: true>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <write APPLICATION_DATA, offset = 0, length = 167>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <write APPLICATION_DATA, offset = 6, length = 1518>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: WARNING, Type: 0
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.closeWriteHandler(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.close(Unknown Source)
     at javax.net.ssl.impl.SSLSocketImpl.close(Unknown Source)
     at weblogic.socket.SocketMuxer.closeSocket(SocketMuxer.java:449)
     at weblogic.socket.SocketMuxer.cleanupSocket(SocketMuxer.java:795)
     at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:759)
     at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:700)
     at weblogic.servlet.internal.VirtualConnection.close(VirtualConnection.java:327)
     at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1431)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1375)
     at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <close(): 14324285>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 7034906>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 19096081>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <18691735 SSL3/TLS MAC>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <18691735 received HANDSHAKE>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ClientHello>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm MD5>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.5 for algorithm RC4>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.5 for algorithm HmacMD5>
Thanks,
Wayne

I decided to use pki with jaas/custom authentication provider to solve this problem. It works. If you want more details, please let me know.

Upgrade Weblogic 8.1 with JMS 1.1

Hello,
          I am trying to use a Foreign JMS server that I would like to run within the same JVM are my Weblogic server. The foreign JMS is ActiveMQ and supports JCA. This is especially important for XA connections to be managed by the container.
          However, Weblogic 8.1 uses JMS 1.02b and ActiveMQ uses JMS 1.1. I attempted to replace some of the classes within the weblogic jar with JMS 1.1 classes but I just ran into more issues. Anyone know how to properly upgrade Weblogic 8.1 to use JMS 1.1?
          Thanks,
          Denis.

You can put a jar of implementation of JMS1.1 in your classpath before the weblogic.jar . This will bypass the implementation of JMS weblogic provides.

Weblogic 8.1 with Xalan 2.6.1 and Xerces 2.6.2 ?!?

Similar Messages

Maybe you are looking for