Fail to configure Apache webserver 2.0.53 as plugin to weblogic server 8.1

Hello,
I have installed weblogic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
with these settings -
server name "myServer"
port No - 7001
I have installed apache webserver 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with weblogic server.
After making the installation and configuration when i try to test the server plugin installation i am getting this error
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds.
Please let me know what exactly is going wrong and throw some light how can i proceed.
Thanks,
Nanda kishore

I recd a similar message.
This message indicates that the configuration setting for the Apache plugin are proper.
You probably need to check if our Weblogic server has been restarted properly.
thanks

Similar Messages

  • Fail to configure Apache web server 2.0.53 as plugin to weblogic server 8.1

    Hello,
    I have installed web logic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
    with these settings -
    server name "myServer"
    port No - 7001
    Domain - mydomain
    I have installed apache web server 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with web logic server.
    After making the installation and configuration when I try to test the server plug-in installation I am getting this error
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds.
    Please let me know what exactly is going wrong and throw some light how can I proceed.
    Thanks,
    Nanda kishore

    I recd a similar message.
    This message indicates that the configuration setting for the Apache plugin are proper.
    You probably need to check if our Weblogic server has been restarted properly.
    thanks

  • Fail to configure Apache web server 2.0.53 as plugin to weblogicserver 8.1

    Hello,
    I have installed web logic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
    with these settings -
    server name "myServer"
    port No - 7001
    Domain - mydomain
    I have installed apache web server 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with web logic server.
    After making the installation and configuration when I try to test the server plug-in installation I am getting this error
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds.
    Please let me know what exactly is going wrong and throw some light how can I proceed.
    Thanks,
    Nanda kishore

    I recd a similar message.
    This message indicates that the configuration setting for the Apache plugin are proper.
    You probably need to check if our Weblogic server has been restarted properly.
    thanks

  • Installing and Configuring Microsoft IIS plugin for weblogic server

    Hi guys,
    I want to navigate from "a page in website hosted on IIS" to "a page in application hosted on weblogic". I found out that there is a plugin for Microsoft IIS that can proxy requests to weblogic server. The documentation of the plugin can be found on the following address:
    Webserver plugin
    I want to know about the configuration of machines. Can IIS and weblogic be on the same machine or different machines????  Where i have to install the plugin????
    I am not able to find this in the above documentation.
    My environment is:
    1) Weblogic Server 10.3.5 installed on windows server 2012.
    2) Forms and Reports 11gR2 are installed on this weblogic server
    3) Apex Listener is also installed on the weblogic which communicates with a different db server.
    4) I also want to install JDeveloper and ADF on the same weblogic server and call applications developed in ADF (like jsp page) from Microsoft IIS website.
    Please help me and give me suggestions.
    Regards,
    Waqas

    There is a free ebook here:
    http://www.microsoft.com/en-us/download/details.aspx?id=30384
    It's also the title of a section of technet but that's not available in printed format as far as i know.
    http://technet.microsoft.com/en-us/library/cc262957.aspx

  • Configure Log File for each web application deployed in weblogic server usi

    Hi All,
    How do I configure Log4J to log separately for each web application? i.e. Assuming, I have a web application "AWeb" and a web application "BWeb". I need a log file to be created for AWeb Separately and BWeb Separately. i.e. All the log information for "AWeb" web application will be stored in AWeb.log and all the "BWeb" web application will be stored in BWeb.log
    Do you have any sample code and configuration details for the above-mentioned requirement?
    Thanks in Advance,
    C R Baradwaj

    You do not need to do anything strange, just use log4j the usual way with the exception that you do not need to init log4j (this is not necesary when using a log4j.xml.)
    A minimal sample of a log4j.xml is
    <?xml version="1.0" encoding="UTF-8" ?>
    <!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
    <log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
    <appender name="ConsoleAppender" class="org.apache.log4j.ConsoleAppender">
    <layout class="org.apache.log4j.SimpleLayout"/>
    </appender>
    <root>
    <priority value ="debug" />
    <appender-ref ref="ConsoleAppender"/>
    </root>
    </log4j:configuration>
    You just have to be sure that you have different log4j.xml in your classpath for different web applications.
    Regards,
    LG

  • Use apache webserver instead of oracle http server in EPM 11.1.20?

    Is it possible to configure enterprise performance management 11.1.20 with apache webserver instead of using the default oracle http server and if so, can someone point me to the instructions for how to set this up?

