Webservies in OIMM 11gR2

Hi,
I need to provision to BMC Remedy Ticket Management. This is OIM 11gR2 and BMC Connectors are not certified on R2, since BMC AR 7.1 is all 32 bit and
OIM 11gR2 is 64 bit only.
So, the client has a BMC TM Web service running and I need to develop a client on OIM side to call the BMC TM Webservice and pass 5 attrs to the webservice to create a ticket in BMC.
Please help me on this.
Thanks
Kunal Jain
[email protected]

Get the WSDL url for BMC Remedy Ticket Management and generate stubs. You can use Netbeans IDE or Eclipse WTP to generate stubs.
Check this link to generate stubs using eclipse wtp http://www.eclipse.org/webtools/community/tutorials/BottomUpAxis2WebService/bu_tutorial.html
Now write the client code for implementing create ticket operations and test it using the client. Build the jar and upload it to OIM server. Create adapters and test the provisioning operations from OIM.

Similar Messages

Peoplesoft Webserver Issue

Hi All,
I have installed webserver and PIA...on Oracle Linux 6...im using PT8.53 and HCM9.2 on Oracle 11gR2...OS is OEL 6...
I am unable to connect to peoplesoft site the weblogic logs says...
<Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default[2]]> <<WLS Kernel>> <> <> <1365055321313> <BEA-002606> <Unable to create a server socket for listening on channel "Default[2]". The address fe80:0:0:0:223:24ff:fe2b:cb7c might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Critical> <WebLogicServer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321313> <BEA-000362> <Server failed. Reason: Server failed to bind to any usable port. See preceeding log message for details.>
####<Apr 4, 2013 11:32:01 AM IST> <Notice> <WebLogicServer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321314> <BEA-000365> <Server state changed to FAILED>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <WebLogicServer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321314> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1365055321314> <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address 10.201.30.84 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Notice> <WebLogicServer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321316> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[1]]> <<WLS Kernel>> <> <> <1365055321316> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[1]". The address 192.168.122.1 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321318> <BEA-149059> <Module /helloportletapp of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default[1]]> <<WLS Kernel>> <> <> <1365055321319> <BEA-002606> <Unable to create a server socket for listening on channel "Default[1]". The address 192.168.122.1 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[2]]> <<WLS Kernel>> <> <> <1365055321319> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[2]". The address fe80:0:0:0:223:24ff:fe2b:cb7c might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default[4]]> <<WLS Kernel>> <> <> <1365055321319> <BEA-002606> <Unable to create a server socket for listening on channel "Default[4]". The address 0:0:0:0:0:0:0:1 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default[3]]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "Default[3]". The address 127.0.0.1 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[3]]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[3]". The address 127.0.0.1 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[4]]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[4]". The address 0:0:0:0:0:0:0:1 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 10.201.30.84 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321321> <BEA-149060> <Module /helloportletapp of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321322> <BEA-149059> <Module /wsrptest of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321322> <BEA-149060> <Module /wsrptest of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321322> <BEA-149059> <Module /testsuite of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321323> <BEA-149060> <Module /testsuite of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321323> <BEA-149059> <Module /pspc of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321323> <BEA-149060> <Module /pspc of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321324> <BEA-149059> <Module /PSEMHUB of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321324> <BEA-149060> <Module /PSEMHUB of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321324> <BEA-149059> <Module /PSOL of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321325> <BEA-149060> <Module /PSOL of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321325> <BEA-149059> <Module /PSINTERLINKS of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321325> <BEA-149060> <Module /PSINTERLINKS of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321325> <BEA-149059> <Module /PSIGW of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321326> <BEA-149060> <Module /PSIGW of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321326> <BEA-149059> <Module / of application peoplesoft is transitioning from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321326> <BEA-149060> <Module / of application peoplesoft successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Diagnostics> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321364> <BEA-320002> <The Diagnostics subsystem is stopping on Server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <WseeCore> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321364> <BEA-220504> <The Wsee Service is halting>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <SAFService> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321365> <BEA-281004> <SAF Service has been suspended.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <SAFService> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321365> <BEA-281005> <SAF Service has been shut down.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JMX> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321371> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://10.201.30.84:130/jndi/weblogic.management.mbeanservers.domainruntime .