Website issue with osx server and hosting

so i had a website hosted from my osx server and i had bought the domain name from godaddy it worked great but i desided to instead of hosting it on my osx server to just host it on  godaddy so i turned to server off and added the domain to my godaddy account hosting and now it works but one problem all computers can veiw the website but mine. i think it has somthing to do with the fact that my mac was the one hosting it. but if i go to my browser and go to my wesite i get a error but than i go to any other computer and it works great help please

A couple ideas
check our /etc/hosts file, you might have an entry for your domain.
sudo pico /etc/hosts
     do you see any entries for your domain? If so:
     edit the file by navigating with the arrow keys, delete the line
     with your domain. Hit ctrl-x when done (enter 'y' to save the change)
Clear your DNS cache
     dscacheutil -flushcache
Try a different DNS server, go into your network settings (In System Preferences)
Go to Ethernet or Wifi (whichever you are using), click Advanced and under the DNS tab enter:
     8.8.8.8
Make sure no entries are ABOVE it.
If none of this works, send the results of these commands:
     cat /etc/hosts
     cat /etc/resolv.conf
     dig +short mydomain.com   (replace with your domain)
The results of these should point us in the right direction.
Jeff

Similar Messages

  • VPP Distribution issues with OSX Server Profile Manager

    Hi, I have a new issue with my OSX 10.9.5 Server. I use VPP to distribute apps to users devices, when I would add a new user I would send them an invitation message through /profilemanager . All was working well until recenetly , the message still arrives in the users mailbox however when you click the "sign in" link on the "receive apps and books from xxxxx" email instead of opening through the Mac App store app it now opens Safari and connects to the profile manager server , any ideas ? it never has done this before and although I thought it was a new feature or method I can not seem to resolve the issue.

    Hi if when you are redirected back to your Mac Server you enter the user name and password of the user you are trying to receive VPP apps for i.e the Open Directory credentials it will then open the App Store providing the credentials are correctly entered so it looks like an additional layer of security. The process is click on the link in the VPP invite email, this takes you to your Mac Server profile manager, log on with your OD account, App store then opens on your Mac like it used to.

  • Accessing time capsule with osx server and vpn

    i have apple server and a time capsule that i use as harddisk. Now I want to access the time capsule by VPN. I cannot make an accesspoint of my time capsule.
    When I turn off file sharing on the time capsule and turn it on on the server then i cannot access my files locally.

    Sorry, have to disagree.
    I have a time capusle and its in the hfs+ and my vista pc reads it fine.
    You do need to download the airport software for windows from apple downloads. Install that and then, windows can see it fine under networking. Then to map a drive letter, just navigate to your time capsule in windows then right click on the share and give it a drive letter.
    Or you can use the cd that came with your time capsule in your windows pc and it will install the client from there.

  • Need help with OSx server and profile manager

    I messed up my OS X server and seems like it has stopped working.
    I cannot access my server remotely or locally and it shows Safari cannot connect to server.
    I made mistake resetting keychain to default and all certificates were missing.I restored system.keychain from time machine but not it won't run.
    System log shows
    ec 30 18:31:25 mdmserver.medicalpharmacies.com certadmin[14697]: BundleManager(non-plugin calling servermgr_certs): doCommand finished reply = {
         error = <62706c69 73743030 d4010203 04050625 26582476 65727369 6f6e5824 6f626a65 63747359 24617263 68697665 72542474 6f701200 0186a0a8 07081112 1a1b1c22 55246e75 6c6cd409 0a0b0c0d 0e0f1056 4e53436f 64655a4e 53557365 72496e66 6f584e53 446f6d61 696e5624 636c6173 7311138a 80038002 80075f10 19636f6d 2e617070 6c652e73 65727665 726d6772 5f636572 7473d313 140c1517 19574e53 2e6b6579 735a4e53 2e6f626a 65637473 a1168004 a1188005 80065f10 164e534c 6f63616c 697a6564 44657363 72697074 696f6e5f 1032556e 61626c65 20746f20 66696e64 20706173 73706872 61736520 666f7220 6578706f 72746564 20707269 76617465 206b6579 d21d1e1f 205a2463 6c617373 6e616d65 5824636c 61737365 735c4e53 44696374 696f6e61 7279a21f 21584e53 4f626a65 6374d21d 1e232457 4e534572 726f72a2 23215f10 0f4e534b 65796564 41726368 69766572 d1272854 726f6f74 80010008 0011001a 0023002d 00320037 00400046 004f0056 0061006a 00710074 00760078 007a0096 009d00a5 00b000b2 00b400b6 00b800ba 00d30108 010d0118 0121012e 0131013a 013f0147 014a015c 015f0164 00000000 00000201 00000000 00000029 00000000 00000000 00000000 00000166>;
         errorCode = 5002;
         errorDescription = "Unable to find passphrase for exported private key";
    Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd[14695]): Service exited with abnormal code: 1
    Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd): Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

