Weblogic server 5.1 restarted automatically

Hi,
I am using weblogic 5.1 with SP 13. While accessing the pages, frequently
it is throwing
HTTP> Connection failure
java.net.SocketException: Connection reset by peer
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
     at java.lang.Exception.<init>(Exception.java, Compiled Code)
     at java.io.IOException.<init>(IOException.java, Compiled Code)
     at java.net.SocketException.<init>(SocketException.java, Compiled
Code)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
And in a very rare cases, the weblogic server system shutsdown and starts immediately.
What is the cause to make the system shutdown? Thanks in advance.

Similar Messages

WebLogic server is shut down automatically

          After i install weblogic6.1 and run default server, I got the fowllowing message
          and then server is shut down automatically, I tried it days before, and it works,
          why not work now?
          Thanks in advance!
          moonriver
          <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
          Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
          <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
          for production server.>
          <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
          Perhaps another process is using port 7002.>
          <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
          is no longer listening for connections. You should probably restart it.>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          requested by system>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          has been initiated.>
          <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
          Perhaps another process is using port 7001.>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          requested by system>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          has been initiated.>
          <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
          "myserver" for domain "mydomain" running in Production Mode>


Most likely you have another WebLogic instance already listening on 7001.
          Moonriver Sun <[email protected]> wrote:
          > After i install weblogic6.1 and run default server, I got the fowllowing message
          > and then server is shut down automatically, I tried it days before, and it works,
          > why not work now?
          > Thanks in advance!
          > moonriver
          > -----------------
          > <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
          > Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
          > <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
          > for production server.>
          > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          > server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
          > Perhaps another process is using port 7002.>
          > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
          > is no longer listening for connections. You should probably restart it.>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          > requested by system>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          > has been initiated.>
          > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          > server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
          > Perhaps another process is using port 7001.>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          > requested by system>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          > has been initiated.>
          > <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
          > "myserver" for domain "mydomain" running in Production Mode>
          Dimitri

WebLogic server is shut down automatically(in win2k pro)

After i install weblogic6.1 and run default server, I got the fowllowing message
and then server is shut down automatically, I tried it days before, and it works,
why not work now?
Thanks in advance!
moonriver
<Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
<Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
for production server.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7002.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
is no longer listening for connections. You should probably restart it.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7001.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
"myserver" for domain "mydomain" running in Production Mode>

[att1.html]

Changing Weblogic Server properties without restarting Weblogic Server

I have an application that requires a few things to be set at the start of the
Weblogic server (email addresses,criteria settings, etc.). These are contained
in a properties file that is referenced in the Weblogic properties file. The
problem is when I want to make a change in the application property file (change
an email address, increment a criteria) I have to "reboot" the Weblogic server.
These defeats the whole purpose of property files. Is there anyway to get Weblogic
to "recache" the properties files without a Weblogic server "reboot"?
Thanks,
Bryan

I very much doubt that you would be able to refresh the WebLogic properties
file at run-time (is this WebLogic 5.1 or 6.0 you are talking a about?).
If you want to be able to update properties run-time (as opposed to
boot-time) then don't use WebLogic's property file - use either your own
properties file or store the properties elsewhere such as in the database or
in JNDI. You will of course have to implement your own refresh algorithm.
If you are using EJBs then a simple READ-ONLY entity bean with a refresh
period of a few seconds may suffice.
Myles
"Bryan Freed" <[email protected]> wrote in message
news:3b1e5986$[email protected]..
>
I have an application that requires a few things to be set at the start ofthe
Weblogic server (email addresses,criteria settings, etc.). These arecontained
in a properties file that is referenced in the Weblogic properties file.The
problem is when I want to make a change in the application property file(change
an email address, increment a criteria) I have to "reboot" the Weblogicserver.
These defeats the whole purpose of property files. Is there anyway toget Weblogic
to "recache" the properties files without a Weblogic server "reboot"?
Thanks,
Bryan

J2EE Server Process is restarted automatically?

Hi,
On one of our systems we have seen that one J2EE server process was taking up nearly 100% CPU, after a few hours suddenly the process seemed to restart itself. I am guessing that maybe JControl Framework restarted it since it was chewing up so much CPU, but can't find any documentation regarding if JControl can do this and if it logs anything to say it did an automatic restart. Can anyone clear this up?
Thanks in advance,
Simon

Hi Simon
Look at sap note 742395 might help u.
regards,
kaushal

Notify when managed server restarts automatically after a crash.

