Websites which has smooth scrolling with 3.6.15 are now jerky. IE8 is ok on these sites. (ex: ebay)

Acts as if my machine is too slow or does not have enough memory but all was fine in Firefox 3.6.15 and still is in IE8. Very annoying trait.

See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Similar Messages

I have a website that has a scrolling marquee which i assume uses java and because you have blocked java it wont work when viewing, is there a way around this?

I have a website that has a scrolling marquee at bottom of the page with vital information for viewers of the site, this works fine on internet explorer but not firefox, I assume its because you have blocked Java? Is there a way of solving this problem?

To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
Marquee requires JavaScript to be enabled.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Who can tell me the website which has some oracle client_si

I have read from here there is a website which has some
client_side program of oracle on linux, but i forgot the address,
who can tell me? (something like sqlplus under x, etc)
null

sander (guest) wrote:
: tianhuimin (guest) wrote:
: : I have read from here there is a website which has some
: : client_side program of oracle on linux, but i forgot the
: address,
: : who can tell me? (something like sqlplus under x, etc)
: Hi,
: On linuxberg.com in the X11 | database section you'll find a
: tablebrowser and sessionmonitor for oracle (based on Qt lib).
: I far as i know there no sqlplus for x, although i don't know
: what you mean excactly....
: btw. i've tried to install SQLplus for W95 on W98 -> no go
You have to upgrade your SQL*NET 8 Client to 8.0.4.3 (80403.exe)
The patch is avalable somewhere on the oracle web. If you don't
find it, send me a email and I'll send it
: Do you have any experience with this?
: Regards,
: Sander
null

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have never seen this before. Try using these installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Unity Connection 1.2(1) which has SCCP ports with CallManager 8.5(1)SU1.

For 24 hours I’d like to run Unity Connection 1.2(1) which has SCCP ports with CallManager 8.5(1). Unity Connection 1.2 isn’t supported anymore, we are migrating to Unity Connection 8.5(1) but I wanted to do CallManager 4x to 8x upgrade the first night, and Unity Connection 1.2 to 8.5 upgrade the second night. All new hardware so using DMA and COBRAS.
I'm not looking for it to be "Supported" just want it to work 24 hours while migrating...
Unity Connection 1.x Compatability Matrix will likely never show CallManager 8.5 since UC 1.x is EoL
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
Jason Aarons
CCNP/CCDP/CCVP
Consultant

The primary factor in the integration here for SCCP is the TSP version. You can verify the version of TSP running on Unity Connection with the procedure noted here: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/1x/release/notes/121sr2ucrn.html#wp37944
It's a Windows box so the procedure is the same as with standard Unity. Check the properties of AvSkinny.tsp in the \Windows\System32\ folder path.
If you don't care about official support and it's only temporary then I'd say check to ensure that TSP is fairly recent and, if needed, upgrade to the latest release available for install on CUC 1.2(1). Run a number and tests and make sure 1) things function as expected and 2) you don't get a load of TSP errors in the system/application logs.
Cisco notes that product support is based primarily on testing and since Unity Connection 1.2(1) is outdated and CUCM 8.5(1) is brand new, it's not likely that this combination will be tested anytime soon ... but the TSP compatibility between 8.0 and 8.5 is likely to be similar if not the same.
Hailey
Please rate helpful posts!

I share an Apple ID with someone but we are now on iOS8 and getting each others messages on our iphones and ipad. How can I split the account safely as well as protect icloud backed up data?

I share an Apple ID with someone but we are now on iOS8 and getting each others messages on our iphones and ipad. How can I split the account safely as well as protect icloud backed up data?

Use different Apple IDs for iMessage (and also FaceTime) to avoid getting each others text messages (and FaceTime calls). One of you should go to Settings>Messages>Send & Receive (and Settings>FaceTime), tap the ID, sign out, then sign back in with a different ID. You can continue to shared the same ID for the iTunes store and other services.

How can I get back the two button smooth scroll with Logitec optical marble mouse since Adobe Acrobat or FireFox updates on 10/26/2010 made it quit?