    Hi!
    Do you have a time machine backup? What you can try to do is a full restore on a testmachine or a VM and export the old keychain and import it into your broken server:
    Passwords:
    http://www.icreatemagazine.com/tips/os-x-tutorial-how-to-transfer-keychain-data- between-macs/
    Certs:
    https://www.racf.bnl.gov/docs/howto/grid/osxcertmgmt
    Good luck!

  • New AEBS with OSX Server and Xserve

    Ok this may seem like a silly question, but here it goes. I want to have my AEBS hooked to my cable modem, but not handling NAT or DHCP(passthrough?). This would be handled by the Xserve. I tried to turn off both of both, but the current AEBS won't allow me to specify a default host with these turned off. Does this work with the new AEBS or should I just buy a Netgear. It seem much easier to assign an ip adress to the router and set the dmz server up. thanks much

    ...but the current AEBS won't allow me to specify a default host with these turned off.
    That is because a default host makes no sense with those turned off. If they are turned off, every machine on the LAN (and wireless) side are directly connected to the Internet (WAN port). There is no need for default host.

  • TCP Connection Issues with OPC Server and GE Versamax

    Hi there,
    I have an installation of Lookout 6.0 coupled with the OPC Inductrial Automation servers.  In my application, we are running two instances of the GE Versamaz Ethernet driver to communicate with two remote (over the internet) GE Fanuc Versamax PLCS.
    Every few days, the two PLCs lose connectivity.  It does not appear to be a LAN connectivity issue as I can still log into the PLCs using the GE software.  To fix the issue, the Lookout software must be restarted.
    Has this been seen by anybody else?  This poses a significant problem as lookout is used to monitor the PLCS at sewage stations - each time the connections are lost we have to deploy technicians to the sites to ensure all is working.
    -andrew

    Hello Andrew,
                           When the connection is terminated are you getting any errors or alarms? If so what are they? Also you can try to replace the object that is connected to the PLC and make sure it has the correct settings. It may also be due intermittent networking issues, losing connection and not able to connect with the object again unless Lookout is restarted again. I have not heard about any such networking issues. The attached document can be used for reference.
    Regards,
    RMM
    http://digital.ni.com/public.nsf/websearch/5ECD2AFA039B45C186256B1300621722?OpenDocument

  • Compatibility issue with outgoing server; they suggest downloading Thunderbird.  Any suggestions?

    My internet provider says there is a compatibility issue with outgoing server and suggest downloading Thunderbird.   Any comments?

    Not without some details from you.
    What version of OSX
    Who is the mail provider
    If not iCloud mail what type is it (POP or Imap)
    That's a start.