I am trying to see if there is some way I can be notified (by email) when a managed server a cluster restarts automatically. I am running Weblogic 9.2 on Solaris Sparc 5.10.
I can certainly compare the PIDs of the last and the new JVM but am looking for a slick way to do it especially at the Node Manager level.
Thanks.

Hi,
*The server was started in warning mode and the JTA was declared unhealthy. I saw 2 transaction alive for more than 2000 seconds which is uncommon.
*The resource adaptor was started properly.
*We are using file store. But will it make a difference?
Thanks!

WebLogic Server shutting down Automatically

The WebLogic Server is shutting down automatically after few hrs(7-8) with the following message:
<*Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>*
*<Dec 1, 2008 11:45:08 AM EST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on 127.0.0.1:9401 was shutdown.>*
*<Dec 1, 2008 11:45:08 AM EST> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 10.167.19.113:9401 was shutdown.>*
*(preStop) Beginning PegaRULES shutdown...*
What might be wrong..Please help
We are using WebLogic9.2

There is nothing significant in the log ..no exceptions/warnings.We are starting the weblogic on UNIX remote machine and logging is done to nohup.out.Below is the startWebLogic.sh
Also,The server is not shutting when I logout from telnet session after executing the start script.
*#!/bin/sh*
*# WARNING: This file is created by the Configuration Wizard.*
*# Any changes to this script may be lost when adding extensions to this configuration.*
*# --- Start Functions ---*
stopAll()
*     # We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services*
*     if [ "X${ALREADY_STOPPED}" != "X" ] ; then*
*          exit*
*     fi*
*     # STOP POINTBASE (only if we started it)*
*     if [ "${POINTBASE_FLAG}" = "true" ] ; then*
*          echo "Stopping PointBase server..."*
*          ${WL_HOME}/common/bin/stopPointBase.sh -port=${POINTBASE_PORT} -name=${POINTBASE_DBNAME} >"${DOMAIN_HOME}/pointbaseShutdown.log" 2>&1*
*          echo "PointBase server stopped."*
*     fi*
*     ALREADY_STOPPED="true"*
*     # Restore IP configuration the node manager starts IP Migration*
*     if [ "${SERVER_IP}" != "" ] ; then*
*          ${WL_HOME}/common/bin/wlsifconfig.sh -removeif "${IFNAME}" "${SERVER_IP}"*
*     fi*
*# --- End Functions ---*
*# This script is used to start WebLogic Server for this domain.*
*# To create your own start script for your domain, you can initialize the*
*# environment by calling @USERDOMAINHOME/setDomainEnv.*
*# setDomainEnv initializes or calls commEnv to initialize the following variables:*
*# BEA_HOME - The BEA home directory of your WebLogic installation.*
*# JAVA_HOME - Location of the version of Java used to start WebLogic*
*# Server.*
*# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)*
*# PATH - JDK and WebLogic directories are added to system path.*
*# WEBLOGIC_CLASSPATH*
*# - Classpath needed to start WebLogic Server.*
*# PATCH_CLASSPATH - Classpath used for patches*
*# PATCH_LIBPATH - Library path used for patches*
*# PATCH_PATH - Path used for patches*
*# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch*
*# JAVA_VM - The java arg specifying the VM to run. (i.e.*
*# - server, -hotspot, etc.)*
*# USER_MEM_ARGS - The variable to override the standard memory arguments*
*# passed to java.*
*# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.*
*# POINTBASE_HOME - Point Base home directory.*
*# POINTBASE_CLASSPATH*
*# - Classpath needed to start PointBase.*
*# Other variables used in this script include:*
*# SERVER_NAME - Name of the weblogic server.*
*# JAVA_OPTIONS - Java command-line options for running the server. (These*
*# will be tagged on to the end of the JAVA_VM and*
*# MEM_ARGS)*
*# For additional information, refer to the WebLogic Server Administration*
*# Console Online Help(http://e-docs.bea.com/wls/docs92/ConsoleHelp/startstop.html).*
*# Call setDomainEnv here.*
*DOMAIN_HOME="/apps/bea/user_projects/domains/SAM1"*
*. ${DOMAIN_HOME}/bin/setDomainEnv.sh $**
*SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"*
*SAVE_CLASSPATH="${CLASSPATH}"*
*# Start PointBase*
*PB_DEBUG_LEVEL="0"*
*if [ "${POINTBASE_FLAG}" = "true" ] ; then*
*     ${WL_HOME}/common/bin/startPointBase.sh -port=${POINTBASE_PORT} -debug=${PB_DEBUG_LEVEL} -console=false -background=true -ini=${DOMAIN_HOME}/pointbase.ini >"${DOMAIN_HOME}/pointbase.log" 2>&1*
fi
*JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"*
*SAVE_JAVA_OPTIONS=""*
*CLASSPATH="${SAVE_CLASSPATH}"*
*SAVE_CLASSPATH=""*
*trap 'stopAll' 1 2 3 15*
*if [ "${PRODUCTION_MODE}" = "true" ] ; then*
*     WLS_DISPLAY_MODE="Production"*
else
*     WLS_DISPLAY_MODE="Development"*
fi
*if [ "${WLS_USER}" != "" ] ; then*
*     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"*
*fi*
*if [ "${WLS_PW}" != "" ] ; then*
*     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"*
fi
*CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"*
*echo "."*
*echo "."*
*echo "JAVA Memory arguments: ${MEM_ARGS}"*
*echo "."*
*echo "WLS Start Mode=${WLS_DISPLAY_MODE}"*
*echo "."*
*echo "CLASSPATH=${CLASSPATH}"*
*echo "."*
*echo "PATH=${PATH}"*
*echo "."*
*echo "***************************************************"*
*echo "* To start WebLogic Server, use a username and *"*
*echo "* password assigned to an admin-level user. For *"*
*echo "* server administration, use the WebLogic Server *"*
*echo "* console at http://hostname:port/console *"*
*echo "***************************************************"*
*# Set up IP Migration related variables.*
*# Set interface name.*
*if [ "${Interface}" != "" ] ; then*
*     IFNAME="${Interface}"*
else
*     IFNAME=""*
fi
*# Set IP Mask.*
*if [ "${NetMask}" != "" ] ; then*
*     IPMASK="${NetMask}"*
*else*
*     IPMASK=""*
*fi*
*# Perform IP Migration if SERVER_IP is set by node manager.*
*if [ "${SERVER_IP}" != "" ] ; then*
*     ${WL_HOME}/common/bin/wlsifconfig.sh -addif "${IFNAME}" "${SERVER_IP}" "${IPMASK}"*
fi
*# START WEBLOGIC*
echo "starting weblogic with Java version:"
*${JAVA_HOME}/bin/java ${JAVA_VM} -version*
*if [ "${WLS_REDIRECT_LOG}" = "" ] ; then*
*     echo "Starting WLS with line:"*
*     echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}"*
*     nohup ${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} &*
*else*
*     echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"*
*     nohup ${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1 &*
*fi*
*#stopAll*
*#popd*
*# Exit this script only if we have been told to exit.*
*if [ "${doExitFlag}" = "true" ] ; then*
*     exit*
fi

