Weblogic Data source list in adf

Hi Gurus,
I am using jdev 11.1.2.3 and weblogic 10.3.6. I want to get list of all data sources available in the weblogic from adf.
Thanks in advance

You'll need to find the Java API that will let you access this from the WebLogic side.
This might be a good start:
http://docs.oracle.com/cd/E28280_01/web.1111/e13737/config.htm#i1069587

Similar Messages

Data Source configuration for ADF BC application

Hi,
I am working on a POC using ADF BC.
I want to configure a data source in weblogic server and want to connect to that data source in my ADF BC application.
Please let me know how and where to configure this data source in ADF BC app.
Thanks,
Praveen

Praveen,
Right-click your Application Module, choose "configurations" Then, you can edit your configuration to specify a data source instead of JDBC URL.
[url http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcservices.htm#CHDJDBJB]The documentation can tell you more.
John

Can't see my Oracle stored procedure in the avalable data source list

Post Author: Moori
CA Forum: Data Connectivity and SQL
Hello All,
I've created an Oracle stored procedure which I need to use it's returned data in my crystal report but I can't find it in the data source list.
I'm using the same schema & database and user as my sp was created on.
Please advise.
Moori

Jim (also Geoff and Hal)-
Still haven't solved this. Here's another try at a screenshot, showing just below this text for me, of my Library interface showing the C drive listed in the left panel and not showing the C drive contents. Only, as you said is intended, what is already in Lightroom.
I thought if I was not in "Catalog" I had been able, in the past, to select from anything in my C crive simply by opening that folder in the panel.
When I click import it is usually - from memory - to start the import of the already selected items. For a time that's what was happening from the above screen if I selected Import. It would apparently start re-importing the selected items and without presenting the usual familiar dialog asking about file naming, etc. Now, however, clicking Import bring up this:
Never saw this black horizontal dialog box before this situation arose. I was able to import but not as usual and I would like to get back the square (moreso at least) "white" dialog box. No clue what's going on or how to get bact to familiar ground. Ideas?

How to connect to weblogic data source using jndi name?

I am trying to connect to database using data source look up from weblogic as below:
factory = "weblogic.jndi.WLInitialContextFactory"
conn = zxJDBC.lookup('ApplicationDB',INITIAL_CONTEXT_FACTORY=factory)
this is throwing DatabaseError:
however i can connect to the db using uname, pwd and url. its working fine using zxJDBC in jython.
any clue why the first one is failing?

import java.sql.*;
import javax.sql.*;
import javax.naming.*;
import java.util.*;
public class MyDataSourceLookupClient
     public final static String JNDI_FACTORY = "weblogic.jndi.WLInitialContextFactory";
     private static String serverUrl ="t3://localhost:7001";
public static void main(String ar[])throws Exception
InitialContext ic=null;
try{
          Hashtable env = new Hashtable();
          env.put(Context.INITIAL_CONTEXT_FACTORY, JNDI_FACTORY);
          env.put(Context.PROVIDER_URL, serverUrl);
          ic = new InitialContext(env);
catch(Exception e){}
try{
DataSource ds=ic.lookup("YourDataSourceJNDIName");
Connection con=ds.getConnection();
System.out.println("\n\t Got Connection: "+con);
con.close();
catch(Exception e)
System.out.println("\n\n\t jack Exception => "+e);
e.printStackTrace();
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Weblogic Data source is not releasing connections