  • Is SSL and multiple websites possible with Lion Server?

    this is the obligatory apology from a nub here....
    I have not been a sys admin since the days of NT 4.0.
    I like to think that "hey, i might need a touch up here and there, but I think I can find my way around..."  Wrong.
    I have been searching, and reading and searching and reading, and trying everything I can think of..  and I CAN NOT figure out how to get mutliple websites working with Lion Server, using self signed certs 1 for each of my subdomains.
    Has anyone, anywhere (thank you google for returning searches to me from 2004?!?!  More puzzled confusion....)  posted a step by step guide yet??? 
    I have a mac mini, and I have two domain names that are resolving to my exterinal interface on my router just fine, and I have tried what I thought was
    every different possible combination of voodoo, magic, 00000...MoreTestingNeeded.conf, and all the other tricks.
    Is it possible to get ssl and multiple websites working with one IP address? 
    Thanks...

    Thank you very much for your time and input.  My birthday was fantastic! Thanks for asking.
    I found out about SNI while researching an error I was getting in the log.  I really never found any definitive "this is what you need to do", so I was going to get back to it later.
    You probably know this, but Lion Server breaks out all of the virtual hosts into seperate documents in the "sites" directory.   All I do is I launch the server.app, and in the web component, I enter the name of the website that I want to resolve to my server, and I give it the path to the docs.  Thats it.  There is no DNS configuration to speak of, on my part, and I don't believe that its necessary (?) to touch the httpd.conf file at this point yet either, even though I think I hear others saying you do.  (I have no issues with getting into the file and making any changes, I just thought it was interesting.)
    I am still trying to figure out how a user is supposed to add any other types of services LIKE ftp, etc.  I know and use the server admin tools, but I have found that the app really does do its job in terms of creating all the dns records for resolving the sites you create.  I sure hope its not just using the host file, is it? I never see any additional files in the DNS manager, for any of the subdomains.  Where are they?
    Here is the contents of what appears to be the first file read, that is for SSL enabled sites:
    ``````````````````````````````````````````````````````````````````
    This is "0000_any_443.conf:"
    `````````````````````````````````````````````````````````````````
    ## Default Virtual Host Configuration
    NameVIrtualHost *:443
    <VirtualHost *:443>
      ServerAdmin [email protected]
      DocumentRoot "/path/to/the/docs"
      DirectoryIndex index.html index.php /wiki/ default.html
      CustomLog "//log" cmbndvhst
      ErrorLog "/"
      <IfModule mod_ssl.c>
      SSLEngine On
      SSLCipherSuite "SOMEGARBAGEIDONTKNOWIFISHOULDSHAREORWHAT"
      SSLProtocol -ALL +SSLv3 +TLSv1
      SSLProxyEngine On
      SSLCertificateFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
      SSLCertificateKeyFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
      SSLCertificateChainFile "/path/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
      SSLProxyProtocol -ALL +SSLv3 +TLSv1
      </IfModule>
      <Directory "/Path/To/The/Docs/XXXX/SDFSDD">
      Options All +MultiViews -ExecCGI -Indexes
      AllowOverride None
      <IfModule mod_dav.c>
      DAV Off
      </IfModule>
      </Directory>
      Include /httpd_passwordreset_required.conf
    </VirtualHost>
    ```````````````````````````````````````````````````````````````````````````````` `````````````
    So..  my questions are:
    Where in the .confs do I add what I need from your above items?  Would it go each of the site docs that I need?  I am really not sure what apple is doing here.
    I have 4 domain names resolving to my server right now, and subdomains to each of the domains.  So there are a total of about 10 "site" docs, not a big deal to change each, I just wonder if Lion overwrites these docs with each refresh or what? Also, If I try to add a third .com right now it breaks the whole site.
    (Out of conversation, but I just remembered this.  I just had to "quit" out of the server.app.)  When installing the directory server,  it hangs on "getting certificates". The spinning wheel (not the rainbow collered one, but the black one by the words "Getting Certificates") just sits there and spins.  I finally just hit the red X and relaunch server.
    Lastly, you meniton importing the key.  I am using the key manager within the server app.  I am not sure where and how I would make the cert and key you are referring to for the importing?  I have tried to use the key manager in the OS, but I am not sure of the relationship between that key manager app, and the key manager within the server.app.  I have tried to create certs in the keymanager in the OS side, but I do not know how to get them to show up for use in the keymanager in the server.app.
    BTW: Thanks.   Thanks for the help.  I really appreciate it.