>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JMX> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321371> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://10.201.30.84:130/jndi/weblogic.management.mbeanservers.edit .>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JMX> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321372> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://10.201.30.84:130/jndi/weblogic.management.mbeanservers.runtime .>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <WebService> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321372> <BEA-220028> <Web Service reliable agents are suspended.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <WebService> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321372> <BEA-220029> <Web Service reliable agents are shut down.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <MessagingBridge> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321377> <BEA-200001> <The messaging bridge service has successfully shut down.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321379> <BEA-149059> <Module /helloportletapp of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321384> <BEA-149060> <Module /helloportletapp of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321385> <BEA-149059> <Module /wsrptest of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321387> <BEA-149060> <Module /wsrptest of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321387> <BEA-149059> <Module /testsuite of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321389> <BEA-149060> <Module /testsuite of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321389> <BEA-149059> <Module /pspc of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321393> <BEA-149060> <Module /pspc of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321393> <BEA-149059> <Module /PSEMHUB of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321395> <BEA-149060> <Module /PSEMHUB of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321395> <BEA-149059> <Module /PSOL of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321397> <BEA-149060> <Module /PSOL of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321397> <BEA-149059> <Module /PSINTERLINKS of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321399> <BEA-149060> <Module /PSINTERLINKS of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321399> <BEA-149059> <Module /PSIGW of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321402> <BEA-149060> <Module /PSIGW of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321402> <BEA-149059> <Module / of application peoplesoft is transitioning from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <Deployer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321405> <BEA-149060> <Module / of application peoplesoft successfully transitioned from STATE_ADMIN to STATE_PREPARED on server PIA.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JMS> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321650> <BEA-040308> <JMS service is suspending.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JMS> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321682> <BEA-040107> <Undeployed 8 default connection factories.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JMS> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321682> <BEA-040015> <JMS shutdown is complete.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JDBC> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321683> <BEA-001144> <Force Suspending the JDBC service.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JDBC> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321683> <BEA-001146> <Force suspend of the JDBC service completed.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JDBC> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321683> <BEA-001147> <Shutting down the JDBC service.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <JDBC> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321683> <BEA-001149> <Shutdown of the JDBC service has completed.>
####<Apr 4, 2013 11:32:01 AM IST> <Info> <WebLogicServer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321698> <BEA-000236> <Stopping execute threads.>
HCM92.log says...
<Error> <WebLogicServer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321314> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1365055321314> <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address 10.201.30.84 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Notice> <WebLogicServer> <wipcoe1234> <PIA> <main> <<WLS Kernel>> <> <> <1365055321316> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[1]]> <<WLS Kernel>> <> <> <1365055321316> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[1]". The address 192.168.122.1 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default[1]]> <<WLS Kernel>> <> <> <1365055321319> <BEA-002606> <Unable to create a server socket for listening on channel "Default[1]". The address 192.168.122.1 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[2]]> <<WLS Kernel>> <> <> <1365055321319> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[2]". The address fe80:0:0:0:223:24ff:fe2b:cb7c might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default[4]]> <<WLS Kernel>> <> <> <1365055321319> <BEA-002606> <Unable to create a server socket for listening on channel "Default[4]". The address 0:0:0:0:0:0:0:1 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicListenThread[Default[3]]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "Default[3]". The address 127.0.0.1 might be incorrect or another process is using port 130: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[3]]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[3]". The address 127.0.0.1 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure[4]]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[4]". The address 0:0:0:0:0:0:0:1 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
####<Apr 4, 2013 11:32:01 AM IST> <Error> <Server> <wipcoe1234> <PIA> <DynamicSSLListenThread[DefaultSecure]> <<WLS Kernel>> <> <> <1365055321320> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 10.201.30.84 might be incorrect or another process is using port 453: java.net.BindException: Permission denied.>
What is the issue??
Edited by: ajith on Apr 4, 2013 12:39 PM

