Weblogic server not working on new Ip address

Hi,
I tried to change the listen Ip address for the weblogic server.
i am able to start the server on new Ip address but the console is not opening.
Please help.
I need to do this to make my weblogic server available in case of high availability.
thanks in advance.

Can you provide some more information on what was working, what you changed and what is working now?
What are you starting with the new IP? Admin Server? Managed Servers? If you goto to the Admin Server URL in a browser what do you see?
Thanks,
Mark

Similar Messages

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Weblogic 6 Post Installation Problem - weblogic.Server not found

I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
set CLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
set PATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visual Stud
io\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Visual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
set PATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visua
l Studio\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath .;.\lib\weblogic_sp.j
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserver "
-Dbea.home=d:\bea" "-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

It looks like your startWebLogic.cmd script has problems with the class
path. You should doublecheck that.
Thanks,
Michael
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Bindu Rao" <[email protected]> wrote in message
news:[email protected]...
>
I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
setCLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
setPATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisual Stud
io\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\MicrosoftVisual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
setPATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisua
l Studio\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft VisualStudio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath.;.\lib\weblogic_sp.j
>
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserv
er "
-Dbea.home=d:\bea""-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

Free busy information not working in new exchange site.

HI,
We have central site Exchange 2010 setup and it working fine . For business requirement we Installed new Exchange server(Mail/CAS/HUB) in new site.
Post installed, Auto discover and mail flow are working fine but Free/busy information is not working for new site mailbox users(Not working in outlook and OWA also).
I am having a strange error coming from outlook. When I run "Test E-mail AutoConfiguration" in Outlook, it comes up with Protocol: Exchange Http "wrong server name"
Please share your suggestion to change/configure "correct server name" in "Protocol: Exchange HTTP"
Protocol: Exchange HTTP
Server: wrong server name
Login name: testuser
SSL: Yes
Mutual Authentication: Yes
Note : ( Protocol: Exchange RPC show correct server information and other Urls (OOF, OAB, OWA, Availability server).)

Hi will martin,
Thanks for your reply..
Yes , I already pointed internal web service virtual directory ( "https://casarrayname/EWS/Exchan...) to CAS server in new site. Other internal URLs (OWA,ECP,OOF,Availability service) also pointed to
new site CAS server.
But , when i check Auto discover internal URI and URL. below is the result.
Result 1
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory -Server Servername
Name
Server InternalUrl
Autodiscover (Default Web Site)
Servername
Result 2
[PS] C:\Windows\system32>Get-ClientAccessServer -Identity servername |fl *internaluri*
AutoDiscoverServiceInternalUri : https://casarrayname/Autodiscover/Autodiscover.xml
When i tried to set interurl using the below command and it completed with no error but still InterURL not reflect.
command : Set-AutodiscoverVirtualDirectory -InternalURL https://casarrayname/Autodiscover/Autodiscover.xml

Weblogic server not starting due to connection pool error.