    Wow. You really need to keep going back to check the certification matrix, huh. The version I have shows that Apache is supported. Apparently that was deleted on 7/28.
    I don't think it should matter much, though, since Oracle HTTP server is Apache under the covers.I ran into this when I had to use the IBM HTTP web server, which is also Apache under the covers. when you look at httpd.conf, it looks just like Apache. So, I would guess that whatever configuration you did with the Apache web server you will also be able to do with the Oracle web server.
    Jerry

  • Deployment Application To Weblogic Server Failed

    Hello every body
    I need your help in this problem please :
    I'm using Oracle JDeveloper 11.1 in my local machine, I Installed Weblogic Server 10.3 on the server and it's works well, I made new JDBC connection in Weblogic Server and it's works well too.
    I made new ADF Fusion web Application and I used the same connection that I used in Weblogic server and it's works well.
    I made new Application Server Connection from my local machine and It's works well with my user account.
    In my project I made new WAR deployment, Also I configured my Application properties to Bind Application to the Weblogic server Instance.
    1-when I try to deploy my project to Weblogic server I get this error message :
    Deploying Application...
    [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application test_webapp on AdminServer.: Failed to load webapp: 'test_webapp.war'.
    weblogic.application.ModuleException: Failed to load webapp: 'test_webapp.war'
    #### Deployment incomplete. #### Feb 15, 2009 12:18:01 PM
    Deployment Failed
    2-Another application was deployed before to Weblogic server, it seems running well, whereas Weblogic Server marks my deployment health as OK, but when I try to run it for test using this URL : http://serverIP:Port/Deployment Name, I get this Error : Error 403--Forbidden
    What Should I do for both cases ?
    Thanks a lot ...

    Thanks Timo
    But first I don't use any library at my project , this is last log in Weblogic Server logfile :
    ####<Feb 16, 2009 1:56:58 PM EET> <Warning> <DeploymentService> <D2KR2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <Osama> <> <> <1234785418343> <BEA-290008> <Deployment service servlet encountered while extracting uploaded file to directory ".\servers\AdminServer\upload\test_webapp". Exception is: "invalid distance code".>
    Where D2KR2 is my Server Name
    Osama is my user in Weblogic Server
    test_webapp is the Application name
    My problem didn't solved yet, and I'm new at JDeveloper ADF.
    Where I can find clear information about deploying projects to Weblogic server.
    Thank's Agin ...
    Edited by: user8330337 on 15/02/2009 04:09 ص

