Weblogic Assertion Error
Hello,
I have run into the following problem. When running a very long lasting
bean transaction on one BEA Weblogic 6.1 SP2 application server I get no errors,
but on the other one that in fact should be quite similar to the first one, I
get:
EJB Exception: ; nested exception is:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ attempt to pop from
an empty stack ] ...
The exception is raised from my EJB-s ejbPassivate() method, that only does the
following:
public void ejbPassivate() {
logger = null;
monitorLogger = null;
try {
ctx.close();
} catch (Exception e) {
e.printStackTrace();
"ctx" represents a UserTransaction.
What I am doing is calculating some dividends, and this takes time. There I
have several thousand holders, and in a for loop, I calculate dividends for each
one of them. The application doing this represents a stateful session bean (EJB).
I have done research, consulted with developers by my side, but still get this
strange error.
What causes this? What should I check? Is it in Weblogic application server's
configuration
or in the java bean?
Thanks in advance!
A.
[weblogic_assertion_error.gif]
I am not sure, but upgrade to SP5 and see if it helps.
Aulo Aasmaa wrote:
Hello,
I have run into the following problem. When running a very long lasting
bean transaction on one BEA Weblogic 6.1 SP2 application server I get no errors,
but on the other one that in fact should be quite similar to the first one, I
get:
EJB Exception: ; nested exception is:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ attempt to pop from
an empty stack ] ...
The exception is raised from my EJB-s ejbPassivate() method, that only does the
following:
public void ejbPassivate() {
logger = null;
monitorLogger = null;
try {
ctx.close();
} catch (Exception e) {
e.printStackTrace();
"ctx" represents a UserTransaction.
What I am doing is calculating some dividends, and this takes time. There I
have several thousand holders, and in a for loop, I calculate dividends for each
one of them. The application doing this represents a stateful session bean (EJB).
I have done research, consulted with developers by my side, but still get this
strange error.
What causes this? What should I check? Is it in Weblogic application server's
configuration
or in the java bean?
Thanks in advance!
A.
Rajesh Mirchandani
Developer Relations Engineer
BEA Support
Similar Messages
-
Assertion error using weblogic.ejbc20
I'm getting the following error message generating the jar file for my BimPspsAdjApp
WL bean:
[java] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Couldn't
find a WLBean called "BimPspAdjApp" ]
[java] at weblogic.utils.Debug.assert(Debug.java:84)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.initialize60(CompositeMBeanDescriptor.java:218)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.init(CompositeMBeanDescriptor.java:159)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.<init>(CompositeMBeanDescriptor.java:152)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:393)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:126)
[java] at weblogic.ejb20.ejbc.EJBCompiler.setupEJB(EJBCompiler.java:128)
[java] at weblogic.ejbc20.runBody(ejbc20.java:358)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:79)
[java] at weblogic.ejbc20.main(ejbc20.java:460)
[java] Exception in thread "main" weblogic.utils.AssertionError: ***** ASSERTION
FAILED *****[ Couldn't find a WLBean called "BimPspAdjApp" ]
[java] at weblogic.utils.Debug.assert(Debug.java:84)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.initialize60(CompositeMBeanDescriptor.java:218)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.init(CompositeMBeanDescriptor.java:159)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.<init>(CompositeMBeanDescriptor.java:152)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:393)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:126)
[java] at weblogic.ejb20.ejbc.EJBCompiler.setupEJB(EJBCompiler.java:128)
[java] at weblogic.ejbc20.runBody(ejbc20.java:358)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:79)
[java] at weblogic.ejbc20.main(ejbc20.java:460)
[java] Java Result: 1
My Ant command is:
<target name = "intBimPsp">
<mkdir dir="${ejbjartmp.dir}/webserviceBim/META-INF"/>
<mkdir dir="${ejbjartmp.dir}/webserviceBim/fastway/runtime/intBimPsp"/>
<copy file="${descriptors.dir}/BimPspAdjApp-ejb-jar.xml" tofile="${ejbjartmp.dir}/webserviceBim/META-INF/ejb-jar.xml"/>
<copy file="${descriptors.dir}/BimPspAdjApp-weblogic-ejb-jar.xml" tofile="${ejbjartmp.dir}/webserviceBim/META-INF/weblogic-ejb-jar.xml"/>
<copy todir="${ejbjartmp.dir}/webserviceBim/fastway/runtime/intBimPsp/">
<fileset dir="${build.dir}/fastway/runtime/intBimPsp/"/>
</copy>
<jar jarfile="${ejbjartmp.dir}/pre_BimPspAdjApp.jar"
basedir="${ejbjartmp.dir}/webserviceBim"/>
<java classname="weblogic.ejbc20" fork="yes" dir="${ejbjartmp.dir}">
<arg line="$pre_BimPspAdjApp.jar $BimPspAdjApp.jar"/>
<classpath>
<pathelement location="/apps/bea/wlserver6.1/lib/weblogic.jar"/>
<pathelement location="${ejbjartmp.dir}/pre_BimPspAdjApp.jar"/>
</classpath>
</java>
<delete dir="${ejbjartmp.dir}/webserviceBim/"/>
<delete file="${ejbjartmp.dir}/pre_BimPspAdjApp.jar"/>
</target>
Why does this assertion error occur?
