Weblogic12c and JDK 7 together not using login configuration file properly

Hello,
Little puzzled by this.
I ve installed JDK 7 along with Weblogic 12c and made a custom installation of Weblogic to use JDK 7 as the Local JDK
as mentioned in this doc
http://docs.oracle.com/cd/E24329_01/doc.1211/e24492/jdk7.htm
The JAVA_HOME is pointing to JDK 7
When i configure the login.config.url.1 under JAVA_HOME/jre/lib/security/java.security file to use our own specific file which is used for authentication against LDAP,
deploy the app and try to login, authentication fails(LoginException is thrown), like as if it s not understanding this file or the path or similar.
When i configure the same to use the JDK 6 that comes along with Weblogic 12c, everything is fine.....
Not sure where the problem lies.
Is there any other setting i need to do?
Any help is greatly appreciated.
The Exception thrown is
javax.security.auth.login.LoginException: java.util.MissingResourceException: Can't find resource for bundle sun.security.util.AuthResour
ces, key username: at java.util.ResourceBundle.getObject(ResourceBundle.java:393)
at java.util.ResourceBundle.getString(ResourceBundle.java:353)
at ........
Edited by: 902337 on Jan 6, 2012 11:08 AM

Just adding here that if i install JDK 6 outside of weblogic 12 and point to it, that also works fine.
The problem seems to be weblogic 12 pointing to JDK 7 only ...

Similar Messages

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

Apps are tied to the Apple ID that was used to purchase them and you will always need to use that ID and password in order to update them.
Saying that you do get to update them on your new details makes no sense at all.

HT4436 We changed the iCloud account on the Mac Book and now we can not use some part of iCloud like Documents, etc on the Mac book to sync to iPad.

Hi,
We changed the iCloud account on the Mac Book and now we can not use some part of iCloud like Documents, etc on the Mac book to sync to iPad.
It says it is not the principal account.
Regards,
JG

The iPad and the Mac need to be signed into the same account, 2 different accounts won't work

My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4

My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4

Settings > iTunes and App Store > Apple ID > Sign Out > Sign In with the current Apple ID
Settings > iCloud > (Scroll Down) Delete Account > Sign In with the current Apple ID

I bought an iphone and the guy has not used it in a year now i need to activate it and its linked to his icloud account so i cannot turn the phone on what can i do ???

i bought an iphone and the guy has not used it in a year now i need to activate it and its linked to his icloud account so i cannot turn the phone on what can i do ???

Here's what you can do:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
If you can't get the info needed, you can't use the device, sorry.

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?

Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

"Could not write to configuration file" when config Publisher in admin tab

Hi guys,
I have install OBIEE 10.3.3.4 on an RH linux box (with OS user obiee) and Oracle Application Server 10.1.3.1 on the same box (with OS user oraias).
When I want to change some parameter in the admin tab of BI publisher (Administrator/Administrator as the login name/pass) and click "Apply",
I get the error "Could not write to configuration file". After I change the configuration properties to 777 the error is sitll there. And I also try to change the SECURITY MODEL to XDO, but still no use.
I made a test, for example, when I change something in admin--JDBC--Oracle BIEE and then apply, I got the error. If I update xmlp/DataSource/datasources.xml manually, the change can be seen after I reopen the page admin--JDBC--Oracle BIEE. That means I find the correct file and the file access properties is ok.
For other parameters such as Scheduler Configuration, I got the same error when apply. But the "Test connection" and "Install schema" work.
Can somebody give me some advise on this ? Thanks
Scott
Edited by: Typhoon on Mar 20, 2009 12:59 AM

I have install the same version(basic install) on another windows box, everything seems good...
And below is the error log I find in application.log
09/03/19 13:31:53.956 xmlpserver: Servlet error
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.handleSubmit(SchedulerConfigPage.java:248)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.doPost(SchedulerConfigPage.java:166)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:86)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

XML DB repository/ Could not write to configuration file

I have one problem when I create same JDBC datasource and test connection I get: "Connection established successfully". but when I trying to save it I get: "Could not write to configuration file".
I using Oracle XE 10g database and "system" user for JNDI connection. I tryed with new user witch I gived all database permissions but I get same error message.
Do you have any idea what do I need to configure.
Thanks!