Hi All,
Weblogic JDBC data source is not releasing connection until JDBC connection is deleted and created again. Could you please let me know this is a database issue or weblogic jdbc driver issue. We are using weblogic 10.1. Please see the following xml for JDBC driver.
Although maximum connections are set to 300, it stills keeps increasing connections over 300. This issue is resolved only when jdbc data source is deleted and created again.
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/920 http://www.bea.com/ns/weblogic/920.xsd">
<name>abc_admin_STGNCB</name>
<jdbc-driver-params>
<url>jdbc:oracle:thin:@10.151.43.54:1521:STGNCB</url>
<driver-name>oracle.jdbc.OracleDriver</driver-name>
<properties>
<property>
<name>user</name>
<value>abc_admin</value>
</property>
<property>
<name>portNumber</name>
<value>1521</value>
</property>
<property>
<name>SID</name>
<value>STGNCB</value>
</property>
<property>
<name>serverName</name>
<value>10.151.43.54</value>
</property>
</properties>
<password-encrypted>{3DES}wc5vg5GIbPtt+b8vWY0i5Q==</password-encrypted>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<initial-capacity>20</initial-capacity>
<max-capacity>300</max-capacity>
<capacity-increment>10</capacity-increment>
<connection-creation-retry-frequency-seconds>30</connection-creation-retry-frequency-seconds>
<statement-cache-size>200</statement-cache-size>
<pinned-to-thread>true</pinned-to-thread>
<identity-based-connection-pooling-enabled>true</identity-based-connection-pooling-enabled>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>jdbc/ABC_TX_DATASOURCE</jndi-name>
<jndi-name>jdbc/ABC_NON_TX_DATASOURCE</jndi-name>
<jndi-name>jdbc/ABC_TX_EVENT_DATASOURCE</jndi-name>
<jndi-name>jdbc/ABC_NON_TX_EVENT_DATASOURCE</jndi-name>
<jndi-name>jdbc/ABC_DATASOURCE</jndi-name>
<jndi-name>abc.cdb.DataSource</jndi-name>
<global-transactions-protocol>EmulateTwoPhaseCommit</global-transactions-protocol>
</jdbc-data-source-params>
</jdbc-data-source>
Edited by: bpenugon on Aug 24, 2010 8:02 AM

The root cause is pinned-to-thread is enabled. When the application finishes using the connection and calls connection.close(), WebLogic Server keeps the connection with the execute thread and does not return it to the connection pool. The connection pool maximum capacity is ignored when pinned-to-thread is enabled. So you saw the number of connections in connection pool keeps increasing over 300.
Set pinned-to-thread to false can solve the problem.

Access ODBC Driver not appearing in Create New Data Source List

When I run C:\Windows\SysWOW64\odbcad32.exe the Access driver is not showing up as an option. I'm running Windows 7 professional and Access 2013. I'm guessing the driver is on my machine and is either not registered or the registry
has the wrong location. I have looked under HKEY_LOCAL_MACHINE>ODBC>ODBCINST.INI and see no references to an Access driver in any subfolders.
I think I need the name of the driver .dll and where it needs to be registered to fix the problem.
Any ideas?
Thanks,
Joe

Hi Joe,
According to your description, after you run C:\Windows\SysWOW64\odbcad32.exe, Access driver is not displayed when you expand HKEY_LOCAL_MACHINE>ODBC>ODBCINST.INI node.
The issue is caused by wrong path of odbccad32, please make sure that you are using Administrator account or you have administrative privileges, then refer to the following steps:
Go to Control Panel.
Click Administrative Tools.
Right-click Data Sources(ODBC) to open Properties dialog box.
In Target text box, type %windir%\syswow64\odbcad32.exe
In Start in text box, type %windir%\syswow64, then click OK to save the settings.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Weblogic data source

Connection test failed.
Message icon - Error Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:280)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:482)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:156)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:101)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
Edited by: duryodhan on Feb 9, 2013 6:25 PM

Hi,
Check,
http://www.coderanch.com/t/585051/JDBC/databases/Listener-refused-connection-error-ORA
Check your TNS entries or correctness of your connection details. (SID, IP, Schema name , ect )

ODS as data source for the next ODS - can't see the name in the DS list

Hello, experts!
Need your help. I'm trying to use Staging ODS for the transaction data to populate data into next level of ODS - Standard ODS. The problem is that Staging ODS does not appear in the Data Source list for the Standard ODS when I Assign data sources(and would not let me paste the Staging ODS data source name either). I did Replicate data source for the Staging ODS and Generate Export data sources but it did not fix the problem.
Any suggestions?
Thank you.
Alina.

OK, you're talking about the selection screen "Available datasources" showing only 50 entries right?
In my system the screen can show more than 900... must be one of your user settings in the gui...
just under the tab "restrictions" there is a line with an arrow pointing down; click this line to expand the restrictions...
In the DataSource field enter 8* or 8<ODS_TECH_NAME> in order to see your DSource.
Otherwise in RSA13 in your Dsources overview, right click it and "assign infosource"; it will also make it...
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 30, 2008 6:31 PM

