Weblogic server 12c: Node manager started but managed server not starting

Hi,
I have installed Oracle weblogic server 12c in my Mac OSx 10.8 PC in development mode. I added a domain and added clusters to it. added 2 managed servers inside the cluster with the same machine. I am able to start the nodemanager and it is showing the status as reachable. But when i try to start the managed server it is showing as TASK IN PROGRESS and not getting started. I checked the log and there is no exceptions in the log. Please help me out.

This forum is about iAS. For weblogic go to: WebLogic Server - General

Similar Messages

SDM and Dispatcher starts, but Server0 will not start. Errors and then stop

Hello All,
Got a problem starting the JAVA XI Server0...
Admin URL         :
Idx
Name
PID
State
Error
Restart
0
dispatcher
1564680
Running
0
yes
1
server0
0
Stopped
4
no
2
SDM
258184
Running
0
yes
Output from std_server0.out
node name   : server0
pid         : 1568780
system name : BDX
system nr. : 00
started at : Sat Aug 11 23:34:40 2007
JVMST080: verbosegc is enabled
JVMST082: -verbose:gc output will be written to stderr
SAP J2EE Engine Version 6.40   PatchLevel 102141.313 is starting...
Loading: LogManager ... 1295 ms.
Loading: PoolManager ... 3 ms.
Loading: ApplicationThreadManager ... 1424 ms.
Loading: ThreadManager ... 433 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 292 ms.
Loading: LockingManager ... 100 ms.
Loading: ConfigurationManager ... -
Output from /usr/sap/BDX/DVEBMGS00/j2ee/cluster/server0/log/defaultTrace.3.trc
#1.5#00145E4D4C7200000000001D0019701000043778663E3243#1186890157797#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.engine.core.configuration.impl0.ConfigurationManagerImpl.initInternal(ConfigurationManagerImpl.java:189)#
#1.5#00145E4D4C7200000000001E0019701000043778663E3308#1186890157798#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.engine.core.configuration.AbstractConfigurationManagerImpl.init(AbstractConfigurationManagerImpl.java:169)#
#1.5#00145E4D4C7200000000001F0019701000043778663E3467#1186890157798#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.engine.core.Framework.loadSingleManager(Framework.java:556)#
#1.5#00145E4D4C720000000000200019701000043778663E3523#1186890157798#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.engine.core.Framework.loadManagers(Framework.java:251)#
#1.5#00145E4D4C720000000000210019701000043778663E35DE#1186890157798#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.engine.core.Framework.start(Framework.java:185)#
#1.5#00145E4D4C720000000000220019701000043778663E3696#1186890157799#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)#
#1.5#00145E4D4C720000000000230019701000043778663E3752#1186890157799#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)#
#1.5#00145E4D4C720000000000240019701000043778663E3AAF#1186890157799#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)#
#1.5#00145E4D4C720000000000250019701000043778663E3B8E#1186890157800#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)#
#1.5#00145E4D4C720000000000260019701000043778663E3C4F#1186890157800#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at java.lang.reflect.Method.invoke(Method.java:391)#
#1.5#00145E4D4C720000000000270019701000043778663E3D0A#1186890157800#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.engine.boot.FrameThread.run(FrameThread.java:61)#
#1.5#00145E4D4C720000000000280019701000043778663E3DD8#1186890157800#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at java.lang.Thread.run(Thread.java:570)#
#1.5#00145E4D4C720000000000290019701000043778663E415F#1186890157801#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###Caused by: com.sap.exception.BaseRuntimeException: CPT exception "CPTFactory not initialized" occurred.#
#1.5#00145E4D4C7200000000002A0019701000043778663E423A#1186890157802#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.sql.trace.Utils.logAndThrowRuntimeException(Utils.java:305)#
#1.5#00145E4D4C7200000000002B0019701000043778663E42FB#1186890157802#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.sql.trace.cpt.SQLTraceCptRecord._getProvider(SQLTraceCptRecord.java:738)#
#1.5#00145E4D4C7200000000002C0019701000043778663E43BB#1186890157802#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   at com.sap.sql.trace.cpt.SQLTraceCptRecord.<clinit>(SQLTraceCptRecord.java:84)#
#1.5#00145E4D4C7200000000002D0019701000043778663E447C#1186890157802#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###   ... 20 more...
Any ideas?
Jim

Follow the steps in Note: 1524583

ITunes is installed but it will not start

I just updated iTunes and the progam shows as being installed but iTunes will not start.