Oct 25, 26 or 27 both Adobe Acrobat and Mozilla Firefox alerted me they had updates to install. Since I trust them both I installed them. However, since then my optical marble mouse from Logitech acted strangely different. The cursor did not move as usual. It didn't respond right. I thought it might have needed the dust wiped out, so I did that. It still acted sluggish when I tried to move it, it was as though it was "spinning its wheels" not going anywhere. I went to the Control Panel clicked on Mouse, and proceeded to look at the settings and set them to default. I then tried to use the universal scroll by clicking the two big buttons which showed a circle with cross hair arrows as usual. When the marble was moved forward or backward, the scroll had always been smooth allowing one to read the screen evenly and without holding any button down. Now it was jerky. Is this a problem from the last update? My version of Firefox is 3.6.12
Thank you

I am happy to see another person is having this jerky scroll situation with the latest update to Firefox on October 27. I did check my I.E browser and '''THAT BROWSER''' still does the nice smooth scroll....let's get 'er fixed Mozilla! I know you can!

Screen smooth scrolling with mouse wheel

I have a screen with a number of vertical sections that are initially all collapsed. After expending these sections the screen becomes too tall and I get a scroll bar on the right. Scrolling it by dragging a scroll bar has expected smooth scrolling but using the mouse wheel scrolls why too large portion of the screen.
Any idea what to look for?
Thanks

No, I do not have other parts installed. I saw this behavior by others last week in the Safari forum here at Apple too. They wrote about this could be happend by using fast user switching and only Safari 4 was effected. But now, as I saw this after upgrading to Safari 4.0.2 in Aperture too, there should be a biger bug elsewere in the System or maybe Webkit?

How to make SMOOTH scrolling with Jtable in Swing automatically ?

Hi All,
I'm coding for a price board program, with all records I designed a table for them. So now I want to scroll automatically for all records on that table for customers viewing them. The problem that I can make it scroll smoothly ! Currently I use this block code :
Thread scollTable;
int scrollCount = 38;
public void scrollTable(final int records) {
if (scollTable == null) {
scollTable = new Thread() {
@Override
public void run() {
try {
while (true) {
if (scrollCount == 38) {
jTable1.setRowSelectionInterval(scrollCount, scrollCount);
scrollRowToVisible(scrollCount, jTable1);
Thread.sleep(4000);
jTable1.setRowSelectionInterval(scrollCount, scrollCount);
scrollRowToVisible(scrollCount, jTable1);
Thread.sleep(1000);
scrollCount++;
if (scrollCount == records) {
scrollCount = 0;
Thread.sleep(4000);
jTable1.setRowSelectionInterval(scrollCount, scrollCount);
scrollRowToVisible(scrollCount, jTable1);
scrollCount = 38;
continue;
} catch(Exception ex) {
if (!scollTable.isAlive()) {
//scollTable.setPriority(7);
scollTable.start();
public void scrollRowToVisible(int row, JTable table) {
Rectangle cellRect = table.getCellRect(row, 0, true);
Rectangle visibleRect = table.getVisibleRect();
cellRect.x = visibleRect.x;
cellRect.width = visibleRect.width;
table.scrollRectToVisible(cellRect);
The problem I think the progam can not run smoothly with scroll :
scrollRowToVisible(scrollCount, jTable1);
Thread.sleep(1000);
scrollCount++;
Any helps,
Thanks.
Edited by: onlysang2004 on Aug 4, 2009 2:22 AM