Health App Lists Itself and iPhone as a Data Source

I use FitBit to track my steps. I also use the Sync Solver app which syncs data from FitBit to Apple's Health app. When I open the Apple Health app and look at the list of data sources for Steps, there are 3 data sources listed:
Sync Solver
iPhone 5s
Health
Sync Solver is at the top of the list because it's the app that I want to take priority over all other data sources. But I don't understand the difference between "Health" and "iPhone 5s".
I assume that "iPhone 5s", when listed as a data source, means the data gathered from the phone's built-in motion sensor. But what is "Health"? Why is it listed as a data source for Steps? It's like the Health app is using itself as a data source, which doesn't make sense to me.
This same phenomenon is true when looking at the data sources for Walking + Running Distance - both "Health" and "iPhone 5s" are listed as data sources for that particular metric.
Coincidentally, neither "Health" nor "iPhone 5s" appear on the main Sources tab for the Health App (i.e., the master list of apps that are sources of data for the Health App).
Does anyone know the difference between "Health" and "iPhone 5s" as data sources?
P.s. - "iPhone 5" is simply the name of my iPhone. This would be listed differently depending on what your iPhone is named (e.g., "Eric's iPhone", etc.).

ArrayCollection is a view of a source array or ArrayList. You can have multiple views of the same data by assigning the .list of one AC to another AC.
You can create a separate hashmap of ID's to indices in that other AC
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

How to create Hive data source?!!

I am trying to create hive data source connection.
I am stack on creating connection profile and configuring "Generic JDBC Driver" .. after i added drivers i keep getting " Required property in driver definition missing value: Driver Class." error.
I am adding a screenshot with the list of drivers.

Kevin
In Jdbc node create a Jdbc Connection Pool with the
Url=jdbc:borland:dslocal:/jbuilder6/samples/Ejb/db/esite.jds
and driver=com.borland.datastore.jdbc.DataStoreDriver. Create a Datasource
using a Jndi & Jdbc Connection Pool.
Deepak
Kevin Gao wrote:
in jbuilder6 samples instructions,there is instruction as:
Create a WebLogic data source named ESiteSource. You will need to check
your WebLogic documentation on how to create a data source. You will need
the following settings
1.The database URL should be of the following format:
jdbc:borland:dslocal:/jbuilder6/samples/Ejb/db/esite.jds, ensuring that you
have the correct path to esite.jds.
2.The driver will be com.borland.datastore.jdbc.DataStoreDriver.
3.This JDataStore is not password protected, but you must still specify a
user; any user will do, e.g., user=Frank;password=
but how to create a data source in weblogic?
help me please!
thanks in advance!
Kevin Gao
EMAIL:[email protected]

MS Report Builder Data Source Missing

Hi,
Simply, when I log onto my server with a local or domain admin and open report Builder, I right click
on Data Sources and choose add. I choose the one (only one) in the list and test (successfully) the connection.
However, no other users see the Data source and trying to create one fails. They are local administrators. They have been added as admins in SQL and the DBs. I have rechecked all the permissions and the user has full admin rights to the server, SQL and DBs.

Hi Analog-Kid,
According to your description, when users click “Edit in Report Builder” on report server to launch click-once report builder, if users want to add a shared data source, they can’t see the shared data source list which resides on the report server, right?
In your scenario, please check if those users could access the Data Sources folder on the report server. If not, please grant users permission to access this folder with Content Manager role on Security page. Also please connect to report server instance
from SSMS, then check if Manage data sources has been selected.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Instant client installation unavailable in ODBC data sources

I'm trying to install instant client to enable MS Excel to access an Oracle database. OS is Windows 7.
After installing instant client plus the odbc package, I can't see a new entry in the odbc data sources - only the standard Microsoft sources (Excel, Access, SQL Server) show up.
There's also an Oracle SQL developer installation on my computer. Connection to the database works fine in SQL developer - so the DB does exist and it is accessible.
Steps conducted during instant client installation:
- Downloaded basic lite instant client (11.2.0.3.0) for windows.x64
- Downloaded odbc package for windows.x64
- unpacked zip file to instantclient directory
- executed the odbc_install.exe in the instantclient directory. I'm not sure if this install.exe does anything at all. There was no error message but also no confirmation or reaction of any kind.
- executing the install file from the cmd window gave me a message, that the odbc drivers were already installed. So I guess odbc_install.exe was executed properly
- setting some system variables
     1) path variable: added instantclient directory to the ones already listed in path
     2) tns_admin: new entry, pointing to instantclient directory
     3) ld_library_path: new entry, pointing to instantclient directory
- wrote an tnsnames.ora file using the connect information also used in SQL developer
- saved tnsnames.ora file in instantclient directory
- rebooted computer to activate changes
When opening the odbc data source administration, I'm only able to see Microsoft drivers for Access, Excel, SQL Server. I'd expect to get an Oracle driver option to add to the installed drivers.
Wild & uneducated guesses about what might cause the problem:
- IC is installed on E: drive. Maybe some component is expected to be saved on C: (low likelihood, many others would have complained by now)
- Win 7 often asks for explicit permission to do this or that via popup windows. Maybe the odbc-component encounters such a request ans says "Ummm....???"
Any idea, what I might try to get an oracle entry in the odbc data source list?
Best regards
Peter
Edited by: 1003309 on 30.04.2013 05:33