  • Pop/Imap retrieving and redistribute in LAN with OsX Server

    It's possible to download mail accounts hosted in my isp and redistribut'em in my lan with OsX Server with it's own mail server?
    The scope is not to have a local server mail because we have ADSL and sometimes the line broke up...
    We prefere have mail hosted more securely in our external isp.
    But an internal mail server is a commodity very useful...
    Sorry if the questions is answered before...
    Thanks in advance.

    Maybe not easy but should work:
    http://www.macosxhints.com/article.php?story=2002052509542613
    man fetchmail

  • Issue with Information broadcasting and pre-cal server in SAP BI

    Hi Experts,
    I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
    I have 20 employees every month I need to send workbook via e-mail from information broadcasting.  The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
    because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
    I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
    like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
    Below log In pulled from pre-cal server
    Can you please tell what could be the problem.
    Successful job
    3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
    3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
    3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
    3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in  thread 3
    3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
    3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
    IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:44 AM (0) -> Excel based operations  finished.
    Failure job
    3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
    3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    .xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
    3/10/2011 10:23:44 AM (1) -> PID of Excel process:  "2544"
    3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
    3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
    3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
    BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
    3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    Thanks in advance
    Narendra

    Hi Ravikanth,
    Thank you very much for the reply
    I went into RSPRECADMIN and clicked on 'Display Current Queue'.  There we have 3 sections
    1) Queue Overview of Open Precalculations
    I can see this section is always blank after running IB also
    2) Queue Overview of Current Precalculations
    In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
    If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
    Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
    3) Queue Overview of Proccessed Error-Free Precalculations
    All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
    I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
    Can you please help me further to trace the error.
    Thank you
    Narendra

  • Memory leak issue with link server between SQL Server 2012 and Oracle

    Hi,
    We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue.  For more context please refer to the link.
    http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
    The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012.  I could not find any article that talks about if this issue was fixed by Microsoft in later version.
    We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
    Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
    We wanted to know if this fixed in SQL Server 2012 ?

    So your question is more of a information type or are you really facing OOM issue.
    There can be two things for OOM
    1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
    2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used.  Did you made sure that you are using latest version.
    What is Oracle version you are trying to connect(9i,10g, R2...)
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Help with OSX server mail setup

    Please if anyone can tell me what I am doing wrong, I would be very grateful.  I have a company with an externaly hosted website and an an internally hosted email (OSX server).  I have everything kind of working, but some things don't seem quite right.  I'll explain below:
    I have a purchased domain: mycompany.com hosted by godaddy.
    I am using Godaddy name servers: ns65.domaincontrol.com and ns66.domaincontrol.com
    The external godaddy DNS has an a name entry for my mail server: mail pointing to 123.123.123.123 (which is my companies external static IP address).
    There is also a null (@) a name record for my website hosting service (squarespace) pointing to 456.456.456.456
    There is a cName record www pointing to the squarespace domain "www.squarespace6.com"  (know this is unusual, but it is how squarespace asks this to be set up and does not work otherwise)
    There is an MX record with priority 10 and host name @ pointing to mail.mycompany.com
    I have a airport extreme router with the appropriate ports forwarded to the OSX server.
    The DNS servers on the router are pointed to the internal IP address of the OSX server
    I did not change the domain name on the router (mistake?) it is currently san.rr.com
    On the OSX server I have set up host name to be mycompany.comDNS is set up with primary zone being mycompany.com
    Primary Zone entries include
    nameserver = mycompany.com
    machine record host name is mycompany.com and the IP address is the internal IP address of the OSX server
    another machine record with host name "mail" and IP address is the internal IP address of the OSX server.
    Finally, there is a mail exchanger record with mail server "mail.mycompany.com" and priority 10
    There are 2 entries autocreated in the Reverse zone
    Mail is setup and running on the OSX server providing mail for "mail.mycompany.com"
    Users are setup with email address: [email protected] (note: without the mail subdomain - I think this is OK?)
    I am using self signed certificate.
    In my clients (windows Thunderbird, Mac Mail, iOS mail), the settings are for the incoming mail server host name to be "mail.mycompany.com" and the outgoing also to be "mail.mycompany.com"
    I woud have expected this to be imap.mycompany.com and smtp.mycompany.com respectively, but it doesn't work when I input these values and works with the former.  Have I set this up wrong??  imap seems to require SSL on port 993 and SMTP seems to require TLS on port 587.Outlook on PC gives me an error that after googling appears to be a problem with not recognizing a fuly qualified hostname form the SMTP client.  I see the fix, but wanted to know if that meant that my server didn't have a fully qualified host name and whether I should change that rather than just remove that restriction???
    The final problem is that my outgoing emails seem to be getting caught up in other people's spam filters too frequently.  What is the main reason for this?  Is it because I have set something up wrong and it brings up flags or is it simply because I am not a huge hosting company, or somethign else althogether?
    If you've gotten this far, big thanks!  If you can help me, even more thanks!