ThanksAre you trying to run a EJB 2.0 bean using a EJB 1.1 DTD?
Gabriela Gonzalez wrote:
I'm getting the following error message generating the jar file for my BimPspsAdjApp
WL bean:
[java] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Couldn't
find a WLBean called "BimPspAdjApp" ]
[java] at weblogic.utils.Debug.assert(Debug.java:84)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.initialize60(CompositeMBeanDescriptor.java:218)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.init(CompositeMBeanDescriptor.java:159)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.<init>(CompositeMBeanDescriptor.java:152)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:393)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:126)
[java] at weblogic.ejb20.ejbc.EJBCompiler.setupEJB(EJBCompiler.java:128)
[java] at weblogic.ejbc20.runBody(ejbc20.java:358)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:79)
[java] at weblogic.ejbc20.main(ejbc20.java:460)
[java] Exception in thread "main" weblogic.utils.AssertionError: ***** ASSERTION
FAILED *****[ Couldn't find a WLBean called "BimPspAdjApp" ]
[java] at weblogic.utils.Debug.assert(Debug.java:84)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.initialize60(CompositeMBeanDescriptor.java:218)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.init(CompositeMBeanDescriptor.java:159)
[java] at weblogic.ejb20.deployer.CompositeMBeanDescriptor.<init>(CompositeMBeanDescriptor.java:152)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:393)
[java] at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:126)
[java] at weblogic.ejb20.ejbc.EJBCompiler.setupEJB(EJBCompiler.java:128)
[java] at weblogic.ejbc20.runBody(ejbc20.java:358)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:79)
[java] at weblogic.ejbc20.main(ejbc20.java:460)
[java] Java Result: 1
My Ant command is:
<target name = "intBimPsp">
<mkdir dir="${ejbjartmp.dir}/webserviceBim/META-INF"/>
<mkdir dir="${ejbjartmp.dir}/webserviceBim/fastway/runtime/intBimPsp"/>
<copy file="${descriptors.dir}/BimPspAdjApp-ejb-jar.xml" tofile="${ejbjartmp.dir}/webserviceBim/META-INF/ejb-jar.xml"/>
<copy file="${descriptors.dir}/BimPspAdjApp-weblogic-ejb-jar.xml" tofile="${ejbjartmp.dir}/webserviceBim/META-INF/weblogic-ejb-jar.xml"/>
<copy todir="${ejbjartmp.dir}/webserviceBim/fastway/runtime/intBimPsp/">
<fileset dir="${build.dir}/fastway/runtime/intBimPsp/"/>
</copy>
<jar jarfile="${ejbjartmp.dir}/pre_BimPspAdjApp.jar"
basedir="${ejbjartmp.dir}/webserviceBim"/>
<java classname="weblogic.ejbc20" fork="yes" dir="${ejbjartmp.dir}">
<arg line="$pre_BimPspAdjApp.jar $BimPspAdjApp.jar"/>
<classpath>
<pathelement location="/apps/bea/wlserver6.1/lib/weblogic.jar"/>
<pathelement location="${ejbjartmp.dir}/pre_BimPspAdjApp.jar"/>
</classpath>
</java>
<delete dir="${ejbjartmp.dir}/webserviceBim/"/>
<delete file="${ejbjartmp.dir}/pre_BimPspAdjApp.jar"/>
</target>
Why does this assertion error occur?