Fail to configure Apache web server 2.0.53 as plugin to weblogic server 8.1

Hello,
I have installed web logic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
with these settings -
server name "myServer"
port No - 7001
Domain - mydomain
I have installed apache web server 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with web logic server.
After making the installation and configuration when I try to test the server plug-in installation I am getting this error
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds.
Please let me know what exactly is going wrong and throw some light how can I proceed.
Thanks,
Nanda kishore

I recd a similar message.
This message indicates that the configuration setting for the Apache plugin are proper.
You probably need to check if our Weblogic server has been restarted properly.
thanks

Fail to configure Apache webserver 2.0.53 as plugin to weblogic server 8.1

Hello,
I have installed weblogic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
with these settings -
server name "myServer"
port No - 7001
I have installed apache webserver 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with weblogic server.
After making the installation and configuration when i try to test the server plugin installation i am getting this error
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds.
Please let me know what exactly is going wrong and throw some light how can i proceed.
Thanks,
Nanda kishore

I recd a similar message.
This message indicates that the configuration setting for the Apache plugin are proper.
You probably need to check if our Weblogic server has been restarted properly.
thanks

Secure server instance restarts automatically

Hi All,
I am using iPlanet Web Server 6.0 SP1 with weblogic app server ( no LDAP ) to host a website on Windows 2000 machine. I have two virtual server instances of iPlanet. The one that is configured for SSL, gets restarted automatically. I get following error in event log of system or error log of that instance.
ncorrect Parameter security ( 3780): for host 202.68.143.70 trying to HEAD /index.html, acl-state reports: access of D:/iPlanet/Servers/docs/web/index.html denied by ACL path=d:/iplanet/servers/docs/web/ directive 1
The ACL entries are OK.
Could anybody please help me out?

