WebStart Unable to load resource/ZipException
Hello,
I am trying to get webStart to work and cannot seem to get around the following issue:
Upon clicking my go.jnlp file in Firefox, the "Java Loading" screen appears and then the webstart reports a download error.
The errors are:
Exception
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://www.otomotion.org/test/frame.jar
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Wrapped Exception
java.util.zip.ZipException: ZIP file must have at least one entry
at java.util.zip.ZipOutputStream.finish(Unknown Source)
at java.util.zip.DeflaterOutputStream.close(Unknown Source)
at java.util.zip.ZipOutputStream.close(Unknown Source)
at com.sun.deploy.net.HttpDownloadHelper.download(Unknown Source)
at com.sun.deploy.cache.Cache.downloadResourceToCache(Unknown Source)
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
I've tried quite a few different things (recompiling/jaring on other platform), I've tried different browsers on differents OS'. My jar file is signed.
Here is my jnlp file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.5+" codebase="http://www.otomotion.org/test ">
<information>
<title>Broken</title>
<vendor>otomotion</vendor>
<homepage href="www.otomotion.org"/>
<description>Webstart Swing Test</description>
</information>
<offline-allowed/>
<resources>
<j2se version="1.5+" java-vm-args="-esa -Xnoclassgc"/>
<jar href="frame.jar" />
</resources>
<application-desc>
<argument>otomotion.org</argument>
</application-desc>
</jnlp>My code (simple enough)
import javax.swing.*;
import java.awt.*;
public class rFrame extends JPanel {
public rFrame() {
super(new BorderLayout());
JLabel hw = new JLabel("Hello World!");
this.setPreferredSize(new Dimension(400,400));
this.add(hw,BorderLayout.CENTER);
private void createAndShowGui() {
//Create and set up the window.
JFrame frame = new JFrame("Test Frame");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
frame.setContentPane(this);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
new rFrame().createAndShowGui();
}Thank you for your help.
Files are available at www.otomotion.org/test
.. I can
download the jar and run it locally.I tried running it locally, and it worked for me as well,
so I took a closer look at the Wrapped Exception
in the console and noted it mentioned ..
java.util.zip.ZipException: ZIP file must have at least one entryOK.. so I checked it using ..
jar -t frame.jar..the console just sat there doing nothing!
When I opened it using WinZip, I could see the
class, manifest and RSA/SF files, but WinZip will
handle any old junk, so that does not really help
us.
I suggest you generate the jar fresh, and check it
using the 'jar -t' command (if Jar cannot understand
it alright, I expect JWS won't either - perhaps when
'launching the jar' from the file system, such checks
are unnecessary).
The only two other things I have noted that were
'suspicious' were the lack of href attribute in the
jnlp element, and the fact that I am sometimes
getting slightly different URL's quoted (by the server)
for the address of the jar file.
Similar Messages
-
Unable to load resource: Web Start
I have a server called BIServer running on mds9021.sas-frontiers.com. Using jboss. And there is a database called dictionary also running on that machine. Both are up. Then I have a person that started up Web Start and is trying to connect to the mds9021.sas-frontiers.com. machine. But I get the following error.
An error occured while launching/running the application.
Title: jhfkskas
Vendor: sdjkfhjksdhfk
Category: Download Error
Unable to load resource: http://mds9021.sas-frontiers.com/webstart/...jretriever.jnlp
If anybody knows what this means please let me know.
ThanxThank you for the advise. But I got it sorted. The problem was jre related. The links got mixed up one way or the other and was using the wrong jre version.
-
FailedDownloadException: Unable to load resource
I'm having a problem where only a certain class of users (Ubuntu Jaunty) get an exception when trying to run my webstart app. They are presented with the following error:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: https://host/chatterbox/xmltalk.jnlp
at com.sun.deploy.net.DownloadEngine.actionDownload(DownloadEngine.java:1325)users java environment:
$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03)
Java HotSpot(TM) Client VM (build 11.3-b02, mixed mode, sharing)JNLP file is as follows:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0+"
codebase="https://host/chatterbox"
href="xmltalk.jnlp">
<information>
<title>chatterbox</title>
<vendor>chatterbox</vendor>
<homepage href="." />
<description>Chatterbox News Reader</description>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.4+" href="http://java.sun.com/products/autodl/j2se"/>
<jar href="xmltalk.jar" main="true" download="eager"/>
<jar href="lib/commons-logging-1.1.jar" download="eager"/>
<jar href="lib/ws-commons-util-1.0.2.jar" download="eager"/>
<jar href="lib/xmlrpc-client-3.1.1.jar" download="eager"/>
<jar href="lib/xmlrpc-common-3.1.1.jar" download="eager"/>
<extension name="Bouncy Castle Security" href="bcprov.jnlp" />
</resources>
<application-desc main-class="XmlTalk" />
</jnlp>any help would be much appreciated.Use wireshark or any other http sniffer to find out what your server returns.