Thanks--
Rajesh Mirchandani
Developer Relations Engineer
BEA Support -
Assertion Error: Cannot Load Dyamically Generated Stub
Hi Everyone,
I am getting an Assertion Error in Weblogic 9.2, the root cause being a ClassNotFoundException for a dynamically-generated WL Stub for an Oracle JDBC wrapper. The partial stacktrace is as follows:
ASSERTION FAILED *****[Could not find dynamically generated class: 'weblogic.jdbc.rmi.internal.ResultSetImpl_weblogic_jdbc_wrapper_ResultSet_oracle_jdbc_driver_OracleResultSetImpl_920_WLStub']
Caused by: java.lang.ClassNotFoundException: weblogic.jdbc.rmi.internal.ResultSetImpl_weblogic_jdbc_wrapper_ResultSet_oracle_jdbc_driver_OracleResultSetImpl_920_WLStub
So...not sure if the RMI stub is never generated because/or there is something dorked up in my classpath re: Oracle. Any insight would be awesome
Thanks!
--JohnHi yoster,
I have the same problem, but I couldn't solve the problem by removing a war file like you did.
It's nearly the same stacktrace:
ASSERTION FAILED *****[ Could not find dynamically generated class: 'weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub' ].
java.lang.ClassNotFoundException: weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub
My database is also oracle.
Do you have other ideas that could sold this ?
I hope you do, because I'm stuck ... don't know where to look anymore :(
Toni -
Assertion Error in WL 4.5.1
Hi,
We are running WL 4.5.1 with SP 11 on NT and Oracle 8i as the database.
After the server has been running for quite a while and there is fair amount
of activity, the server throws the following exception. Any ideas about what
this exception means or why it is thrown?
Mon Sep 25 18:52:15 EDT 2000:<E> <T3Services>
java.rmi.RemoteException: --------------- nested within: ------------------
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Error.<init>(Error.java:53)
at weblogic.utils.NestedError.<init>(NestedError.java:15)
at weblogic.utils.AssertionError.<init>(AssertionError.java:49)
at weblogic.utils.Debug.assert(Compiled Code)
at weblogic.ejb.internal.LRUCache.remove(Compiled Code)
at weblogic.ejb.internal.StatefulEJBCache.unbind(Compiled Code)
at weblogic.ejb.internal.BaseEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.EntityEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.StatefulEJBObject.getContextForInvoke(Compiled
Code)
at weblogic.ejb.internal.BaseEJBObject.preInvoke(Compiled Code)
at sync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
at sync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(Compiled Code)
at sync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
; nested exception is:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at java.rmi.RemoteException.<init>(Compiled Code)
at weblogic.ejb.internal.BaseEJBObject.postInvoke(Compiled Code)
at sync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
at sync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(Compiled Code)
at sync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)This turned out to be our fault - we were told that the servers are running
sp11 but when we later checked using the admin tool, we found that wasn't
the case on this machine. sp11 was in the classpath but the directory was
wrong. I guess that's the downside to the way WL SPs work, the jvm doesn't
tell you when you have an invalid filename in the classpath so you don't
know that you are not actually running with the sp.
On the thread issue you mention, the traceback below originates in a startup
class which does manage its own threads. Isn't this a valid way to invoke
beans in weblogic?
"Rob Woollen" <[email protected]> wrote in message
news:[email protected]...
It's hard to say why you're seeing this assertion error. I would
suggest that you contact [email protected]
However, I can see that you are using your own threads within the
WebLogic server. This is not allowed and might be the cause of your
problems.
-- Rob
SG wrote:
Hi,
We are running WL 4.5.1 with SP 11 on NT and Oracle 8i as the database.
After the server has been running for quite a while and there is fair
amount
of activity, the server throws the following exception. Any ideas aboutwhat
this exception means or why it is thrown?
Mon Sep 25 18:52:15 EDT 2000:<E> <T3Services>
java.rmi.RemoteException: --------------- nestedwithin: ------------------
>>
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Error.<init>(Error.java:53)
at weblogic.utils.NestedError.<init>(NestedError.java:15)
at weblogic.utils.AssertionError.<init>(AssertionError.java:49)
at weblogic.utils.Debug.assert(Compiled Code)
at weblogic.ejb.internal.LRUCache.remove(Compiled Code)
at weblogic.ejb.internal.StatefulEJBCache.unbind(Compiled Code)
at weblogic.ejb.internal.BaseEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.EntityEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.StatefulEJBObject.getContextForInvoke(Compiled
Code)
at weblogic.ejb.internal.BaseEJBObject.preInvoke(Compiled Code)
atsync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
atsync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(CompiledCode)
atsync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
; nested exception is:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at java.rmi.RemoteException.<init>(Compiled Code)
at weblogic.ejb.internal.BaseEJBObject.postInvoke(Compiled Code)
atsync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
atsync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(CompiledCode)
atsync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code) -
Troubles using EJBDeployment tool : perpetual assertion errors.