Thanks all,i got it solved.
Solution:
Re: PSWATCHSRV does not auto-restart causing app server domain instability

How to protect an application running on IIS with OAM 11gR2

Hello Gurus,
I have a question regarding protecting an application running on IIS with OAM 11gR2. We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page. These is all solaris. I am protecting other applications like pplsoft moduels with this OHS instance and OAM server. There is another application that I need to protect which is itself running on IIS windows machine. I need guidance as to -
1.) Do I need to install a windows version of webgate to protect this IIS based application?
2.) Or I can still protect and proxy requests from this application to current OHS instance? How can I do this?
3.) Or Do I need to proxy requests directly from IIS to OAM weblogic server?
Please advise to the earliest as this is an urgent issue.
Thanks !!

From your description it is not clear how exactly architecture looks like
We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page.
is this OHS centralized login farm ? (Case 1)
OR is this OHS server (with webgate) acting as virtual web server hosting multiple web sites so that request to any site passes through this OHS/webgate (Case 2)
1.) Do I need to install a windows version of webgate to protect this IIS based application?
If case 1 then you need to install 10g webgate on top of IIS server to protect this application
If case 2 then you can just proxy request from OHS to IIS server. As every request passes through OHS user will be authenticated before request hits IIS
Look at Product documentation for virtual web sites : http://docs.oracle.com/cd/E27559_01/admin.1112/e27239/shared.htm#autoId12
It has steps to protect virtual web sites.
Also you need to make sure no one hits IIIS web sites directly.
Hope this helps

Error while running root.sh in 11GR2 2 node cluster

Hi Friends,
I am trying to setup 11gR2 2 node RAC on RHEL 4.7. The cluvfy script shows everything as passed and grid infrastructure installation completes fine until I ran root.sh script. The root.sh script when run on node 1 exits with following error in console
DOCRAC1-N310 []:./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:>ORACLE_OWNER= oracle
>ORACLE_HOME= /app/oracle/grid
>
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying coraenv to /usr/local/bin ...
>
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-01-06 13:20:18: Parsing the host name
2011-01-06 13:20:18: Checking for super user privileges
2011-01-06 13:20:18: User has super user privileges
Using configuration parameter file: /app/oracle/grid/crs/install/crsconfig_params
PROTL-16: Internal Error
Command return code of 41 (10496) from command: /app/oracle/grid/bin/ocrconfig -local -upgrade oracle oinstall
Failed to create or upgrade OLRWhen I checked the logs in $GRID_HOME/log/<Node1>/client
I can see errors in ocrconfig_12426.log as
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2011-01-06 13:20:19.133: [ OCRCONF][2564297536]ocrconfig starts...
2011-01-06 13:20:19.134: [ default][2564297536]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ OCRCONF][2564297536]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Error [4] retrieving configuration type
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Exiting [status=failed]...and in crsctl.log
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:01.372: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown status
2011-01-06 13:19:11.502: [ default][2566642592]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ default][2566642592]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:11.503: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown statusI have tried to deinstall, reconfigure , but still no luck. I will be trying to use Oracle Deinstall utlity now. Before that I would like to get comments from experts
Thanks ,
SSN.

Consider moving this question to the Real Application Clusters forum.
Confirm that +/app/oracle/grid/crs/install/crsconfig_params+ exists before running root.sh - if it does, please post contents using tags to encapsulate the config text data.
Are you using ASM for managing voting and OCR disk storage, or are you manually setting these to specific block devices?