The error message states that the server denied access to a client who was trying to access D:/iPlanet/Servers/docs/web/index.html. It denied access as it was instructed to by the first access control directive configured on the path d:/iplanet/servers/docs/web/. If you don't want to deny access to D:/iPlanet/Servers/docs/web/index.html, you should review your ACL file configuration.
The Service Pack Release Notes document the issues addressed by that Service Pack. You can view the Release Notes on docs.sun.com at http://docs.sun.com/db/prod/s1websrv#hic

Running a class automatically when weblogic server is started

Hi,
My requirement is as follows:
I need to constantly (once in every 15 mins) poll a database and check
for a particular field in a table. I am using weblogic 5.1.0 as
application server.
Now, I developed ServerTimer class, which implements Schedulable,
Triggerable classes of weblogic. When I run ServerTimer class
(explicitly from the command line) I could poll the database.
Now my requirement is to make ServerTimer to run automatically when I
start/restart the weblogic server.
How do I do this?
Thanks,
Naga

Assuming you are using WL5.1, then in your WL properties file:
weblogic.system.startupClass.ServerTimer=com.xxx.xxx.ServerTimer
"Nagananda" <[email protected]> wrote in message
news:[email protected]..
Hi,
My requirement is as follows:
I need to constantly (once in every 15 mins) poll a database and check
for a particular field in a table. I am using weblogic 5.1.0 as
application server.
Now, I developed ServerTimer class, which implements Schedulable,
Triggerable classes of weblogic. When I run ServerTimer class
(explicitly from the command line) I could poll the database.
Now my requirement is to make ServerTimer to run automatically when I
start/restart the weblogic server.
How do I do this?
Thanks,
Naga

Shouldn't there be an option called restart weblogic server in jdeevloper?

Hi,
Should there be an option called restart weblogic server which automatically stops and again start instead of the people doing it manually to make it easier for people ? Since most the time WLS runs out memory. Just a thought :)
-Sam

If you really want such an option - just create a simple bat file that executes the stopWebLogic and then the startWeblogic scripts from the defaultDomain directory - then you can add this as a toolbar or menu option using the tools->external tools option.

PI 7.0 Production server restarts automatically

Hi guys,
We have installed and configured correctly a PI 7.0 system on Windows 2003 Standard Edition X64-bit with SQL Server 2005. We are on SP12. Everything, SLD, RFC connections work properly.
The problem is that 4-5 days after the installation the Windows Server restarts automatically in unexpected time during the day (unexpected shutdown), even when anybody doesn't do anything in the system. In the Event Viewer we get the following message/error "System Error: Category 102 EventID 1003". There are no other messages/errors.
This is a production system and we are supposed to go live within the next days! So I need your help ASAP.
Any ideas?
Thank you.
Best Regards.
Evaggelos

1) update your network card drivers to the latest and for all devices including your motherboard chipset drivers.
2) Are you using ethernet instead of USB?
3) This URL might help you
http://www.pcreview.co.uk/forums/thread-1885463.php
Regards
Sangeetha

Configuring weblogic server to start automatically

Hi, I have installed oracle weblogic server 11g, jdk/jre 7 and forms & reports 11g. i have successfully installed all softwares. I configured forms and reports domain and weblogic domain. I would like to have weblogic start automatically when i login in to comp/server. Right now i have to click on the start admin server for weblogic server domain button in domain folder and the stop admin server button. I also have to type in the username and password into the cmd promt when i click the start and stop admin server buttons.
How can i have the forms and reporst weblogic server start automatically?
how can i get past not having to enter in username and password each time it starts up and stops? (this is entering the username and password before you get to the weblogic console login screen)