I'm trying to deploy an EJB using the Weblogic 510 EJBDeployment tool.
I've got a Remote interface, an EJB class and a home interface in a
directory called
d:\EJBDemos.
The classes are not in packages.
When I try to create the jar file, no matter where I try to create it, I get
an assertion error on the console which says something along the lines of:
File root of D:/EJBDemos is not a prefix for file
d:/EJBDemos/RoleEJB.class ]
(in this particular example, I was trying to create a d:\test.jar )
and then throws a whole bunch of swing exceptions.
I have also tried this on another Entity bean, and exactly the same thing
happened.
I got it to create the jar file the very first time I attempted it, but the
classes were wrong, so I tried to create a new one and have had this problem
every time. Any ideas?I'm trying to deploy an EJB using the Weblogic 510 EJBDeployment tool.
I've got a Remote interface, an EJB class and a home interface in a
directory called
d:\EJBDemos.
The classes are not in packages.
When I try to create the jar file, no matter where I try to create it, I get
an assertion error on the console which says something along the lines of:
File root of D:/EJBDemos is not a prefix for file
d:/EJBDemos/RoleEJB.class ]
(in this particular example, I was trying to create a d:\test.jar )
and then throws a whole bunch of swing exceptions.
I have also tried this on another Entity bean, and exactly the same thing
happened.
I got it to create the jar file the very first time I attempted it, but the
classes were wrong, so I tried to create a new one and have had this problem
every time. Any ideas? -
I have just started using the Jexcel api. an i am in trouble.
I copied the following code from the jExcel faq on sourceforge.
for (int i = 0 ; i < numrows ; i++)
for (int j = 0 ; j < numcols ; j++)
readCell = sheet.getCell(i, j);
newCell = readCell.copyTo(i, j);
readFormat = readCell.getCellFormat();
newFormat = new WritableCellFormat(readFormat);
newCell.setCellFormat(newFormat);
newSheet.add(newCell);
}I added the necessery code. and it compiled without a problem. but
when i ran the program this line
newFormat = new WritableCellFormat(readFormat);gave a assertion error.
another problem is i was trying to change the orientation .usiong
Orientation.setOrientation(getOrientation(int));there was no effect on the display. and I could not find any examples specific to this.
any help is appreciatedHi yoster,
I have the same problem, but I couldn't solve the problem by removing a war file like you did.
It's nearly the same stacktrace:
ASSERTION FAILED *****[ Could not find dynamically generated class: 'weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub' ].
java.lang.ClassNotFoundException: weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub
My database is also oracle.
Do you have other ideas that could sold this ?
I hope you do, because I'm stuck ... don't know where to look anymore :(
Toni -
Hi,
When I want to deploy my application on Bea Weblogic Server 8.1 SP4, I get the following error:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion violated ]
at weblogic.utils.Debug.assertion(Debug.java:47)
at weblogic.j2ee.dd.J2EEDeploymentDescriptor.addJavaModule(J2EEDeploymentDescriptor.java:264)
at weblogic.j2ee.dd.xml.J2EEDeploymentDescriptorLoader_J2EE12.__post_3849685(J2EEDeploymentDescriptorLoader_J2EE12.java:412)
at weblogic.j2ee.dd.xml.J2EEDeploymentDescriptorLoader_J2EE12.postProc(J2EEDeploymentDescriptorLoader_J2EE12.java:248)
at weblogic.xml.process.ProcessorDriver.postProc(ProcessorDriver.java:211)
at weblogic.xml.process.ProcessorDriver.endElement(ProcessorDriver.java:94)
at weblogic.apache.xerces.parsers.AbstractSAXParser.endElement(AbstractSAXParser.java:577)
at weblogic.apache.xerces.impl.xs.XMLSchemaValidator.endElement(XMLSchemaValidator.java:710)
at weblogic.apache.xerces.impl.XMLNamespaceBinder.endElement(XMLNamespaceBinder.java:647)
at weblogic.apache.xerces.impl.dtd.XMLDTDValidator.handleEndElement(XMLDTDValidator.java:1937)
at weblogic.apache.xerces.impl.dtd.XMLDTDValidator.endElement(XMLDTDValidator.java:851)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XMLDocumentFragmentScannerImpl.java:1008)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1469)
at weblogic.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:329)