From the log it seems that java is not getting well formed header at least (mime type is wrong, size missing, date is weird):
network: Sever response: (length: -1, lastModified: Wed Dec 31 16:00:00 PST 1969, downloadVersion: null, mimeType: text/html)May be the way you download it from direct link is different (e.g. your server is sensitive to browser's user agent string?). -
Unable to load resource - error
This is my first attempt at using java web start. I'm using JDeveloper to generate my jnlp which I've included below.
However I get the following error which I cannot see a solution for. I'm sure there must be a simple solution.
The exception is:
JNLPException[category: Download Error : Exception: java.net.ConnectException: Connection refused: connect : LaunchDesc: null ]
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
<?xml version = '1.0' encoding = 'windows-1252'?>
<jnlp spec="1.0+" codebase="http://my ip address was here:8988" href="/RichMon-RichMonV15-context-root/test.jnlp">
<information>
<title>testing deployment of RichMon</title>
<vendor>just testing</vendor>
<homepage href="test.html"/>
<description>more testing</description>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.4+"/>
<jar href="/RichMon-RichMonV15-context-root/apps/RichMonV1504.jar" main="true" download="eager"/>
</resources>
<application-desc main-class="RichMon.RichMonitor"/>
</jnlp>
Any help is much appreciated.
Thanks,
RichardHi Udo,
I just did what that URL advised...but still getting the same error ?
An error occurred while launching/running the application.
Title: Integration Builder
Vendor: SAP AG
Category: Download Error
Unable to load resource: http://in-ccuapp003:50000/rep/repository/aii_ibrep_client.jar
Kindly help....
Thanks -
Getting JNLP error: "exception: Unable to load resource:-"
I've posted this question in Stackoverflow... but didn't get any answer...
Hi Guys,
I'm brand new to JNLP.
I've been trying to fix this for straight 2 days... I have no clue...
I've a dynamic web project in eclipse. And I wanted to append an Applet in html. It works fine, if I append it without using jnlp. But if I use jnlp, its throws exception...
Please help me....
Here is my package structure:
DaaS
DaaS\WebContent
\WebContent\AppletToJS.html
\WebContent\appletToJS.jnlp
\WebContent\FirstApplet.jar
"FirstApplet.jar" contains the Applet class - AppletToJS.java
Here is my `jnlp` file:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp href="appletToJS.jnlp">
<information>
<title>Dynamic Tree Demo</title>
<vendor>Dynamic Team</vendor>
</information>
<resources>
<!-- Application Resources -->
<j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" />
<jar href="FirstApplet.jar" main="true" />
</resources>
<applet-desc
name="Applet To JS"
main-class="acid.AppletToJS"
width="300"
height="300">
</applet-desc>
<update check="background"/>
</jnlp>
Here is my `html` file:
<html lang="en-US">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<body>
<script src="http://www.java.com/js/deployJava.js"></script>
<script>
var attributes = { code:"acid.AppletToJS", width:100, height:100} ;
var parameters = {jnlp_href: "appletToJS.jnlp"} ;
deployJava.runApplet(attributes, parameters, "1.6");
</script>
<!-- <applet codebase="./jars" archive="FirstApplet.jar" Code="acid.appletToJS.class" width=200 Height=100></applet> -->
<p id="summary"/>
</body>
</html>
while I run my html page I got following error:
<code>
exception: Unable to load resource: http://localhost:8080/jars/FirstApplet.jar.
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost:8080/jars/FirstApplet.jar
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload$DownloadTask.call(Unknown Source)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by:
java.io.FileNotFoundException: http://localhost:8080/jars/FirstApplet.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload$DownloadTask.call(Unknown Source)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Exception: com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost:8080/jars/FirstApplet.jar
</code>
**http://localhost:8080/jars/FirstApplet.jar**
- I really don't understand where the hell "/jars" coming from???
- My project name is "DaaS" and my jar, html page and jnlp page are in same directory. And I'm running my html page on tomcat-7 server.
Edited by: user1202074 on Feb 7, 2012 4:24 PM
Edited by: user1202074 on Feb 7, 2012 4:24 PMIt must be coming from the commented-out <applet> tag somehow.