Hi all,
We have some issues with the network due to that, weblog server not able to create the connection pool or make physical connection with the database in the allocated time, we need to increase the timeout so that weblogic can wait and create a connection and then start the apps. How to achieve this?
Currently the server crashes and forcing to shutdown the error listed below
<Oct 10, 2012 5:08:47 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
<Oct 10, 2012 5:09:48 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
<Oct 10, 2012 5:10:49 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
<Oct 10, 2012 5:10:50 PM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'oltpDS' due to error weblogic.application.ModuleException: .
weblogic.application.ModuleException:
     at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: Socket read timed out
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:276)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:249)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1155)
     Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'oltpDS'. Resolved ''; remaining name 'oltpDS'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at com.healthedge.j2ee.PooledConnectionHelper.addDataSource(PooledConnectionHelper.java:202)
     at com.healthedge.j2ee.PooledConnectionHelper.getSTConnection(PooledConnectionHelper.java:281)
     at com.healthedge.j2ee.PooledConnectionHelper.getConnectionIgnoreTxn(PooledConnectionHelper.java:268)
     at com.healthedge.j2ee.PooledConnectionHelper.getConnection(PooledConnectionHelper.java:251)
     at com.healthedge.query.execution.Query.prepareStatement(Query.java:504)
     at com.healthedge.query.execution.Query.setValue(Query.java:716)
     at com.healthedge.config.util.ReferenceResolutionHelper.setConstraintValues(ReferenceResolutionHelper.java:277)
     at com.healthedge.config.util.ReferenceResolver.getTypeReference(ReferenceResolver.java:232)
     at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:221)
     at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:211)
     at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:187)
     at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:156)
     at com.healthedge.config.eval.HicIdentifier.getReference(HicIdentifier.java:58)
     at com.healthedge.startup.StartupService.startup(StartupService.java:56)
     at com.healthedge.startup.wl.WLStartupService.main(WLStartupService.java:13)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeMain(ClassDeploymentManager.java:362)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:272)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:214)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployment(ClassDeploymentManager.java:207)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployments(ClassDeploymentManager.java:186)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.runStartupsAfterAppAdminState(ClassDeploymentManager.java:162)
     at weblogic.management.deploy.classdeployment.StartupClassPrelistenService.start(StartupClassPrelistenService.java:13)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
NESTED TRACES DONE
>
<Oct 10, 2012 5:11:18 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Oct 10, 2012 5:11:18 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Oct 10, 2012 5:11:18 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Hi,
It looks like your DB is down for now and that is reason why the server cannot initialize your App while startup.
Check which Data source you are using and make initial capacity as zero and try to restart the server again.
Note: you need to do this changes from JMS module under %Domain_Home% / config / jdbc/
Regards,
Kal

OAM 11G Weblogic Server Not listening

I have installed few things including OAM, OAAM, entitlement server etc using the 11G installation suite. (on windows 2003 server)
Also I have installed the weblogic server (forget the version, should 11 something).
I have created the weblogic domains for OAM
I have done RCU with no error message, tables created.
There seems to be no error during the installation. I ironed the steps that there are no more warning and error message.
I started weblogic server. It goes to the point to a "STARTED" state. not in RUNNING STATE. ANd the windows console stay still.
When I try to access admin console 7001 weblogic. Seems that the server is not listening, I cannot access to the user interface.
Meanwhile there are no error messages or exceptions I can trace while the weblogic server is not working.
Personally I do not feel the weblogic server is not listening because of the memory leak.
When I observe the windows task manager, I saw memory leak, the memory of the server increase steadily even the weblogic is not working. After half an hour, it throw out of memory exception. I tried to play with the heap size of java to 1024G, but no help. Problem is it is leaking no matter how much memory allocate there will be problem.
Can anyone tell me is there some steps I am missing? or is there known bugs? Or what else I can do to troubleshoot this?
I can provide you all the version of the software I am using. AFter two weeks.... since the lab would be down for renovation purposes.
Thanks
Eric

Eric,
try to install JRockit Mission control to grab more details of what is going wrong there.
link:
http://docs.oracle.com/cd/E13150_01/jrockit_jvm/jrockit/releases/R27/install/install.html
and
http://www.oracle.com/technetwork/middleware/jrockit/downloads/index.html
I hope this helps,
Thiago Leoncio.

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

LR 5 not working on new Macbook Pro.

LR 5 not working on new Macbook Pro. Have tried 2 CC downloads, 5.6 licensed download and 5.5 licensed download, all result in the same thing. It comes up with basic screen but no panels and gives an error occurred when changing modules. Nothing I've tried seems to help. It also has says "get started with lightroom mobile at top left although it says it is Lr 5.6. Anybody else having problems? Calls to adobe result in no help and have to wait till Monday for some technical support. Surely this should run on a NEW laptop with no other software installed!!!

Install logs were fine. Application installed but wouldn't run properly. Finally got Adobe support and it turns out to be a file permissions error. Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/ and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders. Runs fine now. Including this here in case anyone else runs across this issue.

YOUTUBE NOT WORKING ON NEW MACBOOK PRO

YOUTUBE NOT WORKING ON NEW MACBOOK PRO
Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
Please help I have everything possible up to date.
Thanks!