at weblogic.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:525)
at weblogic.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:581)
at weblogic.apache.xerces.parsers.XMLParser.parse(XMLParser.java:152)
at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1175)
at weblogic.xml.jaxp.WebLogicParser.parse(WebLogicParser.java:67)
at weblogic.xml.process.ProcessorDriver.process(ProcessorDriver.java:137)
at weblogic.j2ee.dd.xml.J2EEDeploymentDescriptorLoader_J2EE12.process(J2EEDeploymentDescriptorLoader_J2EE12.java:147)
at weblogic.j2ee.dd.xml.DDUtils.processXML(DDUtils.java:369)
at weblogic.j2ee.dd.xml.DDUtils.processXML(DDUtils.java:322)
at weblogic.j2ee.dd.xml.DDUtils.loadStdDescriptor(DDUtils.java:217)
at weblogic.j2ee.dd.xml.DDUtils.loadDeploymentDescriptor(DDUtils.java:181)
at weblogic.j2ee.J2EEApplicationContainerFactory.createMBeansForEar(J2EEApplicationContainerFactory.java:539)
at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:493)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:854)
at weblogic.management.deploy.DeployerRuntime.access$000(DeployerRuntime.java:69)
at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:1532)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.management.deploy.DeployerRuntime.checkAndPerformDeployerActions(DeployerRuntime.java:1523)
at weblogic.management.deploy.DeployerRuntime.activate(DeployerRuntime.java:192)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
at weblogic.management.runtime.DeployerRuntimeMBean_Stub.activate(DeployerRuntimeMBean_Stub.java:1139)
at weblogic.management.console.actions.mbean.ApplicationDeployAction.prePerform(ApplicationDeployAction.java:179)
at weblogic.management.console.actions.mbean.DoMBeanWizardAction.perform(DoMBeanWizardAction.java:215)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:173)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
>
Any idea why this error is given and how to solve it? I don't think there is an error in my application, because it runs fine on Orion server.
The error is in a jar with:
-14 entity beans
-2 session beans with a relation to the entity beans
-session beans also with a relation to the other, but removing this relation does not help.I've hit assertion errors before. There is only one way I know of to isolate them.
Create a copy of your work so you don' disturb what you have now (the stuff that works on Orion).
Comment everything out of your ejb-jar and weblogic DD files so you have a trivial (e.g. one session bean) application. Add more things to the deployment one step at a time, redeploying at each step.
Then, when you get to the components or relationships
that cause the assertion failure, delete things one by one until you have the smallest number of components that cause the problem.
Then contact weblogic. If you aren't the first person who hit the problem, and ask nicely, they may cut a little patch for you containing code with the fix.
Not hard for them if they already did it for somebody else. Takes a lot longer if they actually have to
figure out what to fix first (and you best have a paid up support contract if it is a new problem). -
Assertion Error during hot deployment in WLS6.1
Hi,
I am using WLS6.1SP2. The hot deployment feature is enabled. But when I try to
redeploy the bean, it gives the following
assertion error. Somehow the hot deployment doesn't seem to work.
Following is the stack trace:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
at com.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
at com.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize be
fore invoke ]]
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
at com.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
throwable exception in BaseServlet weblogic.rmi.extensions.RemoteRuntimeExcepti
on - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize be
fore invoke ]]
throwable exception message nullAre you deployed in an EAR? If so, this is probably a hot redeploy bug.
Report to [email protected].
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Atul Sapkal" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
I am using WLS6.1SP2. The hot deployment feature is enabled. But when Itry to
redeploy the bean, it gives the following
assertion error. Somehow the hot deployment doesn't seem to work.