  • Connection Reset on Oracle SOA-Suite 10.1.3.5.0 Apache-Webserver with SSLv3

    Hi,
    I'm trying to use SSL with my SOA-Suite 10.1.3.5.0 Webserver. This Problem occurs on both a windows and a linux machine. I'm referring to the windows-machine, as this has the latest patch-level. My problems are about the Apache-Webserver only. I didn't do any special configuration, and SSL is working fine in the Browser (FF3.5 and IE 8). But for Paypal IPN Notification i'm having serious troubles. I was able to track down the problem to a SSLv3 problem. I installed the latest openssl version and issued the following command:
    openssl s_client -connect localhost:443
    This gives me the following output:
    C:\OpenSSL\bin>openssl s_client -connect localhost:443
    Loading 'screen' into random state - done
    CONNECTED(000002E8)
    depth=0 /C=US/ST=OR/L=PORTLAND/O=ORACLE/OU=PDC/CN=WARNING: FOR TEST PURPOSES ONLY! DO NOT USE COMMERCIALLY!
    verify error:num=18:self signed certificate
    verify return:1
    depth=0 /C=US/ST=OR/L=PORTLAND/O=ORACLE/OU=PDC/CN=WARNING: FOR TEST PURPOSES ONLY! DO NOT USE COMMERCIALLY!
    verify error:num=10:certificate has expired
    notAfter=Dec 8 16:18:11 2006 GMT
    verify return:1
    depth=0 /C=US/ST=OR/L=PORTLAND/O=ORACLE/OU=PDC/CN=WARNING: FOR TEST PURPOSES ONLY! DO NOT USE COMMERCIALLY!
    notAfter=Dec 8 16:18:11 2006 GMT
    verify return:1
    Certificate chain
    0 s:/C=US/ST=OR/L=PORTLAND/O=ORACLE/OU=PDC/CN=WARNING: FOR TEST PURPOSES ONLY! DO NOT USE COMMERCIALLY!
    i:/C=US/ST=OR/L=PORTLAND/O=ORACLE/OU=PDC/CN=WARNING: FOR TEST PURPOSES ONLY! DO NOT USE COMMERCIALLY!
    Server certificate
    -----BEGIN CERTIFICATE-----
    Here is the certificate...
    -----END CERTIFICATE-----
    subject=/C=US/ST=OR/L=PORTLAND/O=ORACLE/OU=PDC/CN=WARNING: FOR TEST PURPOSES ONLY! DO NOT USE COMMERCIALLY!
    issuer=/C=US/ST=OR/L=PORTLAND/O=ORACLE/OU=PDC/CN=WARNING: FOR TEST PURPOSES ONLY! DO NOT USE COMMERCIALLY!
    No client certificate CA names sent
    SSL handshake has read 807 bytes and written 325 bytes
    New, TLSv1/SSLv3, Cipher is AES256-SHA
    Server public key is 1024 bit
    Secure Renegotiation IS NOT supported
    Compression: NONE
    Expansion: NONE
    SSL-Session:
    Protocol : TLSv1
    Cipher : AES256-SHA
    Session-ID: A66F9DD036604C6B2DDF05591FC3614D
    Session-ID-ctx:
    Master-Key: DC0E5BB6EEFE0E6B60AA4A2A65974B793500803930A8EFABB141F9DED25819A98FA00C365B9D61D579745C69CAA60C56
    Key-Arg : None
    Start Time: 1272964747
    Timeout : 300 (sec)
    Verify return code: 10 (certificate has expired)
    ---This looks fine so far. But when I'm issuing an HTTP-Command, e.g. GET / HTTP/1.0, the connection gets closed immediately (openssl just says 'closed' and I'm back to the commandline again). When adding the -msg to the openssl commandline, I'm getting the following output:
    GET / HTTP/1.0
    TLS 1.0 Alert [length 0002], warning close_notify
    01 00
    closed
    TLS 1.0 Alert [length 0002], warning close_notify
    01 00The ssl_engine_log contains the following (set to LogLevel debug):
    [04/Mai/2010 11:23:19 00976] [info] Connection to child 2 established (server soa1.karlsbad2.promatis.de:443, client 127.0.0.1)
    [04/Mai/2010 11:23:20 00976] [trace] inside shmcb_store_session
    [04/Mai/2010 11:23:20 00976] [trace] session_id[0]=89, masked index=25
    [04/Mai/2010 11:23:20 00976] [trace] entering shmcb_insert_encoded_session, *queue->pos_count = 0
    [04/Mai/2010 11:23:20 00976] [trace] entering shmcb_expire_division
    [04/Mai/2010 11:23:20 00976] [trace] we have 14385 bytes and 133 indexes free - enough
    [04/Mai/2010 11:23:20 00976] [trace] storing in index 0, at offset 0
    [04/Mai/2010 11:23:20 00976] [trace] session_id[0]=89, idx->s_id2=51
    [04/Mai/2010 11:23:20 00976] [trace] leaving now with 124 bytes in the cache and 1 indexes
    [04/Mai/2010 11:23:20 00976] [trace] leaving shmcb_insert_encoded_session
    [04/Mai/2010 11:23:20 00976] [trace] leaving shmcb_store successfully
    [04/Mai/2010 11:23:20 00976] [trace] shmcb_store successful
    [04/Mai/2010 11:23:20 00976] [trace] Inter-Process Session Cache: request=SET status=OK id=593330BC94651266418548085D63F57C timeout=300s (session caching)
    [04/Mai/2010 11:23:25 00976] [info] Connection to child 2 closed with standard shutdown (server soa1.karlsbad2.promatis.de:443, client 127.0.0.1)This seems fine for me.
    When adding the -bugs to the openssl commandline (saying "Switch on all SSL implementation bug workarounds") everything is working fine (with the same output for openssl, using sslv3 and the following additional line in the ssl-log: [info] Initial (No.1) HTTPS request received for child 34 (server soa1.karlsbad2.promatis.de:443) (at the end just before connection close).
    When setting the client to use ssl2 (-ssl2) everything is fine too. When doing -ssl3 it is the same as without any parameter.
    The certificate has expired message and the test-certificate seem not to be related with my problems, since the same problems arise on our production server having a "real and valid" SSL certificate certified by a renowned SSL-CA.
    When setting SSLProtocol +SSLv2 in the ssl.conf openssl is working fine too. But this is not an option as sslv2 is no longer supported by Firefox (giving me an error-message when accessing the page).
    I played around with SSLCipherSuite in the ssl.conf without success. I fear mod_ossl has a bug when working with the specified ssl-parameters. Is there any way out of this?
    Any help would be highyl appreciated,
    Best regards
    Johannes Michler
    PS: This is the ssl_engline_log during startup:
    [04/Mai/2010 11:22:32 00880] [info] Server: Oracle-HTTP-Server/1.3.34, Interface: mod_ossl/10.1.3.0.0, Library:
    [04/Mai/2010 11:22:32 00880] [info] Init: 1st startup round (still not detached)
    [04/Mai/2010 11:22:32 00880] [trace] Shared-memory segment has 512000 available
    [04/Mai/2010 11:22:32 00880] [trace] shmcb_malloc attempt for 512000 bytes failed
    [04/Mai/2010 11:22:32 00880] [trace] shmcb_malloc attempt for 511998 bytes failed
    [04/Mai/2010 11:22:32 00880] [trace] shmcb_malloc attempt for 511996 bytes failed
    [04/Mai/2010 11:22:32 00880] [trace] shmcb_malloc attempt for 511994 bytes failed