You aren't specifying an 'id' element. See the Deploy Java Toolkit documentation. -
Unable to load resource error while starting Integration Repository
Hi all,
Kindly help me with this...
following is my situation :
installed jre1.4.2_08 & jws from sunsite....
i'm getting into XI Start page but repository & directory link is not operational with 'Unable to load resource : <some jar file> '...
in my JWS : File->preferences-->java tab ....there is only one version which is 1.4.2_08....
Pls advise me what should i do ?
surprisingly i've got other people working in different location on the same server which is working FINE
Thanks in advanceHi Udo,
I just did what that URL advised...but still getting the same error ?
An error occurred while launching/running the application.
Title: Integration Builder
Vendor: SAP AG
Category: Download Error
Unable to load resource: http://in-ccuapp003:50000/rep/repository/aii_ibrep_client.jar
Kindly help....
Thanks -
Recently upgraded PC with latest edition of iTunes (1/30/2014), afterwards, received this error message while attempting to sync iphone with PC: Unable to load, resource not found, SyncUICoreLocalized.dll
THIS HAS EVERY APPEARANCE OF A SOFTWARE GLITCH BY APPLE ... So first suggestion is NOT to begin reinstalling various software but to await some answer & fix from Apple. Too many have same problem on various systems, in my view (I am not an Apple rep but have certainly faced many glitches over the years).
PS - LOTS of Apple software problems these days, including many people having their Contacts shredded. What's going on with Apple? -
PC Suite Error message - "Unable to load resources...
Hi I have just updated to PC Suite 7.0.9.2 and constantly get the following error message popping up - Unable to load resources - c:/program files\nokia\nokia pc suite\Lang\PcSynch2_eng.nir.
Has this been reported before? Cheers
Details as follows:
PC Connectivity Solution:
Version 8.22.4.0
[Nokia Connectivity Cable Driver:]
Version 7.0.2.1
Operating system:
Microsoft Windows Vista 32-bit Edition, Service Pack 1
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0
- Mozilla Firefox
Detected Bluetooth stacks:
- Microsoft (Version: 6.0.6000, Build: 16386)This has been reported, yes. It would seem a previous the regitry points PCSuite to install the 'lang' files from an old folder, and therefore cannot locate them. Can you make sure that this file 'PcSynch2_eng.nlr' is in the folder nokia\nokia pc suite\Lang and not in 'nokia pc suite 7' which it probably is. If so, create a folder 'nokia pc suite' (without the 7) and copy the contents of 'nokia pc suite 7' to it. It will resolve the issue.
-
PC Suite 7.0.7.0 Error: Unable to load resources
When my Nokia N95 8Gb connects to PC Suite by bluetooth I get a pop-up error message which says:
Unable to load resources:
C:\Program Files\Nokia\Nokia PC Suite 6\Lang\PcSync2_eng.nlr
How do I fix this problem?
My PC is running Windows Vista Home Premium with SP 1.Go to C:\Program Files\Nokia, right-click (mouse) on a blank area then left-click on "New" & "Folder". This creates a 'directory' called "New Folder". Right click on this new folder and select 'rename' and rename it to "Nokia PC Suite 6". Next, open this folder, and repeat the process to create a new folder and rename it to "Lang".
Hope this helps. -
Please : WWC-43273 - ContainerException: Unable to load resource bundle
Please Help :(
Development Environment:
Application : Hello World Portlet
OAS : 10.1.2.0.2 Installed on LocalHost
Development Tool : JDeveloper 10.1.3.2.0
Portal Server : 10.1.4 Installed on LocalHost
I have followed following Tutorial for the same : http://www.oracle.com/technology/obe/obe1014portal/standards_portlets/stdsplts.htm
My EAR WSDL (http://localhost/HelloWorld/portlets?WSDL) in OAS is working perfectly fine yeilding following output :
<?xml version = '1.0' encoding = 'UTF-8'?>
<wsdl:definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:bind="urn:oasis:names:tc:wsrp:v1:bind" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="urn:oasis:names:tc:wsrp:v1:wsdl">
<import namespace="urn:oasis:names:tc:wsrp:v1:bind" location="http://www.oasis-open.org/committees/wsrp/specifications/version1/wsrp_v1_bindings.wsdl"/>
<wsdl:service name="WSRPService">
<wsdl:port binding="bind:WSRP_v1_Markup_Binding_SOAP" name="WSRPBaseService">
<soap:address location="http://infra:80/HelloWorld/portlets/WSRPBaseService"/>
</wsdl:port>
<wsdl:port binding="bind:WSRP_v1_ServiceDescription_Binding_SOAP" name="WSRPServiceDescriptionService">
<soap:address location="http://infra:80/HelloWorld/portlets/WSRPServiceDescriptionService"/>
</wsdl:port>
<wsdl:port binding="bind:WSRP_v1_Registration_Binding_SOAP" name="WSRPRegistrationService">
<soap:address location="http://infra:80/HelloWorld/portlets/WSRPRegistrationService"/>
</wsdl:port>
<wsdl:port binding="bind:WSRP_v1_PortletManagement_Binding_SOAP" name="WSRPPortletManagementService">
<soap:address location="http://infra:80/HelloWorld/portlets/WSRPPortletManagementService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
However when i try to access the same via Register Provider wizard in Portal Server 10.1.4 i get this exception.