Following is the stack trace:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ mustinitialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
atweblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
atcom.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
atcom.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ mustinitialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
atweblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
atcom.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
atcom.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must
initialize be> fore invoke ]
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
atcom.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
atcom.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
throwable exception in BaseServletweblogic.rmi.extensions.RemoteRuntimeExcepti
on - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must
initialize be> fore invoke ]
throwable exception message null -
Help needed regarding Assertion Error
Hi all,
Iam new to using weblogic.Iam using weblogic 5.1.Iam trying to develop a BMP.I
have a separate class for the primary key.I have implemented the equals and hashcode
methods as follows :
public boolean equals(Object o){
if (o instanceof PartitaPrenotataPK) {
PartitaPrenotataPK otherKey = PartitaPrenotataPK)o;
try {
boolean result =(utc.isUguale(otherKey.utc) && (contoCash.equals(otherKey.contoCash)));
System.out.println("RESULT IS : " + result);
return result;
} catch (Exception e) {
e.printStackTrace();
return false;
} else
return false;
the hashcode method :
public int hashCode() {
if (-1 == m_hashCode) {
m_hashCode = utc.hashCode() ^ contoCash.hashCode();
System.out.println("HASH CODE RESULT " + m_hashCode);
return m_hashCode;
Iam getting an Assertion error.What actually is an Assertion error.The stack trace
is :
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ *** The EJB Lock
Manager has detectected that the implementation of:
public int hashCode();
or
public boolean equals(Object o);
in the class: it.sella.finanza.gestione_partite_prenotate.pphosthandler.PartitaPrenotataPK
is incorrect.
at weblogic.ejb.internal.LockManagerImpl.unlock(LockManagerImpl.java:187)
at weblogic.ejb.internal.StatefulEJBCache.unbind(StatefulEJBCache.java:555)
at weblogic.ejb.internal.StatefulEJBCache.releaseEJBContext(StatefulEJBCache.java:361)
at weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulEJBHome.java:279)
at weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulEJBHome.java:258)
atThere was a bug where this AssertionError was fired incorrectly. You
may wish to ensure you have the latest 5.1 service pack.
Otherwise, you'll have to show me your full pk class for me to tell you
if your equals and hashCode are implemented correctly.
-- Rob
chandrasekar wrote:
Hi all,
Iam new to using weblogic.Iam using weblogic 5.1.Iam trying to develop a BMP.I
have a separate class for the primary key.I have implemented the equals and hashcode
methods as follows :
public boolean equals(Object o){
if (o instanceof PartitaPrenotataPK) {
PartitaPrenotataPK otherKey = PartitaPrenotataPK)o;
try {
boolean result =(utc.isUguale(otherKey.utc) && (contoCash.equals(otherKey.contoCash)));
System.out.println("RESULT IS : " + result);
return result;
} catch (Exception e) {
e.printStackTrace();
return false;
} else
return false;
the hashcode method :
public int hashCode() {
if (-1 == m_hashCode) {
m_hashCode = utc.hashCode() ^ contoCash.hashCode();
System.out.println("HASH CODE RESULT " + m_hashCode);
return m_hashCode;
Iam getting an Assertion error.What actually is an Assertion error.The stack trace
is :
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ *** The EJB Lock
Manager has detectected that the implementation of:
public int hashCode();
or
public boolean equals(Object o);
in the class: it.sella.finanza.gestione_partite_prenotate.pphosthandler.PartitaPrenotataPK
is incorrect.
at weblogic.ejb.internal.LockManagerImpl.unlock(LockManagerImpl.java:187)
at weblogic.ejb.internal.StatefulEJBCache.unbind(StatefulEJBCache.java:555)
at weblogic.ejb.internal.StatefulEJBCache.releaseEJBContext(StatefulEJBCache.java:361)
at weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulEJBHome.java:279)
at weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulEJBHome.java:258)
at -
Cc got assertion error, when compiling emacs-23.3
I got an assertion error with cc as follows, when compiling emacs-23.3.
It compiles fine without the "-O" option.
I can provide a CPP processed file which reproduces it.
;; I could not find a place to report bugs, and I put it here.
;; Sorry if it is not an appropriate place.
% cc -V
cc: Sun C 5.12 SunOS_i386 2011/11/16
% cc -c -Demacs -DHAVE_CONFIG_H -I. -I/work/emacs/emacs-23.3/src -I/usr/dt/include -g -O font.c
"font.c", line 185: warning: integer overflow detected: op "<<"
"font.c", line 197: warning: integer overflow detected: op "<<"
"font.c", line 215: warning: integer overflow detected: op "<<"
"font.c", line 2995: warning: integer overflow detected: op "<<"
"font.c", line 3422: warning: integer overflow detected: op "<<"
"font.c", line 3920: warning: assignment type mismatch:
pointer to char "=" pointer to unsigned char
"font.c", line 3945: warning: assignment type mismatch:
pointer to char "=" pointer to unsigned char
"font.c", line 4026: warning: integer overflow detected: op "<<"
assertion failed in function pg_first_pass_do_block_rec() @ post_gen.c:3758
assert(blk_sp_offset_(nextb) == (current_offset + get_prologue_size() + BITS2BYTES(be_cur_local_size)))
cc: ube failed for font.cGot it ...