It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Force encryption on SQL Server not working?

Hello Everyone,
I'm running SQL Server 2008 64-bit. I've installed a self-signed cert on the box and set "Force Encryption" and restarted SQL server.
I setup a client machine to trust the authority of the cert installed on the server. When I connect to that SQL server from SSMS from a client machine and select the "encrypt connection" option in the client Connection properties, SSMS correctly complains
that the cert on the server does not match the computer name I asked to log into . This is because, although the cert is trusted, the dns name dos not match the CN in the cert <- Perfect, exactly what I am expecting.
When I connect to the same SQL server from the same client but UNCHECK "encrypt connection" on the client, I'm able to login. Considering I've checked the "Force Encryption" on the server, the server should have rejected the connection. Why not?
Ameer Deen

Hi all,
We are implementing a Merge Synchronization solution which involves three SQL Servers located on three Azure locations worldwide and one on-premises location. We need to secure communications between all servers. We are evaluating the encryption of all server
communications through SSL:
http://technet.microsoft.com/en-us/library/ms191192.aspx
When we configure one server (let’s call it server A) to accept only encrypted connections (with Force Encryption=Yes) we still can connect from other server (let’s call it server B) that do not have the certificate installed. We would expect the server
B to fail in the attempt of connect as server A should only accept encrypted communications and those should need the certificated to encrypt/decrypt everything (commands and data).
We have also review the following forum post that is very similar to this one:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bde679d9-ff83-4fa7-b402-42e336a97106/force-encryption-on-sql-server-not-working
In all cases the Microsoft answer is:
“When the
Force Encryption option for the Database Engine is set to YES, all communications between client and server is encrypted no matter whether the “Encrypt
connection” option (such as from SSMS) is checked or not. You can check it using the following DMV statement”
When we run the provided DMV statement to check if encryption is enabled:
-- To check whether connections are encrypted between server and clients
SELECT encrypt_option
FROM sys.dm_exec_connections
We get “TRUE”. So theoretically encryption is enabled.
Then:
Why can we run SQL statements against server A from server B (with SSMS) without any certificate?
Are we wrong when we expect server A to refuse any client that do not have the right certificate?
How can server B, without any certificate, decrypt the data encrypted by server A?
Our intention is to encrypt all server in the same way so all of them will accept only encrypted communications. We are assuming that the Merge Agent will be able to communicate with the Publisher and the Subscriber through this encrypted environment. May
anyone please confirm ti?
Thanks for your help.
Best Regards
Benjamin Moles

WL Cluster: install of weblogic is not working properly

Cluster install of weblogic is not working properly. We are getting kicked out every now and then
from the portal when both PIA1 and PIA2 nodes are up. When we shut down one meaning switch off clustering
then we are fine(Portal becomes very stable).
env setup:
Weblogic 9.2 with MP1-p5 and all the patches on Oracle Enterprise Linux 4 32 bit
PTools version - 8.49.08
Here is the message at the Kernel level if that any help:
Oct 7 10:43:22 hrrecweb01 kernel: Badness in local_bh_enable at kernel/softirq. c:141
Oct 7 10:43:23 hrrecweb01 kernel: [<c0121178>] local_bh_enable+0x3f/0x62
Oct 7 10:43:23 hrrecweb01 kernel: [<c02177b9>] skb_checksum+0x133/0x25e
Oct 7 10:43:23 hrrecweb01 kernel: [<c0250f36>] udp_poll+0x66/0x113
Oct 7 10:43:23 hrrecweb01 kernel: [<c02135e1>] sock_poll+0x19/0x1d
Oct 7 10:43:23 hrrecweb01 kernel: [<c016d777>] do_pollfd+0x42/0x7d
HRRECWEB01 is WebServer name
any thoughts? Is there a kernel variable or settings for linux that I need to set for
cluster weblogic install?
Thanks/Thaya

Kunal,
Have you tried clearing the browser cache?
-Arun

Weblogic server not working on new Ip address

Similar Messages

Maybe you are looking for