This error happens, when the file permission is missing.
or the file got corrupted, change the permission to Admin folder.
Check the folder permission to this oc4j\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF

Requested node not found in configuration file

The following warning appears when I instantiate the ReportClientDocument object:
[main] WARN com.businessobjects.reports.sdk.JRCCommunicationAdapter - Requested node not found in configuration file
This looks to me like a configuration issue. How can I get rid of it?

Please read the rules of engagement and add all of the missing info. I'm assuming you are developing in Java so moved your post to the Java forum.

ServletRunnerInfo not found in configuration file

I'm getting the following error message
ServletRunnerInfo not found in configuration file
for a servlet that I've never changed. The servlet was written by another developer sometime last year and it seems to have stopped working correctly over a month ago.
I've checked the XML files and both have entries for the servlet. Anyone have an idea of how to resolve this?

Sounds like an init parameter definition might be missing from the within this servlets definition in the web.xml file. Might need something like:
<init-param>
<param-name>ServletRunnerInfo</param-name>
<param-value>Something or other config information</param-value>
</init-param>You could tell if the init() method of the actual servlet asks for:
config.getInitParameter("ServletRunnerInfo"));Then that is the problem for sure. Otherwise ... ????

Bi publisher "Could not write to configuration file"

Running 10.1.3.4.1, Whenever I try to create a new resource I get "Could not write to configuration file" message.
If I look in the WLS log I see Server failed to obtain lock for /Security/principals.xml
If I look in XMLP/Admin/Security, I see principals.xml.lock file with todays date
All files in the xmlpserver folder are owned by the weblogic user

moving the deployment from a nfs mount to a local file system resolved the problem

HT4796 i have successfully migrated the music but it just shows up in my files and has not updated my iTunes library which is still getting the music from iCloud and is not using the migrated files. Any ideas?

I have successfully used windows migration software to move my music library from a PC to my MacBook Air.
However the music files are just stored in my file system and have not updated my itunes files. Itunes is still getting the music down from icloud instead of using the music files.
Any ideas?

If you're using Windows Movie Maker and HP Photo to build slide shows, this is not an iPod touch issue (nor an iTunes issue), so I'd suggest you take up the problem on a web site that deals with Movie Maker or HP Photo issues. It's really not something we can help with in this forum.
If you're building this slide show on your iPod, please post back and tell us what app(s) you're trying to use, and whether the iPod app on your iPod touch shows and plays your songs correctly. Knowing the specific model of iPod you have and the version of iOS it's running will probably also help.
Regards.

Lookup-table and query-database do not use global transaction

Hi,
following problem:
DbAdapter inserts data into DB (i.e. an invoice).
Process takes part in global transaction.
After the insert there is a transformation which uses query-database and / or lookup-table.
It seems these XPath / XSLT functions are NOT taking part in the transaction and so we can not access information from the current db transaction.
I know workarounds like using DbAdapter for every query needed, etc. but this will cost a lot of time to change.
Is there any way to share transaction in both DbAdapter insert AND lookup-table and query-database?
Thanks, Best Regards,
Martin

One dba contacted me and made this statement:
Import & export utilities are not independent from characterset. All
user data in text related datatypes is exported using the character set
of the source database. If the character sets of the source and target
databases do not match a single conversion is performed.So far, that does not appear to be correct.
nls_characterset = AL32UTF8
nls_nchar_characterset = UTF8
Running on Windows.
EXP produces a backup in WE8MSWIN1252.
I found that if I change the setting of the NLS_LANG registry setting for my oracle home, the exp utility exports to that character set.
I changed the nls_lang
from AMERICAN_AMERICA.WE8MSWIN1252
to AMERICAN_AMERICA.UTF8
Unfortunately , the export isn't working right, although it did change character sets.
I get a warning on a possible character set conversion issue from AL32UTF8 to UTF8.
Plus, I get an EXP_00056 Oracle error 932 encountered
ORA-00932: inconsistent datatypes: expected BLOB, CLOB, get CHAR.
EXP-00000: export terminated unsuccessfully.
The schema I'm exporting with has exactly one procedure in it. Nothing else.
I guess getting a new error message is progress. :)
Still can't store multi-lingual characters in data tables.

Weblogic12c and JDK 7 together not using login configuration file properly

Similar Messages

Maybe you are looking for