Reduced testcase:
% cat c.c
enum Lisp_Type
Lisp_Int0 = 0,
Lisp_Float = 7,
struct Lisp_Float
union
double data;
struct Lisp_Float *chain;
} u;
struct Lisp_Vector
unsigned int size;
struct Lisp_Vector *next;
int contents[1];
int
font_unparse_xlfd (font, pixel_size, name, nbytes)
int font;
int pixel_size;
char *name;
int nbytes;
char *f[21];
int val;
int i, j, len = 0;
val = ( ( struct Lisp_Vector * ) ( ( unsigned int ) ( ( ( font ) ) & ( ( ( ( int ) 1 ) << ( 32 - 3 ) ) - 1 ) ) ) ) -> contents [ 5 ];
if ( ( ( ( enum Lisp_Type ) ( ( ( unsigned int ) ( ( val ) ) ) >> ( 32 - 3 ) ) ) == Lisp_Float ))
i = ( ( ( void ) 0 , ( struct Lisp_Float * ) ( ( unsigned int ) ( ( val ) & ( ( ( ( int ) 1 ) << ( 32 - 3 ) ) - 1 ) ) ) ) -> u . data + 0 ) * 10;
f[2] = __builtin_alloca ( 12 );
else
f[2] = "*-*", len += 4;
% cc -g -O c.c -V
cc: Sun C 5.12 SunOS_i386 2011/11/16
acomp: Sun C 5.12 SunOS_i386 2011/11/16
"c.c", line 41: warning: implicit function declaration: __builtin_alloca
"c.c", line 41: warning: improper pointer/integer combination: op "="
iropt: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
ir2hf: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
ube: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
assertion failed in function pg_first_pass_do_block_rec() @ post_gen.c:3758
assert(blk_sp_offset_(nextb) == (current_offset + get_prologue_size() + BITS2BYTES(be_cur_local_size)))
cc: ube failed for c.c
Bug 7167252 filed. If we find a work-around I'll post it. -
We have a multithreaded CVI app (~20 threads) running on a PXIe-8135 (4 CPUs). The application never gets done starting all the threads before blue-screening with the following error:
Scheduler Asser: __1276
Scheduler Assertion Error: 80000004
Interrupt Disabled. Scheduler Enabled. ....
More details:
System
Chassis 1 PXIe-1085:
PXIe-8135 Controller
PXI-6704 (7 of them), initialize properly, thread runs successfully until blue screen
PXI-8431/8 (8 of these, total of 64 RS422 channels, about 40 being used currently for test), it is during the starting of these threads (one for each board) that it blue screens
PXIe-8374 (for using Chassis 2 as an extension of Chassis 1)
Chassis 2 PXIe-1075:
PXI-8370 (connected to PXIe-8374)
PXI-6528 (1) threads run fine
PXI-6529 (4) threads run fine
NI-8234 (4) not used currently
The scheduler error happens at different times, but always during the starting of the RS422 threads. Can anybody give a hint as to why the Scheduler Assertion Error occurs, and particularly this specific error?Hi,
I have a couple of questions for you.
1) Has this application ever worked?
2) Can you attempt to replicate this issue with less RS422 channels? Basically, is there a maximum number of RS422 channels where the error is received, or if you had only 1 channel being used, would the error still happen?
3) Do you have another PXIe controller that you can try?
4) Did anything change in your system that would have caused the error?
Kevin S
Applications Engineer
National Instruments -
i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
and ideas on how to fix the problem
tk
bigguy1965Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush -
When exporting html and viewing locally we receive the following error... This error disappears after removing menu from top of page. This error does not occur when viewed on Outdoors360.businesscatalyst.com (our temporary site)
Muse JS Assert: Error calling selector function:Type error: Object has no method Muse Menu
Any ideas??I fix the problem.
I have carefully reviewed JAVASCRIPT files and I could see that these are not a major influence within the site, only are reference code and utilities of the same application.
By removing these files nothing has stopped working, I thought I would have some error in the sliders, or opacities, but no, nothing happened.
DELETE IT
FRANCISCO CATALDO DISEÑADOR GRÁFICO -
Assert error in __memp_fget under OS X/Linux using TXN_SNAPSHOT
Hi all,
Hopefully this is a good place to file a bug report. I've been hunting down the cause of a core dump for a couple of weeks and have finally reduced it to a [small example|http://home.comcast.net/~jonathanmeredith/bugrpt.tar.gz] (I couldn't find a way to attach it to the message).