Could you please tell me more detail ? I studied about Swing recently ! I found a link for that javax.swing.Timer : http://forums.sun.com/thread.jspa?threadID=5366085&messageID=10603235#10603235 but how can I use ? In my price board screem doesn't have ActionListener object or button to listen to submit. Can I create an ActionListener object ? Please help me more, how to run smooth scrolling automatically !
public class ViewElectricHaSTC extends JFrame {
Thread scollTable;
public ViewElectricHaSTC(Options options) throws Exception {
scrollTable(options.getRecord());
int scrollCount = 38;
public void scrollTable(final int records) {
if (scollTable == null) {
scollTable = new Thread() {
@Override
public void run() {
try {
while (true) {
if (scrollCount == 38) {
//jTable1 created with initComponents method
jTable1.setRowSelectionInterval(scrollCount, scrollCount);
scrollRowToVisible(scrollCount, jTable1);
Thread.sleep(4000);
jTable1.setRowSelectionInterval(scrollCount, scrollCount);
scrollRowToVisible(scrollCount, jTable1);
Thread.sleep(1000);
scrollCount++;
if (scrollCount == records) {
scrollCount = 0;
Thread.sleep(4000);
jTable1.setRowSelectionInterval(scrollCount, scrollCount);
scrollRowToVisible(scrollCount, jTable1);
scrollCount = 38;
continue;
} catch(Exception ex) {
if (!scollTable.isAlive()) {
//scollTable.setPriority(7);
scollTable.start();
public void scrollRowToVisible(int row, JTable table) {
Rectangle cellRect = table.getCellRect(row, 0, true);
Rectangle visibleRect = table.getVisibleRect();
cellRect.x = visibleRect.x;
cellRect.width = visibleRect.width;
table.scrollRectToVisible(cellRect);
Edited by: onlysang2004 on Aug 4, 2009 7:23 PM

Safari 7 (mavericks) vs google chrome any recomendations ? it seems like safari has smoother scrolling

Safari 7 (mavericks) vs google chrome any recomendations ? it seems like safari has smoother scrolling

Both. Always good to have two browsers installed. If one browser isn't functioning as it should, you have the other browser installed to use for troubleshooting.
I use both. I don't see any difference in scrolling.

Smooth scrolling with macbook touchpad

I've noted recently that, when using both the synaptics and mtrack touchpad drivers, two-finger scrolling moves in small increments, as with a mouse wheel, rather than in one continuous motion like in Mac OS X (where page movement follows finger movement more closely). Is it possible to use the latter behavior rather than emulate a physical mouse wheel?

I have a Macbook 11,1, the new 13" Retina. I'm currently running the mtrack driver, but synaptics experiences the same issue. My 10-mtrack.conf is as follows:
Section "InputClass"
MatchIsTouchpad "on"
Identifier "Touchpads"
Driver "mtrack"
Option "Sensitivity" "0.6"
Option "ButtonIntegrated" "true"
Option "ButtonMoveEmulate" "true"
Option "Sensitivity" "0.7"
Option "ClickFinger1" "1"
Option "ClickFinger2" "2"
Option "ClickFinger3" "3"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
#Option "TapButton1" "0"
#Option "TapButton2" "0"
#Option "TapButton3" "0"
Option "ThumbSize" "35"
Option "PalmSize" "55"
Option "DisableOnPalm" "true"
Option "IgnorePalm" "true"
Option "ClickTime" "25"
Option "ScrollDistance" "60"
Option "ScrollUpButton" "5"O
Option "ScrollDownButton" "4"
Option "ScrollLeftButton" "7"
Option "ScrollRightButton" "6"
EndSection
I'll try the edge scroll and see what happens.
EDIT: A fresh synaptics config sort of gives me smooth scrolling. Aha, I can still see the increments if I scroll slowly, but they're much less noticeable. I could work with that. However, synaptics does not (as far as I know) have the capability to ignore my thumb resting on the bottom of the trackpad, causing unwanted clicks. Can I get that functionality in synaptics?
Last edited by DrKillPatient (2013-11-18 22:24:37)

Why has page scrolling with touchpad stopped after upgrade?

I use an Acer Aspire 7540 laptop. Page scrolling with the touch bar seems to have stopped after I upgraded to the latest version of Firefox.

http://www.bulletsandbones.com/GB/GBFAQ.html#scrolltimeline
(Let the page FULLY load. The link to your answer is at the top of your screen)

How do I add a form which has a scroll bar in PDF?

Hi
I would like a form to be added into PDF, however, the form is too long to be put in one page. There are also other stuff in the right hand side, so I wish the form has a scroll bar for the user to drag and browse, just like a web page scroll bar. Is it possible that Acrobat 3D8 support such function?
Thanks!!!!

Hi Kentyang,
This is a 3D specific forum - maybe place this request in the Acro Script forum at http://www.adobeforums.com/cgi-bin/webx?14@@.3bb55d70
Cheers
Gazzz

Websites which has smooth scrolling with 3.6.15 are now jerky. IE8 is ok on these sites. (ex: ebay)

Similar Messages

Maybe you are looking for