i configured it as a windows service. i followed the instructions from the link you provided and when i finished i named the file "startweblogic.cmd." I put the file in the "WL_HOME\server\bin" directory which also has the installsvc.cmd file in and ran it as administrator.
tHIS IS A COPY OF WHAT WAS DISPLAYED:
C:\Windows\system32>echo off
C:\Windows\system32>set CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\pr
ofiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~
1.0\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Or
acle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\feat
ures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Orac
le\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
* To start WebLogic Server, use the password *
* assigned to the system user. The system *
* username and password must also be used to *
* access the WebLogic Server console from a web *
* browser. *
C:\Windows\system32>rem *** Set Command Line for service to execute within creat
ed JVM
C:\Windows\system32>set CMDLINE="-client -Xms32m -Xmx200m -XX:MaxPermSize=128m -
XX:+UseSpinning -Dweblogic.management.server=http://hidden:hidden -Dweblo
gic.Stdout="D:\TEMP\Svr_Logs\stdout.log" -Dweblogic.Stderr="D:\TEMP\Svr_Logs\std
err.log" -Xverify:none -classpath \"C:\Oracle\MIDDLE~1\patch_wls1036\profiles\de
fault\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\
profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK1
7~1.0\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\fe
atures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server
\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Or
acle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;\" -Dweblogic.Name=hidden -Dweblogic.management.username=hidden -Dweblogic.management.server
=\"http://hidden:hidden\" -Dweblogic.ProductionModeEnabled= -Djava.securi
ty.policy=\"C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy\" weblogic.
Server"
C:\Windows\system32>goto finish
C:\Windows\system32>rem *** Set up extrapath for win32 and win64 platform separa
tely
C:\Windows\system32>if "false" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV
~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\J
ava\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1
.3\server\native\win\32\oci920_8
C:\Windows\system32>if "false" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV
~1.3\server\native\win\64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\
Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\64\oci920_8
C:\Windows\system32>if "true" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\x64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\
Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\x64\oci920_8
C:\Windows\system32>rem *** Install the service
C:\Windows\system32>"C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin\beasvc" -install -
svcname:"beasvc Hidden_hidden" -javahome:"C:\PROGRA~1\Java\JDK17~1.
0" -execdir:"C:\Oracle\Middleware\user_projects\domains\hidden\config"
-maxconnectretries:"3" -host:"hidden" -port:"hidden" -extrapath:"C:\Oracle\M
IDDLE~1\WLSERV~1.3\server\native\win\x64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\b
in;C:\PROGRA~1\Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\M
IDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8" -password:"hidden" -cmdl
ine:"-client -Xms32m -Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Dweblogic.m
anagement.server=http://HIDDEN:HIDDEN -Dweblogic.Stdout="D:\TEMP\Svr_Logs
\stdout.log" -Dweblogic.Stderr="D:\TEMP\Svr_Logs\stderr.log" -Xverify:none -clas
spath \"C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath
\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifes
t_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0\lib\tools.jar;C:\Oracl
e\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\s
erver\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modul
es_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Orac
le\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA
~1.0_1/lib/ant-contrib.jar;\" -Dweblogic.Name=HIDDEN -Dweblogic.managem
ent.username=HIDDEN-Dweblogic.management.server=\"http://HIDDEN:HIDDEN\" -Dweblogic.ProductionModeEnabled= -Djava.security.policy=\"C:\Oracle\MIDDLE
~1\WLSERV~1.3\server\lib\weblogic.policy\" weblogic.Server"
CreateService failed - The specified service already exists. (0x431)
C:\Windows\system32>ENDLOCAL
C:\Windows\system32>pause
Press any key to continue . . .
Edited by: 975620 on Apr 3, 2013 11:31 AM
Edited by: 975620 on Apr 3, 2013 11:32 AM

Reload a jar in weblogic server without restart

Hi All,
We are using weblogic version '10.0.1.0' and have 'reports.jar' file in server for reports.
If we change any existing class file under 'reports.jar' then we are using below steps in order to recognize a modified jar by weblogic
1) We need to recreate a jar using eclipse in local IDE and
2) Copy the 'reports.jar' into server
3) Need to restart server inorder to recognize the modified jar
Is there any alternative solution to reload a jar in weblogic server without restart?
Please do the needful.
Thanks & Regards,
Gangadhar

Hi,
If this is for weblogic running on development mode, then you can go for auto-deployment feature where weblogic will auto-deploy modified application from autodeploy directory.
For production mode, you can go for production-redeployment feature of weblogic where it uses application versioning. So for example you deployed webapp1 with version app1.0 and then for new release you will deploy webapp1 with version app2.0 adding a retirement policy to retire old application after said time and start using webapp1 with app2.0.
Refer to link for mode detail - http://middlewaresupport.wordpress.com/2013/03/21/production-redeployment-feature-in-weblogic/
rank it if found useful
Thanks,
Ranjan

Weblogic server 5.1 restarted automatically

Similar Messages

Maybe you are looking for