An error occurred during the call to the WSRP Provider: Java stack trace from root exception:
java.rmi.ServerException: Internal Server Error (java.lang.RuntimeException: oracle.webdb.wsrp.server.ContainerException: Unable to load resource bundle "portlet.resource.CHelloWorldBundle")
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
at oracle.webdb.wsrp.WSRP_v1_ServiceDescription_PortType_Stub.getServiceDescription(WSRP_v1_ServiceDescription_PortType_Stub.java:63)
at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_ServiceDescription_PortType.getServiceDescription(Unknown Source)Found the solution:
I needed to choose the Servlet 2.3/JSP 1.2 (J2EE 1.3) when creating my JSR268 Portlet.
Also the second change I needed to make was to use J2SE ver. 1.4.2_12. To do this change the default j2se ver. of JDeveloper(i.e ver. 1.5) from project properties > libraries node > edit/change j2se definitions screen and select java.exe from j2se1.4.2_12/bin -
JavaFX application deployment problem - Error: Unable to load resource
I am developing my first JavaFX application. When I install the jnlp and jar files on my web server I have no problems using the application from either my development machine (Windows XP) or my test machines (Windows XP & Mac OS X). However, one person evaluating the application reports getting the following error:
Error: Unable to load resource: http://dl.javafx.com/1.3/javafx-rt-windows-i586__V1.3.0_b412.jar
What are the possible causes of this problem and how can they be resolved?If being able to redistribute the JavaFX runtime is important to you, make sure you let Oracle know. Personally I'd prefer to host it myself or bundle it with an application installer. Being forced to rely on dl.javafx.com isn't acceptable for me.
[http://javafx.uservoice.com/forums/33584-official-javafx-feedback-forum/suggestions/403105-allow-us-to-distribute-the-javafx-runtime-binary?ref=title]
Edited by: jptech on Jun 18, 2010 8:36 PM -
Unable to load resource bundles in Flex 4.5 mobile
Hi All,
Starting to localize my strings in my first mobile application and for some reason... resourceManager is not finding my strings.
My project structure is as follows:
src/assets/locale/en_US
resources.properties
My compiler args are:
-locale=en_US -source-path=assets/locale/{locale} -allow-source-path-overlap=true
My first test is to externalize my first views title, but resourceManager fails to load my resource:
views.loginView.title=Login
Not sure what I am doing wrong, I am compiling my web client in Flex 4.5/Flash Builder Burito no problem but my mobile client is not finding my strings. Have tried cleaning ect...nothing... I also tried excluding the -source-path compiler args and added the new source path to Flash Builder but same result.
Any help much appreciated.
GregWell, my resource bundles where not being compiled into my application due
to a missing meta tag instruction informing the compiler to include it.
<fx:Metadata>
[ResourceBundle("resources")
</fx:Metadata>
As per the 13 errors... they seem to have gone away now and have not seen them since adding the metadata tag.
Great doc on the subject http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7fcf.html. Unfortunately, when I skimmed through it I missed the 'Using resource bundles' section that describes the metadata tag usage.
Thanks for listening :-)
Good Adobe -
GWTMSTMP - Unable to load resource file
I'm working on getting a script up and running for Groupwise 2012 and I need gwtmstmp to work. Whenever it's called, this error message is generated:
Load of Resource File (/opt/novell/groupwise/agents/bin/../lib/gwtsaxce.fil) failed - error - 8209 for lang 'ce'
Trying 'us' Resource File.
Load of Resource File (/opt/novell/groupwise/agents/bin/../lib/gwtsaxce.fil) failed - error - 8209 for lang 'en'
I'm running SLES-10 SP3 with Groupwise 2012 at the latest patch level.
Any one with an idea of how I might resolve this problem?
Thanks.In article <[email protected]>, Ssmusupport
wrote:
> I'm running SLES-10 SP3 with Groupwise 2012 at the latest patch level.
>
> Any one with an idea of how I might resolve this problem?
>
By any chance was this installed at one level of 2012 and then patched?
It does feel like perhaps one was the Multilingual and the other was
English only.