    [04/Mai/2010 11:22:32 00880] [trace] shmcb_init allocated 511992 bytes of shared memory
    [04/Mai/2010 11:22:32 00880] [trace] entered shmcb_init_memory()
    [04/Mai/2010 11:22:32 00880] [trace] for 511992 bytes, recommending 4266 indexes
    [04/Mai/2010 11:22:32 00880] [trace] shmcb_init_memory choices follow
    [04/Mai/2010 11:22:32 00880] [trace] division_mask = 0x1F
    [04/Mai/2010 11:22:32 00880] [trace] division_offset = 64
    [04/Mai/2010 11:22:32 00880] [trace] division_size = 15997
    [04/Mai/2010 11:22:32 00880] [trace] queue_size = 1604
    [04/Mai/2010 11:22:32 00880] [trace] index_num = 133
    [04/Mai/2010 11:22:32 00880] [trace] index_offset = 8
    [04/Mai/2010 11:22:32 00880] [trace] index_size = 12
    [04/Mai/2010 11:22:32 00880] [trace] cache_data_offset = 8
    [04/Mai/2010 11:22:32 00880] [trace] cache_data_size = 14385
    [04/Mai/2010 11:22:32 00880] [trace] leaving shmcb_init_memory()
    [04/Mai/2010 11:22:32 00880] [info] Shared memory session cache initialised
    [04/Mai/2010 11:22:32 00880] [info] Init: Initializing (virtual) servers for SSL
    [04/Mai/2010 11:22:32 00880] [info] Init: Configuring server soa1.karlsbad2.promatis.de:443 for SSL protocol
    [04/Mai/2010 11:22:32 00880] [trace] Init: (soa1.karlsbad2.promatis.de:443) Configuring permitted SSL ciphers [ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP]
    [04/Mai/2010 11:22:32 00880] [trace] Init: (soa1.karlsbad2.promatis.de:80) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:32 00880] [trace] Init: (soa1.karlsbad2.promatis.de:443) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:32 00880] [trace] Init: (127.0.0.1:7200) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:33 00880] [info] Init: 2nd startup round (already detached)
    [04/Mai/2010 11:22:33 00880] [trace] Shared-memory segment has 512000 available
    [04/Mai/2010 11:22:33 00880] [trace] shmcb_malloc attempt for 512000 bytes failed
    [04/Mai/2010 11:22:33 00880] [trace] shmcb_malloc attempt for 511998 bytes failed
    [04/Mai/2010 11:22:33 00880] [trace] shmcb_malloc attempt for 511996 bytes failed
    [04/Mai/2010 11:22:33 00880] [trace] shmcb_malloc attempt for 511994 bytes failed
    [04/Mai/2010 11:22:33 00880] [trace] shmcb_init allocated 511992 bytes of shared memory
    [04/Mai/2010 11:22:33 00880] [trace] entered shmcb_init_memory()
    [04/Mai/2010 11:22:33 00880] [trace] for 511992 bytes, recommending 4266 indexes
    [04/Mai/2010 11:22:33 00880] [trace] shmcb_init_memory choices follow
    [04/Mai/2010 11:22:33 00880] [trace] division_mask = 0x1F
    [04/Mai/2010 11:22:33 00880] [trace] division_offset = 64
    [04/Mai/2010 11:22:33 00880] [trace] division_size = 15997
    [04/Mai/2010 11:22:33 00880] [trace] queue_size = 1604
    [04/Mai/2010 11:22:33 00880] [trace] index_num = 133
    [04/Mai/2010 11:22:33 00880] [trace] index_offset = 8
    [04/Mai/2010 11:22:33 00880] [trace] index_size = 12
    [04/Mai/2010 11:22:33 00880] [trace] cache_data_offset = 8
    [04/Mai/2010 11:22:33 00880] [trace] cache_data_size = 14385
    [04/Mai/2010 11:22:33 00880] [trace] leaving shmcb_init_memory()
    [04/Mai/2010 11:22:33 00880] [info] Shared memory session cache initialised
    [04/Mai/2010 11:22:33 00880] [info] Init: Initializing (virtual) servers for SSL
    [04/Mai/2010 11:22:33 00880] [info] Init: Configuring server soa1.karlsbad2.promatis.de:443 for SSL protocol
    [04/Mai/2010 11:22:33 00880] [trace] Init: (soa1.karlsbad2.promatis.de:443) Configuring permitted SSL ciphers [ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP]
    [04/Mai/2010 11:22:33 00880] [trace] Init: (soa1.karlsbad2.promatis.de:80) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:33 00880] [trace] Init: (soa1.karlsbad2.promatis.de:443) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:33 00880] [trace] Init: (127.0.0.1:7200) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:33 00976] [info] Server: Oracle-HTTP-Server/1.3.34, Interface: mod_ossl/10.1.3.0.0, Library:
    [04/Mai/2010 11:22:33 00976] [info] Init: 1st startup round (still not detached)
    [04/Mai/2010 11:22:33 00976] [trace] Shared-memory segment has 512000 available
    [04/Mai/2010 11:22:33 00976] [trace] shmcb_malloc attempt for 512000 bytes failed
    [04/Mai/2010 11:22:33 00976] [trace] shmcb_malloc attempt for 511998 bytes failed
    [04/Mai/2010 11:22:33 00976] [trace] shmcb_malloc attempt for 511996 bytes failed
    [04/Mai/2010 11:22:33 00976] [trace] shmcb_malloc attempt for 511994 bytes failed
    [04/Mai/2010 11:22:33 00976] [trace] shmcb_init allocated 511992 bytes of shared memory
    [04/Mai/2010 11:22:33 00976] [trace] entered shmcb_init_memory()
    [04/Mai/2010 11:22:33 00976] [trace] for 511992 bytes, recommending 4266 indexes
    [04/Mai/2010 11:22:33 00976] [trace] shmcb_init_memory choices follow
    [04/Mai/2010 11:22:33 00976] [trace] division_mask = 0x1F
    [04/Mai/2010 11:22:33 00976] [trace] division_offset = 64
    [04/Mai/2010 11:22:33 00976] [trace] division_size = 15997
    [04/Mai/2010 11:22:33 00976] [trace] queue_size = 1604
    [04/Mai/2010 11:22:33 00976] [trace] index_num = 133
    [04/Mai/2010 11:22:33 00976] [trace] index_offset = 8
    [04/Mai/2010 11:22:33 00976] [trace] index_size = 12
    [04/Mai/2010 11:22:33 00976] [trace] cache_data_offset = 8
    [04/Mai/2010 11:22:33 00976] [trace] cache_data_size = 14385
    [04/Mai/2010 11:22:33 00976] [trace] leaving shmcb_init_memory()
    [04/Mai/2010 11:22:33 00976] [info] Shared memory session cache initialised
    [04/Mai/2010 11:22:33 00976] [info] Init: Initializing (virtual) servers for SSL
    [04/Mai/2010 11:22:33 00976] [info] Init: Configuring server soa1.karlsbad2.promatis.de:443 for SSL protocol
    [04/Mai/2010 11:22:33 00976] [trace] Init: (soa1.karlsbad2.promatis.de:443) Configuring permitted SSL ciphers [ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP]
    [04/Mai/2010 11:22:33 00976] [trace] Init: (soa1.karlsbad2.promatis.de:80) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:33 00976] [trace] Init: (soa1.karlsbad2.promatis.de:443) Configuring permitted proxy SSL ciphers [DEFAULT]
    [04/Mai/2010 11:22:33 00976] [trace] Init: (127.0.0.1:7200) Configuring permitted proxy SSL ciphers [DEFAULT]