How to install 11gR2 RAC on 64 bit linux OS

I am completely new to this topic of RAC and need to be installing and standing up RAC on Linux 64 bit OS . I have good knowledge of installing oracle database ENTERPRISE version 11gR2.
Can you guide me as to how to start. I am looking for leads. Probably we will have 2 nodes.
Thank you very much for helping me in advance

If you are a My Oracle Support (Metalink) user, go check out these two notes created by the Oracle RAC Assurance Team. They are excellent.
NOTE: 810394.1 RAC Assurance Support Team: RAC Starter Kit and Best Practices (Generic)
NOTE: 811306.1 RAC Assurance Support Team: RAC Starter Kit (Linux)
In the Linux note mentioned above there is a link to a Linux Step by Step Instruction Guide. This step by step instruction guide is the best start to finish document I've seen for how to set-up and install Oracle RAC. I believe the guide is written for installing release 11.2.0.2.

Error in Starting WebServer (Ver 7) Admin Server

Hi,
I am getting the error shown below when starting the Webserver 7 admin
server. The Web server starts and I can administer the server but when deploying Access Manager getting agan the same java.lang.NoClassDefFoundError and can't AM complete configuration.
Please help me. After attending Access Manager 7.1 training
wanted to practice on this env.
My Env is:
uname -a:
SunOS sun1 5.10 Generic_120012-14 i86pc i386 i86pc
/etc/release:
Solaris 10 8/07 s10x_u4wos_12b X86
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
cat release_info :
Product=Java Enterprise System 5U1
Date=Mon Aug 20 18:05:55 PDT 2007
Build=08b
PatchLevel=000
[25/Dec/2007:19:06:54] info ( 8308): CORE1116: Sun Java System Web
Server 7.0U1 B07/18/2007 14:21
[25/Dec/2007:19:06:55] info ( 8309): CORE5076: Using [Java HotSpot(TM)
Server VM, Version 1.5.0_12] from [Sun Microsystems Inc.]
[25/Dec/2007:19:06:59] info ( 8309): WEB0100: Loading web module in
virtual server [admin-server] at [admingui]
[25/Dec/2007:19:07:00] info ( 8309): WEB0100: Loading web module in
virtual server [admin-server] at [jmxconnector]
[25/Dec/2007:19:07:06] info ( 8309): PWC1412: WebModule[jmxconnector]
ServletContext.log():PWC1409: Marking servlet remotejmx as unavailable
[25/Dec/2007:19:07:06] failure ( 8309): WebModule[jmxconnector]PWC1396:
Servlet /jmxconnector threw load() exception
java.lang.NoClassDefFoundError: javax/management/remote/message/Message
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)
at java.lang.Class.getConstructor0(Class.java:2671)
at java.lang.Class.newInstance0(Class.java:321)
at java.lang.Class.newInstance(Class.java:303)
at
org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1119)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:994)
at
org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4731)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:5123)
at com.sun.webserver.connector.nsapi.WebModule.start(WebModule.java:182)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1224)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:924)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1224)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:520)
at org.apache.catalina.startup.Embedded.start(Embedded.java:917)
at com.sun.enterprise.web.PwcWebContainer.onStartup(PwcWebContainer.java:70)
at
com.sun.webserver.connector.nsapi.WebContainer.start(WebContainer.java:472)
at com.sun.webserver.init.J2EERunner.confPostInit(J2EERunner.java:304)
[25/Dec/2007:19:07:06] info ( 8309): HTTP3072: admin-ssl-port:
https://sun1.mysite.com:8989 ready to accept requests
[25/Dec/2007:19:07:06] info ( 8309): HTTP3072: admin-http-port:
http://sun1.mysite.com:8800 ready to accept requests
[25/Dec/2007:19:07:06] info ( 8309): CORE3274: successful server startup

jmxremote_optional.jar has
javax/management/remote/message/Message.class
<server-class-path> in admin-server/config/server.xml contains path to this jar file. You may want to check if this jar file exists and has correct permissions.