README from the tarball:
The code sample enclosed causes BDB to die with an assertion error. This is the minimal
code that causes the bug, stripped down from an Erlang port driver. It may look strange
and ugly, but it only exists to reproduce the bug.
To reproduce expand the tarball into a directory containing the BDB tarball and run make.
It will compile the library and test code then start looping through the test code. The
assertion usually occurs anywhere between 1 and 50 iterations through the test code.
The bug occurs under Mac OS X 10.5.7 (9J61) running on an 8 core [email protected] mac pro,
8Gb RAM, compiled with i686-apple-darwin9-gcc-4.2.1 and under Debianl Lenny on
4 core Xeon 5160 @ 3.00GHz, 8Gb RAM, libc 2.7-18, gcc (Debian 4.3.2-1.1) 4.3.2.
Expected output:
assert failure: ../dist/../mp/mp_fget.c/257: "bhp != NULL"
0 bugrpt 0x001284c1 __os_stack + 38
1 bugrpt 0x00124bce __os_abort + 17
2 bugrpt 0x000ba786 __db_assert + 66
3 bugrpt 0x0010f365 __memp_fget + 2274
4 bugrpt 0x0000acff __bamc_rget + 4421
5 bugrpt 0x0000923f __bam_bulk_duplicates + 5534
6 bugrpt 0x000b229d __dbc_put + 4515
7 bugrpt 0x000a0d9f __db_put + 639
8 bugrpt 0x000bf7c1 __db_put_pp + 606
9 bugrpt 0x000023bf start + 723
10 bugrpt 0x00002492 bug200 + 70
11 libSystem.B.dylib 0x91e37155 pthreadstart + 321
12 libSystem.B.dylib 0x91e37012 thread_start + 34
./loopbug: line 20: 52562 Abort trap ../bugrpt
Removing the TXN_SNAPSHOT options makes the bug go away. So does changing the size of the 'put' value.
Reducing the number of the THREADS #define increases the number of iterations required to hit the assert.
On the 4-core Debian box it took 377 reps with THREADS=2Hi Jon,
Thanks for a great test case, this made our job a little easier! If you could please send me an email to: michael dot brey at oracle dot com, I will respond to you with a patch of this issue for 4.7.
Regards,
Mike Brey, Oracle Berkeley DB -
IDCS2, WIN: Assert error reason
Hi Guys,
I got a assert error, "~InstanceList(): 3 outstanding references to UID 172 (Class kTextStoryBoss).", I don't know the reason, do you guys know that?
Thanks,The number of AddRef() and Release() on that object does not match. This is usually found while closing your document database.<br /><br />Search your code for:<br /><br />IFace1* p = ... Query ... ()<br />InterfacePtr<IFace2> p2 ( ... Query ..., IID_...FACE2/UseDefault... )<br /><br />... with any of the interfaces on the reported boss class.<br />Methods such as Query...() and Create...() both imply an AddRef, only some of the InterfacePtr<> constructors are meant for those, while others will call AddRef themself.<br />Of course if you use AddRef() yourself, also check those for matching Release().<br /><br />Dirk
Maybe you are looking for
-
How to center a page for all browsers?
Could someone take a look at my code and tell me why the page isn't centered. When I'm at a school computer, the page is centered for Internet Explorer, but not for Chrome or Firefox. When I am on my home computer, the page isn't centered for any bro
-
I would like my wife to see my calendar on her mac from my iPad so she knows my work movements and can add in any important events I need to be aware of at home. Can I do this without upsetting her mac/iPhone arrangement and without sync of contacts
-
I've upgraded to iOS6 but can't browse the iTune store. I can updated the apps but just can't browse. It says "Cannot conect to iTunes Store"
-
Web Service/ JDBC question
Hi, I have to design an automatic -and periodic- process that performs next tasks: 1) Read Oracle table to build a XML file 2) Connect with a Web Service and send the XML. (In the specification says that SOAP with attachments is not supported , so we
-
Schema Based XML View Question
Hi, Is there a way to use the OBJECT ID value in the view's WHERE clause? For example: create or replace view xml_view of XMLTYPE XMLSCHEMA "http://yo.orf/sample.xsd" ELEMENT "el" WITH OBJECT ID ( extract('/el/@id').getNumberVal()) FROM columns( l.id