    Did you find a solution to this issue? We are having a similar issue trying to deploy a Paypal IPN on OAS 10.1.2.3. The IPN messages coming from Paypal appear to be attempting an SSLv2 handshake. In our case SSLv2 is disabled due to our security requirements so the connection is killed by our App Server. We have found that manually sending the IPN messages works correctly.

  • Apache webserver can't find tomcat - mod_jk problem?

    Hi
    I have recently upgraded HP-UX apache software
    FROM
    Apache webserver: 2.0.55
    Apache tomcat : 5.5.9
    TO
    Apache webserver: 2.0.55
    Apache tomcat : 5.5.9
    I have 2 tomcats running, one JVM for a daytime service and another for a nighttime service.
    So while 1 tomcat is down, the other is up, apache always running.
    However, since I have upgraded, I see the following error messages in jk.log:
    [Mon Nov 20 07:00:41 2006] [error] ajp_connection_tcp_get_message::jk_ajp_common
    .c (949): ERROR: can't receive the response message from tomcat, network problems or tomcat is down (127.0.0.1:8059), err=-232
    The tomcat in question is up - and the messages returned are 500 responses - server configuration issue.
    Get several a day.
    Basically using mod_jk to bind the tomcat installations to apache webserver.
    What is new though in mod_jk 1.2.10 is that a shared memory file is specified. I am wondering what happens to this memory that is used to load balance the workers when tomcats are bounced.
    Issues go away after a bounce of apache - but after each tomcat has been stopped once - messages start to fail intermittently after that.
    Done some googling but do not see any solutions - so here's hoping!
    Thanks.