OWB 11gR2 - Internal ERROR: Can not find the ACL containter

OWB 11gR2 - Internal ERROR: Can not find the ACL containter
=======================================
I am using OWB 11gR2 (11.2.0.1) on Win XP 32 bit. I have 3.23 GB RAM. OWB design center is ver slow on my desktop. We have our OWB repository is on Unix server.
We applied the patch 10270220.
We are getting
Internal ERROR: Can not find the ACL containter for object:CMPPhysicalMap@19654/id=104020/owningFCO=104020/proxyFor=(CMPPhysicalMapGen@19f99ae/id=104020/stname=null/pname=MAPPING_1/lname=MAPPING_1/status=POSTED/committed=true/persistent=true/propsLoaded=true)
What is happening here?
Thanks in helping.

We have a map with 3 sources and 1 target. The 3 sources pass through Joiner then Expression then Target.
We are getting this error, during deployment. It shows compling for awhile, then through this error.
Here is the piece from detail window:
===========
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:174)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2806)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:914)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1542)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:694)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:959)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:924)
     at oracle.wh.repos.pdl.dispatcher.EventDispatcherImpl.beforeReadObject(EventDispatcherImpl.java:824)
     at oracle.wh.repos.pdl.foundation.OWBRoot.beforeRead(OWBRoot.java:1785)
     at oracle.wh.repos.owbGen.CMPStringPropertyValueGen.getValue(CMPStringPropertyValueGen.java:217)
     at oracle.wh.repos.impl.properties.CMPStringPropertyValue.getValue(CMPStringPropertyValue.java:117)
     at oracle.wh.repos.impl.extended.PropertyFactory.getStringValue(PropertyFactory.java:440)
     at oracle.wh.repos.impl.extended.CMPWBPrimitiveProperty.rawStringValue(CMPWBPrimitiveProperty.java:260)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:716)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:733)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getReferencedLocations(WBMapHelper.java:1361)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:284)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:141)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:135)
     at oracle.wh.service.impl.runtime.RuntimePlatformServiceImpl.getReferencedLocations(RuntimePlatformServiceImpl.java:1238)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandUtil.addConnectorLocations(WHRuntimeCommandUtil.java:477)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getSingleDeployLocations(WHRuntimeCommandGenerateDeploy.java:3408)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getLocationsAndNewConnectors(WHRuntimeCommandGenerateDeploy.java:3517)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doPreDeploymentActions(WHRuntimeCommandGenerateDeploy.java:3224)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy._internalDeploy(WHRuntimeCommandGenerateDeploy.java:2420)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doDeploymentAsynch(WHRuntimeCommandGenerateDeploy.java:2117)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandHandler$1.construct(WHRuntimeCommandHandler.java:1005)
     at oracle.wh.ui.runtime.SwingWorker$2.run(SwingWorker.java:124)
     at java.lang.Thread.run(Thread.java:595)
===========
Did anyone receive such errors?

Question: 10gR2 database can not see the 11gR2 ASM diskgroup?

Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
Scott

What is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that

Issue JDBC connection pool with Glassfish 3.1.2.2 and Oracle XE 11gR2

Hello,
I am experiencing an issue with pinging a JDBC connection Pool.
I installed the following without any warnings or errors:
Operating System: Oracle Enterprise Linux 5
Oracle XE 11gR2 (11.2.0.2.0) database
Glassfish 3.1.2.2
I will refer to the steps I did after the installations
1) In the .profile file of the OS I add the following:
JRE_HOME=/usr/java/jre1.6.0_31; export JRE_HOME
JAVA_HOME=/usr/java/jdk1.6.0_31; export JAVA_HOME
GLASSFISH_DIR=/u01/glassfish3
GLASSFISH_HOME=/u01/glassfish3/glassfish
DERBY_HOME=$GLASSFISH_DIR/javadb
OPEN_MQ_HOME=$GLASSFISH_DIR/mq
PATH=:$JAVA_HOME/bin:$JRE_HOME/bin:$PATH:$HOME/bin:$GLASSFISH_HOME/bin:$DERBY_HOME/bin:$OPEN_MQ_HOME/bin
export GLASSFISH_HOME
export DERBY_HOME
export OPEN_MQ_HOME
export PATH
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/xe/lib; export LD_LIBRARY_PATH
. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh
2) I copied the ojdbc6.jar to the $GLASSFISH_HOME/domains/domain1/lib
3) I login to the Glassfish admin console and created a new JDBC Connection Pool.
Pool Name: ds_orasys
Resource Type: javax.sql.DataSource
Datasource Classname: oracle.jdbc.pool.OracleDataSource
User: [myschema]
Password: [myschema password]
URL: jdbc:oracle:thin:@localhost:1521:xe
When I ping the connection pool I get the following message in the server log:
[#|2012-10-23T12:14:37.069+0300|WARNING|glassfish3.1.2|javax.enterprise.resource.resourceadapter.com.sun.enterprise.connectors.service|_ThreadID=22;_ThreadName=Thread-2;|RAR8054: Exception while creating an unpooled [test] connection for pool [ ds_orasys ], Connection could not be allocated because: Invalid Oracle URL specified|#]
[#|2012-10-23T12:14:37.071+0300|SEVERE|glassfish3.1.2|org.glassfish.admingui|_ThreadID=19;_ThreadName=Thread-2;|RestResponse.getResponse() gives FAILURE. endpoint = 'http://212.205.62.217:4848/management/domain/resources/ping-connection-pool.json'; attrs = '{id=ds_orasys}'|#]
I tried to use different jar files. I used ojdbc6dms.jar and ojdbc14.jar.
I also copied the jar files in the $GLASSFISH_HOME/domains/domain1/lib/ext directory as some people suggested. Still no luck. I keep getting the same error messages in the server.log
Can anybody help me out or point me to the right direction.
Thank you in advance

The error is in the URL. It was in front of my eyes and I couldn't see the error. I skipped the ':' before the '@' when I created the pool. It is working fine now.

HTTPS connection from portal to external webserver

Hi,
I am looking for a way to open a HTTPS connection from portal server to an external webserver. According to <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e2/71c83edf72e16be10000000a114084/content.htm">SAP</a> the code should look like
KeyStore keystoreCAs = ...
SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
Does not look difficult, <b>but how do I create the keystore object</b>? The keystore object should somehow be connected to the portal server's keystore which manages the certificates of trusted Certificate Authorities.
Any ideas?
Regards,
Martin

Hi,
meanwhile I solved the problem by my own. The solution slightly simplified is given below.
javax.naming.InitialContext ctx = new javax.naming.InitialContext();
java.lang.Object o = ctx.lookup("keystore");
com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub manager = (com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub) o;
java.security.KeyStore keystoreCAs = manager.getKeystore("TrustedCAs");
com.sap.security.core.server.https.SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
java.net.HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
For connecting via a proxy the host name and port number of the proxy have to be set as System properties using "https.proxyHost" and "https.proxyPort".
java.util.Properties systemSettings = System.getProperties();
          systemSettings.put("proxySet", "true");
          systemSettings.put("https.proxyHost","192.168.0.1") ;
          systemSettings.put("https.proxyPort", "80") ;
Additionally you have to make sure that the server's certificate is issued by a trusted Certification Authority (Must have an entry in your Keystore "TrustedCAs"). To verify this use the Visual Administrator and view service "Key Storage".
Regards,
Martin

How to protect an application running on Apache Tomcat app server with OAM 11gR2

Gurus,
We have an Apache Tomcat based application named "ABCD" here at client site that we want OAM 11gR2 PS1 to integrate with for SSO purposes. I have successfully configured OHS to reverse proxy requests to Apache Tomcat server whenever somebody tries to access the application URL but still, I am getting the application login page once I have successfully authenticated on OAM SSO login page. The Tomcat based application is authenticating users against a "UserDatabase realm".
I know in terms of weblogic application, there is an OAM identity asserter provider which then populates the User Principal for the java environment with the authenticated OAM user. But there is no such OAM identity provider for Tomcat.
So my question is, is there an provider (or Tomcat equivalent) which will entrust authentication to a header, that could be used to populate the Java User Principal from the OAM_REMOTE_USER header? Is the weblogic equivalent of authentication providers present in tomcat as well? Are those called valves?
Please advise to the earliest.
Thanks !!