    Well, actually they are both getting caught up in spam filters and bounced back.  I actually realized that part of the problem is that I have a dynamic IP address, but it doesn't change.  Regardless, on the bounce back it looks like hotmail and other domains are rejecting email from my IP and recognize it as dynamic.  This was a test server that i would by physically taking to my business where there is a static business IP address (Cox).
    Sorry for the very long original message, but it seems that most people don't post enough information for the problem to be solved in their original posts and I was hoping to provide as much detail as possible.
    The other is the question of "are things set up right?"  It seems strange to me that both my outgoing and incoming servers are "mail.mycompany.com" and not imap.mycompany.com and smtp.mycompany.com and I wonder if this is going to cause me to have problems?
    Is it a problem that my email addresses are [email protected] and not [email protected]?
    Was I supposed to change the domain name on the router?
    Also is it going to be a problem that I am using a self signed certificate?

  • Issues with Exchange Account and Q10

    Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
    The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
    At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
    I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
    Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
    Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
    So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
    Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
    Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
    Model: SQN100-2
    OS Release: 10.1.0.2011
    OS Version: 10.1.0.2038
    Build ID: 525050
    Ian

    To follow-up with this issue:
    I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
    I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
    I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
    Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
    Ian

  • Mac Mini with OSX server still OK?

    HI All,
    I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
    We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
    Any ideas would be much appreciated.
    Thanks,

    Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
    You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
    Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
    Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
    Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
    Goodluck!
    Jeffrey

  • Help needed with OSX Server 10.5.8

    We're running a headless Xserve (RackMac3,1) with OSX Server 10.5.8 that did its job flawlessly.
    Now we want to update the Perl software from 5.8.6 to 5.20.0 or newer. After downloading the suitable version from CPAN we tried to install, but get the following msg:
    Uh-oh, the C compiler 'cc' doesn't seem to be working.
    You need to find a working C compiler.
    Either (purchase and) install the C compiler supplied by your OS vendor,
    or for a free C compiler try http://gcc.gnu.org/
    I cannot continue any further, aborting.
    Is there a way to install the missing tools remotely via the command line (SSH)? A step-by-step recipe would be most welcome.
    - Harald -

    RackMac3,1 is PPC/G5 processor so you are not going to have an easy time with this. Perl 5.2.20 is bleeding edge (OS X 10.10.3 comes with v5.16.3).
    I would leave Apple's installation of Perl, etc. on the server strictly alone and install MacPorts:
         The MacPorts Project -- Home
    and work from there. You aren't likely to get a step-by-step recipe because its not an exercise a rational person would chose to spend time on.
    Have you considered rewriting whatever features in your code require Perl 5.2.20 than to upgrade your server? Or buy a new server, you could probably pick up a Mini for about $200.
    C.

Maybe you are looking for