I have had this problem - started two days ago. (Win 7 Enterprise 64-bit OS.) I have not added anything new recently that could cause a conflict (upgrades, new software, etc). Suddenly it didn't work - will not open. In Windows Task Manager I can see that it starts and then stops without opening. I've plugged in my IPhone, IPad and IPod and nothing will connect. Some forum threads suggest removing/reinstalling QuickTime and some have found that to work. Didn't for me. It will open if "Run as Administrator" is used, but that - according to threads - suggests third-party add ons as a problem. Not the case with mine. I completely removed all of the ITunes software (Bonjour, Mobile Support, etc.) and reinstalled. Nothing changed. I am so frustrated with Apple on this - I found nothing in the support discussions to help. Quite frankly, I do not understand why Apple, with tech equipment that is so well designed and elegant, still puts out such a lousy piece of software that you are held hostage to use. I have hit a wall - I hope you get a response and help! I've run out of ideas!

There is no problem in Outlook but Lync does not start. → "Microsoft Lync cannot be started"

hi,
There is no problem in Outlook but Lync does not start.
→
“Microsoft Lync cannot be started”
Addtional Info:Office2007（natural
but 32bit）is in use.
External devices except phone are not connected.
Not able to understand the issue. vene tried unistalled and re-install same issue.
Is there any add-in kind of issue?

What happens if you have no outlook.exe and any office software such as word excel or powerpoint running and then you try to launch Lync Does it still fails Can you give more detail about the error in that scenario?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer". Regards Edwin Anthony Joseph

Error: We apologize for the inconvenience but Windows did not start successfully

when i open my desktop computer,it dosent start up normal
i get this message
( we apologize for the inconvenience ,but windows did not start successfully. a recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration
to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power of failure or because the Power or Reset button was pressed, or if you aren’t sure what caused
the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally

Try starting in Safe Mode. Once it is up and running, do a normal restart and then see if it will work. Many times this is all that I have had to do to get it working again. If not, then repost with more details.
Please do not read this sentence. Please ignore the previous sentence.

I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browse

I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browsers, fire wall and virus protection off and also to download the trial of Adobe Premiere Elements 13 but result is every time same.

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

I have installed dreamweaver, but it will not start??

I have installed dreamweaver, but it does not start??

Vista & Windows 7 require you to run as Administator.
http://netsecurity.about.com/od/quicktips/qt/qt_run_as.htm
Hope this helps,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

When I switch on, the Apple and progress icons appear but it does not start.

When I switch on, the Apple and progress icons appear but it does not start. I tried resetting PRAM, Utilities, everything. It says the system is OK. I even reinstalled Tiger, but nothing has changed.

Given that you were able to reinstall the OS, you must be able to boot from the install disc.
Have you run Apple Hardware Test?
Tried running on just one RAM module, then switch it to other slot, then repeat with other module?
Safe Boot?
Checked SMART status?
Run Repair Disk:Boot from install disc (insert disc > restart > immediately hold down ckey and keep holding it until you see “Preparing Installation”) > at firstscreen select the language and click Continue > click on the Utilities Menuin the menu bar > open Disk Utility > select your HD in the panel on theleft side> click Repair Disk at bottom of main window. Run this at leasttwice, and keep running it until it says “appears ok” twice in a row. If thatdoesn’t happen, you may need a stronger utility such as DiskWarrior or if thedirectory is damaged beyond repair, you may need to reinstall the OS, or youmay have a damaged HD (repair utilities can only repair the directorystructure, not the HD itself). When this is finished, quit Disk Utility, quitthe installer, and restart. Once booted normally, go to Applications >Utilities > Disk Utility and run Repair Permissions.