    Noticed my deliberate mistake!
    From
    Apache 2.0.32
    Tomcat 3
    Still no joy with with this in terms of finding a solution to why the newer version of apache cannot find tomcat after it has been bounced.
    mod_jk.so version 1.2.9 introduced the shared memory for the workers, which as far as I can is the main config change in the 2 versions of apache that came from HP.
    So rolled back to the old version of apache with the new version of tomcat - and everything works fine!

  • Problem in configuring Apache Web Server v2.2

    Hi,
    I am facing problem in configuring apache web server with tomcat 7.0. I want to configure the web server in such a way that I can access the application only using the localhost(without appending the port to it). Ex I want to access the application through "http://localhost" instead of "http://localhost:8080".
    I tried to configure it using the concept of vertical clustering and "load balancer", but failed to do that.
    Can anyone please tell me steps to configure apache web server with tomcat or provide any useful link / urls to do that one.
    Thanks in advance

    The only way you can achieve it is by running the web server to listen on port 80
    Please change the port in your httpd.conf file for the webserver and restart it.
    If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
    Arun

  • Can't access apache webserver from external IPs with 10.5.5

    I've just setup a new install of 10.5.5. I have one website configured on port 443 with SSL enabled. It all works fine internally.
    My router forwards external requests on 443 on to the local machine (192.168.5.1) which I can see working as the server's firewall is logging the access as accepted:
    Nov 24 19:37:10 server ipfw[4657]: 12308 Accept TCP 82.132.136.215:58095 192.168.5.1:443 in via en0
    So neither the router nor the OS X server firewall is blocking the request, but the webserver is not responding. There is no mention of the access request in the apache access or error log.
    As mentioned, the server is working perfectly from local IPs on the same subnet. netstat shows this setup for port 443:
    tcp46 0 0 *.443 . LISTEN
    Any one any ideas on what I can do to diagnose this? I had this working perfectly with OS X client's apache but since installing the server version I have no access from external IPs.
    Cheers
    Russell

    Hi Harry, as expected, telnet server 22 works and responds with
    Escape character is '^]'.
    SSH-2.0-OpenSSH_5.1
    But telnetting to 443 fails to connect after a minute or so and responds with
    telnet: connect to address XX.XX.XX.XX: Operation timed out
    telnet: Unable to connect to remote host
    It may well be something to do with my IP setup. Internally, my network is on 192.168.5.X/255.255.255.0. My server is 192.168.5.1 and also provides internal DNS. Telnet works from internal IPs.
    Externally I have a static IP and external DNS requests resolve to this static IP (as I can ssh to myserver.mydomain.com from external addresses and 'host myserver.mydomain.com' returns the correct info).
    Perhaps Apache isn't responding because its seeing a request to the external IP address coming in, but I thought setting the site to respond to address 'any' should over come this. It worked fine with the client.
    Cheers
    Russell

  • Configuring Apache HTTP Server with Oracle Weblogic Server plugin

    Hello friends,
    I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
    Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
    One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
    When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
    Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
    *************************************************log****************************************************
    Server Details are:
    OrigHostInfo [192.168.1.200]
    isOrigHostInfoDNS [0]
    Host [192.168.1.200]
    Port [7002]
    SecurePort [7004]
    Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
    Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
    Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
    Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
    Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
    Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
    Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
    Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
    Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
    Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
    Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3160
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431>
    ================New Request: [GET /images/cab.gif HTTP/1.1] =================
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
    Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
    Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
    Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
    Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
    Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
    Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
    Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
    Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
    secondaryJVMID: [NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
    initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
    Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
    initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
    Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
    Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
    Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
    Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
    Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
    Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
    Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
    Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
    Server Details are:
    OrigHostInfo [192.168.1.200]
    isOrigHostInfoDNS [0]
    Host [192.168.1.200]
    Port [7002]
    SecurePort [7004]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
    Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
    Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
    Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
    Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
    Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
    Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3160
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Thanks

    "One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
    Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
    with server 3 going down it does 1-2-1-2-1...
    An example configuration (with SSL off) looks as follows:
    LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
    <IfModule weblogic_module>
         ConnectTimeoutSecs 10
         ConnectRetrySecs 2
         DebugConfigInfo ON
         WLSocketTimeoutSecs 2
         WLIOTimeoutSecs 300
         Idempotent ON
         FileCaching ON
         KeepAliveSecs 20
         KeepAliveEnabled ON
         DynamicServerList ON
         WLProxySSL OFF
    </IfModule>
    <Location /LoadTest6>
         SetHandler weblogic-handler
         WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
    </Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
    "the plugin sometimes redirects to the other active node"
    This is somewhat strange, do you have session binding turned off?
    "and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
    This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
    and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

  • Configure Apache Web Server in WLP 8.1

    Hi,
    pls let me know, how to configure Apache Web Server with WLP 8.1
    Thanks,
    Natesh.