Aakash,
I did follow the 4 steps that you mentioned to me. Out of the 4 that you had mentioned, I already had the webgate in place on OHS server and I was already passing the remote_user http header in oam policy as action.
As part of Step #2: Install mod_jk plugin on OHS server that you mentioned
1.) I downloaded the tomcat connector - tomcat-connectors-1.2.37-src
2.) I had to run ./configure,make, make install on my OHS server which runs on RHEL 6. It created the mod_jk.so file. I pasted it in the needed folder.
3.) I then created the httpd.conf file and workers.properties file as said in the connector docs.
4.) Restarted OHS.
As part of Step #3: Configure tomcat's ajp connector that you mentioned and I went through all the links pasted below but didn't find actually what needs to be in place to configure tomcat's ajp connector. I do see in the server.xml of tomcat app server that the ajp 1.3 protocol is supported:
http://tomcat.apache.org/tomcat-4.0-doc/config/ajp.html
http://tomcat.apache.org/tomcat-3.3-doc/mod_jk-howto.html#s8
http://tomcat.apache.org/tomcat-7.0-doc/config/ajp.html
http://www.mulesoft.com/understanding-tomcat-connectors

    <Connector port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />

    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
Do we need to disable the HTTP protocol in Tomcat and keep only AJP connector enabled? If yes, how to do that?
I am trying to connect to the application from OHS server like so I am using the http protocal right? How should I use the ajp protocol to connect to tomcat application?
http://ohs-host:ohs-port/abcd
Thanks !!!!!

APEX Listener with APEX 3.0 on 11gR2

Yes, I am crazy.
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.
The APEX listener appears to be more than just a Java PL/SQL gateway.
Is there a minimum version of APEX the APEX Listener supports?
Interested in pointers!
Rob

Hi Rob,
Yes, I am crazy.Why would that be? ;)
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.APEX 3.0 is supprted by EPG. See the [url http://docs.oracle.com/cd/B32472_01/doc/install.300/b32468/post_inst.htm#CHDBEJDA]APEX 3.0 Installation Guide for details.
APEX Listener is capable of hosting APEX 3.0 as well, though APEX 3.0 wasn't supported anymore when APEX Listener was initially released. The current APEX release at that time was 4.0, so this would be the first version to be known as really stable, whereas you won't get any support for older releases anymore. From personal experience I know that there are now issues with APEX 3.1 and APEX Listener, so it'll probably also work with 3.0.
Concerning your database release, the minimum for APEX Listener is 10.2.0.3, so you're definetly safe on that part, though I'd recommend to upgrade as regular support for 10.2 databases ended.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.This indicates that your APEX would actually be a 3.1 and you should update you images directory.
The APEX listener appears to be more than just a Java PL/SQL gateway.It is, but this has nothing to do with your 3.1 JS files, if this is why you stated this.
Is there a minimum version of APEX the APEX Listener supports?As mentioned above, 4.0 would be a safe approach, but 3.1 will definetly work, 3.0 probably will as well. I'd recommend you find out which APEX version is actually installed on your database before you consider any upgrade operations. Run the following query as privileged user:
SELECT comp_name, version, status
FROM dba_registry
WHERE comp_id = 'APEX';-Udo

WebServer 6.1 SP3 SSL reverse proxy to Sun One Application Server 7

I have an application in the appserver7 that requires SSL authentication. I have already installed a self cert in the appserver7, and the authentication works fine when I browse directly to the appserver.
The appserver7 has both listener for port 80 and 443 enabled.
I'm currently setting up a webserver (WebServer 6.1 SP3) to act as a reverse proxy to the appserver7. The reverse proxy for the basic jsp pages found in the appserver worked fine.
When I try to access the login page, in the appserver, in ssl mode, I am unable to do so. I then try changing the obj.conf to the following, from http to https:
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough"
Service fn="service-passthrough" method="(GET|HEAD|POST)" servers="https://172.2
8.48.53"
However, it still doesn't work.
Do I need to install a self cert in the webserver and enable the ssl listener as well?
Do I need to install any reverse proxy addon for the appserver? Any
setup for the obj.conf in the appserver?
Any ideas how to get this done?
Thanks.
Mac.