The English only install I am looking at only has
/opt/novell/groupwise/agents/lib/gwtsaxen.fil, not the ce one your
system is looking for
And while /opt/novell/groupwise/agents/bin/../lib/ does map to
/opt/novell/groupwise/agents/bin/lib/ it does look odd, is it actually
doing that?
On a pair of GW 2012 sp2 English systems I am looking at right now.
.agents/bin/gwtmstmp and .agents/lib/gw*en.fil are all dated March 25,
2013 There are no .agents/lib/gw*??.fil other than the en ones.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks! -
I attempt to run Integration Repository and get the following error when starting Java Web start...the following is from Java Web start log: (run on windows xp/ IE 7)
An error occurred while launching/running the application.
Title: Integration Builder
Vendor: SAP AG
Category: Download Error
Unable to load resource: http://xiserver2:50000/rep/repository/aii_ibrep_client.jar
This is the Exception:
=====================================================
JNLPException[category: Download Error : Exception: java.net.ConnectException: Connection timed out: connect : LaunchDesc: null ]
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.getDownloadSize(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
=====================================================
I have tried downloading the jar file to the java folder and it did not work.
Can someone help?
I am using a remote login by the way.
Thanks..
Bobby.Hi Bobby,
just see the below blogs,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/sameer.shadab/blog/2005/11/27/java-web-start
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Kind Regards
Francis -
Loading resource module from private folder.
Hi,
I have client(AIR)-server(Java) application working with many locales. Every now and then someone finds a bug in translation and repairs it. Whenever somebody updates translation (via other tool wchich also creates new xx_XXresourceModule.swf on the server) it's created new resource module. From this reason I want to have resourceModules located on server. Changing resource on server will spread this change on each client during client initialization. Client during starting checks "somehow" whether there is newer resource module on server side and if there is then it should download and loads it.
The reason why I don't want to just call IResourceManager.loadResourceModule(serverURL+resourceModule.swf) every time client start is quicker client start up. If there isn't newer localization it uses the one which was dowloaded and stored earlier during former start.
The problem is that when I download resourceModule.swf I could store it only into File.documentsDirectory where I have WRITE rights. But later on I am not able to load resource module via IResourceManager.loadResourceModule(). It complains "Unable to load resource module from: file:///c:/documents and settings/user/MyDocuments/resourceModule.swf" Do I miss something or is it possible to call loadResourceModule() when the SWF file is located somewhere in myDocument folder?
Any idea how to solve it?
//pysoAIR had a security restriction that you can only load modules from the app directory (i.e. the same folder the application was installed to). However they added a loadBytes(...) function to allow a module to be loaded that had been downloaded. I don't know if this was added to the resource stuff however.
You cannot blindly add modules to the app directory either (at least ones that weren't part of the initial install) as the AIR runtime tries to work out from the directory whether it needs to update itself, and adding files in there confuses it (so say Adobe).
I actually think you might be stuffed unless you create a new version of your AIR application with the new resource bundle, and distribute it as an update.
Gk.
Gregor Kiddie
Senior Developer
INPS
Tel: 01382 564343
Registered address: The Bread Factory, 1a Broughton Street, London SW8 3QJ
Registered Number: 1788577
Registered in the UK
Visit our Internet Web site at www.inps.co.uk
The information in this internet email is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is not authorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of INPS or any of its affiliates. If you are not the intended recipient please contact [email protected]
Maybe you are looking for
-
Ipod nano 6g will not sync OR charge! (not happy)
i bought a ipod nano 6g but 3-4 hours ago and its not syncing. It is not recognized by my comp nor itunes. Not only that it it isnt charging either. I had downloaded the latest version of itunes. I did the diagnostics test and every test passed excep
-
Can anyone tell me what happens when you connect an external HD to a Time Capsule? Does the TC recognise the new drive and treat it as more capacity and therefor continue to do backups spilling over onto the new drive? Or does it just see it as anoth
-
URGENT PLEASE HELP-Session State Provider for 8i.
We are looking for a SESSION STATE PROVIDER for .NET 2.0 for Oracle 8i. Please help to find a solution. The current installation on the Oracle website does not work for 8i. Thanks a BILLION in advance.
-
This is re:398 nature template I'm using CC, if that matters. I'm amateur, please be kind If you will kindly reference the template, I will compensate with appreciation. Problem A.) I have tried for HOURS--cannot make this image fill the page (I plan
-
Weird auto punch bug in Logic Pro X
I set up for an auto punch. Hit record and the auto punch works fine, however it creates what looks like a midi punch on an adjacent track, that wasn't even selected. I can delete this weird midi punch and reconnect the audio file and the adjacent tr