    U need to have mod_wl_20.so and some changes in httpd.config.
    Here are the changes
    1) change the servername to webserver host
    2) Change the serveradmin to webserver host
    3) include mod_wl_20.so into load config modules.
    and some more.
    There should be good in internet regarding this.

  • Shared services registration failing during configuration of EPMA 11.1.1.3

    Hi All, I am currently woking on essbase and no knowledge of planning so trying to upgrade my knowledge. I installed epma 11.1.1.3 on windows 2003 VMware work station as I have windows 7 laptop. installed oracle 10g created a database (epma) created user/schemas (sm,ms) trying to configure foundation services, essbase, planning and reporting and analysis. the configure database and register with shared services failed. Am I doing anything wrong. I followed some documents for configuration which are well documented with screen shots still do not know what wrong I am doing. Please advice on how to avoid these failures.
    Below is the validation results of the configuration.
    Thanks in advance.
    Srinivas
    Oracle EPM System
    Diagnostic Reports
    Generated on 3/3/12 11:05 PM
    Validation run on srinivas
    Validation tool info: 11.1.1.3.0 drop 9-0 build 3129 on 07/16/2009 01:24 PM
    OS name: Windows 2003
    OS version: 5.2
    Test Status Service Test Description Duration
    Hyperion Foundation
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    relationalStorageConfiguration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    FAILED OPN: OpenLDAP Check if global roles number no less than 16
    Error: $item.exception.localizedMessage
    Recommended Action: 0 s
    FAILED OPN: OpenLDAP Connection to OpenLDAP
    Error: srinivas:28089
    Recommended Action: Start open LDAP 1 s
    ERP Integrator
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Essbase / Client
    PASSED WR: Windows Registry Check if EQD excel addin registered for Essbase Client 0 s
    Essbase / Essbase
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    FAILED EAS: Essbase server Essbase Server startup check using Maxl command
    Error: Result: Unable to connect Essbase Server using MAXL command. Please check that essbase server is running.
    Recommended Action: Check Essbase Server is started. 0 s
    FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
    Recommended Action: Make sure external checker is working. 7 s
    Essbase / Essbase Administration Services
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Essbase / Provider Services
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks 0 s
    Essbase / Smart Search
    PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
    Essbase / Studio
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Financial Data Quality Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Foundation / Calculation Manager
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Foundation / Performance Management Architect
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Foundation / Workspace
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    PASSED HTTP: Http Is file [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] empty 0 s
    PASSED HTTP: Http Check string [LoadModule jk_module modules/mod_jk] in file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
    PASSED REG: Registry All links are present in registry. 0 s
    Performance Scorecard
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Planning
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    applicationServerDeployment: Configuration Failed
    Some of suggested configuration tasks not completed yet.
    Recommended Action: Try to configure mentioned tasks 0 s
    Profitability and Cost Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Strategic Finance
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Financial Management
    PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
    Check whether all configuration tasks have been completed 0 s
    Reporting and Analysis
    PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
    FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
    Recommended Action: Make sure external checker is working. 3 s
    Test start time: 11:05:18 PM
    Test end time: 11:05:40 PM
    Total test duration: 21 s

    Thanks to all for your suggestions. Below is the log I have checked at the first instance of failure after that resitering with shared services failed for every product. Is this something to do withis database connection? Please advise on how to resolve it.
    Mar 6, 2012 10:48:54 AM org.apache.coyote.http11.Http11BaseProtocol init
    INFO: Initializing Coyote HTTP/1.1 on http-28080
    Mar 6, 2012 10:48:54 AM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 3531 ms
    Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Hyperion Embedded Java Container/1.0.0
    Mar 6, 2012 10:48:55 AM org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    log dir isC:\Hyperion\logs\SharedServices9
    urlManifest jar:file:/C:/Hyperion/deployments/Tomcat5/SharedServices9/webapps/interop/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
    Shared Services Version: 11.1.1.3.24
    Shared Services Drop Number: 6
    Attempting to verify the database configuration
    Attempting to verify the database configuration
    Database configuration test passed.
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
    06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=C:/Hyperion/deployments/Tomcat5/SharedServices9/config/Domain.xml}
    configURL: file:///C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml
    Done initialize: null
    06 Mar 2012 10:50:35 - org.apache.slide.common.Domain - ERROR - Unable to migrate hub groups to css
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@9b2a51
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@2431b9
    CMSOfflineServlet Initialized
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.ces.utils.db.DBRegistryManager.<init>(DBRegistryManager.java:74) - Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,343 [main] ERROR com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:51) - com.hyperion.workflow.engine.api.base.WfException: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot getUsers.
    java.lang.NullPointerException
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:780)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
         at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot signOn.
    com.hyperion.workflow.engine.api.base.WfException: Cannot getUsers.null
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2593)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:782)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
         at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
         at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
         at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:39) - Error Getting the workflowEngine Cannot signOn.Cannot getUsers.null
    Mar 6, 2012 10:50:42 AM org.apache.coyote.http11.Http11BaseProtocol start
    INFO: Starting Coyote HTTP/1.1 on http-28080
    Mar 6, 2012 10:50:43 AM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:28082
    Mar 6, 2012 10:50:43 AM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/125 config=null
    Mar 6, 2012 10:50:43 AM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 108250 ms