Node Manager installed as service does not start managed servers. WLS 10.3

Hi All,
I have installed the node manager as a windows service. When the service starts up it does start the managed servers.
In the nodemanager.log file it shows that the node manager is reading the startup.properties file for all of the managed servers.
<Jul 24, 2009 6:38:13 AM> <INFO> <Loading domains file: C:\bea\WLSERV~1.3\common\NODEMA~1\nodemanager.domains>
<Jul 24, 2009 6:38:13 AM> <INFO> <Loaded node manager configuration properties from 'C:\bea\WLSERV~1.3\common\nodemanager\nodemanager.properties'>
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <IntegrationServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\IntegrationServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <ProdBackupServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\ProdBackupServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <QAServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\QAServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <INFO> <Plain socket listener started on port 5556, host localhost>
The node manager properties file contains the following
#Mon Apr 20 10:54:45 PDT 2009
DomainsFile=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.domains
LogLimit=0
PropertiesVersion=10.3
JavaHome=C\:\\bea\\JROCKI~1
AuthenticationEnabled=false
NodeManagerHome=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1
LogLevel=INFO
DomainsFileEnabled=true
StartScriptEnabled=false
StartScriptName=startWebLogic.cmd
ListenAddress=localhost
NativeVersionEnabled=true
ListenPort=5556
LogToStderr=true
SecureListener=false
LogCount=1
StopScriptEnabled=false
QuitEnabled=false
LogAppend=true
StateCheckInterval=500
CrashRecoveryEnabled=true
LogFile=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.log
LogFormatter=weblogic.nodemanager.server.LogFormatter
ListenBacklog=50
The managed servers' boot.properties file and startup file are below
boot.properties:
#Thu Jul 23 13:48:26 PDT 2009
CustomTrustKeyStoreFileName=C\:\\bea\\wlserver_10.3\\common\\ssl\\supportTrust2008.jks
TrustKeyStore=CustomTrust
password={3DES}mvtUK8oB8JEiQoVES4AQIQ\=\=
CustomTrustKeyStorePassPhrase={3DES}34+15HRlP6qqpZX3bTPp+Q\=\=
CustomTrustKeyStoreType=JKS
username={3DES}P5mMHiWLnf2UtssZbQtezkDtIS0COiHW
startup.properties:
#Server startup properties
#Thu Jul 23 13:48:27 PDT 2009
Arguments=-Xms1024m -Xmx1024m -Xnohup
JavaHome=C\:\\bea\\jrockit_160_05
SSLArguments=-Dweblogic.security.SSL.ignoreHostnameVerification\=false -Dweblogic.ReverseDNSAllowed\=false
RestartMax=2
RestartDelaySeconds=0
RestartInterval=3600
BeaHome=C\:\\bea
ClassPath=C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\lib\\itext\\WEB-INF\\lib\\itext.jar;C\:\\bea\\wlserver_10.3\\server\\lib\\weblogic_sp.jar;C\:\\bea\\wlserver_10.3\\server\\lib\\weblogic.jar;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\massmutual\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\assuritylife\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\minnesotalife\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\lib\\ltclibrary\\WEB-INF\\classes\\
AdminURL=http\://localhost\:7001
JavaVendor=BEA
AutoRestart=true
AutoKillIfFailed=false
I am wondering if I left out a parameter some where.
Any help would be greatly appreciated.
Thanks,
Greg

First of all, I assume you mean "... up it does NOT start ..."?
It might be helpful to point out that the purpose of the NodeManager is not to start the servers, but to "control" the servers through remote commands. When the NodeManager starts back up, it tries to reset the servers to the last known state it set them to, based on remote commands.
For instance, if your system was running and you stopped the servers through the admin console and then restarted the machine, the NodeManager would not start the servers on machine startup, because the last controlled state of the servers was down. If all of your WebLogic servers were running as a result of NodeManager commands, and you pulled the plug on the box, when you restarted the machine, the NodeManager probably would restart the servers.

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

HTTP server is started but I can not go to Ultra Search Administration Tool

Hi,
I can go to "http://localhost:7778" but not for "http://localhost:7778/ultrasearch/index.html" because of no right, error: "You don't have permission to access /ultrasearch/index.html on this server.", even though I have configured the Ultra Search server component & Middle Tier Component on web server host and HTTP server is started.
Please help me.
Many thanks,
LTH

The correct URL to admin tool should be http://<host>:<port>/ultrasearch/admin/index.jsp
You miss "admin" in your url. Try that.
Cindy

OAM Webpass installation is completed. But webserver is not started.

Hi All,
After installing the webpass on windows with the following Oracle_Access_Manager10_1_4_0_1_Win32_OHS2_WebPass.exe
I am getting the following error when I am starting the HTTP_server
C:\OraHome_1\opmn\bin>opmnctl startall
ias-component/process-type/process-set: HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3800)
failed to start a managed process after the maximum retry limit
Log:
C:\OraHome_1\opmn\logs\HTTP_Server~1
In HTTP_Server log file i got the below error message....
Syntax error on line 1135 of c:/orahome_1/apache/apache/conf/httpd.conf:
Cannot load c:/oracleaccessmanager/netpoint/webcomponent/identity/oblix/apps/webpass/bin/webpass_ohs2.dll into server: (126) The specified module could not be found:
I have verified the dll file at the same location. the file is present.
Any idea on this problem?
Thanks in advance

Hi All,
I am also facing the same problem like i have installed the Apache 2.0.52 and i installed webpass. After installinig the webpass the Apache server is not running ?
in error logs it is showing that LD_ASSUME_KERNEL is set to 2.4.19.
I tried by setting the LD_ASSUME_KERNEL then also it is not working.
Can any suggest to find the problem ?
Thanks in Advance.
Vaasu.