The Web Server 6.1 SP3 Reverse Proxy Plugin is supported, but it sounds like you're trying to do something that simply isn't possible.
If you want the Reverse Proxy Plugin to perform SSL mutual authentication with the Application Server using the client's certificate, that's impossible due to the nature of SSL mutual authentication. If the plugin could impersonate the client, then SSL would be vulnerable to MITM (Man In The Middle Attacks). Fortunately, SSL isn't vulnerable to such attacks because the plugin doesn't know the client's private key.
If you simply want the Reverse Proxy Plugin to pass information about the client's certificate along to the Application Server, that hapens automatically. There's nothing special to configure. Note that the plugin will not authenticate to the Application Server in this case. Rather, it will simply copy the X.509 certificate into the proprietary Proxy-auth-cert: HTTP request header.
The application running on the Application Server can inspect the Proxy-auth-cert: header using standard Servlet APIs. Alternatively, you can use Application Server 7's auth-passthrough AuthTrans SAF to cause the contents of the Proxy-auth-cert: header to be copied to the javax.servlet.request.X509Certificate Servlet attribute.

Installation of Oracle 11gR2 in suse 12.1

Hi,
I recently installed the the linux Open suse 12.1, I have only one os in my pc. Now i want to install Oracle, can any one help me how to install and what are the packages to install before installation of oracle and where can i get those package.
One more point is I am newly to the linux, I dont know anything about this linux, Just 2 days before i installed the os. Can any one help me for this query
Thanks and regards,
G.Manikanta

How many PC's and OS's do you have ;-) Installation of oracle 11gR2 in fedora 16
Supported OS versions are listed in the Install Doc - http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
If you insist on using an unsupported OS, you are on your own.
HTH
Srini

Oracle Client 11gR2 installation issue on RHEL v5.4 64-bit

Hi,
I am trying to install Oracle Client software 11gR2 on RHEL v5.4 64-bit. I have resolved all the libraries dependency as well as Kernel changes as suggested by the installer. The error in the log file is as attached. At present I have "skipped" this error and proceeded with installation.
While installing the client, the installer fails while configuring the Net CA with error:
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0xe5e97498, pid=27377, tid=4160075984
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c498]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid27377.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING: /home/oracle/app/oracle/product/11.2.0/client_1/bin/netca: line 178: 27377 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.ne
t.ca.NetCA $*
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
Also when I invoke the SQL Client; sqlplus user@db and enter the password, the sqlplus exits without any error and returns to the terminal console. Please note earlier I has getting a SELinux violation and have changed it to "permissive" mode
Please let me know how to resolve NetCA installation and the sqplus issue.
Thanks & regards,
Vinay

Hi,
Thet NetCA error occurs during installation and I believe the installer should take care of the ORACLE_HOME variable setting.
But before invoking sqlplus I have set the ORACLE_HOME and LD_LIBRARY_PATH setting in the .bash_profile as mentioned in the installation guide. The snippet of the profile file is:
export ORACLE_HOME=~/app/oracle/product/11.2.0/client_1
export JAVA_HOME=$ORACLE_HOME/jdk
export PATH=$ORACLE_HOME/bin:$JAVA_HOME/bin:$PATH;
export LD_LIBRARY_PATH=$ORACLE_HOME:$LD_LIBRARY_PATH
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TWO_TASK=mmcoedb
I am able to tnsping to the server/service name too but when I try to login using the user/password using sqlplus, it simply exits without any error.
Please let me know how to resolve the error.
Best regards,
Vinay

Webservies in OIMM 11gR2

Similar Messages

Maybe you are looking for