  • Failed to configure schema record store. Failed to initialize record stores

    hi guys,
    i am creating endeca app using depolyment template module.
    While runnig intilalise_services.bat , i am facing this issue....
    Can anybody tel me the solution?
    Creating fresh record stores:
    Successfully created component: Discover_en_schema
    Successfully created component: Discover_en_dimvals
    Successfully created component: Discover_en_prules
    Successfully created component: Discover_en_data
    ==================================================
    Deploying rs configs:
    Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: Response was of unexpected text/html ContentType. Incoming portion of HTML stream: <HTML><HEAD><TITLE>Direc
    <H1>Directory: /Discover_en_schema/</H1>
    <TABLE BORDER=0>
    <TR><TD>WEB-INF/ </TD><TD ALIGN=right>0 bytes </TD><TD>Jan 17, 2013 11:50:08 AM</TD></TR></TABLE>
    </BODY></HTML>
    at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:156)
    at $Proxy53.setConfiguration(Unknown Source)
    at com.endeca.itl.recordstore.cmd.task.SetConfigurationTask.process(SetConfigurationTask.java:30)
    at com.endeca.itl.cmd.BaseCmd.run(BaseCmd.java:412)
    at com.endeca.itl.recordstore.cmd.RecordStoreCmd.main(RecordStoreCmd.java:111)
    Caused by: org.apache.cxf.interceptor.Fault: Response was of unexpected text/html ContentType. Incoming portion of HTML stream: <HTML><HEAD><TITLE>Directory: /Discover_en_s
    <H1>Directory: /Discover_en_schema/</H1>
    <TABLE BORDER=0>
    <TR><TD>WEB-INF/ </TD><TD ALIGN=right>0 bytes </TD><TD>Jan 17, 2013 11:50:08 AM</TD></TR></TABLE>
    </BODY></HTML>
    at org.apache.cxf.interceptor.StaxInInterceptor.handleMessage(StaxInInterceptor.java:79)
    at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:263)
    at org.apache.cxf.endpoint.ClientImpl.onMessage(ClientImpl.java:797)
    at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponseInternal(HTTPConduit.java:1618)
    at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponse(HTTPConduit.java:1491)
    at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:1399)
    at org.apache.cxf.io.AbstractWrappedOutputStream.close(AbstractWrappedOutputStream.java:72)
    at org.apache.cxf.io.AbstractThresholdOutputStream.close(AbstractThresholdOutputStream.java:102)
    at org.apache.cxf.transport.AbstractConduit.close(AbstractConduit.java:56)
    at org.apache.cxf.transport.http.HTTPConduit.close(HTTPConduit.java:646)
    at org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:62)
    at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:263)
    at org.apache.cxf.endpoint.ClientImpl.doInvoke(ClientImpl.java:533)
    at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:463)
    at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:366)
    at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:319)
    at org.apache.cxf.frontend.ClientProxy.invokeSync(ClientProxy.java:88)
    at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:134)
    ... 4 more
    Failed to configure schema record store.
    Failed to initialize record stores.

    This is related to the Oracle Endeca Commerce product. You should try your post in that forum.
    Technical Questions

Maybe you are looking for

  • Not getting e-mails on my Curve

    I've had my BB Curve for about 7 months and have had no problems at all. Two days ago, my e-mail just suddenly stopped coming. I have three e-mail accounts, and they've all stopped arriving on my BB. I checked on my laptop and I have a lot of e-mail,

  • How can I get Firefox to work?

    I am unable to get Firefox to work. I've uninstalled and reinstalled the program and created a new profile to no avail. When I open Firefox and type in a website address or attempt to complete a search, nothing happens. When entering a website, it ju

  • How to Install Flash Plugins?

    Hello everyone. I don't know how to install flash plugins to see video?

  • Acrobat does not start up

    Hi, Acrobat was initially working, when I bought my Touchpad yesterday. Then I 1. Uploaded about 12 PDF files via USB-disk mode and Acrobat still worked 2. I installed the update that Software Manager suggested (now it shows version 10.2.276) but now

  • Change the colors of the 3d world in Lingo

    Is there a way to trigger in lingo a color change of your 3d world? For example, in the game I'm creating, you are able to eat poisonous mushrooms. I was wondering if I could trigger something like a photo negative effect of what the player sees, or