Oc4j is started but url is not working

Hi ALL,
I have installed oracle business intelligence successfully in centos 5.
i started the BI process and after that
i started the ./oc4j -start and i think it started successfully
i got something like this as at the end after executing ./oc4j -start
- Job execution threads will use class loader of thread: OC4J Launcher
- Quartz Scheduler v.1.5.1 created.
- RAMJobStore initialized.
- Quartz scheduler 'DefaultQuartzScheduler' initialized from default resource file in Quartz package: 'quartz.properties'
- Quartz scheduler version: 1.5.1
- Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED started.
08/03/19 18:07:01 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized.........
now when in typed
http://172.22.37.253:9704/analytics in my internet explorer i get the bellow error,will any please help me out to solve this issue, we have installed same in windows,it is working excellent but in linux i am getting below error...please some one tell me how to solve the issue
500 Internal Server Error
java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.<init>(Socket.java:366) at java.net.Socket.<init>(Socket.java:180) at com.siebel.analytics.web.sawconnect.ConnectionPoolSocketFactoryImpl.createSocket(ConnectionPoolSocketFactoryImpl.java:63) at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.siebel.analytics.web.sawconnect.ConnectionPoolSocketFactoryImpl.createSocket(ConnectionPoolSocketFactoryImpl.java:70) at com.siebel.analytics.web.sawconnect.ConnectionPool.createNewConnection(ConnectionPool.java:314) at com.siebel.analytics.web.sawconnect.ConnectionPool.getConnection(ConnectionPool.java:133) at com.siebel.analytics.web.SAWBridge.processRequest(SAWBridge.java:297) at com.siebel.analytics.web.SAWBridge.doGet(SAWBridge.java:323) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:619)
Thanks and Regards
Veeresh S

please any one suggest me anything

Tried to replace RAM but now computer not starting...PowerMac G5 dual 2.0 - are my hard drives safe? What's up?

Hello - I tried to increase the RAM in my old and trusted Power Mac G5 (dual 2.0...2005) tonight and now I'm in trouble. It has only 4 slots for RAM. It came installed with 2X256 and 2X512 ram cards. I bought 2X 1GB of Ram from Crucial.com after sending them the specs of my computer they assured me it was the right RAM. I installed the RAM just how the youtube tutorials instructed.... I replaced the 2 256 cards with the new 1GB cards and closed up the computer......note: I also "dusted" the inside of the mac very carefully and lightly with a barely damp rag.....
I plugged her in and the power button light immediately went on but the computer did not. The button wouldn't respond to being held down either. No sign of a startup or a fan noise. Nothing on the screen, no signal.... Nothing..... So I tried reversing the order of the RAM, I installed the 1GB along with the 512's. Nothing again, just the light turns on when I plug her in. Then I returned the RAM to the original configuration.....again NOTHING...just the light on.
I reset the SMU. (little button underneath the RAM area) I haven't tried to reset the PRAM yet, but I'm pretty sure that will not work either as she is not starting up at all....just the light is on... I didn't get a noticeable shock or static spark during the entire operation either. ****....whats up?
Are my Hard Drives safe in there?
Any ideas out there? Thanks in advance to your advice, T

ToddMusic wrote:
note: I also "dusted" the inside of the mac very carefully and lightly with a barely damp rag.....
Are my Hard Drives safe in there?
Any ideas out there? Thanks in advance to your advice, T
Ouch! That was not the way to get dust out. Running that damp rag anywhere near an electronic component, even if you were wearing a properly grounded writs strap, was way dangerous.
Did you lay the machine on its left side when you replaced the RAM? That is much safer (though the recommendation only shows up in the service documentation, not the user guide, for some reason).
What I would do at this point is to remove all RAM and try to power the machine. If other stuff is OK, you won't start but you will see the lunar LED flashing in a repetitive pattern above the power switch. If you don't see that happening, then things are exceptionally serious.

I installed lightroom CC 2015 but it dues not start up

After installation I restarted the system but still can't start lightroom

These instructions should help you. It fixed things for me.
Sign in, Sign out | Creative Cloud desktop app

Weblogic server 12c: Node manager started but managed server not starting

Similar Messages

Maybe you are looking for