I'm not sure to be honest, but what I downloaded did not have a setup.exe.
Does what you're talking about allow you to connect to Oracle databases via ODBC? If so, is it downloadble from the Oracle site?

How to add collection to report as data source

Hi all,
i'm trying to add collection to report as data source:
List<DmsLockingItem> items;
ReportClientDocument rcd = new ReportClientDocument();
DatabaseController dbc = rcd.getDatabaseController();
dbc.setDataSource(items, DmsLockingItem.class, "tName","tName");
this works with com.businessobjects.crystalreports.sdk but not with rasapp.jar.
And i can't use plugin lib in my current project.
can anyone help please?
Greetings,
Nikolas

The setDatasource expects the object passed to either be a DataSet, java.sql.ResultSet, IXMLDataSet, or BusinessView object. Are you able to convert your collection to one of these?

Health App Data Source Order With Apple Watch-

I discovered a very large difference between the number of steps counted by Health App and my other step tracking app Pacer. Pacer was indicating I had 10,000 steps while HealthKit was reporting about 6000 steps.
I then realized this was happening because of the order my data sources were for steps. The order was:
Apple Watch
iPhone
The problem is, the Apple watch does not track cycling as steps while the iPhone does. Because of this, when the Apple Watch is first in the data source list for steps it doesn’t count those cycling “steps”. I find this odd since Health App should be smart enough to merge the results; if the watch is reporting no steps and the iPhone is reporting 4000 steps, it should add the iPhone’s steps to the total.
But, if I go in and change the priority order to:
iPhone
Apple Watch
then, HealthKit reports the correct 10,000 steps.
The strange thing is, if I’m not carrying my iPhone and have my watch on, HealthKit does properly merge the watch's steps into Health App even though the Apple Watch is second on the priority list.
I’m not sure if this is a bug or a feature, but it’s important to make sure your data sources are in the correct order. I’ve gone in and made sure my iPhone is in the first position on all my stats.

Today I did a full restore thanks to this post Health app has crashed, data gone. and some spare time to sit down and do it.
After re-adding the apps to share their data the Health app appears to be working as it was before for me. Hope this helps.

WLS 10.3.4: How to use OS authentication for JDBC Data Source

Hello all,
As a preface, I've tried searching the forum/Google for "OS authentication" and reading the WLS JDBC doc to no avail - if it's documented somewhere, a RTFM link would be much appreciated.
I'm trying to set up a JDBC data source on WLS that leverages the OS Authentication capability of the Oracle database. If it would help, I can go into the reasoning behind why I want to do this, but basically, it's to simplify the config/deployment of a COTS application. What I have in the database is an "identified externally" user that corresponds to the OS user that is running the WebLogic Server. Normally, in tools such as SQL*Plus, I would use "/@db" as the username/password (in other words, no username and no password specified), and I would be logged in as the "idenfitied externally" user. I want to configure the same thing for a WebLogic Data Source, but if I leave the username/password blank, testing the connection in the WLS console gives me "invalid username/password, login denied" I've also tried using "/" as the username, as was documented in a quite old WLS faq, but that gives me the same result.
Is there some magic switch I need to flip?
Thanks,
John

Hi John, there's no way to do that with connection pools, which is how WLS datasources get their
connections, or middleware in general. WebLogic would have no way of knowing which if any of the
pooled connections was appropriate for the current 'user', which is not the application user, but
instead is the OS identity of the person who started the WebLogic server! If you start up your
WebLogic server, and people start pointing their browsers to it, doing various stuff, the OS knows
you started WebLogic, and maybe with the help of OCI, Oracle's JDBC might know it was you who
started WebLogic's OS process, but what does the OS know about any user that may be running
a browser or application elsewhere (even if on this same machine), when that browser or application
connects to your WebLogic server process?
HTH,
Joe

Weblogic Data source list in adf

Similar Messages

Maybe you are looking for